Token MirthMoney

 

Overview ERC20

Price
$0.00 @ 0.000000 ETH
Fully Diluted Market Cap
Total Supply:
1,000,000,000,000,000 MIRTH

Holders:
249,928 addresses
Contract:
0xce12bb556677709afb58347a9ad38c8503c8288a0xce12bB556677709Afb58347A9Ad38C8503c8288A

Decimals:
18

Social Profiles:
Not Available, Update ?

Balance
1,000,000,000 MIRTH

Value
$0.00
0x1dDcaa4Ed761428ae348BEfC6718BCb12e63bFaa
Loading
[ Download CSV Export  ] 
Loading
[ Download CSV Export  ] 
Loading

Click here to update the token ICO / general information
# Exchange Pair Price  24H Volume % Volume

Contract Source Code Verified (Exact Match)

Contract Name:
MirthMoney

Compiler Version
v0.8.25+commit.b61c2a91

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion, MIT license
/**
 *Submitted for verification at Arbiscan.io on 2024-03-23
*/

// File: @openzeppelin/contracts/interfaces/draft-IERC6093.sol


// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;


/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// File: @openzeppelin/contracts/token/ERC20/ERC20.sol


// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// File: MirthMoney.sol


pragma solidity ^0.8.0;


contract MirthMoney is ERC20 {
    constructor() ERC20("MirthMoney", "MIRTH") {
        _mint(msg.sender, 1000000000000000 * (10 ** uint256(decimals())));
    }
}

Contract Security Audit

Contract ABI

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"}]

