Token Marauder

 

Overview ERC-721

Total Supply:
4,326 MRDR

Holders:
1,010 addresses
Balance
0 MRDR
0x6Eb3A741FA79eC529e1541Abf185a726ff465cc7
Loading
[ Download CSV Export  ] 
Loading
[ Download CSV Export  ] 
Loading

Click here to update the token ICO / general information
# Exchange Pair Price  24H Volume % Volume

Contract Source Code Verified (Exact Match)

Contract Name:
Marauder

Compiler Version
v0.8.20+commit.a1b79de6

Optimization Enabled:
Yes with 200 runs

Other Settings:
paris EvmVersion
File 1 of 9 : ReentrancyGuard.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

File 2 of 9 : IERC721Bound.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.4;

interface IERC721Bound {
  function unbind(
    address[] calldata _addresses,
    uint256[] calldata _tokenIds
  ) external;

  function unbind(address _addr, uint256 _tokenId) external;

  function isUnbound(
    address _addr,
    uint256 _tokenId
  ) external view returns (bool);
}

File 3 of 9 : ERC721A.sol
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.1.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import "./IERC721A.sol";

/**
 * @dev ERC721 token receiver interface.
 */
interface ERC721A__IERC721Receiver {
  function onERC721Received(
    address operator,
    address from,
    uint256 tokenId,
    bytes calldata data
  ) external returns (bytes4);
}

/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard,
 * including the Metadata extension. Built to optimize for lower gas during batch mints.
 *
 * Assumes serials are sequentially minted starting at `_startTokenId()`
 * (defaults to 0, e.g. 0, 1, 2, 3..).
 *
 * Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 *
 * Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is IERC721A {
  // Mask of an entry in packed address data.
  uint256 private constant BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;

  // The bit position of `numberMinted` in packed address data.
  uint256 private constant BITPOS_NUMBER_MINTED = 64;

  // The bit position of `numberBurned` in packed address data.
  uint256 private constant BITPOS_NUMBER_BURNED = 128;

  // The bit position of `aux` in packed address data.
  uint256 private constant BITPOS_AUX = 192;

  // Mask of all 256 bits in packed address data except the 64 bits for `aux`.
  uint256 private constant BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;

  // The bit position of `startTimestamp` in packed ownership.
  uint256 private constant BITPOS_START_TIMESTAMP = 160;

  // The bit mask of the `burned` bit in packed ownership.
  uint256 private constant BITMASK_BURNED = 1 << 224;

  // The bit position of the `nextInitialized` bit in packed ownership.
  uint256 private constant BITPOS_NEXT_INITIALIZED = 225;

  // The bit mask of the `nextInitialized` bit in packed ownership.
  uint256 private constant BITMASK_NEXT_INITIALIZED = 1 << 225;

  // The bit position of `extraData` in packed ownership.
  uint256 private constant BITPOS_EXTRA_DATA = 232;

  // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
  uint256 private constant BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;

  // The mask of the lower 160 bits for addresses.
  uint256 private constant BITMASK_ADDRESS = (1 << 160) - 1;

  // The maximum `quantity` that can be minted with `_mintERC2309`.
  // This limit is to prevent overflows on the address data entries.
  // For a limit of 5000, a total of 3.689e15 calls to `_mintERC2309`
  // is required to cause an overflow, which is unrealistic.
  uint256 private constant MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;

  // The tokenId of the next token to be minted.
  uint256 private _currentIndex;

  // The number of tokens burned.
  uint256 private _burnCounter;

  // Token name
  string private _name;

  // Token symbol
  string private _symbol;

  // Mapping from token ID to ownership details
  // An empty struct value does not necessarily mean the token is unowned.
  // See `_packedOwnershipOf` implementation for details.
  //
  // Bits Layout:
  // - [0..159]   `addr`
  // - [160..223] `startTimestamp`
  // - [224]      `burned`
  // - [225]      `nextInitialized`
  // - [232..255] `extraData`
  mapping(uint256 => uint256) private _packedOwnerships;

  // Mapping owner address to address data.
  //
  // Bits Layout:
  // - [0..63]    `balance`
  // - [64..127]  `numberMinted`
  // - [128..191] `numberBurned`
  // - [192..255] `aux`
  mapping(address => uint256) private _packedAddressData;

  // Mapping from token ID to approved address.
  mapping(uint256 => address) private _tokenApprovals;

  // Mapping from owner to operator approvals
  mapping(address => mapping(address => bool)) private _operatorApprovals;

  constructor(string memory name_, string memory symbol_) {
    _name = name_;
    _symbol = symbol_;
    _currentIndex = _startTokenId();
  }

  /**
   * @dev Returns the starting token ID.
   * To change the starting token ID, please override this function.
   */
  function _startTokenId() internal view virtual returns (uint256) {
    return 0;
  }

  /**
   * @dev Returns the next token ID to be minted.
   */
  function _nextTokenId() internal view returns (uint256) {
    return _currentIndex;
  }

  /**
   * @dev Returns the total number of tokens in existence.
   * Burned tokens will reduce the count.
   * To get the total number of tokens minted, please see `_totalMinted`.
   */
  function totalSupply() public view override returns (uint256) {
    // Counter underflow is impossible as _burnCounter cannot be incremented
    // more than `_currentIndex - _startTokenId()` times.
    unchecked {
      return _currentIndex - _burnCounter - _startTokenId();
    }
  }

