Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./L2ArbitrumGateway.sol";
import "../../libraries/gateway/ICustomGateway.sol";

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";

contract L2CustomGateway is L2ArbitrumGateway, ICustomGateway {
    // stores addresses of L2 tokens to be used
    mapping(address => address) public override l1ToL2Token;

    function initialize(address _l1Counterpart, address _router) public {
        L2ArbitrumGateway._initialize(_l1Counterpart, _router);
    }

    /**
     * @notice internal utility function used to handle when no contract is deployed at expected address
     */
    function handleNoContract(
        address _l1Token,
        address, /* expectedL2Address */
        address _from,
        address, /* _to */
        uint256 _amount,
        bytes memory /* gatewayData */
    ) internal override returns (bool shouldHalt) {
        // it is assumed that the custom token is deployed in the L2 before deposits are made
        // trigger withdrawal
        // we don't need the return value from triggerWithdrawal since this is forcing a withdrawal back to the L1
        // instead of composing with a L2 dapp
        triggerWithdrawal(_l1Token, address(this), _from, _amount, "");
        return true;
    }

    function outboundEscrowTransfer(
        address _l2Token,
        address _from,
        uint256 _amount
    ) internal override returns (uint256 amountBurnt) {
        uint256 prevBalance = IERC20(_l2Token).balanceOf(_from);

        // in the custom gateway, we do the same behaviour as the superclass, but actually check
        // for the balances of tokens to ensure that inflationary / deflationary changes in the amount
        // are taken into account
        // we ignore the return value since we actually query the token before and after to calculate
        // the amount of tokens that were burnt
        super.outboundEscrowTransfer(_l2Token, _from, _amount);

        uint256 postBalance = IERC20(_l2Token).balanceOf(_from);
        return SafeMath.sub(prevBalance, postBalance);
    }

    /**
     * @notice Calculate the address used when bridging an ERC20 token
     * @dev the L1 and L2 address oracles may not always be in sync.
     * For example, a custom token may have been registered but not deploy or the contract self destructed.
     * @param l1ERC20 address of L1 token
     * @return L2 address of a bridged ERC20 token
     */
    function calculateL2TokenAddress(address l1ERC20) public view override returns (address) {
        return l1ToL2Token[l1ERC20];
    }

    function registerTokenFromL1(address[] calldata l1Address, address[] calldata l2Address)
        external
        onlyCounterpartGateway
    {
        // we assume both arrays are the same length, safe since its encoded by the L1
        for (uint256 i = 0; i < l1Address.length; i++) {
            // here we don't check if l2Address is a contract and instead deal with that behaviour
            // in `handleNoContract` this way we keep the l1 and l2 address oracles in sync
            l1ToL2Token[l1Address[i]] = l2Address[i];
            emit TokenSet(l1Address[i], l2Address[i]);
        }
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "@openzeppelin/contracts/utils/Address.sol";
import "arb-bridge-eth/contracts/libraries/BytesLib.sol";
import "arb-bridge-eth/contracts/libraries/ProxyUtil.sol";
import "arb-bridge-eth/contracts/libraries/AddressAliasHelper.sol";

import "../IArbToken.sol";

import "../L2ArbitrumMessenger.sol";
import "../../libraries/gateway/GatewayMessageHandler.sol";
import "../../libraries/gateway/TokenGateway.sol";

/**
 * @title Common interface for gatways on Arbitrum messaging to L1.
 */
abstract contract L2ArbitrumGateway is L2ArbitrumMessenger, TokenGateway {
    using Address for address;

    uint256 public exitNum;

    event DepositFinalized(
        address indexed l1Token,
        address indexed _from,
        address indexed _to,
        uint256 _amount
    );

    event WithdrawalInitiated(
        address l1Token,
        address indexed _from,
        address indexed _to,
        uint256 indexed _l2ToL1Id,
        uint256 _exitNum,
        uint256 _amount
    );

