Contract 0xcF70E2F3567ba396F3dd04822F78Ecd70Ba46894

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./SwapUtils.sol";

/**
 * @title AmplificationUtils library
 * @notice A library to calculate and ramp the A parameter of a given `SwapUtils.Swap` struct.
 * This library assumes the struct is fully validated.
 */
library AmplificationUtils {
    using SafeMath for uint256;

    event RampA(
        uint256 oldA,
        uint256 newA,
        uint256 initialTime,
        uint256 futureTime
    );
    event StopRampA(uint256 currentA, uint256 time);

    // Constant values used in ramping A calculations
    uint256 public constant A_PRECISION = 100;
    uint256 public constant MAX_A = 10**6;
    uint256 private constant MAX_A_CHANGE = 2;
    uint256 private constant MIN_RAMP_TIME = 14 days;

    /**
     * @notice Return A, the amplification coefficient * n * (n - 1)
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter
     */
    function getA(SwapUtils.Swap storage self) external view returns (uint256) {
        return _getAPrecise(self).div(A_PRECISION);
    }

    /**
     * @notice Return A in its raw precision
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter in its raw precision form
     */
    function getAPrecise(SwapUtils.Swap storage self)
        external
        view
        returns (uint256)
    {
        return _getAPrecise(self);
    }

    /**
     * @notice Return A in its raw precision
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter in its raw precision form
     */
    function _getAPrecise(SwapUtils.Swap storage self)
        internal
        view
        returns (uint256)
    {
        uint256 t1 = self.futureATime; // time when ramp is finished
        uint256 a1 = self.futureA; // final A value when ramp is finished

        if (block.timestamp < t1) {
            uint256 t0 = self.initialATime; // time when ramp is started
            uint256 a0 = self.initialA; // initial A value when ramp is started
            if (a1 > a0) {
                // a0 + (a1 - a0) * (block.timestamp - t0) / (t1 - t0)
                return
                    a0.add(
                        a1.sub(a0).mul(block.timestamp.sub(t0)).div(t1.sub(t0))
                    );
            } else {
                // a0 - (a0 - a1) * (block.timestamp - t0) / (t1 - t0)
                return
                    a0.sub(
                        a0.sub(a1).mul(block.timestamp.sub(t0)).div(t1.sub(t0))
                    );
            }
        } else {
            return a1;
        }
    }

    /**
     * @notice Start ramping up or down A parameter towards given futureA_ and futureTime_
     * Checks if the change is too rapid, and commits the new A value only when it falls under
     * the limit range.
     * @param self Swap struct to update
     * @param futureA_ the new A to ramp towards
     * @param futureTime_ timestamp when the new A should be reached
     */
    function rampA(
        SwapUtils.Swap storage self,
        uint256 futureA_,
        uint256 futureTime_
    ) external {
        require(
            block.timestamp >= self.initialATime.add(1 days),
            "Wait 1 day before starting ramp"
        );
        require(
            futureTime_ >= block.timestamp.add(MIN_RAMP_TIME),
            "Insufficient ramp time"
        );
        require(
            futureA_ > 0 && futureA_ < MAX_A,
            "futureA_ must be > 0 and < MAX_A"
        );

        uint256 initialAPrecise = _getAPrecise(self);
        uint256 futureAPrecise = futureA_.mul(A_PRECISION);

        if (futureAPrecise < initialAPrecise) {
            require(
                futureAPrecise.mul(MAX_A_CHANGE) >= initialAPrecise,
                "futureA_ is too small"
            );
        } else {
            require(
                futureAPrecise <= initialAPrecise.mul(MAX_A_CHANGE),
                "futureA_ is too large"
            );
        }

        self.initialA = initialAPrecise;
        self.futureA = futureAPrecise;
        self.initialATime = block.timestamp;
        self.futureATime = futureTime_;

        emit RampA(
            initialAPrecise,
            futureAPrecise,
            block.timestamp,
            futureTime_
        );
    }

    /**
     * @notice Stops ramping A immediately. Once this function is called, rampA()
     * cannot be called for another 24 hours
     * @param self Swap struct to update
     */
    function stopRampA(SwapUtils.Swap storage self) external {
        require(self.futureATime > block.timestamp, "Ramp is already stopped");

        uint256 currentA = _getAPrecise(self);
        self.initialA = currentA;
        self.futureA = currentA;
        self.initialATime = block.timestamp;
        self.futureATime = block.timestamp;

        emit StopRampA(currentA, block.timestamp);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./AmplificationUtils.sol";
import "./LPToken.sol";
import "./MathUtils.sol";

/**
 * @title SwapUtils library
 * @notice A library to be used within Swap.sol. Contains functions responsible for custody and AMM functionalities.
 * @dev Contracts relying on this library must initialize SwapUtils.Swap struct then use this library
 * for SwapUtils.Swap struct. Note that this library contains both functions called by users and admins.
 * Admin functions should be protected within contracts using this library.
 */
library SwapUtils {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;
    using MathUtils for uint256;

    /*** EVENTS ***/

    event TokenSwap(
        address indexed buyer,
        uint256 tokensSold,
        uint256 tokensBought,
        uint128 soldId,
        uint128 boughtId
    );
    event AddLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event RemoveLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256 lpTokenSupply
    );
    event RemoveLiquidityOne(
        address indexed provider,
        uint256 lpTokenAmount,
        uint256 lpTokenSupply,
        uint256 boughtId,
        uint256 tokensBought
    );
    event RemoveLiquidityImbalance(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event NewAdminFee(uint256 newAdminFee);
    event NewSwapFee(uint256 newSwapFee);

    struct Swap {
        // variables around the ramp management of A,
        // the amplification coefficient * n * (n - 1)
        // see https://www.curve.fi/stableswap-paper.pdf for details
        uint256 initialA;
        uint256 futureA;
        uint256 initialATime;
        uint256 futureATime;
        // fee calculation
        uint256 swapFee;
        uint256 adminFee;
        LPToken lpToken;
        // contract references for all tokens being pooled
        IERC20[] pooledTokens;
        // multipliers for each pooled token's precision to get to POOL_PRECISION_DECIMALS
        // for example, TBTC has 18 decimals, so the multiplier should be 1. WBTC
        // has 8, so the multiplier should be 10 ** 18 / 10 ** 8 => 10 ** 10
        uint256[] tokenPrecisionMultipliers;
        // the pool balance of each token, in the token's precision
        // the contract's actual token balance might differ
        uint256[] balances;
    }

    // Struct storing variables used in calculations in the
    // calculateWithdrawOneTokenDY function to avoid stack too deep errors
    struct CalculateWithdrawOneTokenDYInfo {
        uint256 d0;
        uint256 d1;
        uint256 newY;
        uint256 feePerToken;
        uint256 preciseA;
    }

    // Struct storing variables used in calculations in the
    // {add,remove}Liquidity functions to avoid stack too deep errors
    struct ManageLiquidityInfo {
        uint256 d0;
        uint256 d1;
        uint256 d2;
        uint256 preciseA;
        LPToken lpToken;
        uint256 totalSupply;
        uint256[] balances;
        uint256[] multipliers;
    }

    // the precision all pools tokens will be converted to
    uint8 public constant POOL_PRECISION_DECIMALS = 18;

    // the denominator used to calculate admin and LP fees. For example, an
    // LP fee might be something like tradeAmount.mul(fee).div(FEE_DENOMINATOR)
    uint256 private constant FEE_DENOMINATOR = 10**10;

    // Max swap fee is 1% or 100bps of each swap
    uint256 public constant MAX_SWAP_FEE = 10**8;

    // Max adminFee is 100% of the swapFee
    // adminFee does not add additional fee on top of swapFee
    // Instead it takes a certain % of the swapFee. Therefore it has no impact on the
    // users but only on the earnings of LPs
    uint256 public constant MAX_ADMIN_FEE = 10**10;

    // Constant value used as max loop limit
    uint256 private constant MAX_LOOP_LIMIT = 256;

    /*** VIEW & PURE FUNCTIONS ***/

    function _getAPrecise(Swap storage self) internal view returns (uint256) {
        return AmplificationUtils._getAPrecise(self);
    }

    /**
     * @notice Calculate the dy, the amount of selected token that user receives and
     * the fee of withdrawing in one token
     * @param tokenAmount the amount to withdraw in the pool's precision
     * @param tokenIndex which token will be withdrawn
     * @param self Swap struct to read from
     * @return the amount of token user will receive
     */
    function calculateWithdrawOneToken(
        Swap storage self,
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256) {
        (uint256 availableTokenAmount, ) = _calculateWithdrawOneToken(
            self,
            tokenAmount,
            tokenIndex,
            self.lpToken.totalSupply()
        );
        return availableTokenAmount;
    }

    function _calculateWithdrawOneToken(
        Swap storage self,
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 totalSupply
    ) internal view returns (uint256, uint256) {
        uint256 dy;
        uint256 newY;
        uint256 currentY;

        (dy, newY, currentY) = calculateWithdrawOneTokenDY(
            self,
            tokenIndex,
            tokenAmount,
            totalSupply
        );

        // dy_0 (without fees)
        // dy, dy_0 - dy

        uint256 dySwapFee = currentY
            .sub(newY)
            .div(self.tokenPrecisionMultipliers[tokenIndex])
            .sub(dy);

        return (dy, dySwapFee);
    }

    /**
     * @notice Calculate the dy of withdrawing in one token
     * @param self Swap struct to read from
     * @param tokenIndex which token will be withdrawn
     * @param tokenAmount the amount to withdraw in the pools precision
     * @return the d and the new y after withdrawing one token
     */
    function calculateWithdrawOneTokenDY(
        Swap storage self,
        uint8 tokenIndex,
        uint256 tokenAmount,
        uint256 totalSupply
    )
        internal
        view
        returns (
            uint256,
            uint256,
            uint256
        )
    {
        // Get the current D, then solve the stableswap invariant
        // y_i for D - tokenAmount
        uint256[] memory xp = _xp(self);

        require(tokenIndex < xp.length, "Token index out of range");

        CalculateWithdrawOneTokenDYInfo
            memory v = CalculateWithdrawOneTokenDYInfo(0, 0, 0, 0, 0);
        v.preciseA = _getAPrecise(self);
        v.d0 = getD(xp, v.preciseA);
        v.d1 = v.d0.sub(tokenAmount.mul(v.d0).div(totalSupply));

        require(tokenAmount <= xp[tokenIndex], "Withdraw exceeds available");

        v.newY = getYD(v.preciseA, tokenIndex, xp, v.d1);

        uint256[] memory xpReduced = new uint256[](xp.length);

        v.feePerToken = _feePerToken(self.swapFee, xp.length);
        for (uint256 i = 0; i < xp.length; i++) {
            uint256 xpi = xp[i];
            // if i == tokenIndex, dxExpected = xp[i] * d1 / d0 - newY
            // else dxExpected = xp[i] - (xp[i] * d1 / d0)
            // xpReduced[i] -= dxExpected * fee / FEE_DENOMINATOR
            xpReduced[i] = xpi.sub(
                (
                    (i == tokenIndex)
                        ? xpi.mul(v.d1).div(v.d0).sub(v.newY)
                        : xpi.sub(xpi.mul(v.d1).div(v.d0))
                ).mul(v.feePerToken).div(FEE_DENOMINATOR)
            );
        }

        uint256 dy = xpReduced[tokenIndex].sub(
            getYD(v.preciseA, tokenIndex, xpReduced, v.d1)
        );
        dy = dy.sub(1).div(self.tokenPrecisionMultipliers[tokenIndex]);

        return (dy, v.newY, xp[tokenIndex]);
    }

    /**
     * @notice Calculate the price of a token in the pool with given
     * precision-adjusted balances and a particular D.
     *
     * @dev This is accomplished via solving the invariant iteratively.
     * See the StableSwap paper and Curve.fi implementation for further details.
     *
     * x_1**2 + x1 * (sum' - (A*n**n - 1) * D / (A * n**n)) = D ** (n + 1) / (n ** (2 * n) * prod' * A)
     * x_1**2 + b*x_1 = c
     * x_1 = (x_1**2 + c) / (2*x_1 + b)
     *
     * @param a the amplification coefficient * n * (n - 1). See the StableSwap paper for details.
     * @param tokenIndex Index of token we are calculating for.
     * @param xp a precision-adjusted set of pool balances. Array should be
     * the same cardinality as the pool.
     * @param d the stableswap invariant
     * @return the price of the token, in the same precision as in xp
     */
    function getYD(
        uint256 a,
        uint8 tokenIndex,
        uint256[] memory xp,
        uint256 d
    ) internal pure returns (uint256) {
        uint256 numTokens = xp.length;
        require(tokenIndex < numTokens, "Token not found");

        uint256 c = d;
        uint256 s;
        uint256 nA = a.mul(numTokens);

        for (uint256 i = 0; i < numTokens; i++) {
            if (i != tokenIndex) {
                s = s.add(xp[i]);
                c = c.mul(d).div(xp[i].mul(numTokens));
                // If we were to protect the division loss we would have to keep the denominator separate
                // and divide at the end. However this leads to overflow with large numTokens or/and D.
                // c = c * D * D * D * ... overflow!
            }
        }
        c = c.mul(d).mul(AmplificationUtils.A_PRECISION).div(nA.mul(numTokens));

        uint256 b = s.add(d.mul(AmplificationUtils.A_PRECISION).div(nA));
        uint256 yPrev;
        uint256 y = d;
        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {
            yPrev = y;
            y = y.mul(y).add(c).div(y.mul(2).add(b).sub(d));
            if (y.within1(yPrev)) {
                return y;
            }
        }
        revert("Approximation did not converge");
    }