  /**
   * @dev Returns the total amount of tokens minted in the contract.
   */
  function _totalMinted() internal view returns (uint256) {
    // Counter underflow is impossible as _currentIndex does not decrement,
    // and it is initialized to `_startTokenId()`
    unchecked {
      return _currentIndex - _startTokenId();
    }
  }

  /**
   * @dev Returns the total number of tokens burned.
   */
  function _totalBurned() internal view returns (uint256) {
    return _burnCounter;
  }

  /**
   * @dev See {IERC165-supportsInterface}.
   */
  function supportsInterface(
    bytes4 interfaceId
  ) public view virtual override returns (bool) {
    // The interface IDs are constants representing the first 4 bytes of the XOR of
    // all function selectors in the interface. See: https://eips.ethereum.org/EIPS/eip-165
    // e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`
    return
      interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
      interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
      interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
  }

  /**
   * @dev See {IERC721-balanceOf}.
   */
  function balanceOf(address owner) public view override returns (uint256) {
    if (owner == address(0)) revert BalanceQueryForZeroAddress();
    return _packedAddressData[owner] & BITMASK_ADDRESS_DATA_ENTRY;
  }

  /**
   * Returns the number of tokens minted by `owner`.
   */
  function _numberMinted(address owner) internal view returns (uint256) {
    return
      (_packedAddressData[owner] >> BITPOS_NUMBER_MINTED) &
      BITMASK_ADDRESS_DATA_ENTRY;
  }

  /**
   * Returns the number of tokens burned by or on behalf of `owner`.
   */
  function _numberBurned(address owner) internal view returns (uint256) {
    return
      (_packedAddressData[owner] >> BITPOS_NUMBER_BURNED) &
      BITMASK_ADDRESS_DATA_ENTRY;
  }

  /**
   * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
   */
  function _getAux(address owner) internal view returns (uint64) {
    return uint64(_packedAddressData[owner] >> BITPOS_AUX);
  }

  /**
   * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
   * If there are multiple variables, please pack them into a uint64.
   */
  function _setAux(address owner, uint64 aux) internal {
    uint256 packed = _packedAddressData[owner];
    uint256 auxCasted;
    // Cast `aux` with assembly to avoid redundant masking.
    assembly {
      auxCasted := aux
    }
    packed = (packed & BITMASK_AUX_COMPLEMENT) | (auxCasted << BITPOS_AUX);
    _packedAddressData[owner] = packed;
  }

  /**
   * Returns the packed ownership data of `tokenId`.
   */
  function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
    uint256 curr = tokenId;

    unchecked {
      if (_startTokenId() <= curr)
        if (curr < _currentIndex) {
          uint256 packed = _packedOwnerships[curr];
          // If not burned.
          if (packed & BITMASK_BURNED == 0) {
            // Invariant:
            // There will always be an ownership that has an address and is not burned
            // before an ownership that does not have an address and is not burned.
            // Hence, curr will not underflow.
            //
            // We can directly compare the packed value.
            // If the address is zero, packed is zero.
            while (packed == 0) {
              packed = _packedOwnerships[--curr];
            }
            return packed;
          }
        }
    }
    revert OwnerQueryForNonexistentToken();
  }

  /**
   * Returns the unpacked `TokenOwnership` struct from `packed`.
   */
  function _unpackedOwnership(
    uint256 packed
  ) private pure returns (TokenOwnership memory ownership) {
    ownership.addr = address(uint160(packed));
    ownership.startTimestamp = uint64(packed >> BITPOS_START_TIMESTAMP);
    ownership.burned = packed & BITMASK_BURNED != 0;
    ownership.extraData = uint24(packed >> BITPOS_EXTRA_DATA);
  }

  /**
   * Returns the unpacked `TokenOwnership` struct at `index`.
   */
  function _ownershipAt(
    uint256 index
  ) internal view returns (TokenOwnership memory) {
    return _unpackedOwnership(_packedOwnerships[index]);
  }

  /**
   * @dev Initializes the ownership slot minted at `index` for efficiency purposes.
   */
  function _initializeOwnershipAt(uint256 index) internal {
    if (_packedOwnerships[index] == 0) {
      _packedOwnerships[index] = _packedOwnershipOf(index);
    }
  }

  /**
   * Gas spent here starts off proportional to the maximum mint batch size.
   * It gradually moves to O(1) as tokens get transferred around in the collection over time.
   */
  function _ownershipOf(
    uint256 tokenId
  ) internal view returns (TokenOwnership memory) {
    return _unpackedOwnership(_packedOwnershipOf(tokenId));
  }

  /**
   * @dev Packs ownership data into a single uint256.
   */
  function _packOwnershipData(
    address owner,
    uint256 flags
  ) private view returns (uint256 result) {
    assembly {
      // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
      owner := and(owner, BITMASK_ADDRESS)
      // `owner | (block.timestamp << BITPOS_START_TIMESTAMP) | flags`.
      result := or(owner, or(shl(BITPOS_START_TIMESTAMP, timestamp()), flags))
    }
  }