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

Deployed Bytecode

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

Deployed ByteCode Sourcemap

22685:166:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13297:91;;;:::i;:::-;;;;;;;:::i;:::-;;;;;;;;15590:190;;;;;;:::i;:::-;;:::i;:::-;;;1039:14:1;;1032:22;1014:41;;1002:2;987:18;15590:190:0;874:187:1;14399:99:0;14478:12;;14399:99;;;1212:25:1;;;1200:2;1185:18;14399:99:0;1066:177:1;16358:249:0;;;;;;:::i;:::-;;:::i;14250:84::-;;;14324:2;1723:36:1;;1711:2;1696:18;14250:84:0;1581:184:1;14561:118:0;;;;;;:::i;:::-;-1:-1:-1;;;;;14653:18:0;14626:7;14653:18;;;;;;;;;;;;14561:118;13507:95;;;:::i;14884:182::-;;;;;;:::i;:::-;;:::i;15129:142::-;;;;;;:::i;:::-;-1:-1:-1;;;;;15236:18:0;;;15209:7;15236:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;;;;15129:142;13297:91;13342:13;13375:5;13368:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13297:91;:::o;15590:190::-;15663:4;7505:10;15719:31;7505:10;15735:7;15744:5;15719:8;:31::i;:::-;15768:4;15761:11;;;15590:190;;;;;:::o;16358:249::-;16445:4;7505:10;16503:37;16519:4;7505:10;16534:5;16503:15;:37::i;:::-;16551:26;16561:4;16567:2;16571:5;16551:9;:26::i;:::-;-1:-1:-1;16595:4:0;;16358:249;-1:-1:-1;;;;16358:249:0:o;13507:95::-;13554:13;13587:7;13580:14;;;;;:::i;14884:182::-;14953:4;7505:10;15009:27;7505:10;15026:2;15030:5;15009:9;:27::i;20417:130::-;20502:37;20511:5;20518:7;20527:5;20534:4;20502:8;:37::i;:::-;20417:130;;;:::o;22133:487::-;-1:-1:-1;;;;;15236:18:0;;;22233:24;15236:18;;;:11;:18;;;;;;;;:27;;;;;;;;;;-1:-1:-1;;22300:37:0;;22296:317;;22377:5;22358:16;:24;22354:132;;;22410:60;;-1:-1:-1;;;22410:60:0;;-1:-1:-1;;;;;2831:32:1;;22410:60:0;;;2813:51:1;2880:18;;;2873:34;;;2923:18;;;2916:34;;;2786:18;;22410:60:0;;;;;;;;22354:132;22529:57;22538:5;22545:7;22573:5;22554:16;:24;22580:5;22529:8;:57::i;:::-;22222:398;22133:487;;;:::o;16992:308::-;-1:-1:-1;;;;;17076:18:0;;17072:88;;17118:30;;-1:-1:-1;;;17118:30:0;;17145:1;17118:30;;;3107:51:1;3080:18;;17118:30:0;2961:203:1;17072:88:0;-1:-1:-1;;;;;17174:16:0;;17170:88;;17214:32;;-1:-1:-1;;;17214:32:0;;17243:1;17214:32;;;3107:51:1;3080:18;;17214:32:0;2961:203:1;17170:88:0;17268:24;17276:4;17282:2;17286:5;17268:7;:24::i;21398:443::-;-1:-1:-1;;;;;21511:19:0;;21507:91;;21554:32;;-1:-1:-1;;;21554:32:0;;21583:1;21554:32;;;3107:51:1;3080:18;;21554:32:0;2961:203:1;21507:91:0;-1:-1:-1;;;;;21612:21:0;;21608:92;;21657:31;;-1:-1:-1;;;21657:31:0;;21685:1;21657:31;;;3107:51:1;3080:18;;21657:31:0;2961:203:1;21608:92:0;-1:-1:-1;;;;;21710:18:0;;;;;;;:11;:18;;;;;;;;:27;;;;;;;;;:35;;;21756:78;;;;21807:7;-1:-1:-1;;;;;21791:31:0;21800:5;-1:-1:-1;;;;;21791:31:0;;21816:5;21791:31;;;;1212:25:1;;1200:2;1185:18;;1066:177;21791:31:0;;;;;;;;21398:443;;;;:::o;17624:1135::-;-1:-1:-1;;;;;17714:18:0;;17710:552;;17868:5;17852:12;;:21;;;;;;;:::i;:::-;;;;-1:-1:-1;17710:552:0;;-1:-1:-1;17710:552:0;;-1:-1:-1;;;;;17928:15:0;;17906:19;17928:15;;;;;;;;;;;17962:19;;;17958:117;;;18009:50;;-1:-1:-1;;;18009:50:0;;-1:-1:-1;;;;;2831:32:1;;18009:50:0;;;2813:51:1;2880:18;;;2873:34;;;2923:18;;;2916:34;;;2786:18;;18009:50:0;2611:345:1;17958:117:0;-1:-1:-1;;;;;18198:15:0;;:9;:15;;;;;;;;;;18216:19;;;;18198:37;;17710:552;-1:-1:-1;;;;;18278:16:0;;18274:435;;18444:12;:21;;;;;;;18274:435;;;-1:-1:-1;;;;;18660:13:0;;:9;:13;;;;;;;;;;:22;;;;;;18274:435;18741:2;-1:-1:-1;;;;;18726:25:0;18735:4;-1:-1:-1;;;;;18726:25:0;;18745:5;18726:25;;;;1212::1;;1200:2;1185:18;;1066:177;18726:25:0;;;;;;;;17624:1135;;;:::o;14:418:1:-;163:2;152:9;145:21;126:4;195:6;189:13;238:6;233:2;222:9;218:18;211:34;297:6;292:2;284:6;280:15;275:2;264:9;260:18;254:50;353:1;348:2;339:6;328:9;324:22;320:31;313:42;423:2;416;412:7;407:2;399:6;395:15;391:29;380:9;376:45;372:54;364:62;;;14:418;;;;:::o;437:173::-;505:20;;-1:-1:-1;;;;;554:31:1;;544:42;;534:70;;600:1;597;590:12;534:70;437:173;;;:::o;615:254::-;683:6;691;744:2;732:9;723:7;719:23;715:32;712:52;;;760:1;757;750:12;712:52;783:29;802:9;783:29;:::i;:::-;773:39;859:2;844:18;;;;831:32;;-1:-1:-1;;;615:254:1:o;1248:328::-;1325:6;1333;1341;1394:2;1382:9;1373:7;1369:23;1365:32;1362:52;;;1410:1;1407;1400:12;1362:52;1433:29;1452:9;1433:29;:::i;:::-;1423:39;;1481:38;1515:2;1504:9;1500:18;1481:38;:::i;:::-;1471:48;;1566:2;1555:9;1551:18;1538:32;1528:42;;1248:328;;;;;:::o;1770:186::-;1829:6;1882:2;1870:9;1861:7;1857:23;1853:32;1850:52;;;1898:1;1895;1888:12;1850:52;1921:29;1940:9;1921:29;:::i;:::-;1911:39;1770:186;-1:-1:-1;;;1770:186:1:o;1961:260::-;2029:6;2037;2090:2;2078:9;2069:7;2065:23;2061:32;2058:52;;;2106:1;2103;2096:12;2058:52;2129:29;2148:9;2129:29;:::i;:::-;2119:39;;2177:38;2211:2;2200:9;2196:18;2177:38;:::i;:::-;2167:48;;1961:260;;;;;:::o;2226:380::-;2305:1;2301:12;;;;2348;;;2369:61;;2423:4;2415:6;2411:17;2401:27;;2369:61;2476:2;2468:6;2465:14;2445:18;2442:38;2439:161;;2522:10;2517:3;2513:20;2510:1;2503:31;2557:4;2554:1;2547:15;2585:4;2582:1;2575:15;2439:161;;2226:380;;;:::o;3169:222::-;3234:9;;;3255:10;;;3252:133;;;3307:10;3302:3;3298:20;3295:1;3288:31;3342:4;3339:1;3332:15;3370:4;3367:1;3360:15

Metadata Hash

ipfs://17433f9dfcc798a2364f03c0d43b30c37758a92fd25c7c4d624caa5e2d45ae39
Loading