Contract Source Code (Solidity)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

/**
 *Submitted for verification at Arbiscan.io on 2021-09-17
*/

pragma solidity ^0.6.12;
// SPDX-License-Identifier: UNLICENSED


/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}


/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}



/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}


/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}


/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}


contract TokenLocker is Ownable, ReentrancyGuard {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;

    mapping (address => uint256) public balances;

    IERC20 public token;
    address public presale;
    uint256 public unlockTime;
    bool public unlocked = false;

    constructor(address _token, address _presale) public {
        token = IERC20(_token);
        presale = _presale;
        unlockTime = now + 180 days;
    }

    function depositFor(address user, uint256 _amount) public nonReentrant {
        require(msg.sender == presale, "not allowed");
        uint256 userAmount = balances[user];
        balances[user] = userAmount.add(_amount);

        token.safeTransferFrom(msg.sender, address(this), _amount);
        emit Deposited(user, _amount);
    }

    function withdrawAll() external {
        withdraw(balances[msg.sender]);
    }

    function withdraw(uint256 _amount) public nonReentrant{
        require(unlockTime < now || unlocked, "Can't withdraw yet");
        require(balances[msg.sender] >= _amount, "Trying to withdraw too much");

        uint256 userAmount = balances[msg.sender];
        balances[msg.sender] = userAmount.sub(_amount);

        token.safeTransfer(msg.sender, _amount);
        emit Withdrawn(msg.sender, _amount);
    }

    /* ========== RESTRICTED FUNCTIONS ========== */

    function setUnlocked(bool _unlocked) public onlyOwner {
        unlocked = _unlocked;
    }

    /* ========== EVENTS ========== */

    event Deposited(address indexed user, uint256 amount);
    event Withdrawn(address indexed user, uint256 amount);
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"address","name":"_presale","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposited","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdrawn","type":"event"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"balances","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"user","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"depositFor","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"presale","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_unlocked","type":"bool"}],"name":"setUnlocked","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"token","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unlockTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"unlocked","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawAll","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

00000000000000000000000009ad12552ec45f82be90b38dfe7b06332a6808640000000000000000000000001219d121dab8b6c81b4a1789fb39e02bf19491bb

-----Decoded View---------------
Arg [0] : _token (address): 0x09ad12552ec45f82bE90B38dFE7b06332A680864
Arg [1] : _presale (address): 0x1219D121DaB8B6c81B4a1789fB39E02bF19491BB

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 00000000000000000000000009ad12552ec45f82be90b38dfe7b06332a680864
Arg [1] : 0000000000000000000000001219d121dab8b6c81b4a1789fb39e02bf19491bb