    modifier onlyCounterpartGateway() override {
        require(
            msg.sender == counterpartGateway ||
                AddressAliasHelper.undoL1ToL2Alias(msg.sender) == counterpartGateway,
            "ONLY_COUNTERPART_GATEWAY"
        );
        _;
    }

    function postUpgradeInit() external {
        // it is assumed the L2 Arbitrum Gateway contract is behind a Proxy controlled by a proxy admin
        // this function can only be called by the proxy admin contract
        address proxyAdmin = ProxyUtil.getProxyAdmin();
        require(msg.sender == proxyAdmin, "NOT_FROM_ADMIN");
        // this has no other logic since the current upgrade doesn't require this logic
    }

    function _initialize(address _l1Counterpart, address _router) internal virtual override {
        TokenGateway._initialize(_l1Counterpart, _router);
        // L1 gateway must have a router
        require(_router != address(0), "BAD_ROUTER");
    }

    function createOutboundTx(
        address _from,
        uint256, /* _tokenAmount */
        bytes memory _outboundCalldata
    ) internal virtual returns (uint256) {
        // We make this function virtual since outboundTransfer logic is the same for many gateways
        // but sometimes (ie weth) you construct the outgoing message differently.

        // exitNum incremented after being included in _outboundCalldata
        exitNum++;
        return
            sendTxToL1(
                // default to sending no callvalue to the L1
                0,
                _from,
                counterpartGateway,
                _outboundCalldata
            );
    }

    function getOutboundCalldata(
        address _token,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _data
    ) public view override returns (bytes memory outboundCalldata) {
        outboundCalldata = abi.encodeWithSelector(
            TokenGateway.finalizeInboundTransfer.selector,
            _token,
            _from,
            _to,
            _amount,
            GatewayMessageHandler.encodeFromL2GatewayMsg(exitNum, _data)
        );

        return outboundCalldata;
    }

    function outboundTransfer(
        address _l1Token,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) public payable virtual returns (bytes memory) {
        return outboundTransfer(_l1Token, _to, _amount, 0, 0, _data);
    }

    /**
     * @notice Initiates a token withdrawal from Arbitrum to Ethereum
     * @param _l1Token l1 address of token
     * @param _to destination address
     * @param _amount amount of tokens withdrawn
     * @return res encoded unique identifier for withdrawal
     */
    function outboundTransfer(
        address _l1Token,
        address _to,
        uint256 _amount,
        uint256, /* _maxGas */
        uint256, /* _gasPriceBid */
        bytes calldata _data
    ) public payable virtual override returns (bytes memory res) {
        // This function is set as public and virtual so that subclasses can override
        // it and add custom validation for callers (ie only whitelisted users)

        // the function is marked as payable to conform to the inheritance setup
        // this particular code path shouldn't have a msg.value > 0
        // TODO: remove this invariant for execution markets
        require(msg.value == 0, "NO_VALUE");

        address _from;
        bytes memory _extraData;
        {
            if (isRouter(msg.sender)) {
                (_from, _extraData) = GatewayMessageHandler.parseFromRouterToGateway(_data);
            } else {
                _from = msg.sender;
                _extraData = _data;
            }
        }
        // the inboundEscrowAndCall functionality has been disabled, so no data is allowed
        require(_extraData.length == 0, "EXTRA_DATA_DISABLED");

        uint256 id;
        {
            address l2Token = calculateL2TokenAddress(_l1Token);
            require(l2Token.isContract(), "TOKEN_NOT_DEPLOYED");
            require(IArbToken(l2Token).l1Address() == _l1Token, "NOT_EXPECTED_L1_TOKEN");