    /**
     * @notice Get D, the StableSwap invariant, based on a set of balances and a particular A.
     * @param xp a precision-adjusted set of pool balances. Array should be the same cardinality
     * as the pool.
     * @param a the amplification coefficient * n * (n - 1) in A_PRECISION.
     * See the StableSwap paper for details
     * @return the invariant, at the precision of the pool
     */
    function getD(uint256[] memory xp, uint256 a)
        internal
        pure
        returns (uint256)
    {
        uint256 numTokens = xp.length;
        uint256 s;
        for (uint256 i = 0; i < numTokens; i++) {
            s = s.add(xp[i]);
        }
        if (s == 0) {
            return 0;
        }

        uint256 prevD;
        uint256 d = s;
        uint256 nA = a.mul(numTokens);

        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {
            uint256 dP = d;
            for (uint256 j = 0; j < numTokens; j++) {
                dP = dP.mul(d).div(xp[j].mul(numTokens));
                // If we were to protect the division loss we would have to keep the denominator separate
                // and divide at the end. However this leads to overflow with large numTokens or/and D.
                // dP = dP * D * D * D * ... overflow!
            }
            prevD = d;
            d = nA
                .mul(s)
                .div(AmplificationUtils.A_PRECISION)
                .add(dP.mul(numTokens))
                .mul(d)
                .div(
                    nA
                        .sub(AmplificationUtils.A_PRECISION)
                        .mul(d)
                        .div(AmplificationUtils.A_PRECISION)
                        .add(numTokens.add(1).mul(dP))
                );
            if (d.within1(prevD)) {
                return d;
            }
        }

        // Convergence should occur in 4 loops or less. If this is reached, there may be something wrong
        // with the pool. If this were to occur repeatedly, LPs should withdraw via `removeLiquidity()`
        // function which does not rely on D.
        revert("D does not converge");
    }

    /**
     * @notice Given a set of balances and precision multipliers, return the
     * precision-adjusted balances.
     *
     * @param balances an array of token balances, in their native precisions.
     * These should generally correspond with pooled tokens.
     *
     * @param precisionMultipliers an array of multipliers, corresponding to
     * the amounts in the balances array. When multiplied together they
     * should yield amounts at the pool's precision.
     *
     * @return an array of amounts "scaled" to the pool's precision
     */
    function _xp(
        uint256[] memory balances,
        uint256[] memory precisionMultipliers
    ) internal pure returns (uint256[] memory) {
        uint256 numTokens = balances.length;
        require(
            numTokens == precisionMultipliers.length,
            "Balances must match multipliers"
        );
        uint256[] memory xp = new uint256[](numTokens);
        for (uint256 i = 0; i < numTokens; i++) {
            xp[i] = balances[i].mul(precisionMultipliers[i]);
        }
        return xp;
    }

    /**
     * @notice Return the precision-adjusted balances of all tokens in the pool
     * @param self Swap struct to read from
     * @return the pool balances "scaled" to the pool's precision, allowing
     * them to be more easily compared.
     */
    function _xp(Swap storage self) internal view returns (uint256[] memory) {
        return _xp(self.balances, self.tokenPrecisionMultipliers);
    }

    /**
     * @notice Get the virtual price, to help calculate profit
     * @param self Swap struct to read from
     * @return the virtual price, scaled to precision of POOL_PRECISION_DECIMALS
     */
    function getVirtualPrice(Swap storage self)
        external
        view
        returns (uint256)
    {
        uint256 d = getD(_xp(self), _getAPrecise(self));
        LPToken lpToken = self.lpToken;
        uint256 supply = lpToken.totalSupply();
        if (supply > 0) {
            return d.mul(10**uint256(POOL_PRECISION_DECIMALS)).div(supply);
        }
        return 0;
    }

    /**
     * @notice Calculate the new balances of the tokens given the indexes of the token
     * that is swapped from (FROM) and the token that is swapped to (TO).
     * This function is used as a helper function to calculate how much TO token
     * the user should receive on swap.
     *
     * @param preciseA precise form of amplification coefficient
     * @param tokenIndexFrom index of FROM token
     * @param tokenIndexTo index of TO token
     * @param x the new total amount of FROM token
     * @param xp balances of the tokens in the pool
     * @return the amount of TO token that should remain in the pool
     */
    function getY(
        uint256 preciseA,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 x,
        uint256[] memory xp
    ) internal pure returns (uint256) {
        uint256 numTokens = xp.length;
        require(
            tokenIndexFrom != tokenIndexTo,
            "Can't compare token to itself"
        );
        require(
            tokenIndexFrom < numTokens && tokenIndexTo < numTokens,
            "Tokens must be in pool"
        );

        uint256 d = getD(xp, preciseA);
        uint256 c = d;
        uint256 s;
        uint256 nA = numTokens.mul(preciseA);

        uint256 _x;
        for (uint256 i = 0; i < numTokens; i++) {
            if (i == tokenIndexFrom) {
                _x = x;
            } else if (i != tokenIndexTo) {
                _x = xp[i];
            } else {
                continue;
            }
            s = s.add(_x);
            c = c.mul(d).div(_x.mul(numTokens));
            // If we were to protect the division loss we would have to keep the denominator separate
            // and divide at the end. However this leads to overflow with large numTokens or/and D.
            // c = c * D * D * D * ... overflow!
        }
        c = c.mul(d).mul(AmplificationUtils.A_PRECISION).div(nA.mul(numTokens));
        uint256 b = s.add(d.mul(AmplificationUtils.A_PRECISION).div(nA));
        uint256 yPrev;
        uint256 y = d;

        // iterative approximation
        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {
            yPrev = y;
            y = y.mul(y).add(c).div(y.mul(2).add(b).sub(d));
            if (y.within1(yPrev)) {
                return y;
            }
        }
        revert("Approximation did not converge");
    }

    /**
     * @notice Externally calculates a swap between two tokens.
     * @param self Swap struct to read from
     * @param tokenIndexFrom the token to sell
     * @param tokenIndexTo the token to buy
     * @param dx the number of tokens to sell. If the token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @return dy the number of tokens the user will get
     */
    function calculateSwap(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256 dy) {
        (dy, ) = _calculateSwap(
            self,
            tokenIndexFrom,
            tokenIndexTo,
            dx,
            self.balances
        );
    }

    /**
     * @notice Internally calculates a swap between two tokens.
     *
     * @dev The caller is expected to transfer the actual amounts (dx and dy)
     * using the token contracts.
     *
     * @param self Swap struct to read from
     * @param tokenIndexFrom the token to sell
     * @param tokenIndexTo the token to buy
     * @param dx the number of tokens to sell. If the token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @return dy the number of tokens the user will get
     * @return dyFee the associated fee
     */
    function _calculateSwap(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256[] memory balances
    ) internal view returns (uint256 dy, uint256 dyFee) {
        uint256[] memory multipliers = self.tokenPrecisionMultipliers;
        uint256[] memory xp = _xp(balances, multipliers);
        require(
            tokenIndexFrom < xp.length && tokenIndexTo < xp.length,
            "Token index out of range"
        );
        uint256 x = dx.mul(multipliers[tokenIndexFrom]).add(xp[tokenIndexFrom]);
        uint256 y = getY(
            _getAPrecise(self),
            tokenIndexFrom,
            tokenIndexTo,
            x,
            xp
        );
        dy = xp[tokenIndexTo].sub(y).sub(1);
        dyFee = dy.mul(self.swapFee).div(FEE_DENOMINATOR);
        dy = dy.sub(dyFee).div(multipliers[tokenIndexTo]);
    }

    /**
     * @notice A simple method to calculate amount of each underlying
     * tokens that is returned upon burning given amount of
     * LP tokens
     *
     * @param amount the amount of LP tokens that would to be burned on
     * withdrawal
     * @return array of amounts of tokens user will receive
     */
    function calculateRemoveLiquidity(Swap storage self, uint256 amount)
        external
        view
        returns (uint256[] memory)
    {
        return
            _calculateRemoveLiquidity(
                self.balances,
                amount,
                self.lpToken.totalSupply()
            );
    }

    function _calculateRemoveLiquidity(
        uint256[] memory balances,
        uint256 amount,
        uint256 totalSupply
    ) internal pure returns (uint256[] memory) {
        require(amount <= totalSupply, "Cannot exceed total supply");

        uint256[] memory amounts = new uint256[](balances.length);

        for (uint256 i = 0; i < balances.length; i++) {
            amounts[i] = balances[i].mul(amount).div(totalSupply);
        }
        return amounts;
    }

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param self Swap struct to read from
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return if deposit was true, total amount of lp token that will be minted and if
     * deposit was false, total amount of lp token that will be burned
     */
    function calculateTokenAmount(
        Swap storage self,
        uint256[] calldata amounts,
        bool deposit
    ) external view returns (uint256) {
        uint256 a = _getAPrecise(self);
        uint256[] memory balances = self.balances;
        uint256[] memory multipliers = self.tokenPrecisionMultipliers;

        uint256 d0 = getD(_xp(balances, multipliers), a);
        for (uint256 i = 0; i < balances.length; i++) {
            if (deposit) {
                balances[i] = balances[i].add(amounts[i]);
            } else {
                balances[i] = balances[i].sub(
                    amounts[i],
                    "Cannot withdraw more than available"
                );
            }
        }
        uint256 d1 = getD(_xp(balances, multipliers), a);
        uint256 totalSupply = self.lpToken.totalSupply();

        if (deposit) {
            return d1.sub(d0).mul(totalSupply).div(d0);
        } else {
            return d0.sub(d1).mul(totalSupply).div(d0);
        }
    }

    /**
     * @notice return accumulated amount of admin fees of the token with given index
     * @param self Swap struct to read from
     * @param index Index of the pooled token
     * @return admin balance in the token's precision
     */
    function getAdminBalance(Swap storage self, uint256 index)
        external
        view
        returns (uint256)
    {
        require(index < self.pooledTokens.length, "Token index out of range");
        return
            self.pooledTokens[index].balanceOf(address(this)).sub(
                self.balances[index]
            );
    }

    /**
     * @notice internal helper function to calculate fee per token multiplier used in
     * swap fee calculations
     * @param swapFee swap fee for the tokens
     * @param numTokens number of tokens pooled
     */
    function _feePerToken(uint256 swapFee, uint256 numTokens)
        internal
        pure
        returns (uint256)
    {
        return swapFee.mul(numTokens).div(numTokens.sub(1).mul(4));
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice swap two tokens in the pool
     * @param self Swap struct to read from and write to
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell
     * @param minDy the min amount the user would like to receive, or revert.
     * @return amount of token user received on swap
     */
    function swap(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy
    ) external returns (uint256) {
        {
            IERC20 tokenFrom = self.pooledTokens[tokenIndexFrom];
            require(
                dx <= tokenFrom.balanceOf(msg.sender),
                "Cannot swap more than you own"
            );
            // Transfer tokens first to see if a fee was charged on transfer
            uint256 beforeBalance = tokenFrom.balanceOf(address(this));
            tokenFrom.safeTransferFrom(msg.sender, address(this), dx);

            // Use the actual transferred amount for AMM math
            dx = tokenFrom.balanceOf(address(this)).sub(beforeBalance);
        }

        uint256 dy;
        uint256 dyFee;
        uint256[] memory balances = self.balances;
        (dy, dyFee) = _calculateSwap(
            self,
            tokenIndexFrom,
            tokenIndexTo,
            dx,
            balances
        );
        require(dy >= minDy, "Swap didn't result in min tokens");

        uint256 dyAdminFee = dyFee.mul(self.adminFee).div(FEE_DENOMINATOR).div(
            self.tokenPrecisionMultipliers[tokenIndexTo]
        );

        self.balances[tokenIndexFrom] = balances[tokenIndexFrom].add(dx);
        self.balances[tokenIndexTo] = balances[tokenIndexTo].sub(dy).sub(
            dyAdminFee
        );

        self.pooledTokens[tokenIndexTo].safeTransfer(msg.sender, dy);

        emit TokenSwap(msg.sender, dx, dy, tokenIndexFrom, tokenIndexTo);

        return dy;
    }

    /**
     * @notice Add liquidity to the pool
     * @param self Swap struct to read from and write to
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * allowed addresses. If the pool is not in the guarded launch phase, this parameter will be ignored.
     * @return amount of LP token user received
     */
    function addLiquidity(
        Swap storage self,
        uint256[] memory amounts,
        uint256 minToMint
    ) external returns (uint256) {
        IERC20[] memory pooledTokens = self.pooledTokens;
        require(
            amounts.length == pooledTokens.length,
            "Amounts must match pooled tokens"
        );

        // current state
        ManageLiquidityInfo memory v = ManageLiquidityInfo(
            0,
            0,
            0,
            _getAPrecise(self),
            self.lpToken,
            0,
            self.balances,
            self.tokenPrecisionMultipliers
        );
        v.totalSupply = v.lpToken.totalSupply();

        if (v.totalSupply != 0) {
            v.d0 = getD(_xp(v.balances, v.multipliers), v.preciseA);
        }

        uint256[] memory newBalances = new uint256[](pooledTokens.length);

        for (uint256 i = 0; i < pooledTokens.length; i++) {
            require(
                v.totalSupply != 0 || amounts[i] > 0,
                "Must supply all tokens in pool"
            );

            // Transfer tokens first to see if a fee was charged on transfer
            if (amounts[i] != 0) {
                uint256 beforeBalance = pooledTokens[i].balanceOf(
                    address(this)
                );
                pooledTokens[i].safeTransferFrom(
                    msg.sender,
                    address(this),
                    amounts[i]
                );