  /**
   * @dev See {IERC721-ownerOf}.
   */
  function ownerOf(uint256 tokenId) public view override returns (address) {
    return address(uint160(_packedOwnershipOf(tokenId)));
  }

  /**
   * @dev See {IERC721Metadata-name}.
   */
  function name() public view virtual override returns (string memory) {
    return _name;
  }

  /**
   * @dev See {IERC721Metadata-symbol}.
   */
  function symbol() public view virtual override returns (string memory) {
    return _symbol;
  }

  /**
   * @dev See {IERC721Metadata-tokenURI}.
   */
  function tokenURI(
    uint256 tokenId
  ) public view virtual override returns (string memory) {
    if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

    string memory baseURI = _baseURI();
    return
      bytes(baseURI).length != 0
        ? string(abi.encodePacked(baseURI, _toString(tokenId)))
        : "";
  }

  /**
   * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
   * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
   * by default, it can be overridden in child contracts.
   */
  function _baseURI() internal view virtual returns (string memory) {
    return "";
  }

  /**
   * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
   */
  function _nextInitializedFlag(
    uint256 quantity
  ) private pure returns (uint256 result) {
    // For branchless setting of the `nextInitialized` flag.
    assembly {
      // `(quantity == 1) << BITPOS_NEXT_INITIALIZED`.
      result := shl(BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
    }
  }

  /**
   * @dev See {IERC721-approve}.
   */
  function approve(address to, uint256 tokenId) public override {
    address owner = ownerOf(tokenId);

    if (_msgSenderERC721A() != owner)
      if (!isApprovedForAll(owner, _msgSenderERC721A())) {
        revert ApprovalCallerNotOwnerNorApproved();
      }

    _tokenApprovals[tokenId] = to;
    emit Approval(owner, to, tokenId);
  }

  /**
   * @dev See {IERC721-getApproved}.
   */
  function getApproved(uint256 tokenId) public view override returns (address) {
    if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

    return _tokenApprovals[tokenId];
  }

  /**
   * @dev See {IERC721-setApprovalForAll}.
   */
  function setApprovalForAll(
    address operator,
    bool approved
  ) public virtual override {
    if (operator == _msgSenderERC721A()) revert ApproveToCaller();

    _operatorApprovals[_msgSenderERC721A()][operator] = approved;
    emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
  }

  /**
   * @dev See {IERC721-isApprovedForAll}.
   */
  function isApprovedForAll(
    address owner,
    address operator
  ) public view virtual override returns (bool) {
    return _operatorApprovals[owner][operator];
  }

  /**
   * @dev See {IERC721-safeTransferFrom}.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId
  ) public virtual override {
    safeTransferFrom(from, to, tokenId, "");
  }

  /**
   * @dev See {IERC721-safeTransferFrom}.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId,
    bytes memory _data
  ) public virtual override {
    transferFrom(from, to, tokenId);
    if (to.code.length != 0)
      if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
        revert TransferToNonERC721ReceiverImplementer();
      }
  }

  /**
   * @dev Returns whether `tokenId` exists.
   *
   * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
   *
   * Tokens start existing when they are minted (`_mint`),
   */
  function _exists(uint256 tokenId) internal view returns (bool) {
    return
      _startTokenId() <= tokenId &&
      tokenId < _currentIndex && // If within bounds,
      _packedOwnerships[tokenId] & BITMASK_BURNED == 0; // and not burned.
  }

  /**
   * @dev Equivalent to `_safeMint(to, quantity, '')`.
   */
  function _safeMint(address to, uint256 quantity) internal returns (uint256) {
    return _safeMint(to, quantity, "");
  }

  /**
   * @dev Safely mints `quantity` tokens and transfers them to `to`.
   *
   * Requirements:
   *
   * - If `to` refers to a smart contract, it must implement
   *   {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
   * - `quantity` must be greater than 0.
   *
   * See {_mint}.
   *
   * Emits a {Transfer} event for each mint.
   */
  function _safeMint(
    address to,
    uint256 quantity,
    bytes memory _data
  ) internal returns (uint256) {
    uint256 startTokenId = _mint(to, quantity);

    unchecked {
      if (to.code.length != 0) {
        uint256 end = _currentIndex;
        uint256 index = end - quantity;
        do {
          if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
            revert TransferToNonERC721ReceiverImplementer();
          }
        } while (index < end);
        // Reentrancy protection.
        if (_currentIndex != end) revert();
      }
    }

    return startTokenId;
  }

  /**
   * @dev Mints `quantity` tokens and transfers them to `to`.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - `quantity` must be greater than 0.
   *
   * Emits a {Transfer} event for each mint.
   */
  function _mint(address to, uint256 quantity) internal returns (uint256) {
    uint256 startTokenId = _currentIndex;
    if (to == address(0)) revert MintToZeroAddress();
    if (quantity == 0) revert MintZeroQuantity();

    _beforeTokenTransfers(address(0), to, startTokenId, quantity);

    // Overflows are incredibly unrealistic.
    // `balance` and `numberMinted` have a maximum limit of 2**64.
    // `tokenId` has a maximum limit of 2**256.
    unchecked {
      // Updates:
      // - `balance += quantity`.
      // - `numberMinted += quantity`.
      //
      // We can directly add to the `balance` and `numberMinted`.
      _packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1);