            _amount = outboundEscrowTransfer(l2Token, _from, _amount);
            id = triggerWithdrawal(_l1Token, _from, _to, _amount, _extraData);
        }
        return abi.encode(id);
    }

    function triggerWithdrawal(
        address _l1Token,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _data
    ) internal returns (uint256) {
        // exit number used for tradeable exits
        uint256 currExitNum = exitNum;
        // unique id used to identify the L2 to L1 tx
        uint256 id = createOutboundTx(
            _from,
            _amount,
            getOutboundCalldata(_l1Token, _from, _to, _amount, _data)
        );
        emit WithdrawalInitiated(_l1Token, _from, _to, id, currExitNum, _amount);
        return id;
    }

    function outboundEscrowTransfer(
        address _l2Token,
        address _from,
        uint256 _amount
    ) internal virtual returns (uint256 amountBurnt) {
        // this method is virtual since different subclasses can handle escrow differently
        // user funds are escrowed on the gateway using this function
        // burns L2 tokens in order to release escrowed L1 tokens
        IArbToken(_l2Token).bridgeBurn(_from, _amount);
        // by default we assume that the amount we send to bridgeBurn is the amount burnt
        // this might not be the case for every token
        return _amount;
    }

    function inboundEscrowTransfer(
        address _l2Address,
        address _dest,
        uint256 _amount
    ) internal virtual {
        // this method is virtual since different subclasses can handle escrow differently
        IArbToken(_l2Address).bridgeMint(_dest, _amount);
    }

    /**
     * @notice Mint on L2 upon L1 deposit.
     * If token not yet deployed and symbol/name/decimal data is included, deploys StandardArbERC20
     * @dev Callable only by the L1ERC20Gateway.outboundTransfer method. For initial deployments of a token the L1 L1ERC20Gateway
     * is expected to include the deployData. If not a L1 withdrawal is automatically triggered for the user
     * @param _token L1 address of ERC20
     * @param _from account that initiated the deposit in the L1
     * @param _to account to be credited with the tokens in the L2 (can be the user's L2 account or a contract)
     * @param _amount token amount to be minted to the user
     * @param _data encoded symbol/name/decimal data for deploy, in addition to any additional callhook data
     */
    function finalizeInboundTransfer(
        address _token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) external payable override onlyCounterpartGateway {
        (bytes memory gatewayData, bytes memory callHookData) = GatewayMessageHandler
            .parseFromL1GatewayMsg(_data);

        if (callHookData.length != 0) {
            // callHookData should always be 0 since inboundEscrowAndCall is disabled
            callHookData = bytes("");
        }

        address expectedAddress = calculateL2TokenAddress(_token);

        if (!expectedAddress.isContract()) {
            bool shouldHalt = handleNoContract(
                _token,
                expectedAddress,
                _from,
                _to,
                _amount,
                gatewayData
            );
            if (shouldHalt) return;
        }
        // ignores gatewayData if token already deployed

        {
            // validate if L1 address supplied matches that of the expected L2 address
            (bool success, bytes memory _l1AddressData) = expectedAddress.staticcall(
                abi.encodeWithSelector(IArbToken.l1Address.selector)
            );

            bool shouldWithdraw;
            if (!success || _l1AddressData.length < 32) {
                shouldWithdraw = true;
            } else {
                // we do this in the else branch since we want to avoid reverts
                // and `toAddress` reverts if _l1AddressData has a short length
                // `_l1AddressData` should be 12 bytes of padding then 20 bytes for the address
                address expectedL1Address = BytesLib.toAddress(_l1AddressData, 12);
                if (expectedL1Address != _token) {
                    shouldWithdraw = true;
                }
            }

            if (shouldWithdraw) {
                // we don't need the return value from triggerWithdrawal since this is forcing
                // a withdrawal back to the L1 instead of composing with a L2 dapp
                triggerWithdrawal(_token, address(this), _from, _amount, "");
                return;
            }
        }

        inboundEscrowTransfer(expectedAddress, _to, _amount);
        emit DepositFinalized(_token, _from, _to, _amount);

        return;
    }

    // returns if function should halt after
    function handleNoContract(
        address _l1Token,
        address expectedL2Address,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory gatewayData
    ) internal virtual returns (bool shouldHalt);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

// import "./ITokenGateway.sol";

interface ICustomGateway {
    function l1ToL2Token(address _l1Token) external view returns (address _l2Token);

    event TokenSet(address indexed l1Address, address indexed l2Address);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */

pragma solidity ^0.6.11;