                // Update the amounts[] with actual transfer amount
                amounts[i] = pooledTokens[i].balanceOf(address(this)).sub(
                    beforeBalance
                );
            }

            newBalances[i] = v.balances[i].add(amounts[i]);
        }

        // invariant after change
        v.d1 = getD(_xp(newBalances, v.multipliers), v.preciseA);
        require(v.d1 > v.d0, "D should increase");

        // updated to reflect fees and calculate the user's LP tokens
        v.d2 = v.d1;
        uint256[] memory fees = new uint256[](pooledTokens.length);

        if (v.totalSupply != 0) {
            uint256 feePerToken = _feePerToken(
                self.swapFee,
                pooledTokens.length
            );
            for (uint256 i = 0; i < pooledTokens.length; i++) {
                uint256 idealBalance = v.d1.mul(v.balances[i]).div(v.d0);
                fees[i] = feePerToken
                    .mul(idealBalance.difference(newBalances[i]))
                    .div(FEE_DENOMINATOR);
                self.balances[i] = newBalances[i].sub(
                    fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)
                );
                newBalances[i] = newBalances[i].sub(fees[i]);
            }
            v.d2 = getD(_xp(newBalances, v.multipliers), v.preciseA);
        } else {
            // the initial depositor doesn't pay fees
            self.balances = newBalances;
        }

        uint256 toMint;
        if (v.totalSupply == 0) {
            toMint = v.d1;
        } else {
            toMint = v.d2.sub(v.d0).mul(v.totalSupply).div(v.d0);
        }

        require(toMint >= minToMint, "Couldn't mint min requested");

        // mint the user's LP tokens
        v.lpToken.mint(msg.sender, toMint);

        emit AddLiquidity(
            msg.sender,
            amounts,
            fees,
            v.d1,
            v.totalSupply.add(toMint)
        );

        return toMint;
    }

    /**
     * @notice Burn LP tokens to remove liquidity from the pool.
     * @dev Liquidity can always be removed, even when the pool is paused.
     * @param self Swap struct to read from and write to
     * @param amount the amount of LP tokens to burn
     * @param minAmounts the minimum amounts of each token in the pool
     * acceptable for this burn. Useful as a front-running mitigation
     * @return amounts of tokens the user received
     */
    function removeLiquidity(
        Swap storage self,
        uint256 amount,
        uint256[] calldata minAmounts
    ) external returns (uint256[] memory) {
        LPToken lpToken = self.lpToken;
        IERC20[] memory pooledTokens = self.pooledTokens;
        require(amount <= lpToken.balanceOf(msg.sender), ">LP.balanceOf");
        require(
            minAmounts.length == pooledTokens.length,
            "minAmounts must match poolTokens"
        );

        uint256[] memory balances = self.balances;
        uint256 totalSupply = lpToken.totalSupply();

        uint256[] memory amounts = _calculateRemoveLiquidity(
            balances,
            amount,
            totalSupply
        );

        for (uint256 i = 0; i < amounts.length; i++) {
            require(amounts[i] >= minAmounts[i], "amounts[i] < minAmounts[i]");
            self.balances[i] = balances[i].sub(amounts[i]);
            pooledTokens[i].safeTransfer(msg.sender, amounts[i]);
        }

        lpToken.burnFrom(msg.sender, amount);

        emit RemoveLiquidity(msg.sender, amounts, totalSupply.sub(amount));

        return amounts;
    }

    /**
     * @notice Remove liquidity from the pool all in one token.
     * @param self Swap struct to read from and write to
     * @param tokenAmount the amount of the lp tokens to burn
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @return amount chosen token that user received
     */
    function removeLiquidityOneToken(
        Swap storage self,
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount
    ) external returns (uint256) {
        LPToken lpToken = self.lpToken;
        IERC20[] memory pooledTokens = self.pooledTokens;

        require(tokenAmount <= lpToken.balanceOf(msg.sender), ">LP.balanceOf");
        require(tokenIndex < pooledTokens.length, "Token not found");

        uint256 totalSupply = lpToken.totalSupply();

        (uint256 dy, uint256 dyFee) = _calculateWithdrawOneToken(
            self,
            tokenAmount,
            tokenIndex,
            totalSupply
        );

        require(dy >= minAmount, "dy < minAmount");

        self.balances[tokenIndex] = self.balances[tokenIndex].sub(
            dy.add(dyFee.mul(self.adminFee).div(FEE_DENOMINATOR))
        );
        lpToken.burnFrom(msg.sender, tokenAmount);
        pooledTokens[tokenIndex].safeTransfer(msg.sender, dy);

        emit RemoveLiquidityOne(
            msg.sender,
            tokenAmount,
            totalSupply,
            tokenIndex,
            dy
        );

        return dy;
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances.
     *
     * @param self Swap struct to read from and write to
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @return actual amount of LP tokens burned in the withdrawal
     */
    function removeLiquidityImbalance(
        Swap storage self,
        uint256[] memory amounts,
        uint256 maxBurnAmount
    ) public returns (uint256) {
        ManageLiquidityInfo memory v = ManageLiquidityInfo(
            0,
            0,
            0,
            _getAPrecise(self),
            self.lpToken,
            0,
            self.balances,
            self.tokenPrecisionMultipliers
        );
        v.totalSupply = v.lpToken.totalSupply();

        IERC20[] memory pooledTokens = self.pooledTokens;

        require(
            amounts.length == pooledTokens.length,
            "Amounts should match pool tokens"
        );

        require(
            maxBurnAmount <= v.lpToken.balanceOf(msg.sender) &&
                maxBurnAmount != 0,
            ">LP.balanceOf"
        );

        uint256 feePerToken = _feePerToken(self.swapFee, pooledTokens.length);
        uint256[] memory fees = new uint256[](pooledTokens.length);
        {
            uint256[] memory balances1 = new uint256[](pooledTokens.length);
            v.d0 = getD(_xp(v.balances, v.multipliers), v.preciseA);
            for (uint256 i = 0; i < pooledTokens.length; i++) {
                balances1[i] = v.balances[i].sub(
                    amounts[i],
                    "Cannot withdraw more than available"
                );
            }
            v.d1 = getD(_xp(balances1, v.multipliers), v.preciseA);

            for (uint256 i = 0; i < pooledTokens.length; i++) {
                uint256 idealBalance = v.d1.mul(v.balances[i]).div(v.d0);
                uint256 difference = idealBalance.difference(balances1[i]);
                fees[i] = feePerToken.mul(difference).div(FEE_DENOMINATOR);
                self.balances[i] = balances1[i].sub(
                    fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)
                );
                balances1[i] = balances1[i].sub(fees[i]);
            }

            v.d2 = getD(_xp(balances1, v.multipliers), v.preciseA);
        }
        uint256 tokenAmount = v.d0.sub(v.d2).mul(v.totalSupply).div(v.d0);
        require(tokenAmount != 0, "Burnt amount cannot be zero");
        tokenAmount = tokenAmount.add(1);

        require(tokenAmount <= maxBurnAmount, "tokenAmount > maxBurnAmount");

        v.lpToken.burnFrom(msg.sender, tokenAmount);

        for (uint256 i = 0; i < pooledTokens.length; i++) {
            pooledTokens[i].safeTransfer(msg.sender, amounts[i]);
        }

        emit RemoveLiquidityImbalance(
            msg.sender,
            amounts,
            fees,
            v.d1,
            v.totalSupply.sub(tokenAmount)
        );

        return tokenAmount;
    }

    /**
     * @notice withdraw all admin fees to a given address
     * @param self Swap struct to withdraw fees from
     * @param to Address to send the fees to
     */
    function withdrawAdminFees(Swap storage self, address to) external {
        IERC20[] memory pooledTokens = self.pooledTokens;
        for (uint256 i = 0; i < pooledTokens.length; i++) {
            IERC20 token = pooledTokens[i];
            uint256 balance = token.balanceOf(address(this)).sub(
                self.balances[i]
            );
            if (balance != 0) {
                token.safeTransfer(to, balance);
            }
        }
    }

    /**
     * @notice Sets the admin fee
     * @dev adminFee cannot be higher than 100% of the swap fee
     * @param self Swap struct to update
     * @param newAdminFee new admin fee to be applied on future transactions
     */
    function setAdminFee(Swap storage self, uint256 newAdminFee) external {
        require(newAdminFee <= MAX_ADMIN_FEE, "Fee is too high");
        self.adminFee = newAdminFee;

        emit NewAdminFee(newAdminFee);
    }

    /**
     * @notice update the swap fee
     * @dev fee cannot be higher than 1% of each swap
     * @param self Swap struct to update
     * @param newSwapFee new swap fee to be applied on future transactions
     */
    function setSwapFee(Swap storage self, uint256 newSwapFee) external {
        require(newSwapFee <= MAX_SWAP_FEE, "Fee is too high");
        self.swapFee = newSwapFee;

        emit NewSwapFee(newSwapFee);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20BurnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "./interfaces/ISwap.sol";

/**
 * @title Liquidity Provider Token
 * @notice This token is an ERC20 detailed token with added capability to be minted by the owner.
 * It is used to represent user's shares when providing liquidity to swap contracts.
 * @dev Only Swap contracts should initialize and own LPToken contracts.
 */
contract LPToken is ERC20BurnableUpgradeable, OwnableUpgradeable {
    using SafeMathUpgradeable for uint256;

    /**
     * @notice Initializes this LPToken contract with the given name and symbol
     * @dev The caller of this function will become the owner. A Swap contract should call this
     * in its initializer function.
     * @param name name of this token
     * @param symbol symbol of this token
     */
    function initialize(string memory name, string memory symbol)
        external
        initializer
        returns (bool)
    {
        __Context_init_unchained();
        __ERC20_init_unchained(name, symbol);
        __Ownable_init_unchained();
        return true;
    }

    /**
     * @notice Mints the given amount of LPToken to the recipient.
     * @dev only owner can call this mint function
     * @param recipient address of account to receive the tokens
     * @param amount amount of tokens to mint
     */
    function mint(address recipient, uint256 amount) external onlyOwner {
        require(amount != 0, "LPToken: cannot mint 0");
        _mint(recipient, amount);
    }

    /**
     * @dev Overrides ERC20._beforeTokenTransfer() which get called on every transfers including
     * minting and burning. This ensures that Swap.updateUserWithdrawFees are called everytime.
     * This assumes the owner is set to a Swap contract's address.
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual override(ERC20Upgradeable) {
        super._beforeTokenTransfer(from, to, amount);
        require(to != address(this), "LPToken: cannot send to itself");
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";

/**
 * @title MathUtils library
 * @notice A library to be used in conjunction with SafeMath. Contains functions for calculating
 * differences between two uint256.
 */
library MathUtils {
    /**
     * @notice Compares a and b and returns true if the difference between a and b
     *         is less than 1 or equal to each other.
     * @param a uint256 to compare with
     * @param b uint256 to compare with
     * @return True if the difference between a and b is less than 1 or equal,
     *         otherwise return false
     */
    function within1(uint256 a, uint256 b) internal pure returns (bool) {
        return (difference(a, b) <= 1);
    }

    /**
     * @notice Calculates absolute difference between a and b
     * @param a uint256 to compare with
     * @param b uint256 to compare with
     * @return Difference between a and b
     */
    function difference(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a > b) {
            return a - b;
        }
        return b - a;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/ContextUpgradeable.sol";
import "./ERC20Upgradeable.sol";
import "../../proxy/Initializable.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
    function __ERC20Burnable_init() internal initializer {
        __Context_init_unchained();
        __ERC20Burnable_init_unchained();
    }

    function __ERC20Burnable_init_unchained() internal initializer {
    }
    using SafeMathUpgradeable for uint256;

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal initializer {
        __Context_init_unchained();
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal initializer {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./IAllowlist.sol";

interface ISwap {
    // pool data view functions
    function getA() external view returns (uint256);

    function getAllowlist() external view returns (IAllowlist);

    function getToken(uint8 index) external view returns (IERC20);

    function getTokenIndex(address tokenAddress) external view returns (uint8);

    function getTokenBalance(uint8 index) external view returns (uint256);

    function getVirtualPrice() external view returns (uint256);

    function isGuarded() external view returns (bool);

    // min return calculation functions
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256);

    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        returns (uint256);

    function calculateRemoveLiquidity(uint256 amount)
        external
        view
        returns (uint256[] memory);

    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256 availableTokenAmount);

    // state modifying functions
    function initialize(
        IERC20[] memory pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 a,
        uint256 fee,
        uint256 adminFee,
        address lpTokenTargetAddress
    ) external;

    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external returns (uint256[] memory);

    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal initializer {
        __Context_init_unchained();
    }

    function __Context_init_unchained() internal initializer {
    }
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/ContextUpgradeable.sol";
import "./IERC20Upgradeable.sol";
import "../../math/SafeMathUpgradeable.sol";
import "../../proxy/Initializable.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable {
    using SafeMathUpgradeable for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal initializer {
        __Context_init_unchained();
        __ERC20_init_unchained(name_, symbol_);
    }

    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal initializer {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
    uint256[44] private __gap;
}

// SPDX-License-Identifier: MIT

// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;

import "../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 */
abstract contract Initializable {

    /**
     * @dev Indicates that the contract has been initialized.
     */
    bool private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Modifier to protect an initializer function from being invoked twice.
     */
    modifier initializer() {
        require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");

        bool isTopLevelCall = !_initializing;
        if (isTopLevelCall) {
            _initializing = true;
            _initialized = true;
        }