      // Updates:
      // - `address` to the owner.
      // - `startTimestamp` to the timestamp of minting.
      // - `burned` to `false`.
      // - `nextInitialized` to `quantity == 1`.
      _packedOwnerships[startTokenId] = _packOwnershipData(
        to,
        _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
      );

      uint256 tokenId = startTokenId;
      uint256 end = startTokenId + quantity;
      do {
        emit Transfer(address(0), to, tokenId++);
      } while (tokenId < end);

      _currentIndex = end;
    }
    _afterTokenTransfers(address(0), to, startTokenId, quantity);

    return startTokenId;
  }

  /**
   * @dev Mints `quantity` tokens and transfers them to `to`.
   *
   * This function is intended for efficient minting only during contract creation.
   *
   * It emits only one {ConsecutiveTransfer} as defined in
   * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
   * instead of a sequence of {Transfer} event(s).
   *
   * Calling this function outside of contract creation WILL make your contract
   * non-compliant with the ERC721 standard.
   * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
   * {ConsecutiveTransfer} event is only permissible during contract creation.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - `quantity` must be greater than 0.
   *
   * Emits a {ConsecutiveTransfer} event.
   */
  function _mintERC2309(address to, uint256 quantity) internal {
    uint256 startTokenId = _currentIndex;
    if (to == address(0)) revert MintToZeroAddress();
    if (quantity == 0) revert MintZeroQuantity();
    if (quantity > MAX_MINT_ERC2309_QUANTITY_LIMIT)
      revert MintERC2309QuantityExceedsLimit();

    _beforeTokenTransfers(address(0), to, startTokenId, quantity);

    // Overflows are unrealistic due to the above check for `quantity` to be below the limit.
    unchecked {
      // Updates:
      // - `balance += quantity`.
      // - `numberMinted += quantity`.
      //
      // We can directly add to the `balance` and `numberMinted`.
      _packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1);

      // Updates:
      // - `address` to the owner.
      // - `startTimestamp` to the timestamp of minting.
      // - `burned` to `false`.
      // - `nextInitialized` to `quantity == 1`.
      _packedOwnerships[startTokenId] = _packOwnershipData(
        to,
        _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
      );

      emit ConsecutiveTransfer(
        startTokenId,
        startTokenId + quantity - 1,
        address(0),
        to
      );

      _currentIndex = startTokenId + quantity;
    }
    _afterTokenTransfers(address(0), to, startTokenId, quantity);
  }

  /**
   * @dev Returns the storage slot and value for the approved address of `tokenId`.
   */
  function _getApprovedAddress(
    uint256 tokenId
  )
    private
    view
    returns (uint256 approvedAddressSlot, address approvedAddress)
  {
    mapping(uint256 => address) storage tokenApprovalsPtr = _tokenApprovals;
    // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId]`.
    assembly {
      // Compute the slot.
      mstore(0x00, tokenId)
      mstore(0x20, tokenApprovalsPtr.slot)
      approvedAddressSlot := keccak256(0x00, 0x40)
      // Load the slot's value from storage.
      approvedAddress := sload(approvedAddressSlot)
    }
  }

  /**
   * @dev Returns whether the `approvedAddress` is equals to `from` or `msgSender`.
   */
  function _isOwnerOrApproved(
    address approvedAddress,
    address from,
    address msgSender
  ) private pure returns (bool result) {
    assembly {
      // Mask `from` to the lower 160 bits, in case the upper bits somehow aren't clean.
      from := and(from, BITMASK_ADDRESS)
      // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
      msgSender := and(msgSender, BITMASK_ADDRESS)
      // `msgSender == from || msgSender == approvedAddress`.
      result := or(eq(msgSender, from), eq(msgSender, approvedAddress))
    }
  }

  /**
   * @dev Transfers `tokenId` from `from` to `to`.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - `tokenId` token must be owned by `from`.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address from,
    address to,
    uint256 tokenId
  ) public virtual override {
    uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

    if (address(uint160(prevOwnershipPacked)) != from)
      revert TransferFromIncorrectOwner();

    (
      uint256 approvedAddressSlot,
      address approvedAddress
    ) = _getApprovedAddress(tokenId);

    // The nested ifs save around 20+ gas over a compound boolean condition.
    if (!_isOwnerOrApproved(approvedAddress, from, _msgSenderERC721A()))
      if (!isApprovedForAll(from, _msgSenderERC721A()))
        revert TransferCallerNotOwnerNorApproved();

    if (to == address(0)) revert TransferToZeroAddress();

    _beforeTokenTransfers(from, to, tokenId, 1);

    // Clear approvals from the previous owner.
    assembly {
      if approvedAddress {
        // This is equivalent to `delete _tokenApprovals[tokenId]`.
        sstore(approvedAddressSlot, 0)
      }
    }

    // Underflow of the sender's balance is impossible because we check for
    // ownership above and the recipient's balance can't realistically overflow.
    // Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
    unchecked {
      // We can directly increment and decrement the balances.
      --_packedAddressData[from]; // Updates: `balance -= 1`.
      ++_packedAddressData[to]; // Updates: `balance += 1`.