27467:1657:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28864:93;;;;;;;;;;;;;;;;-1:-1:-1;28864:93:0;;;;:::i;:::-;;27699:25;;;:::i;:::-;;;;;;;;;;;;;;;;27591:44;;;;;;;;;;;;;;;;-1:-1:-1;27591:44:0;-1:-1:-1;;;;;27591:44:0;;:::i;28377:423::-;;;;;;;;;;;;;;;;-1:-1:-1;28377:423:0;;:::i;27937:343::-;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;27937:343:0;;;;;;;;:::i;27731:28::-;;;:::i;:::-;;;;;;;;;;;;;;;;;;24303:148;;;:::i;28288:81::-;;;:::i;23652:87::-;;;:::i;:::-;;;;-1:-1:-1;;;;;23652:87:0;;;;;;;;;;;;;;24606:244;;;;;;;;;;;;;;;;-1:-1:-1;24606:244:0;-1:-1:-1;;;;;24606:244:0;;:::i;27644:19::-;;;:::i;27670:22::-;;;:::i;28864:93::-;23883:12;:10;:12::i;:::-;-1:-1:-1;;;;;23872:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;23872:23:0;;23864:68;;;;;-1:-1:-1;;;23864:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28929:8:::1;:20:::0;;-1:-1:-1;;28929:20:0::1;::::0;::::1;;::::0;;;::::1;::::0;;28864:93::o;27699:25::-;;;;:::o;27591:44::-;;;;;;;;;;;;;:::o;28377:423::-;26510:1;27116:7;;:19;;27108:63;;;;;-1:-1:-1;;;27108:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;26510:1;27249:7;:18;28450:10:::1;::::0;28463:3:::1;-1:-1:-1::0;28450:16:0;:28:::1;;-1:-1:-1::0;28470:8:0::1;::::0;::::1;;28450:28;28442:59;;;::::0;;-1:-1:-1;;;28442:59:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;28442:59:0;;;;;;;;;;;;;::::1;;28529:10;28520:20;::::0;;;:8:::1;:20;::::0;;;;;:31;-1:-1:-1;28520:31:0::1;28512:71;;;::::0;;-1:-1:-1;;;28512:71:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;::::1;::::0;;;;;;;;;;;;;::::1;;28626:10;28596:18;28617:20:::0;;;:8:::1;:20;::::0;;;;;28671:23:::1;28617:20:::0;28686:7;28671:14:::1;:23::i;:::-;28657:10;28648:20;::::0;;;:8:::1;:20;::::0;;;;:46;;;;28707:5:::1;::::0;:39:::1;::::0;-1:-1:-1;;;;;28707:5:0;;::::1;::::0;28738:7;28707:18:::1;:39::i;:::-;28762:30;::::0;;;;;;;28772:10:::1;::::0;28762:30:::1;::::0;;;;;::::1;::::0;;::::1;-1:-1:-1::0;;26466:1:0;27428:22;;28377:423::o;27937:343::-;26510:1;27116:7;;:19;;27108:63;;;;;-1:-1:-1;;;27108:63:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;26510:1;27249:7;:18;28041:7:::1;::::0;-1:-1:-1;;;;;28041:7:0::1;28027:10;:21;28019:45;;;::::0;;-1:-1:-1;;;28019:45:0;;::::1;;::::0;::::1;::::0;::::1;::::0;;;;-1:-1:-1;;;28019:45:0;;;;;;;;;;;;;::::1;;-1:-1:-1::0;;;;;28096:14:0;::::1;28075:18;28096:14:::0;;;:8:::1;:14;::::0;;;;;28138:23:::1;28096:14:::0;28153:7;28138:14:::1;:23::i;:::-;-1:-1:-1::0;;;;;28121:14:0;;::::1;;::::0;;;:8:::1;:14;::::0;;;;:40;;;;28174:5:::1;::::0;:58:::1;::::0;:5:::1;28197:10;28217:4;28224:7:::0;28174:22:::1;:58::i;:::-;28248:24;::::0;;;;;;;-1:-1:-1;;;;;28248:24:0;::::1;::::0;::::1;::::0;;;;;::::1;::::0;;::::1;-1:-1:-1::0;;26466:1:0;27428:22;;-1:-1:-1;27937:343:0:o;27731:28::-;;;;;;:::o;24303:148::-;23883:12;:10;:12::i;:::-;-1:-1:-1;;;;;23872:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;23872:23:0;;23864:68;;;;;-1:-1:-1;;;23864:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;24410:1:::1;24394:6:::0;;24373:40:::1;::::0;-1:-1:-1;;;;;24394:6:0;;::::1;::::0;24373:40:::1;::::0;24410:1;;24373:40:::1;24441:1;24424:19:::0;;-1:-1:-1;;;;;;24424:19:0::1;::::0;;24303:148::o;28288:81::-;28349:10;28340:20;;;;:8;:20;;;;;;28331:30;;:8;:30::i;:::-;28288:81::o;23652:87::-;23698:7;23725:6;-1:-1:-1;;;;;23725:6:0;23652:87;:::o;24606:244::-;23883:12;:10;:12::i;:::-;-1:-1:-1;;;;;23872:23:0;:7;:5;:7::i;:::-;-1:-1:-1;;;;;23872:23:0;;23864:68;;;;;-1:-1:-1;;;23864:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;24695:22:0;::::1;24687:73;;;;-1:-1:-1::0;;;24687:73:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;24797:6;::::0;;24776:38:::1;::::0;-1:-1:-1;;;;;24776:38:0;;::::1;::::0;24797:6;::::1;::::0;24776:38:::1;::::0;::::1;24825:6;:17:::0;;-1:-1:-1;;;;;;24825:17:0::1;-1:-1:-1::0;;;;;24825:17:0;;;::::1;::::0;;;::::1;::::0;;24606:244::o;27644:19::-;;;-1:-1:-1;;;;;27644:19:0;;:::o;27670:22::-;;;-1:-1:-1;;;;;27670:22:0;;:::o;22279:106::-;22367:10;22279:106;:::o;3236:158::-;3294:7;3327:1;3322;:6;;3314:49;;;;;-1:-1:-1;;;3314:49:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;3381:5:0;;;3236:158::o;18661:177::-;18771:58;;;-1:-1:-1;;;;;18771:58:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;18771:58:0;-1:-1:-1;;;18771:58:0;;;18744:86;;18764:5;;18744:19;:86::i;:::-;18661:177;;;:::o;2774:179::-;2832:7;2864:5;;;2888:6;;;;2880:46;;;;;-1:-1:-1;;;2880:46:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;2944:1;2774:179;-1:-1:-1;;;2774:179:0:o;18846:205::-;18974:68;;;-1:-1:-1;;;;;18974:68:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;18974:68:0;-1:-1:-1;;;18974:68:0;;;18947:96;;18967:5;;18947:19;:96::i;:::-;18846:205;;;;:::o;20966:761::-;21390:23;21416:69;21444:4;21416:69;;;;;;;;;;;;;;;;;21424:5;-1:-1:-1;;;;;21416:27:0;;;:69;;;;;:::i;:::-;21500:17;;21390:95;;-1:-1:-1;21500:21:0;21496:224;;21642:10;21631:30;;;;;;;;;;;;;;;-1:-1:-1;21631:30:0;21623:85;;;;-1:-1:-1;;;21623:85:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13757:195;13860:12;13892:52;13914:6;13922:4;13928:1;13931:12;13892:21;:52::i;:::-;13885:59;13757:195;-1:-1:-1;;;;13757:195:0:o;14809:530::-;14936:12;14994:5;14969:21;:30;;14961:81;;;;-1:-1:-1;;;14961:81:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;15061:18;15072:6;15061:10;:18::i;:::-;15053:60;;;;;-1:-1:-1;;;15053:60:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;15187:12;15201:23;15228:6;-1:-1:-1;;;;;15228:11:0;15248:5;15256:4;15228:33;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;15228:33:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;15186:75;;;;15279:52;15297:7;15306:10;15318:12;15279:17;:52::i;:::-;15272:59;14809:530;-1:-1:-1;;;;;;;14809:530:0:o;10839:422::-;11206:20;11245:8;;;10839:422::o;17349:742::-;17464:12;17493:7;17489:595;;;-1:-1:-1;17524:10:0;17517:17;;17489:595;17638:17;;:21;17634:439;;17901:10;17895:17;17962:15;17949:10;17945:2;17941:19;17934:44;17849:148;18044:12;18037:20;;-1:-1:-1;;;18037:20:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

ipfs://5a094cd4b3163804eb54a5252758369e6b9c28739f9e4079bc08504870f2a583