        _;

        if (isTopLevelCall) {
            _initializing = false;
        }
    }

    /// @dev Returns true if and only if the function is running in the constructor
    function _isConstructor() private view returns (bool) {
        return !AddressUpgradeable.isContract(address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20Upgradeable {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMathUpgradeable {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

interface IAllowlist {
    function getPoolAccountLimit(address poolAddress)
        external
        view
        returns (uint256);

    function getPoolCap(address poolAddress) external view returns (uint256);

    function verifyAddress(address account, bytes32[] calldata merkleProof)
        external
        returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/proxy/Clones.sol";
import "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol";
import "./OwnerPausableUpgradeable.sol";
import "./SwapUtils.sol";
import "./AmplificationUtils.sol";

/**
 * @title Swap - A StableSwap implementation in solidity.
 * @notice This contract is responsible for custody of closely pegged assets (eg. group of stablecoins)
 * and automatic market making system. Users become an LP (Liquidity Provider) by depositing their tokens
 * in desired ratios for an exchange of the pool token that represents their share of the pool.
 * Users can burn pool tokens and withdraw their share of token(s).
 *
 * Each time a swap between the pooled tokens happens, a set fee incurs which effectively gets
 * distributed to the LPs.
 *
 * In case of emergencies, admin can pause additional deposits, swaps, or single-asset withdraws - which
 * stops the ratio of the tokens in the pool from changing.
 * Users can always withdraw their tokens via multi-asset withdraws.
 *
 * @dev Most of the logic is stored as a library `SwapUtils` for the sake of reducing contract's
 * deployment size.
 */
contract Swap is OwnerPausableUpgradeable, ReentrancyGuardUpgradeable {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;
    using SwapUtils for SwapUtils.Swap;
    using AmplificationUtils for SwapUtils.Swap;

    // Struct storing data responsible for automatic market maker functionalities. In order to
    // access this data, this contract uses SwapUtils library. For more details, see SwapUtils.sol
    SwapUtils.Swap public swapStorage;

    // Maps token address to an index in the pool. Used to prevent duplicate tokens in the pool.
    // getTokenIndex function also relies on this mapping to retrieve token index.
    mapping(address => uint8) private tokenIndexes;

    /*** EVENTS ***/

    // events replicated from SwapUtils to make the ABI easier for dumb
    // clients
    event TokenSwap(
        address indexed buyer,
        uint256 tokensSold,
        uint256 tokensBought,
        uint128 soldId,
        uint128 boughtId
    );
    event AddLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event RemoveLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256 lpTokenSupply
    );
    event RemoveLiquidityOne(
        address indexed provider,
        uint256 lpTokenAmount,
        uint256 lpTokenSupply,
        uint256 boughtId,
        uint256 tokensBought
    );
    event RemoveLiquidityImbalance(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event NewAdminFee(uint256 newAdminFee);
    event NewSwapFee(uint256 newSwapFee);
    event NewWithdrawFee(uint256 newWithdrawFee);
    event RampA(
        uint256 oldA,
        uint256 newA,
        uint256 initialTime,
        uint256 futureTime
    );
    event StopRampA(uint256 currentA, uint256 time);

    /**
     * @notice Initializes this Swap contract with the given parameters.
     * This will also clone a LPToken contract that represents users'
     * LP positions. The owner of LPToken will be this contract - which means
     * only this contract is allowed to mint/burn tokens.
     *
     * @param _pooledTokens an array of ERC20s this pool will accept
     * @param decimals the decimals to use for each pooled token,
     * eg 8 for WBTC. Cannot be larger than POOL_PRECISION_DECIMALS
     * @param lpTokenName the long-form name of the token to be deployed
     * @param lpTokenSymbol the short symbol for the token to be deployed
     * @param _a the amplification coefficient * n * (n - 1). See the
     * StableSwap paper for details
     * @param _fee default swap fee to be initialized with
     * @param _adminFee default adminFee to be initialized with
     * @param lpTokenTargetAddress the address of an existing LPToken contract to use as a target
     */
    function initialize(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress
    ) public virtual initializer {
        __OwnerPausable_init();
        __ReentrancyGuard_init();
        // Check _pooledTokens and precisions parameter
        require(_pooledTokens.length > 1, "_pooledTokens.length <= 1");
        require(_pooledTokens.length <= 32, "_pooledTokens.length > 32");
        require(
            _pooledTokens.length == decimals.length,
            "_pooledTokens decimals mismatch"
        );

        uint256[] memory precisionMultipliers = new uint256[](decimals.length);

        for (uint8 i = 0; i < _pooledTokens.length; i++) {
            if (i > 0) {
                // Check if index is already used. Check if 0th element is a duplicate.
                require(
                    tokenIndexes[address(_pooledTokens[i])] == 0 &&
                        _pooledTokens[0] != _pooledTokens[i],
                    "Duplicate tokens"
                );
            }
            require(
                address(_pooledTokens[i]) != address(0),
                "The 0 address isn't an ERC-20"
            );
            require(
                decimals[i] <= SwapUtils.POOL_PRECISION_DECIMALS,
                "Token decimals exceeds max"
            );
            precisionMultipliers[i] =
                10 **
                    uint256(SwapUtils.POOL_PRECISION_DECIMALS).sub(
                        uint256(decimals[i])
                    );
            tokenIndexes[address(_pooledTokens[i])] = i;
        }

        // Check _a, _fee, _adminFee, _withdrawFee parameters
        require(_a < AmplificationUtils.MAX_A, "_a exceeds maximum");
        require(_fee < SwapUtils.MAX_SWAP_FEE, "_fee exceeds maximum");
        require(
            _adminFee < SwapUtils.MAX_ADMIN_FEE,
            "_adminFee exceeds maximum"
        );

        // Clone and initialize a LPToken contract
        LPToken lpToken = LPToken(Clones.clone(lpTokenTargetAddress));
        require(
            lpToken.initialize(lpTokenName, lpTokenSymbol),
            "could not init lpToken clone"
        );

        // Initialize swapStorage struct
        swapStorage.lpToken = lpToken;
        swapStorage.pooledTokens = _pooledTokens;
        swapStorage.tokenPrecisionMultipliers = precisionMultipliers;
        swapStorage.balances = new uint256[](_pooledTokens.length);
        swapStorage.initialA = _a.mul(AmplificationUtils.A_PRECISION);
        swapStorage.futureA = _a.mul(AmplificationUtils.A_PRECISION);
        // swapStorage.initialATime = 0;
        // swapStorage.futureATime = 0;
        swapStorage.swapFee = _fee;
        swapStorage.adminFee = _adminFee;
    }

    /*** MODIFIERS ***/

    /**
     * @notice Modifier to check deadline against current timestamp
     * @param deadline latest timestamp to accept this transaction
     */
    modifier deadlineCheck(uint256 deadline) {
        require(block.timestamp <= deadline, "Deadline not met");
        _;
    }

    /*** VIEW FUNCTIONS ***/

    /**
     * @notice Return A, the amplification coefficient * n * (n - 1)
     * @dev See the StableSwap paper for details
     * @return A parameter
     */
    function getA() external view virtual returns (uint256) {
        return swapStorage.getA();
    }

    /**
     * @notice Return A in its raw precision form
     * @dev See the StableSwap paper for details
     * @return A parameter in its raw precision form
     */
    function getAPrecise() external view virtual returns (uint256) {
        return swapStorage.getAPrecise();
    }

    /**
     * @notice Return address of the pooled token at given index. Reverts if tokenIndex is out of range.
     * @param index the index of the token
     * @return address of the token at given index
     */
    function getToken(uint8 index) public view virtual returns (IERC20) {
        require(index < swapStorage.pooledTokens.length, "Out of range");
        return swapStorage.pooledTokens[index];
    }

    /**
     * @notice Return the index of the given token address. Reverts if no matching
     * token is found.
     * @param tokenAddress address of the token
     * @return the index of the given token address
     */
    function getTokenIndex(address tokenAddress)
        public
        view
        virtual
        returns (uint8)
    {
        uint8 index = tokenIndexes[tokenAddress];
        require(
            address(getToken(index)) == tokenAddress,
            "Token does not exist"
        );
        return index;
    }

    /**
     * @notice Return current balance of the pooled token at given index
     * @param index the index of the token
     * @return current balance of the pooled token at given index with token's native precision
     */
    function getTokenBalance(uint8 index)
        external
        view
        virtual
        returns (uint256)
    {
        require(index < swapStorage.pooledTokens.length, "Index out of range");
        return swapStorage.balances[index];
    }

    /**
     * @notice Get the virtual price, to help calculate profit
     * @return the virtual price, scaled to the POOL_PRECISION_DECIMALS
     */
    function getVirtualPrice() external view virtual returns (uint256) {
        return swapStorage.getVirtualPrice();
    }

    /**
     * @notice Calculate amount of tokens you receive on swap
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell. If the token charges
     * a fee on transfers, use the amount that gets transferred after the fee.
     * @return amount of tokens the user will receive
     */
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view virtual returns (uint256) {
        return swapStorage.calculateSwap(tokenIndexFrom, tokenIndexTo, dx);
    }

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return token amount the user will receive
     */
    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        virtual
        returns (uint256)
    {
        return swapStorage.calculateTokenAmount(amounts, deposit);
    }

    /**
     * @notice A simple method to calculate amount of each underlying
     * tokens that is returned upon burning given amount of LP tokens
     * @param amount the amount of LP tokens that would be burned on withdrawal
     * @return array of token balances that the user will receive
     */
    function calculateRemoveLiquidity(uint256 amount)
        external
        view
        virtual
        returns (uint256[] memory)
    {
        return swapStorage.calculateRemoveLiquidity(amount);
    }

    /**
     * @notice Calculate the amount of underlying token available to withdraw
     * when withdrawing via only single token
     * @param tokenAmount the amount of LP token to burn
     * @param tokenIndex index of which token will be withdrawn
     * @return availableTokenAmount calculated amount of underlying token
     * available to withdraw
     */
    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view virtual returns (uint256 availableTokenAmount) {
        return swapStorage.calculateWithdrawOneToken(tokenAmount, tokenIndex);
    }

    /**
     * @notice This function reads the accumulated amount of admin fees of the token with given index
     * @param index Index of the pooled token
     * @return admin's token balance in the token's precision
     */
    function getAdminBalance(uint256 index)
        external
        view
        virtual
        returns (uint256)
    {
        return swapStorage.getAdminBalance(index);
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice Swap two tokens using this pool
     * @param tokenIndexFrom the token the user wants to swap from
     * @param tokenIndexTo the token the user wants to swap to
     * @param dx the amount of tokens the user wants to swap from
     * @param minDy the min amount the user would like to receive, or revert.
     * @param deadline latest timestamp to accept this transaction
     */
    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return swapStorage.swap(tokenIndexFrom, tokenIndexTo, dx, minDy);
    }

    /**
     * @notice Add liquidity to the pool with the given amounts of tokens
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP token user minted and received
     */
    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return swapStorage.addLiquidity(amounts, minToMint);
    }

    /**
     * @notice Burn LP tokens to remove liquidity from the pool. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @dev Liquidity can always be removed, even when the pool is paused.
     * @param amount the amount of LP tokens to burn
     * @param minAmounts the minimum amounts of each token in the pool
     *        acceptable for this burn. Useful as a front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amounts of tokens user received
     */
    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        deadlineCheck(deadline)
        returns (uint256[] memory)
    {
        return swapStorage.removeLiquidity(amount, minAmounts);
    }

    /**
     * @notice Remove liquidity from the pool all in one token. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param tokenAmount the amount of the token you want to receive
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @param deadline latest timestamp to accept this transaction
     * @return amount of chosen token user received
     */
    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return
            swapStorage.removeLiquidityOneToken(
                tokenAmount,
                tokenIndex,
                minAmount
            );
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP tokens burned
     */
    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return swapStorage.removeLiquidityImbalance(amounts, maxBurnAmount);
    }

    /*** ADMIN FUNCTIONS ***/

    /**
     * @notice Withdraw all admin fees to the contract owner
     */
    function withdrawAdminFees() external onlyOwner {
        swapStorage.withdrawAdminFees(owner());
    }

    /**
     * @notice Update the admin fee. Admin fee takes portion of the swap fee.
     * @param newAdminFee new admin fee to be applied on future transactions
     */
    function setAdminFee(uint256 newAdminFee) external onlyOwner {
        swapStorage.setAdminFee(newAdminFee);
    }

    /**
     * @notice Update the swap fee to be applied on swaps
     * @param newSwapFee new swap fee to be applied on future transactions
     */
    function setSwapFee(uint256 newSwapFee) external onlyOwner {
        swapStorage.setSwapFee(newSwapFee);
    }

    /**
     * @notice Start ramping up or down A parameter towards given futureA and futureTime
     * Checks if the change is too rapid, and commits the new A value only when it falls under
     * the limit range.
     * @param futureA the new A to ramp towards
     * @param futureTime timestamp when the new A should be reached
     */
    function rampA(uint256 futureA, uint256 futureTime) external onlyOwner {
        swapStorage.rampA(futureA, futureTime);
    }

    /**
     * @notice Stop ramping A immediately. Reverts if ramp A is already stopped.
     */
    function stopRampA() external onlyOwner {
        swapStorage.stopRampA();
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-1167[EIP 1167] is a standard for
 * deploying minimal proxy contracts, also known as "clones".
 *
 * > To simply and cheaply clone contract functionality in an immutable way, this standard specifies
 * > a minimal bytecode implementation that delegates all calls to a known, fixed address.
 *
 * The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`
 * (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the
 * deterministic method.
 *
 * _Available since v3.4._
 */
library Clones {
    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `master`.
     *
     * This function uses the create opcode, which should never revert.
     */
    function clone(address master) internal returns (address instance) {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(ptr, 0x14), shl(0x60, master))
            mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            instance := create(0, ptr, 0x37)
        }
        require(instance != address(0), "ERC1167: create failed");
    }