      // Updates:
      // - `address` to the next owner.
      // - `startTimestamp` to the timestamp of transfering.
      // - `burned` to `false`.
      // - `nextInitialized` to `true`.
      _packedOwnerships[tokenId] = _packOwnershipData(
        to,
        BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
      );

      // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
      if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) {
        uint256 nextTokenId = tokenId + 1;
        // If the next slot's address is zero and not burned (i.e. packed value is zero).
        if (_packedOwnerships[nextTokenId] == 0) {
          // If the next slot is within bounds.
          if (nextTokenId != _currentIndex) {
            // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
            _packedOwnerships[nextTokenId] = prevOwnershipPacked;
          }
        }
      }
    }

    emit Transfer(from, to, tokenId);
    _afterTokenTransfers(from, to, tokenId, 1);
  }

  /**
   * @dev Equivalent to `_burn(tokenId, false)`.
   */
  function _burn(uint256 tokenId) internal virtual {
    _burn(tokenId, false);
  }

  /**
   * @dev Destroys `tokenId`.
   * The approval is cleared when the token is burned.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   *
   * Emits a {Transfer} event.
   */
  function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
    uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

    address from = address(uint160(prevOwnershipPacked));

    (
      uint256 approvedAddressSlot,
      address approvedAddress
    ) = _getApprovedAddress(tokenId);

    if (approvalCheck) {
      // The nested ifs save around 20+ gas over a compound boolean condition.
      if (!_isOwnerOrApproved(approvedAddress, from, _msgSenderERC721A()))
        if (!isApprovedForAll(from, _msgSenderERC721A()))
          revert TransferCallerNotOwnerNorApproved();
    }

    _beforeTokenTransfers(from, address(0), tokenId, 1);

    // Clear approvals from the previous owner.
    assembly {
      if approvedAddress {
        // This is equivalent to `delete _tokenApprovals[tokenId]`.
        sstore(approvedAddressSlot, 0)
      }
    }

    // Underflow of the sender's balance is impossible because we check for
    // ownership above and the recipient's balance can't realistically overflow.
    // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
    unchecked {
      // Updates:
      // - `balance -= 1`.
      // - `numberBurned += 1`.
      //
      // We can directly decrement the balance, and increment the number burned.
      // This is equivalent to `packed -= 1; packed += 1 << BITPOS_NUMBER_BURNED;`.
      _packedAddressData[from] += (1 << BITPOS_NUMBER_BURNED) - 1;

      // Updates:
      // - `address` to the last owner.
      // - `startTimestamp` to the timestamp of burning.
      // - `burned` to `true`.
      // - `nextInitialized` to `true`.
      _packedOwnerships[tokenId] = _packOwnershipData(
        from,
        (BITMASK_BURNED | BITMASK_NEXT_INITIALIZED) |
          _nextExtraData(from, address(0), prevOwnershipPacked)
      );

      // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
      if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) {
        uint256 nextTokenId = tokenId + 1;
        // If the next slot's address is zero and not burned (i.e. packed value is zero).
        if (_packedOwnerships[nextTokenId] == 0) {
          // If the next slot is within bounds.
          if (nextTokenId != _currentIndex) {
            // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
            _packedOwnerships[nextTokenId] = prevOwnershipPacked;
          }
        }
      }
    }

    emit Transfer(from, address(0), tokenId);
    _afterTokenTransfers(from, address(0), tokenId, 1);

    // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
    unchecked {
      _burnCounter++;
    }
  }

  /**
   * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
   *
   * @param from address representing the previous owner of the given token ID
   * @param to target address that will receive the tokens
   * @param tokenId uint256 ID of the token to be transferred
   * @param _data bytes optional data to send along with the call
   * @return bool whether the call correctly returned the expected magic value
   */
  function _checkContractOnERC721Received(
    address from,
    address to,
    uint256 tokenId,
    bytes memory _data
  ) private returns (bool) {
    try
      ERC721A__IERC721Receiver(to).onERC721Received(
        _msgSenderERC721A(),
        from,
        tokenId,
        _data
      )
    returns (bytes4 retval) {
      return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
    } catch (bytes memory reason) {
      if (reason.length == 0) {
        revert TransferToNonERC721ReceiverImplementer();
      } else {
        assembly {
          revert(add(32, reason), mload(reason))
        }
      }
    }
  }

  /**
   * @dev Directly sets the extra data for the ownership data `index`.
   */
  function _setExtraDataAt(uint256 index, uint24 extraData) internal {
    uint256 packed = _packedOwnerships[index];
    if (packed == 0) revert OwnershipNotInitializedForExtraData();
    uint256 extraDataCasted;
    // Cast `extraData` with assembly to avoid redundant masking.
    assembly {
      extraDataCasted := extraData
    }
    packed =
      (packed & BITMASK_EXTRA_DATA_COMPLEMENT) |
      (extraDataCasted << BITPOS_EXTRA_DATA);
    _packedOwnerships[index] = packed;
  }

  /**
   * @dev Returns the next extra data for the packed ownership data.
   * The returned result is shifted into position.
   */
  function _nextExtraData(
    address from,
    address to,
    uint256 prevOwnershipPacked
  ) private view returns (uint256) {
    uint24 extraData = uint24(prevOwnershipPacked >> BITPOS_EXTRA_DATA);
    return uint256(_extraData(from, to, extraData)) << BITPOS_EXTRA_DATA;
  }