/* solhint-disable no-inline-assembly */
library BytesLib {
    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= (_start + 20), "Read out of bounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= (_start + 1), "Read out of bounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= (_start + 32), "Read out of bounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= (_start + 32), "Read out of bounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }
}
/* solhint-enable no-inline-assembly */

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

library ProxyUtil {
    function getProxyAdmin() internal view returns (address admin) {
        // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.4.0/contracts/proxy/TransparentUpgradeableProxy.sol#L48
        // Storage slot with the admin of the proxy contract.
        // This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
        bytes32 slot = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
        assembly {
            admin := sload(slot)
        }
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

library AddressAliasHelper {
    uint160 constant offset = uint160(0x1111000000000000000000000000000000001111);

    /// @notice Utility function that converts the msg.sender viewed in the L2 to the
    /// address in the L1 that submitted a tx to the inbox
    /// @param l1Address L2 address as viewed in msg.sender
    /// @return l2Address the address in the L1 that triggered the tx to L2
    function applyL1ToL2Alias(address l1Address) internal pure returns (address l2Address) {
        l2Address = address(uint160(l1Address) + offset);
    }

    /// @notice Utility function that converts the msg.sender viewed in the L2 to the
    /// address in the L1 that submitted a tx to the inbox
    /// @param l2Address L2 address as viewed in msg.sender
    /// @return l1Address the address in the L1 that triggered the tx to L2
    function undoL1ToL2Alias(address l2Address) internal pure returns (address l1Address) {
        l1Address = address(uint160(l2Address) - offset);
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @title Minimum expected interface for L2 token that interacts with the L2 token bridge (this is the interface necessary
 * for a custom token that interacts with the bridge, see TestArbCustomToken.sol for an example implementation).
 */
pragma solidity ^0.6.11;

interface IArbToken {
    /**
     * @notice should increase token supply by amount, and should (probably) only be callable by the L1 bridge.
     */
    function bridgeMint(address account, uint256 amount) external;

    /**
     * @notice should decrease token supply by amount, and should (probably) only be callable by the L1 bridge.
     */
    function bridgeBurn(address account, uint256 amount) external;

    /**
     * @return address of layer 1 token
     */
    function l1Address() external view returns (address);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "arbos-contracts/arbos/builtin/ArbSys.sol";

/// @notice L2 utility contract to assist with L1 <=> L2 interactions
/// @dev this is an abstract contract instead of library so the functions can be easily overriden when testing
abstract contract L2ArbitrumMessenger {
    address internal constant ARB_SYS_ADDRESS = address(100);

    event TxToL1(address indexed _from, address indexed _to, uint256 indexed _id, bytes _data);

    function sendTxToL1(
        uint256 _l1CallValue,
        address _from,
        address _to,
        bytes memory _data
    ) internal virtual returns (uint256) {
        uint256 _id = ArbSys(ARB_SYS_ADDRESS).sendTxToL1{ value: _l1CallValue }(_to, _data);
        emit TxToL1(_from, _to, _id, _data);
        return _id;
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

/// @notice this library manages encoding and decoding of gateway communication
library GatewayMessageHandler {
    // these are for communication from L1 to L2 gateway

    function encodeToL2GatewayMsg(bytes memory gatewayData, bytes memory callHookData)
        internal
        pure
        returns (bytes memory res)
    {
        res = abi.encode(gatewayData, callHookData);
    }

    function parseFromL1GatewayMsg(bytes calldata _data)
        internal
        pure
        returns (bytes memory gatewayData, bytes memory callHookData)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        (gatewayData, callHookData) = abi.decode(_data, (bytes, bytes));
    }

    // these are for communication from L2 to L1 gateway

    function encodeFromL2GatewayMsg(uint256 exitNum, bytes memory callHookData)
        internal
        pure
        returns (bytes memory res)
    {
        res = abi.encode(exitNum, callHookData);
    }

    function parseToL1GatewayMsg(bytes calldata _data)
        internal
        pure
        returns (uint256 exitNum, bytes memory callHookData)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        (exitNum, callHookData) = abi.decode(_data, (uint256, bytes));
    }