    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `master`.
     *
     * This function uses the create2 opcode and a `salt` to deterministically deploy
     * the clone. Using the same `master` and `salt` multiple time will revert, since
     * the clones cannot be deployed twice at the same address.
     */
    function cloneDeterministic(address master, bytes32 salt) internal returns (address instance) {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(ptr, 0x14), shl(0x60, master))
            mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
            instance := create2(0, ptr, 0x37, salt)
        }
        require(instance != address(0), "ERC1167: create2 failed");
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(address master, bytes32 salt, address deployer) internal pure returns (address predicted) {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
            mstore(add(ptr, 0x14), shl(0x60, master))
            mstore(add(ptr, 0x28), 0x5af43d82803e903d91602b57fd5bf3ff00000000000000000000000000000000)
            mstore(add(ptr, 0x38), shl(0x60, deployer))
            mstore(add(ptr, 0x4c), salt)
            mstore(add(ptr, 0x6c), keccak256(ptr, 0x37))
            predicted := keccak256(add(ptr, 0x37), 0x55)
        }
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(address master, bytes32 salt) internal view returns (address predicted) {
        return predictDeterministicAddress(master, salt, address(this));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    function __ReentrancyGuard_init() internal initializer {
        __ReentrancyGuard_init_unchained();
    }

    function __ReentrancyGuard_init_unchained() internal initializer {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/PausableUpgradeable.sol";

/**
 * @title OwnerPausable
 * @notice An ownable contract allows the owner to pause and unpause the
 * contract without a delay.
 * @dev Only methods using the provided modifiers will be paused.
 */
abstract contract OwnerPausableUpgradeable is
    OwnableUpgradeable,
    PausableUpgradeable
{
    function __OwnerPausable_init() internal initializer {
        __Context_init_unchained();
        __Ownable_init_unchained();
        __Pausable_init_unchained();
    }

    /**
     * @notice Pause the contract. Revert if already paused.
     */
    function pause() external onlyOwner {
        PausableUpgradeable._pause();
    }

    /**
     * @notice Unpause the contract. Revert if already unpaused.
     */
    function unpause() external onlyOwner {
        PausableUpgradeable._unpause();
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./ContextUpgradeable.sol";
import "../proxy/Initializable.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal initializer {
        __Context_init_unchained();
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal initializer {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT WITH AGPL-3.0-only

pragma solidity 0.6.12;

import "./Swap.sol";
import "./interfaces/IFlashLoanReceiver.sol";

/**
 * @title Swap - A StableSwap implementation in solidity.
 * @notice This contract is responsible for custody of closely pegged assets (eg. group of stablecoins)
 * and automatic market making system. Users become an LP (Liquidity Provider) by depositing their tokens
 * in desired ratios for an exchange of the pool token that represents their share of the pool.
 * Users can burn pool tokens and withdraw their share of token(s).
 *
 * Each time a swap between the pooled tokens happens, a set fee incurs which effectively gets
 * distributed to the LPs.
 *
 * In case of emergencies, admin can pause additional deposits, swaps, or single-asset withdraws - which
 * stops the ratio of the tokens in the pool from changing.
 * Users can always withdraw their tokens via multi-asset withdraws.
 *
 * @dev Most of the logic is stored as a library `SwapUtils` for the sake of reducing contract's
 * deployment size.
 */
contract SwapFlashLoan is Swap {
    // Total fee that is charged on all flashloans in BPS. Borrowers must repay the amount plus the flash loan fee.
    // This fee is split between the protocol and the pool.
    uint256 public flashLoanFeeBPS;
    // Share of the flash loan fee that goes to the protocol in BPS. A portion of each flash loan fee is allocated
    // to the protocol rather than the pool.
    uint256 public protocolFeeShareBPS;
    // Max BPS for limiting flash loan fee settings.
    uint256 public constant MAX_BPS = 10000;

    /*** EVENTS ***/
    event FlashLoan(
        address indexed receiver,
        uint8 tokenIndex,
        uint256 amount,
        uint256 amountFee,
        uint256 protocolFee
    );

    /**
     * @notice Initializes this Swap contract with the given parameters.
     * This will also clone a LPToken contract that represents users'
     * LP positions. The owner of LPToken will be this contract - which means
     * only this contract is allowed to mint/burn tokens.
     *
     * @param _pooledTokens an array of ERC20s this pool will accept
     * @param decimals the decimals to use for each pooled token,
     * eg 8 for WBTC. Cannot be larger than POOL_PRECISION_DECIMALS
     * @param lpTokenName the long-form name of the token to be deployed
     * @param lpTokenSymbol the short symbol for the token to be deployed
     * @param _a the amplification coefficient * n * (n - 1). See the
     * StableSwap paper for details
     * @param _fee default swap fee to be initialized with
     * @param _adminFee default adminFee to be initialized with
     * @param lpTokenTargetAddress the address of an existing LPToken contract to use as a target
     */
    function initialize(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress
    ) public virtual override initializer {
        Swap.initialize(
            _pooledTokens,
            decimals,
            lpTokenName,
            lpTokenSymbol,
            _a,
            _fee,
            _adminFee,
            lpTokenTargetAddress
        );
        flashLoanFeeBPS = 8; // 8 bps
        protocolFeeShareBPS = 0; // 0 bps
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice Borrow the specified token from this pool for this transaction only. This function will call
     * `IFlashLoanReceiver(receiver).executeOperation` and the `receiver` must return the full amount of the token
     * and the associated fee by the end of the callback transaction. If the conditions are not met, this call
     * is reverted.
     * @param receiver the address of the receiver of the token. This address must implement the IFlashLoanReceiver
     * interface and the callback function `executeOperation`.
     * @param token the protocol fee in bps to be applied on the total flash loan fee
     * @param amount the total amount to borrow in this transaction
     * @param params optional data to pass along to the callback function
     */
    function flashLoan(
        address receiver,
        IERC20 token,
        uint256 amount,
        bytes memory params
    ) external nonReentrant {
        uint8 tokenIndex = getTokenIndex(address(token));
        uint256 availableLiquidityBefore = token.balanceOf(address(this));
        uint256 protocolBalanceBefore = availableLiquidityBefore.sub(
            swapStorage.balances[tokenIndex]
        );
        require(
            amount > 0 && availableLiquidityBefore >= amount,
            "invalid amount"
        );

        // Calculate the additional amount of tokens the pool should end up with
        uint256 amountFee = amount.mul(flashLoanFeeBPS).div(10000);
        // Calculate the portion of the fee that will go to the protocol
        uint256 protocolFee = amountFee.mul(protocolFeeShareBPS).div(10000);
        require(amountFee > 0, "amount is small for a flashLoan");

        // Transfer the requested amount of tokens
        token.safeTransfer(receiver, amount);

        // Execute callback function on receiver
        IFlashLoanReceiver(receiver).executeOperation(
            address(this),
            address(token),
            amount,
            amountFee,
            params
        );

        uint256 availableLiquidityAfter = token.balanceOf(address(this));
        require(
            availableLiquidityAfter >= availableLiquidityBefore.add(amountFee),
            "flashLoan fee is not met"
        );

        swapStorage.balances[tokenIndex] = availableLiquidityAfter
            .sub(protocolBalanceBefore)
            .sub(protocolFee);
        emit FlashLoan(receiver, tokenIndex, amount, amountFee, protocolFee);
    }

    /*** ADMIN FUNCTIONS ***/

    /**
     * @notice Updates the flash loan fee parameters. This function can only be called by the owner.
     * @param newFlashLoanFeeBPS the total fee in bps to be applied on future flash loans
     * @param newProtocolFeeShareBPS the protocol fee in bps to be applied on the total flash loan fee
     */
    function setFlashLoanFees(
        uint256 newFlashLoanFeeBPS,
        uint256 newProtocolFeeShareBPS
    ) external onlyOwner {
        require(
            newFlashLoanFeeBPS > 0 &&
                newFlashLoanFeeBPS <= MAX_BPS &&
                newProtocolFeeShareBPS <= MAX_BPS,
            "fees are not in valid range"
        );
        flashLoanFeeBPS = newFlashLoanFeeBPS;
        protocolFeeShareBPS = newProtocolFeeShareBPS;
    }
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.6.12;

/**
 * @title IFlashLoanReceiver interface
 * @notice Interface for the Saddle fee IFlashLoanReceiver. Modified from Aave's IFlashLoanReceiver interface.
 * https://github.com/aave/aave-protocol/blob/4b4545fb583fd4f400507b10f3c3114f45b8a037/contracts/flashloan/interfaces/IFlashLoanReceiver.sol
 * @author Aave
 * @dev implement this interface to develop a flashloan-compatible flashLoanReceiver contract
 **/
interface IFlashLoanReceiver {
    function executeOperation(
        address pool,
        address token,
        uint256 amount,
        uint256 fee,
        bytes calldata params
    ) external;
}

// SPDX-License-Identifier: MIT WITH AGPL-3.0-only

pragma solidity 0.6.12;

import "./SwapV1.sol";
import "./interfaces/IFlashLoanReceiver.sol";

/**
 * @title Swap - A StableSwap implementation in solidity.
 * @notice This contract is responsible for custody of closely pegged assets (eg. group of stablecoins)
 * and automatic market making system. Users become an LP (Liquidity Provider) by depositing their tokens
 * in desired ratios for an exchange of the pool token that represents their share of the pool.
 * Users can burn pool tokens and withdraw their share of token(s).
 *
 * Each time a swap between the pooled tokens happens, a set fee incurs which effectively gets
 * distributed to the LPs.
 *
 * In case of emergencies, admin can pause additional deposits, swaps, or single-asset withdraws - which
 * stops the ratio of the tokens in the pool from changing.
 * Users can always withdraw their tokens via multi-asset withdraws.
 *
 * @dev Most of the logic is stored as a library `SwapUtils` for the sake of reducing contract's
 * deployment size.
 */
contract SwapFlashLoanV1 is SwapV1 {
    // Total fee that is charged on all flashloans in BPS. Borrowers must repay the amount plus the flash loan fee.
    // This fee is split between the protocol and the pool.
    uint256 public flashLoanFeeBPS;
    // Share of the flash loan fee that goes to the protocol in BPS. A portion of each flash loan fee is allocated
    // to the protocol rather than the pool.
    uint256 public protocolFeeShareBPS;
    // Max BPS for limiting flash loan fee settings.
    uint256 public constant MAX_BPS = 10000;

    /*** EVENTS ***/
    event FlashLoan(
        address indexed receiver,
        uint8 tokenIndex,
        uint256 amount,
        uint256 amountFee,
        uint256 protocolFee
    );

    /**
     * @notice Initializes this Swap contract with the given parameters.
     * This will also clone a LPToken contract that represents users'
     * LP positions. The owner of LPToken will be this contract - which means
     * only this contract is allowed to mint/burn tokens.
     *
     * @param _pooledTokens an array of ERC20s this pool will accept
     * @param decimals the decimals to use for each pooled token,
     * eg 8 for WBTC. Cannot be larger than POOL_PRECISION_DECIMALS
     * @param lpTokenName the long-form name of the token to be deployed
     * @param lpTokenSymbol the short symbol for the token to be deployed
     * @param _a the amplification coefficient * n * (n - 1). See the
     * StableSwap paper for details
     * @param _fee default swap fee to be initialized with
     * @param _adminFee default adminFee to be initialized with
     * @param _withdrawFee default withdrawFee to be initialized with
     * @param lpTokenTargetAddress the address of an existing LPToken contract to use as a target
     */
    function initialize(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        uint256 _withdrawFee,
        address lpTokenTargetAddress
    ) public virtual override initializer {
        SwapV1.initialize(
            _pooledTokens,
            decimals,
            lpTokenName,
            lpTokenSymbol,
            _a,
            _fee,
            _adminFee,
            _withdrawFee,
            lpTokenTargetAddress
        );
        flashLoanFeeBPS = 8; // 8 bps
        protocolFeeShareBPS = 0; // 0 bps
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice Borrow the specified token from this pool for this transaction only. This function will call
     * `IFlashLoanReceiver(receiver).executeOperation` and the `receiver` must return the full amount of the token
     * and the associated fee by the end of the callback transaction. If the conditions are not met, this call
     * is reverted.
     * @param receiver the address of the receiver of the token. This address must implement the IFlashLoanReceiver
     * interface and the callback function `executeOperation`.
     * @param token the protocol fee in bps to be applied on the total flash loan fee
     * @param amount the total amount to borrow in this transaction
     * @param params optional data to pass along to the callback function
     */
    function flashLoan(
        address receiver,
        IERC20 token,
        uint256 amount,
        bytes memory params
    ) external nonReentrant {
        uint8 tokenIndex = getTokenIndex(address(token));
        uint256 availableLiquidityBefore = token.balanceOf(address(this));
        uint256 protocolBalanceBefore = availableLiquidityBefore.sub(
            swapStorage.balances[tokenIndex]
        );
        require(
            amount > 0 && availableLiquidityBefore >= amount,
            "invalid amount"
        );

        // Calculate the additional amount of tokens the pool should end up with
        uint256 amountFee = amount.mul(flashLoanFeeBPS).div(10000);
        // Calculate the portion of the fee that will go to the protocol
        uint256 protocolFee = amountFee.mul(protocolFeeShareBPS).div(10000);
        require(amountFee > 0, "amount is small for a flashLoan");

        // Transfer the requested amount of tokens
        token.safeTransfer(receiver, amount);

        // Execute callback function on receiver
        IFlashLoanReceiver(receiver).executeOperation(
            address(this),
            address(token),
            amount,
            amountFee,
            params
        );

        uint256 availableLiquidityAfter = token.balanceOf(address(this));
        require(
            availableLiquidityAfter >= availableLiquidityBefore.add(amountFee),
            "flashLoan fee is not met"
        );

        swapStorage.balances[tokenIndex] = availableLiquidityAfter
            .sub(protocolBalanceBefore)
            .sub(protocolFee);
        emit FlashLoan(receiver, tokenIndex, amount, amountFee, protocolFee);
    }