  /**
   * @dev Called during each token transfer to set the 24bit `extraData` field.
   * Intended to be overridden by the cosumer contract.
   *
   * `previousExtraData` - the value of `extraData` before transfer.
   *
   * Calling conditions:
   *
   * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
   * transferred to `to`.
   * - When `from` is zero, `tokenId` will be minted for `to`.
   * - When `to` is zero, `tokenId` will be burned by `from`.
   * - `from` and `to` are never both zero.
   */
  function _extraData(
    address from,
    address to,
    uint24 previousExtraData
  ) internal view virtual returns (uint24) {}

  /**
   * @dev Hook that is called before a set of serially-ordered token ids are about to be transferred.
   * This includes minting.
   * And also called before burning one token.
   *
   * startTokenId - the first token id to be transferred
   * quantity - the amount to be transferred
   *
   * Calling conditions:
   *
   * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
   * transferred to `to`.
   * - When `from` is zero, `tokenId` will be minted for `to`.
   * - When `to` is zero, `tokenId` will be burned by `from`.
   * - `from` and `to` are never both zero.
   */
  function _beforeTokenTransfers(
    address from,
    address to,
    uint256 startTokenId,
    uint256 quantity
  ) internal virtual {}

  /**
   * @dev Hook that is called after a set of serially-ordered token ids have been transferred.
   * This includes minting.
   * And also called after one token has been burned.
   *
   * startTokenId - the first token id to be transferred
   * quantity - the amount to be transferred
   *
   * Calling conditions:
   *
   * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
   * transferred to `to`.
   * - When `from` is zero, `tokenId` has been minted for `to`.
   * - When `to` is zero, `tokenId` has been burned by `from`.
   * - `from` and `to` are never both zero.
   */
  function _afterTokenTransfers(
    address from,
    address to,
    uint256 startTokenId,
    uint256 quantity
  ) internal virtual {}

  /**
   * @dev Returns the message sender (defaults to `msg.sender`).
   *
   * If you are writing GSN compatible contracts, you need to override this function.
   */
  function _msgSenderERC721A() internal view virtual returns (address) {
    return msg.sender;
  }

  /**
   * @dev Converts a `uint256` to its ASCII `string` decimal representation.
   */
  function _toString(uint256 value) internal pure returns (string memory ptr) {
    assembly {
      // The maximum value of a uint256 contains 78 digits (1 byte per digit),
      // but we allocate 128 bytes to keep the free memory pointer 32-byte word aliged.
      // We will need 1 32-byte word to store the length,
      // and 3 32-byte words to store a maximum of 78 digits. Total: 32 + 3 * 32 = 128.
      ptr := add(mload(0x40), 128)
      // Update the free memory pointer to allocate.
      mstore(0x40, ptr)

      // Cache the end of the memory to calculate the length later.
      let end := ptr

      // We write the string from the rightmost digit to the leftmost digit.
      // The following is essentially a do-while loop that also handles the zero case.
      // Costs a bit more than early returning for the zero case,
      // but cheaper in terms of deployment and overall runtime costs.
      for {
        // Initialize and perform the first pass without check.
        let temp := value
        // Move the pointer 1 byte leftwards to point to an empty character slot.
        ptr := sub(ptr, 1)
        // Write the character to the pointer. 48 is the ASCII index of '0'.
        mstore8(ptr, add(48, mod(temp, 10)))
        temp := div(temp, 10)
      } temp {
        // Keep dividing `temp` until zero.
        temp := div(temp, 10)
      } {
        // Body of the for loop.
        ptr := sub(ptr, 1)
        mstore8(ptr, add(48, mod(temp, 10)))
      }

      let length := sub(end, ptr)
      // Move the pointer 32 bytes leftwards to make room for the length.
      ptr := sub(ptr, 32)
      // Store the length.
      mstore(ptr, length)
    }
  }
}

File 4 of 9 : IERC721A.sol
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.1.0
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of an ERC721A compliant contract.
 */
interface IERC721A {
  /**
   * The caller must own the token or be an approved operator.
   */
  error ApprovalCallerNotOwnerNorApproved();

  /**
   * The token does not exist.
   */
  error ApprovalQueryForNonexistentToken();

  /**
   * The caller cannot approve to their own address.
   */
  error ApproveToCaller();

  /**
   * Cannot query the balance for the zero address.
   */
  error BalanceQueryForZeroAddress();

  /**
   * Cannot mint to the zero address.
   */
  error MintToZeroAddress();

  /**
   * The quantity of tokens minted must be more than zero.
   */
  error MintZeroQuantity();

  /**
   * The token does not exist.
   */
  error OwnerQueryForNonexistentToken();

  /**
   * The caller must own the token or be an approved operator.
   */
  error TransferCallerNotOwnerNorApproved();

  /**
   * The token must be owned by `from`.
   */
  error TransferFromIncorrectOwner();

  /**
   * Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
   */
  error TransferToNonERC721ReceiverImplementer();

  /**
   * Cannot transfer to the zero address.
   */
  error TransferToZeroAddress();

  /**
   * The token does not exist.
   */
  error URIQueryForNonexistentToken();