    // these are for communication from router to gateway

    function encodeFromRouterToGateway(address _from, bytes calldata _data)
        internal
        pure
        returns (bytes memory res)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        return abi.encode(_from, _data);
    }

    function parseFromRouterToGateway(bytes calldata _data)
        internal
        pure
        returns (address, bytes memory res)
    {
        // abi decode may revert, but the encoding is done by L1 gateway, so we trust it
        return abi.decode(_data, (address, bytes));
    }
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

import "./ITokenGateway.sol";
import "@openzeppelin/contracts/utils/Address.sol";

abstract contract TokenGateway is ITokenGateway {
    using Address for address;

    address public counterpartGateway;
    address public router;

    modifier onlyCounterpartGateway() virtual {
        // this method is overriden in gateways that require special logic for validation
        // ie L2 to L1 messages need to be validated against the outbox
        require(msg.sender == counterpartGateway, "ONLY_COUNTERPART_GATEWAY");
        _;
    }

    function _initialize(address _counterpartGateway, address _router) internal virtual {
        // This initializes internal variables of the abstract contract it can be chained together with other functions.
        // It is virtual so subclasses can override or wrap around this logic.
        // An example where this is useful is different subclasses that validate the router address differently
        require(_counterpartGateway != address(0), "INVALID_COUNTERPART");
        require(counterpartGateway == address(0), "ALREADY_INIT");
        counterpartGateway = _counterpartGateway;
        router = _router;
    }

    function isRouter(address _target) internal view returns (bool isTargetRouter) {
        return _target == router;
    }

    /**
     * @notice Calculate the address used when bridging an ERC20 token
     * @dev the L1 and L2 address oracles may not always be in sync.
     * For example, a custom token may have been registered but not deploy or the contract self destructed.
     * @param l1ERC20 address of L1 token
     * @return L2 address of a bridged ERC20 token
     */
    function calculateL2TokenAddress(address l1ERC20)
        public
        view
        virtual
        override
        returns (address);

    function outboundTransfer(
        address _token,
        address _to,
        uint256 _amount,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes calldata _data
    ) external payable virtual override returns (bytes memory);

    function getOutboundCalldata(
        address _token,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _data
    ) public view virtual returns (bytes memory);

    function finalizeInboundTransfer(
        address _token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) external payable virtual override;
}

pragma solidity >=0.4.21 <0.7.0;

/**
* @title Precompiled contract that exists in every Arbitrum chain at address(100), 0x0000000000000000000000000000000000000064. Exposes a variety of system-level functionality.
 */
interface ArbSys {
    /**
    * @notice Get internal version number identifying an ArbOS build
    * @return version number as int
     */
    function arbOSVersion() external pure returns (uint);

    function arbChainID() external view returns(uint);

    /**
    * @notice Get Arbitrum block number (distinct from L1 block number; Arbitrum genesis block has block number 0)
    * @return block number as int
     */ 
    function arbBlockNumber() external view returns (uint);

    /** 
    * @notice Send given amount of Eth to dest from sender.
    * This is a convenience function, which is equivalent to calling sendTxToL1 with empty calldataForL1.
    * @param destination recipient address on L1
    * @return unique identifier for this L2-to-L1 transaction.
    */
    function withdrawEth(address destination) external payable returns(uint);

    /** 
    * @notice Send a transaction to L1
    * @param destination recipient address on L1 
    * @param calldataForL1 (optional) calldata for L1 contract call
    * @return a unique identifier for this L2-to-L1 transaction.
    */
    function sendTxToL1(address destination, bytes calldata calldataForL1) external payable returns(uint);

    /** 
    * @notice get the number of transactions issued by the given external account or the account sequence number of the given contract
    * @param account target account
    * @return the number of transactions issued by the given external account or the account sequence number of the given contract
    */
    function getTransactionCount(address account) external view returns(uint256);