    /*** ADMIN FUNCTIONS ***/

    /**
     * @notice Updates the flash loan fee parameters. This function can only be called by the owner.
     * @param newFlashLoanFeeBPS the total fee in bps to be applied on future flash loans
     * @param newProtocolFeeShareBPS the protocol fee in bps to be applied on the total flash loan fee
     */
    function setFlashLoanFees(
        uint256 newFlashLoanFeeBPS,
        uint256 newProtocolFeeShareBPS
    ) external onlyOwner {
        require(
            newFlashLoanFeeBPS > 0 &&
                newFlashLoanFeeBPS <= MAX_BPS &&
                newProtocolFeeShareBPS <= MAX_BPS,
            "fees are not in valid range"
        );
        flashLoanFeeBPS = newFlashLoanFeeBPS;
        protocolFeeShareBPS = newProtocolFeeShareBPS;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/proxy/Clones.sol";
import "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol";
import "./OwnerPausableUpgradeable.sol";
import "./SwapUtilsV1.sol";
import "./AmplificationUtilsV1.sol";

/**
 * @title Swap - A StableSwap implementation in solidity.
 * @notice This contract is responsible for custody of closely pegged assets (eg. group of stablecoins)
 * and automatic market making system. Users become an LP (Liquidity Provider) by depositing their tokens
 * in desired ratios for an exchange of the pool token that represents their share of the pool.
 * Users can burn pool tokens and withdraw their share of token(s).
 *
 * Each time a swap between the pooled tokens happens, a set fee incurs which effectively gets
 * distributed to the LPs.
 *
 * In case of emergencies, admin can pause additional deposits, swaps, or single-asset withdraws - which
 * stops the ratio of the tokens in the pool from changing.
 * Users can always withdraw their tokens via multi-asset withdraws.
 *
 * @dev Most of the logic is stored as a library `SwapUtils` for the sake of reducing contract's
 * deployment size.
 */
contract SwapV1 is OwnerPausableUpgradeable, ReentrancyGuardUpgradeable {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;
    using SwapUtilsV1 for SwapUtilsV1.Swap;
    using AmplificationUtilsV1 for SwapUtilsV1.Swap;

    // Struct storing data responsible for automatic market maker functionalities. In order to
    // access this data, this contract uses SwapUtils library. For more details, see SwapUtilsV1.sol
    SwapUtilsV1.Swap public swapStorage;

    // Maps token address to an index in the pool. Used to prevent duplicate tokens in the pool.
    // getTokenIndex function also relies on this mapping to retrieve token index.
    mapping(address => uint8) private tokenIndexes;

    /*** EVENTS ***/

    // events replicated from SwapUtils to make the ABI easier for dumb
    // clients
    event TokenSwap(
        address indexed buyer,
        uint256 tokensSold,
        uint256 tokensBought,
        uint128 soldId,
        uint128 boughtId
    );
    event AddLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event RemoveLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256 lpTokenSupply
    );
    event RemoveLiquidityOne(
        address indexed provider,
        uint256 lpTokenAmount,
        uint256 lpTokenSupply,
        uint256 boughtId,
        uint256 tokensBought
    );
    event RemoveLiquidityImbalance(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event NewAdminFee(uint256 newAdminFee);
    event NewSwapFee(uint256 newSwapFee);
    event NewWithdrawFee(uint256 newWithdrawFee);
    event RampA(
        uint256 oldA,
        uint256 newA,
        uint256 initialTime,
        uint256 futureTime
    );
    event StopRampA(uint256 currentA, uint256 time);

    /**
     * @notice Initializes this Swap contract with the given parameters.
     * This will also clone a LPToken contract that represents users'
     * LP positions. The owner of LPToken will be this contract - which means
     * only this contract is allowed to mint/burn tokens.
     *
     * @param _pooledTokens an array of ERC20s this pool will accept
     * @param decimals the decimals to use for each pooled token,
     * eg 8 for WBTC. Cannot be larger than POOL_PRECISION_DECIMALS
     * @param lpTokenName the long-form name of the token to be deployed
     * @param lpTokenSymbol the short symbol for the token to be deployed
     * @param _a the amplification coefficient * n * (n - 1). See the
     * StableSwap paper for details
     * @param _fee default swap fee to be initialized with
     * @param _adminFee default adminFee to be initialized with
     * @param _withdrawFee default withdrawFee to be initialized with
     * @param lpTokenTargetAddress the address of an existing LPToken contract to use as a target
     */
    function initialize(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        uint256 _withdrawFee,
        address lpTokenTargetAddress
    ) public virtual initializer {
        __OwnerPausable_init();
        __ReentrancyGuard_init();
        // Check _pooledTokens and precisions parameter
        require(_pooledTokens.length > 1, "_pooledTokens.length <= 1");
        require(_pooledTokens.length <= 32, "_pooledTokens.length > 32");
        require(
            _pooledTokens.length == decimals.length,
            "_pooledTokens decimals mismatch"
        );

        uint256[] memory precisionMultipliers = new uint256[](decimals.length);

        for (uint8 i = 0; i < _pooledTokens.length; i++) {
            if (i > 0) {
                // Check if index is already used. Check if 0th element is a duplicate.
                require(
                    tokenIndexes[address(_pooledTokens[i])] == 0 &&
                        _pooledTokens[0] != _pooledTokens[i],
                    "Duplicate tokens"
                );
            }
            require(
                address(_pooledTokens[i]) != address(0),
                "The 0 address isn't an ERC-20"
            );
            require(
                decimals[i] <= SwapUtilsV1.POOL_PRECISION_DECIMALS,
                "Token decimals exceeds max"
            );
            precisionMultipliers[i] =
                10 **
                    uint256(SwapUtilsV1.POOL_PRECISION_DECIMALS).sub(
                        uint256(decimals[i])
                    );
            tokenIndexes[address(_pooledTokens[i])] = i;
        }

        // Check _a, _fee, _adminFee, _withdrawFee parameters
        require(_a < AmplificationUtilsV1.MAX_A, "_a exceeds maximum");
        require(_fee < SwapUtilsV1.MAX_SWAP_FEE, "_fee exceeds maximum");
        require(
            _adminFee < SwapUtilsV1.MAX_ADMIN_FEE,
            "_adminFee exceeds maximum"
        );
        require(
            _withdrawFee < SwapUtilsV1.MAX_WITHDRAW_FEE,
            "_withdrawFee exceeds maximum"
        );

        // Clone and initialize a LPToken contract
        LPToken lpToken = LPToken(Clones.clone(lpTokenTargetAddress));
        require(
            lpToken.initialize(lpTokenName, lpTokenSymbol),
            "could not init lpToken clone"
        );

        // Initialize swapStorage struct
        swapStorage.lpToken = lpToken;
        swapStorage.pooledTokens = _pooledTokens;
        swapStorage.tokenPrecisionMultipliers = precisionMultipliers;
        swapStorage.balances = new uint256[](_pooledTokens.length);
        swapStorage.initialA = _a.mul(AmplificationUtilsV1.A_PRECISION);
        swapStorage.futureA = _a.mul(AmplificationUtilsV1.A_PRECISION);
        // swapStorage.initialATime = 0;
        // swapStorage.futureATime = 0;
        swapStorage.swapFee = _fee;
        swapStorage.adminFee = _adminFee;
        swapStorage.defaultWithdrawFee = _withdrawFee;
    }

    /*** MODIFIERS ***/

    /**
     * @notice Modifier to check deadline against current timestamp
     * @param deadline latest timestamp to accept this transaction
     */
    modifier deadlineCheck(uint256 deadline) {
        require(block.timestamp <= deadline, "Deadline not met");
        _;
    }

    /*** VIEW FUNCTIONS ***/

    /**
     * @notice Return A, the amplification coefficient * n * (n - 1)
     * @dev See the StableSwap paper for details
     * @return A parameter
     */
    function getA() external view virtual returns (uint256) {
        return swapStorage.getA();
    }

    /**
     * @notice Return A in its raw precision form
     * @dev See the StableSwap paper for details
     * @return A parameter in its raw precision form
     */
    function getAPrecise() external view virtual returns (uint256) {
        return swapStorage.getAPrecise();
    }

    /**
     * @notice Return address of the pooled token at given index. Reverts if tokenIndex is out of range.
     * @param index the index of the token
     * @return address of the token at given index
     */
    function getToken(uint8 index) public view virtual returns (IERC20) {
        require(index < swapStorage.pooledTokens.length, "Out of range");
        return swapStorage.pooledTokens[index];
    }

    /**
     * @notice Return the index of the given token address. Reverts if no matching
     * token is found.
     * @param tokenAddress address of the token
     * @return the index of the given token address
     */
    function getTokenIndex(address tokenAddress)
        public
        view
        virtual
        returns (uint8)
    {
        uint8 index = tokenIndexes[tokenAddress];
        require(
            address(getToken(index)) == tokenAddress,
            "Token does not exist"
        );
        return index;
    }

    /**
     * @notice Return timestamp of last deposit of given address
     * @return timestamp of the last deposit made by the given address
     */
    function getDepositTimestamp(address user)
        external
        view
        virtual
        returns (uint256)
    {
        return swapStorage.getDepositTimestamp(user);
    }

    /**
     * @notice Return current balance of the pooled token at given index
     * @param index the index of the token
     * @return current balance of the pooled token at given index with token's native precision
     */
    function getTokenBalance(uint8 index)
        external
        view
        virtual
        returns (uint256)
    {
        require(index < swapStorage.pooledTokens.length, "Index out of range");
        return swapStorage.balances[index];
    }

    /**
     * @notice Get the virtual price, to help calculate profit
     * @return the virtual price, scaled to the POOL_PRECISION_DECIMALS
     */
    function getVirtualPrice() external view virtual returns (uint256) {
        return swapStorage.getVirtualPrice();
    }

    /**
     * @notice Calculate amount of tokens you receive on swap
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell. If the token charges
     * a fee on transfers, use the amount that gets transferred after the fee.
     * @return amount of tokens the user will receive
     */
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view virtual returns (uint256) {
        return swapStorage.calculateSwap(tokenIndexFrom, tokenIndexTo, dx);
    }

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param account address that is depositing or withdrawing tokens
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return token amount the user will receive
     */
    function calculateTokenAmount(
        address account,
        uint256[] calldata amounts,
        bool deposit
    ) external view virtual returns (uint256) {
        return swapStorage.calculateTokenAmount(account, amounts, deposit);
    }

    /**
     * @notice A simple method to calculate amount of each underlying
     * tokens that is returned upon burning given amount of LP tokens
     * @param account the address that is withdrawing tokens
     * @param amount the amount of LP tokens that would be burned on withdrawal
     * @return array of token balances that the user will receive
     */
    function calculateRemoveLiquidity(address account, uint256 amount)
        external
        view
        virtual
        returns (uint256[] memory)
    {
        return swapStorage.calculateRemoveLiquidity(account, amount);
    }

    /**
     * @notice Calculate the amount of underlying token available to withdraw
     * when withdrawing via only single token
     * @param account the address that is withdrawing tokens
     * @param tokenAmount the amount of LP token to burn
     * @param tokenIndex index of which token will be withdrawn
     * @return availableTokenAmount calculated amount of underlying token
     * available to withdraw
     */
    function calculateRemoveLiquidityOneToken(
        address account,
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view virtual returns (uint256 availableTokenAmount) {
        return
            swapStorage.calculateWithdrawOneToken(
                account,
                tokenAmount,
                tokenIndex
            );
    }

    /**
     * @notice Calculate the fee that is applied when the given user withdraws. The withdraw fee
     * decays linearly over period of 4 weeks. For example, depositing and withdrawing right away
     * will charge you the full amount of withdraw fee. But withdrawing after 4 weeks will charge you
     * no additional fees.
     * @dev returned value should be divided by FEE_DENOMINATOR to convert to correct decimals
     * @param user address you want to calculate withdraw fee of
     * @return current withdraw fee of the user
     */
    function calculateCurrentWithdrawFee(address user)
        external
        view
        virtual
        returns (uint256)
    {
        return swapStorage.calculateCurrentWithdrawFee(user);
    }

    /**
     * @notice This function reads the accumulated amount of admin fees of the token with given index
     * @param index Index of the pooled token
     * @return admin's token balance in the token's precision
     */
    function getAdminBalance(uint256 index)
        external
        view
        virtual
        returns (uint256)
    {
        return swapStorage.getAdminBalance(index);
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice Swap two tokens using this pool
     * @param tokenIndexFrom the token the user wants to swap from
     * @param tokenIndexTo the token the user wants to swap to
     * @param dx the amount of tokens the user wants to swap from
     * @param minDy the min amount the user would like to receive, or revert.
     * @param deadline latest timestamp to accept this transaction
     */
    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return swapStorage.swap(tokenIndexFrom, tokenIndexTo, dx, minDy);
    }

    /**
     * @notice Add liquidity to the pool with the given amounts of tokens
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP token user minted and received
     */
    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return swapStorage.addLiquidity(amounts, minToMint);
    }

    /**
     * @notice Burn LP tokens to remove liquidity from the pool. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @dev Liquidity can always be removed, even when the pool is paused.
     * @param amount the amount of LP tokens to burn
     * @param minAmounts the minimum amounts of each token in the pool
     *        acceptable for this burn. Useful as a front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amounts of tokens user received
     */
    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        deadlineCheck(deadline)
        returns (uint256[] memory)
    {
        return swapStorage.removeLiquidity(amount, minAmounts);
    }