  /**
   * The `quantity` minted with ERC2309 exceeds the safety limit.
   */
  error MintERC2309QuantityExceedsLimit();

  /**
   * The `extraData` cannot be set on an unintialized ownership slot.
   */
  error OwnershipNotInitializedForExtraData();

  struct TokenOwnership {
    // The address of the owner.
    address addr;
    // Keeps track of the start time of ownership with minimal overhead for tokenomics.
    uint64 startTimestamp;
    // Whether the token has been burned.
    bool burned;
    // Arbitrary data similar to `startTimestamp` that can be set through `_extraData`.
    uint24 extraData;
  }

  /**
   * @dev Returns the total amount of tokens stored by the contract.
   *
   * Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens.
   */
  function totalSupply() external view returns (uint256);

  // ==============================
  //            IERC165
  // ==============================

  /**
   * @dev Returns true if this contract implements the interface defined by
   * `interfaceId`. See the corresponding
   * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
   * to learn more about how these ids are created.
   *
   * This function call must use less than 30 000 gas.
   */
  function supportsInterface(bytes4 interfaceId) external view returns (bool);

  // ==============================
  //            IERC721
  // ==============================

  /**
   * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
   */
  event Transfer(
    address indexed from,
    address indexed to,
    uint256 indexed tokenId
  );

  /**
   * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
   */
  event Approval(
    address indexed owner,
    address indexed approved,
    uint256 indexed tokenId
  );

  /**
   * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
   */
  event ApprovalForAll(
    address indexed owner,
    address indexed operator,
    bool approved
  );

  /**
   * @dev Returns the number of tokens in ``owner``'s account.
   */
  function balanceOf(address owner) external view returns (uint256 balance);

  /**
   * @dev Returns the owner of the `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function ownerOf(uint256 tokenId) external view returns (address owner);

  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must exist and be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId,
    bytes calldata data
  ) external;

  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
   * are aware of the ERC721 protocol to prevent tokens from being forever locked.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must exist and be owned by `from`.
   * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
   * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function safeTransferFrom(address from, address to, uint256 tokenId) external;

  /**
   * @dev Transfers `tokenId` token from `from` to `to`.
   *
   * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(address from, address to, uint256 tokenId) external;

  /**
   * @dev Gives permission to `to` to transfer `tokenId` token to another account.
   * The approval is cleared when the token is transferred.
   *
   * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
   *
   * Requirements:
   *
   * - The caller must own the token or be an approved operator.
   * - `tokenId` must exist.
   *
   * Emits an {Approval} event.
   */
  function approve(address to, uint256 tokenId) external;

  /**
   * @dev Approve or remove `operator` as an operator for the caller.
   * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
   *
   * Requirements:
   *
   * - The `operator` cannot be the caller.
   *
   * Emits an {ApprovalForAll} event.
   */
  function setApprovalForAll(address operator, bool _approved) external;

  /**
   * @dev Returns the account approved for `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function getApproved(
    uint256 tokenId
  ) external view returns (address operator);

  /**
   * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
   *
   * See {setApprovalForAll}
   */
  function isApprovedForAll(
    address owner,
    address operator
  ) external view returns (bool);

  // ==============================
  //        IERC721Metadata
  // ==============================

  /**
   * @dev Returns the token collection name.
   */
  function name() external view returns (string memory);

  /**
   * @dev Returns the token collection symbol.
   */
  function symbol() external view returns (string memory);

  /**
   * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
   */
  function tokenURI(uint256 tokenId) external view returns (string memory);

  // ==============================
  //            IERC2309
  // ==============================

  /**
   * @dev Emitted when tokens in `fromTokenId` to `toTokenId` (inclusive) is transferred from `from` to `to`,
   * as defined in the ERC2309 standard. See `_mintERC2309` for more details.
   */
  event ConsecutiveTransfer(
    uint256 indexed fromTokenId,
    uint256 toTokenId,
    address indexed from,
    address indexed to
  );
}

File 5 of 9 : IManager.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.4;

interface IManager {
  function isAdmin(address _addr) external view returns (bool);

  function isManager(address _addr, uint256 _type) external view returns (bool);

  function addManager(address _addr, uint256 _type) external;

  function removeManager(address _addr, uint256 _type) external;

  function addAdmin(address _addr) external;

  function removeAdmin(address _addr) external;
}

File 6 of 9 : ManagerModifier.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.4;

import "../Manager/IManager.sol";

abstract contract ManagerModifier {
  //=======================================
  // Immutables
  //=======================================
  IManager public immutable MANAGER;

  //=======================================
  // Constructor
  //=======================================
  constructor(address _manager) {
    MANAGER = IManager(_manager);
  }

  //=======================================
  // Modifiers
  //=======================================
  modifier onlyAdmin() {
    require(MANAGER.isAdmin(msg.sender), "Manager: Not an Admin");
    _;
  }

  modifier onlyManager() {
    require(MANAGER.isManager(msg.sender, 0), "Manager: Not manager");
    _;
  }

  modifier onlyMinter() {
    require(MANAGER.isManager(msg.sender, 1), "Manager: Not minter");
    _;
  }

  modifier onlyTokenMinter() {
    require(MANAGER.isManager(msg.sender, 2), "Manager: Not token minter");
    _;
  }

  modifier onlyBinder() {
    require(MANAGER.isManager(msg.sender, 3), "Manager: Not binder");
    _;
  }
}