    /**  
    * @notice get the value of target L2 storage slot 
    * This function is only callable from address 0 to prevent contracts from being able to call it
    * @param account target account
    * @param index target index of storage slot 
    * @return stotage value for the given account at the given index
    */
    function getStorageAt(address account, uint256 index) external view returns (uint256);

    /**
    * @notice check if current call is coming from l1
    * @return true if the caller of this was called directly from L1
    */
    function isTopLevelCall() external view returns (bool);

    event L2ToL1Transaction(address caller, address indexed destination, uint indexed uniqueId,
                            uint indexed batchNumber, uint indexInBatch,
                            uint arbBlockNum, uint ethBlockNum, uint timestamp,
                            uint callvalue, bytes data);
}

// SPDX-License-Identifier: Apache-2.0

/*
 * Copyright 2020, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

pragma solidity ^0.6.11;

interface ITokenGateway {
    /// @notice event deprecated in favor of DepositInitiated and WithdrawalInitiated
    // event OutboundTransferInitiated(
    //     address token,
    //     address indexed _from,
    //     address indexed _to,
    //     uint256 indexed _transferId,
    //     uint256 _amount,
    //     bytes _data
    // );

    /// @notice event deprecated in favor of DepositFinalized and WithdrawalFinalized
    // event InboundTransferFinalized(
    //     address token,
    //     address indexed _from,
    //     address indexed _to,
    //     uint256 indexed _transferId,
    //     uint256 _amount,
    //     bytes _data
    // );

    function outboundTransfer(
        address _token,
        address _to,
        uint256 _amount,
        uint256 _maxGas,
        uint256 _gasPriceBid,
        bytes calldata _data
    ) external payable returns (bytes memory);

    function finalizeInboundTransfer(
        address _token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _data
    ) external payable;

    /**
     * @notice Calculate the address used when bridging an ERC20 token
     * @dev the L1 and L2 address oracles may not always be in sync.
     * For example, a custom token may have been registered but not deploy or the contract self destructed.
     * @param l1ERC20 address of L1 token
     * @return L2 address of a bridged ERC20 token
     */
    function calculateL2TokenAddress(address l1ERC20) external view returns (address);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

{
  "optimizer": {
    "enabled": true,
    "runs": 100
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"l1Token","type":"address"},{"indexed":true,"internalType":"address","name":"_from","type":"address"},{"indexed":true,"internalType":"address","name":"_to","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"DepositFinalized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"l1Address","type":"address"},{"indexed":true,"internalType":"address","name":"l2Address","type":"address"}],"name":"TokenSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_from","type":"address"},{"indexed":true,"internalType":"address","name":"_to","type":"address"},{"indexed":true,"internalType":"uint256","name":"_id","type":"uint256"},{"indexed":false,"internalType":"bytes","name":"_data","type":"bytes"}],"name":"TxToL1","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"l1Token","type":"address"},{"indexed":true,"internalType":"address","name":"_from","type":"address"},{"indexed":true,"internalType":"address","name":"_to","type":"address"},{"indexed":true,"internalType":"uint256","name":"_l2ToL1Id","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_exitNum","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"WithdrawalInitiated","type":"event"},{"inputs":[{"internalType":"address","name":"l1ERC20","type":"address"}],"name":"calculateL2TokenAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"counterpartGateway","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"exitNum","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"address","name":"_from","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"finalizeInboundTransfer","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"address","name":"_from","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"getOutboundCalldata","outputs":[{"internalType":"bytes","name":"outboundCalldata","type":"bytes"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_l1Counterpart","type":"address"},{"internalType":"address","name":"_router","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"l1ToL2Token","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_l1Token","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"outboundTransfer","outputs":[{"internalType":"bytes","name":"","type":"bytes"}],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"_l1Token","type":"address"},{"internalType":"address","name":"_to","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"outboundTransfer","outputs":[{"internalType":"bytes","name":"res","type":"bytes"}],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"postUpgradeInit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"l1Address","type":"address[]"},{"internalType":"address[]","name":"l2Address","type":"address[]"}],"name":"registerTokenFromL1","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"router","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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