    /**
     * @notice Remove liquidity from the pool all in one token. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param tokenAmount the amount of the token you want to receive
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @param deadline latest timestamp to accept this transaction
     * @return amount of chosen token user received
     */
    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return
            swapStorage.removeLiquidityOneToken(
                tokenAmount,
                tokenIndex,
                minAmount
            );
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP tokens burned
     */
    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return swapStorage.removeLiquidityImbalance(amounts, maxBurnAmount);
    }

    /*** ADMIN FUNCTIONS ***/

    /**
     * @notice Updates the user withdraw fee. This function can only be called by
     * the pool token. Should be used to update the withdraw fee on transfer of pool tokens.
     * Transferring your pool token will reset the 4 weeks period. If the recipient is already
     * holding some pool tokens, the withdraw fee will be discounted in respective amounts.
     * @param recipient address of the recipient of pool token
     * @param transferAmount amount of pool token to transfer
     */
    function updateUserWithdrawFee(address recipient, uint256 transferAmount)
        external
    {
        require(
            msg.sender == address(swapStorage.lpToken),
            "Only callable by pool token"
        );
        swapStorage.updateUserWithdrawFee(recipient, transferAmount);
    }

    /**
     * @notice Withdraw all admin fees to the contract owner
     */
    function withdrawAdminFees() external onlyOwner {
        swapStorage.withdrawAdminFees(owner());
    }

    /**
     * @notice Update the admin fee. Admin fee takes portion of the swap fee.
     * @param newAdminFee new admin fee to be applied on future transactions
     */
    function setAdminFee(uint256 newAdminFee) external onlyOwner {
        swapStorage.setAdminFee(newAdminFee);
    }

    /**
     * @notice Update the swap fee to be applied on swaps
     * @param newSwapFee new swap fee to be applied on future transactions
     */
    function setSwapFee(uint256 newSwapFee) external onlyOwner {
        swapStorage.setSwapFee(newSwapFee);
    }

    /**
     * @notice Update the withdraw fee. This fee decays linearly over 4 weeks since
     * user's last deposit.
     * @param newWithdrawFee new withdraw fee to be applied on future deposits
     */
    function setDefaultWithdrawFee(uint256 newWithdrawFee) external onlyOwner {
        swapStorage.setDefaultWithdrawFee(newWithdrawFee);
    }

    /**
     * @notice Start ramping up or down A parameter towards given futureA and futureTime
     * Checks if the change is too rapid, and commits the new A value only when it falls under
     * the limit range.
     * @param futureA the new A to ramp towards
     * @param futureTime timestamp when the new A should be reached
     */
    function rampA(uint256 futureA, uint256 futureTime) external onlyOwner {
        swapStorage.rampA(futureA, futureTime);
    }

    /**
     * @notice Stop ramping A immediately. Reverts if ramp A is already stopped.
     */
    function stopRampA() external onlyOwner {
        swapStorage.stopRampA();
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./AmplificationUtilsV1.sol";
import "./LPToken.sol";
import "./MathUtils.sol";

/**
 * @title SwapUtils library
 * @notice A library to be used within Swap.sol. Contains functions responsible for custody and AMM functionalities.
 * @dev Contracts relying on this library must initialize SwapUtils.Swap struct then use this library
 * for SwapUtils.Swap struct. Note that this library contains both functions called by users and admins.
 * Admin functions should be protected within contracts using this library.
 */
library SwapUtilsV1 {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;
    using MathUtils for uint256;

    /*** EVENTS ***/

    event TokenSwap(
        address indexed buyer,
        uint256 tokensSold,
        uint256 tokensBought,
        uint128 soldId,
        uint128 boughtId
    );
    event AddLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event RemoveLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256 lpTokenSupply
    );
    event RemoveLiquidityOne(
        address indexed provider,
        uint256 lpTokenAmount,
        uint256 lpTokenSupply,
        uint256 boughtId,
        uint256 tokensBought
    );
    event RemoveLiquidityImbalance(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event NewAdminFee(uint256 newAdminFee);
    event NewSwapFee(uint256 newSwapFee);
    event NewWithdrawFee(uint256 newWithdrawFee);

    struct Swap {
        // variables around the ramp management of A,
        // the amplification coefficient * n * (n - 1)
        // see https://www.curve.fi/stableswap-paper.pdf for details
        uint256 initialA;
        uint256 futureA;
        uint256 initialATime;
        uint256 futureATime;
        // fee calculation
        uint256 swapFee;
        uint256 adminFee;
        uint256 defaultWithdrawFee;
        LPToken lpToken;
        // contract references for all tokens being pooled
        IERC20[] pooledTokens;
        // multipliers for each pooled token's precision to get to POOL_PRECISION_DECIMALS
        // for example, TBTC has 18 decimals, so the multiplier should be 1. WBTC
        // has 8, so the multiplier should be 10 ** 18 / 10 ** 8 => 10 ** 10
        uint256[] tokenPrecisionMultipliers;
        // the pool balance of each token, in the token's precision
        // the contract's actual token balance might differ
        uint256[] balances;
        mapping(address => uint256) depositTimestamp;
        mapping(address => uint256) withdrawFeeMultiplier;
    }

    // Struct storing variables used in calculations in the
    // calculateWithdrawOneTokenDY function to avoid stack too deep errors
    struct CalculateWithdrawOneTokenDYInfo {
        uint256 d0;
        uint256 d1;
        uint256 newY;
        uint256 feePerToken;
        uint256 preciseA;
    }

    // Struct storing variables used in calculations in the
    // {add,remove}Liquidity functions to avoid stack too deep errors
    struct ManageLiquidityInfo {
        uint256 d0;
        uint256 d1;
        uint256 d2;
        uint256 preciseA;
        LPToken lpToken;
        uint256 totalSupply;
        uint256[] balances;
        uint256[] multipliers;
    }

    // the precision all pools tokens will be converted to
    uint8 public constant POOL_PRECISION_DECIMALS = 18;

    // the denominator used to calculate admin and LP fees. For example, an
    // LP fee might be something like tradeAmount.mul(fee).div(FEE_DENOMINATOR)
    uint256 private constant FEE_DENOMINATOR = 10**10;

    // Max swap fee is 1% or 100bps of each swap
    uint256 public constant MAX_SWAP_FEE = 10**8;

    // Max adminFee is 100% of the swapFee
    // adminFee does not add additional fee on top of swapFee
    // Instead it takes a certain % of the swapFee. Therefore it has no impact on the
    // users but only on the earnings of LPs
    uint256 public constant MAX_ADMIN_FEE = 10**10;

    // Max withdrawFee is 1% of the value withdrawn
    // Fee will be redistributed to the LPs in the pool, rewarding
    // long term providers.
    uint256 public constant MAX_WITHDRAW_FEE = 10**8;

    // Constant value used as max loop limit
    uint256 private constant MAX_LOOP_LIMIT = 256;

    // Time that it should take for the withdraw fee to fully decay to 0
    uint256 public constant WITHDRAW_FEE_DECAY_TIME = 4 weeks;

    /*** VIEW & PURE FUNCTIONS ***/

    /**
     * @notice Retrieves the timestamp of last deposit made by the given address
     * @param self Swap struct to read from
     * @return timestamp of last deposit
     */
    function getDepositTimestamp(Swap storage self, address user)
        external
        view
        returns (uint256)
    {
        return self.depositTimestamp[user];
    }

    function _getAPrecise(Swap storage self) internal view returns (uint256) {
        return AmplificationUtilsV1._getAPrecise(self);
    }

    /**
     * @notice Calculate the dy, the amount of selected token that user receives and
     * the fee of withdrawing in one token
     * @param account the address that is withdrawing
     * @param tokenAmount the amount to withdraw in the pool's precision
     * @param tokenIndex which token will be withdrawn
     * @param self Swap struct to read from
     * @return the amount of token user will receive
     */
    function calculateWithdrawOneToken(
        Swap storage self,
        address account,
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256) {
        (uint256 availableTokenAmount, ) = _calculateWithdrawOneToken(
            self,
            account,
            tokenAmount,
            tokenIndex,
            self.lpToken.totalSupply()
        );
        return availableTokenAmount;
    }

    function _calculateWithdrawOneToken(
        Swap storage self,
        address account,
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 totalSupply
    ) internal view returns (uint256, uint256) {
        uint256 dy;
        uint256 newY;
        uint256 currentY;

        (dy, newY, currentY) = calculateWithdrawOneTokenDY(
            self,
            tokenIndex,
            tokenAmount,
            totalSupply
        );

        // dy_0 (without fees)
        // dy, dy_0 - dy

        uint256 dySwapFee = currentY
            .sub(newY)
            .div(self.tokenPrecisionMultipliers[tokenIndex])
            .sub(dy);

        dy = dy
            .mul(
                FEE_DENOMINATOR.sub(_calculateCurrentWithdrawFee(self, account))
            )
            .div(FEE_DENOMINATOR);

        return (dy, dySwapFee);
    }

    /**
     * @notice Calculate the dy of withdrawing in one token
     * @param self Swap struct to read from
     * @param tokenIndex which token will be withdrawn
     * @param tokenAmount the amount to withdraw in the pools precision
     * @return the d and the new y after withdrawing one token
     */
    function calculateWithdrawOneTokenDY(
        Swap storage self,
        uint8 tokenIndex,
        uint256 tokenAmount,
        uint256 totalSupply
    )
        internal
        view
        returns (
            uint256,
            uint256,
            uint256
        )
    {
        // Get the current D, then solve the stableswap invariant
        // y_i for D - tokenAmount
        uint256[] memory xp = _xp(self);

        require(tokenIndex < xp.length, "Token index out of range");

        CalculateWithdrawOneTokenDYInfo
            memory v = CalculateWithdrawOneTokenDYInfo(0, 0, 0, 0, 0);
        v.preciseA = _getAPrecise(self);
        v.d0 = getD(xp, v.preciseA);
        v.d1 = v.d0.sub(tokenAmount.mul(v.d0).div(totalSupply));

        require(tokenAmount <= xp[tokenIndex], "Withdraw exceeds available");

        v.newY = getYD(v.preciseA, tokenIndex, xp, v.d1);

        uint256[] memory xpReduced = new uint256[](xp.length);

        v.feePerToken = _feePerToken(self.swapFee, xp.length);
        for (uint256 i = 0; i < xp.length; i++) {
            uint256 xpi = xp[i];
            // if i == tokenIndex, dxExpected = xp[i] * d1 / d0 - newY
            // else dxExpected = xp[i] - (xp[i] * d1 / d0)
            // xpReduced[i] -= dxExpected * fee / FEE_DENOMINATOR
            xpReduced[i] = xpi.sub(
                (
                    (i == tokenIndex)
                        ? xpi.mul(v.d1).div(v.d0).sub(v.newY)
                        : xpi.sub(xpi.mul(v.d1).div(v.d0))
                ).mul(v.feePerToken).div(FEE_DENOMINATOR)
            );
        }

        uint256 dy = xpReduced[tokenIndex].sub(
            getYD(v.preciseA, tokenIndex, xpReduced, v.d1)
        );
        dy = dy.sub(1).div(self.tokenPrecisionMultipliers[tokenIndex]);

        return (dy, v.newY, xp[tokenIndex]);
    }

    /**
     * @notice Calculate the price of a token in the pool with given
     * precision-adjusted balances and a particular D.
     *
     * @dev This is accomplished via solving the invariant iteratively.
     * See the StableSwap paper and Curve.fi implementation for further details.
     *
     * x_1**2 + x1 * (sum' - (A*n**n - 1) * D / (A * n**n)) = D ** (n + 1) / (n ** (2 * n) * prod' * A)
     * x_1**2 + b*x_1 = c
     * x_1 = (x_1**2 + c) / (2*x_1 + b)
     *
     * @param a the amplification coefficient * n * (n - 1). See the StableSwap paper for details.
     * @param tokenIndex Index of token we are calculating for.
     * @param xp a precision-adjusted set of pool balances. Array should be
     * the same cardinality as the pool.
     * @param d the stableswap invariant
     * @return the price of the token, in the same precision as in xp
     */
    function getYD(
        uint256 a,
        uint8 tokenIndex,
        uint256[] memory xp,
        uint256 d
    ) internal pure returns (uint256) {
        uint256 numTokens = xp.length;
        require(tokenIndex < numTokens, "Token not found");

        uint256 c = d;
        uint256 s;
        uint256 nA = a.mul(numTokens);

        for (uint256 i = 0; i < numTokens; i++) {
            if (i != tokenIndex) {
                s = s.add(xp[i]);
                c = c.mul(d).div(xp[i].mul(numTokens));
                // If we were to protect the division loss we would have to keep the denominator separate
                // and divide at the end. However this leads to overflow with large numTokens or/and D.
                // c = c * D * D * D * ... overflow!
            }
        }
        c = c.mul(d).mul(AmplificationUtilsV1.A_PRECISION).div(
            nA.mul(numTokens)
        );

        uint256 b = s.add(d.mul(AmplificationUtilsV1.A_PRECISION).div(nA));
        uint256 yPrev;
        uint256 y = d;
        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {
            yPrev = y;
            y = y.mul(y).add(c).div(y.mul(2).add(b).sub(d));
            if (y.within1(yPrev)) {
                return y;
            }
        }
        revert("Approximation did not converge");
    }

    /**
     * @notice Get D, the StableSwap invariant, based on a set of balances and a particular A.
     * @param xp a precision-adjusted set of pool balances. Array should be the same cardinality
     * as the pool.
     * @param a the amplification coefficient * n * (n - 1) in A_PRECISION.
     * See the StableSwap paper for details
     * @return the invariant, at the precision of the pool
     */
    function getD(uint256[] memory xp, uint256 a)
        internal
        pure
        returns (uint256)
    {
        uint256 numTokens = xp.length;
        uint256 s;
        for (uint256 i = 0; i < numTokens; i++) {
            s = s.add(xp[i]);
        }
        if (s == 0) {
            return 0;
        }

        uint256 prevD;
        uint256 d = s;
        uint256 nA = a.mul(numTokens);