File 7 of 9 : IMarauder.sol
// SPDX-License-Identifier: Unlicensed

pragma solidity ^0.8.17;

interface IMarauder {
  function burn(uint256 _tokenId) external;

  function mintFor(address _for, uint256 _quantity) external returns (uint256);
}

File 8 of 9 : IMarauderMetadata.sol
// SPDX-License-Identifier: Unlicensed

pragma solidity ^0.8.17;

interface IMarauderMetadata {
  function uri(address _addr, uint256 _tokenId) external view returns (string memory);
}

File 9 of 9 : Marauder.sol
// SPDX-License-Identifier: Unlicensed

pragma solidity ^0.8.17;

import "@openzeppelin/contracts/security/ReentrancyGuard.sol";

import "../lib/ERC721A.sol";

import "../Manager/ManagerModifier.sol";
import "../Bound/IERC721Bound.sol";
import "./IMarauderMetadata.sol";
import "./IMarauder.sol";

contract Marauder is IMarauder, ERC721A, ReentrancyGuard, ManagerModifier {
  //=======================================
  // Immutables
  //=======================================
  IERC721Bound public immutable BOUND;

  //=======================================
  // Metadata
  //=======================================
  IMarauderMetadata public metadata;

  //=======================================
  // Constructor
  //=======================================
  constructor(
    address _manager,
    address _bound,
    address _metadata
  ) ERC721A("Marauder", "MRDR") ManagerModifier(_manager) {
    BOUND = IERC721Bound(_bound);
    metadata = IMarauderMetadata(_metadata);
  }

  //=======================================
  // External
  //=======================================
  function burn(uint256 _tokenId) external nonReentrant {
    _burn(_tokenId, true);
  }

  function mintFor(address _for, uint256 _quantity) external override onlyMinter returns (uint256) {
    // Mint
    return _safeMint(_for, _quantity);
  }

  function tokenURI(uint256 _tokenId) public view override returns (string memory) {
    return metadata.uri(address(this), _tokenId);
  }

  //=======================================
  // Admin
  //=======================================
  function updateMetadata(address _addr) external onlyAdmin {
    metadata = IMarauderMetadata(_addr);
  }

  //=======================================
  // Internal
  //=======================================
  function _beforeTokenTransfers(
    address from,
    address to,
    uint256 startTokenId,
    uint256 quantity
  ) internal override {
    super._beforeTokenTransfers(from, to, startTokenId, quantity);

    // Check if sender is manager
    if (MANAGER.isManager(msg.sender, 0)) {
      return;
    }
    // Check if minting or burning
    if (from == address(0) || to == address(0)) {
      return;
    }

    // Check if unbound
    require(BOUND.isUnbound(address(this), startTokenId), "MDR: Token not unbound");
  }
}

Settings
{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

Contract Security Audit

Contract ABI

[{"inputs":[{"internalType":"address","name":"_manager","type":"address"},{"internalType":"address","name":"_bound","type":"address"},{"internalType":"address","name":"_metadata","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"ApprovalCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"ApprovalQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"ApproveToCaller","type":"error"},{"inputs":[],"name":"BalanceQueryForZeroAddress","type":"error"},{"inputs":[],"name":"MintERC2309QuantityExceedsLimit","type":"error"},{"inputs":[],"name":"MintToZeroAddress","type":"error"},{"inputs":[],"name":"MintZeroQuantity","type":"error"},{"inputs":[],"name":"OwnerQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"OwnershipNotInitializedForExtraData","type":"error"},{"inputs":[],"name":"TransferCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"TransferFromIncorrectOwner","type":"error"},{"inputs":[],"name":"TransferToNonERC721ReceiverImplementer","type":"error"},{"inputs":[],"name":"TransferToZeroAddress","type":"error"},{"inputs":[],"name":"URIQueryForNonexistentToken","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"fromTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"toTokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"ConsecutiveTransfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"BOUND","outputs":[{"internalType":"contract IERC721Bound","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MANAGER","outputs":[{"internalType":"contract IManager","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"metadata","outputs":[{"internalType":"contract IMarauderMetadata","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_for","type":"address"},{"internalType":"uint256","name":"_quantity","type":"uint256"}],"name":"mintFor","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_addr","type":"address"}],"name":"updateMetadata","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

Deployed Bytecode

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

0000000000000000000000004e572433a3bfa336b6396d13afc9f69b582528610000000000000000000000006d3a3d2a9fbc4c7e5d4437250bb5fb8a896ec8c30000000000000000000000000000000000000000000000000000000000000000

-----Decoded View---------------
Arg [0] : _manager (address): 0x4E572433A3Bfa336b6396D13AfC9F69b58252861
Arg [1] : _bound (address): 0x6d3a3d2A9fbC4c7e5D4437250bb5FB8a896ec8c3
Arg [2] : _metadata (address): 0x0000000000000000000000000000000000000000

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 0000000000000000000000004e572433a3bfa336b6396d13afc9f69b58252861
Arg [1] : 0000000000000000000000006d3a3d2a9fbc4c7e5d4437250bb5fb8a896ec8c3
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000000


Loading