        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {
            uint256 dP = d;
            for (uint256 j = 0; j < numTokens; j++) {
                dP = dP.mul(d).div(xp[j].mul(numTokens));
                // If we were to protect the division loss we would have to keep the denominator separate
                // and divide at the end. However this leads to overflow with large numTokens or/and D.
                // dP = dP * D * D * D * ... overflow!
            }
            prevD = d;
            d = nA
                .mul(s)
                .div(AmplificationUtilsV1.A_PRECISION)
                .add(dP.mul(numTokens))
                .mul(d)
                .div(
                    nA
                        .sub(AmplificationUtilsV1.A_PRECISION)
                        .mul(d)
                        .div(AmplificationUtilsV1.A_PRECISION)
                        .add(numTokens.add(1).mul(dP))
                );
            if (d.within1(prevD)) {
                return d;
            }
        }

        // Convergence should occur in 4 loops or less. If this is reached, there may be something wrong
        // with the pool. If this were to occur repeatedly, LPs should withdraw via `removeLiquidity()`
        // function which does not rely on D.
        revert("D does not converge");
    }

    /**
     * @notice Given a set of balances and precision multipliers, return the
     * precision-adjusted balances.
     *
     * @param balances an array of token balances, in their native precisions.
     * These should generally correspond with pooled tokens.
     *
     * @param precisionMultipliers an array of multipliers, corresponding to
     * the amounts in the balances array. When multiplied together they
     * should yield amounts at the pool's precision.
     *
     * @return an array of amounts "scaled" to the pool's precision
     */
    function _xp(
        uint256[] memory balances,
        uint256[] memory precisionMultipliers
    ) internal pure returns (uint256[] memory) {
        uint256 numTokens = balances.length;
        require(
            numTokens == precisionMultipliers.length,
            "Balances must match multipliers"
        );
        uint256[] memory xp = new uint256[](numTokens);
        for (uint256 i = 0; i < numTokens; i++) {
            xp[i] = balances[i].mul(precisionMultipliers[i]);
        }
        return xp;
    }

    /**
     * @notice Return the precision-adjusted balances of all tokens in the pool
     * @param self Swap struct to read from
     * @return the pool balances "scaled" to the pool's precision, allowing
     * them to be more easily compared.
     */
    function _xp(Swap storage self) internal view returns (uint256[] memory) {
        return _xp(self.balances, self.tokenPrecisionMultipliers);
    }

    /**
     * @notice Get the virtual price, to help calculate profit
     * @param self Swap struct to read from
     * @return the virtual price, scaled to precision of POOL_PRECISION_DECIMALS
     */
    function getVirtualPrice(Swap storage self)
        external
        view
        returns (uint256)
    {
        uint256 d = getD(_xp(self), _getAPrecise(self));
        LPToken lpToken = self.lpToken;
        uint256 supply = lpToken.totalSupply();
        if (supply > 0) {
            return d.mul(10**uint256(POOL_PRECISION_DECIMALS)).div(supply);
        }
        return 0;
    }

    /**
     * @notice Calculate the new balances of the tokens given the indexes of the token
     * that is swapped from (FROM) and the token that is swapped to (TO).
     * This function is used as a helper function to calculate how much TO token
     * the user should receive on swap.
     *
     * @param preciseA precise form of amplification coefficient
     * @param tokenIndexFrom index of FROM token
     * @param tokenIndexTo index of TO token
     * @param x the new total amount of FROM token
     * @param xp balances of the tokens in the pool
     * @return the amount of TO token that should remain in the pool
     */
    function getY(
        uint256 preciseA,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 x,
        uint256[] memory xp
    ) internal pure returns (uint256) {
        uint256 numTokens = xp.length;
        require(
            tokenIndexFrom != tokenIndexTo,
            "Can't compare token to itself"
        );
        require(
            tokenIndexFrom < numTokens && tokenIndexTo < numTokens,
            "Tokens must be in pool"
        );

        uint256 d = getD(xp, preciseA);
        uint256 c = d;
        uint256 s;
        uint256 nA = numTokens.mul(preciseA);

        uint256 _x;
        for (uint256 i = 0; i < numTokens; i++) {
            if (i == tokenIndexFrom) {
                _x = x;
            } else if (i != tokenIndexTo) {
                _x = xp[i];
            } else {
                continue;
            }
            s = s.add(_x);
            c = c.mul(d).div(_x.mul(numTokens));
            // If we were to protect the division loss we would have to keep the denominator separate
            // and divide at the end. However this leads to overflow with large numTokens or/and D.
            // c = c * D * D * D * ... overflow!
        }
        c = c.mul(d).mul(AmplificationUtilsV1.A_PRECISION).div(
            nA.mul(numTokens)
        );
        uint256 b = s.add(d.mul(AmplificationUtilsV1.A_PRECISION).div(nA));
        uint256 yPrev;
        uint256 y = d;

        // iterative approximation
        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {
            yPrev = y;
            y = y.mul(y).add(c).div(y.mul(2).add(b).sub(d));
            if (y.within1(yPrev)) {
                return y;
            }
        }
        revert("Approximation did not converge");
    }

    /**
     * @notice Externally calculates a swap between two tokens.
     * @param self Swap struct to read from
     * @param tokenIndexFrom the token to sell
     * @param tokenIndexTo the token to buy
     * @param dx the number of tokens to sell. If the token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @return dy the number of tokens the user will get
     */
    function calculateSwap(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256 dy) {
        (dy, ) = _calculateSwap(
            self,
            tokenIndexFrom,
            tokenIndexTo,
            dx,
            self.balances
        );
    }

    /**
     * @notice Internally calculates a swap between two tokens.
     *
     * @dev The caller is expected to transfer the actual amounts (dx and dy)
     * using the token contracts.
     *
     * @param self Swap struct to read from
     * @param tokenIndexFrom the token to sell
     * @param tokenIndexTo the token to buy
     * @param dx the number of tokens to sell. If the token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @return dy the number of tokens the user will get
     * @return dyFee the associated fee
     */
    function _calculateSwap(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256[] memory balances
    ) internal view returns (uint256 dy, uint256 dyFee) {
        uint256[] memory multipliers = self.tokenPrecisionMultipliers;
        uint256[] memory xp = _xp(balances, multipliers);
        require(
            tokenIndexFrom < xp.length && tokenIndexTo < xp.length,
            "Token index out of range"
        );
        uint256 x = dx.mul(multipliers[tokenIndexFrom]).add(xp[tokenIndexFrom]);
        uint256 y = getY(
            _getAPrecise(self),
            tokenIndexFrom,
            tokenIndexTo,
            x,
            xp
        );
        dy = xp[tokenIndexTo].sub(y).sub(1);
        dyFee = dy.mul(self.swapFee).div(FEE_DENOMINATOR);
        dy = dy.sub(dyFee).div(multipliers[tokenIndexTo]);
    }

    /**
     * @notice A simple method to calculate amount of each underlying
     * tokens that is returned upon burning given amount of
     * LP tokens
     *
     * @param account the address that is removing liquidity. required for withdraw fee calculation
     * @param amount the amount of LP tokens that would to be burned on
     * withdrawal
     * @return array of amounts of tokens user will receive
     */
    function calculateRemoveLiquidity(
        Swap storage self,
        address account,
        uint256 amount
    ) external view returns (uint256[] memory) {
        return
            _calculateRemoveLiquidity(
                self,
                self.balances,
                account,
                amount,
                self.lpToken.totalSupply()
            );
    }

    function _calculateRemoveLiquidity(
        Swap storage self,
        uint256[] memory balances,
        address account,
        uint256 amount,
        uint256 totalSupply
    ) internal view returns (uint256[] memory) {
        require(amount <= totalSupply, "Cannot exceed total supply");

        uint256 feeAdjustedAmount = amount
            .mul(
                FEE_DENOMINATOR.sub(_calculateCurrentWithdrawFee(self, account))
            )
            .div(FEE_DENOMINATOR);

        uint256[] memory amounts = new uint256[](balances.length);

        for (uint256 i = 0; i < balances.length; i++) {
            amounts[i] = balances[i].mul(feeAdjustedAmount).div(totalSupply);
        }
        return amounts;
    }

    /**
     * @notice Calculate the fee that is applied when the given user withdraws.
     * Withdraw fee decays linearly over WITHDRAW_FEE_DECAY_TIME.
     * @param user address you want to calculate withdraw fee of
     * @return current withdraw fee of the user
     */
    function calculateCurrentWithdrawFee(Swap storage self, address user)
        external
        view
        returns (uint256)
    {
        return _calculateCurrentWithdrawFee(self, user);
    }

    function _calculateCurrentWithdrawFee(Swap storage self, address user)
        internal
        view
        returns (uint256)
    {
        uint256 endTime = self.depositTimestamp[user].add(
            WITHDRAW_FEE_DECAY_TIME
        );
        if (endTime > block.timestamp) {
            uint256 timeLeftover = endTime.sub(block.timestamp);
            return
                self
                    .defaultWithdrawFee
                    .mul(self.withdrawFeeMultiplier[user])
                    .mul(timeLeftover)
                    .div(WITHDRAW_FEE_DECAY_TIME)
                    .div(FEE_DENOMINATOR);
        }
        return 0;
    }

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param self Swap struct to read from
     * @param account address of the account depositing or withdrawing tokens
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return if deposit was true, total amount of lp token that will be minted and if
     * deposit was false, total amount of lp token that will be burned
     */
    function calculateTokenAmount(
        Swap storage self,
        address account,
        uint256[] calldata amounts,
        bool deposit
    ) external view returns (uint256) {
        uint256 a = _getAPrecise(self);
        uint256[] memory balances = self.balances;
        uint256[] memory multipliers = self.tokenPrecisionMultipliers;

        uint256 d0 = getD(_xp(balances, multipliers), a);
        for (uint256 i = 0; i < balances.length; i++) {
            if (deposit) {
                balances[i] = balances[i].add(amounts[i]);
            } else {
                balances[i] = balances[i].sub(
                    amounts[i],
                    "Cannot withdraw more than available"
                );
            }
        }
        uint256 d1 = getD(_xp(balances, multipliers), a);
        uint256 totalSupply = self.lpToken.totalSupply();

        if (deposit) {
            return d1.sub(d0).mul(totalSupply).div(d0);
        } else {
            return
                d0.sub(d1).mul(totalSupply).div(d0).mul(FEE_DENOMINATOR).div(
                    FEE_DENOMINATOR.sub(
                        _calculateCurrentWithdrawFee(self, account)
                    )
                );
        }
    }

    /**
     * @notice return accumulated amount of admin fees of the token with given index
     * @param self Swap struct to read from
     * @param index Index of the pooled token
     * @return admin balance in the token's precision
     */
    function getAdminBalance(Swap storage self, uint256 index)
        external
        view
        returns (uint256)
    {
        require(index < self.pooledTokens.length, "Token index out of range");
        return
            self.pooledTokens[index].balanceOf(address(this)).sub(
                self.balances[index]
            );
    }

    /**
     * @notice internal helper function to calculate fee per token multiplier used in
     * swap fee calculations
     * @param swapFee swap fee for the tokens
     * @param numTokens number of tokens pooled
     */
    function _feePerToken(uint256 swapFee, uint256 numTokens)
        internal
        pure
        returns (uint256)
    {
        return swapFee.mul(numTokens).div(numTokens.sub(1).mul(4));
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice swap two tokens in the pool
     * @param self Swap struct to read from and write to
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell
     * @param minDy the min amount the user would like to receive, or revert.
     * @return amount of token user received on swap
     */
    function swap(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy
    ) external returns (uint256) {
        {
            IERC20 tokenFrom = self.pooledTokens[tokenIndexFrom];
            require(
                dx <= tokenFrom.balanceOf(msg.sender),
                "Cannot swap more than you own"
            );
            // Transfer tokens first to see if a fee was charged on transfer
            uint256 beforeBalance = tokenFrom.balanceOf(address(this));
            tokenFrom.safeTransferFrom(msg.sender, address(this), dx);

            // Use the actual transferred amount for AMM math
            dx = tokenFrom.balanceOf(address(this)).sub(beforeBalance);
        }

        uint256 dy;
        uint256 dyFee;
        uint256[] memory balances = self.balances;
        (dy, dyFee) = _calculateSwap(
            self,
            tokenIndexFrom,
            tokenIndexTo,
            dx,
            balances
        );
        require(dy >= minDy, "Swap didn't result in min tokens");

        uint256 dyAdminFee = dyFee.mul(self.adminFee).div(FEE_DENOMINATOR).div(
            self.tokenPrecisionMultipliers[tokenIndexTo]
        );

        self.balances[tokenIndexFrom] = balances[tokenIndexFrom].add(dx);
        self.balances[tokenIndexTo] = balances[tokenIndexTo].sub(dy).sub(
            dyAdminFee
        );

        self.pooledTokens[tokenIndexTo].safeTransfer(msg.sender, dy);

        emit TokenSwap(msg.sender, dx, dy, tokenIndexFrom, tokenIndexTo);

        return dy;
    }

    /**
     * @notice Add liquidity to the pool
     * @param self Swap struct to read from and write to
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * allowed addresses. If the pool is not in the guarded launch phase, this parameter will be ignored.
     * @return amount of LP token user received
     */
    function addLiquidity(
        Swap storage self,
        uint256[] memory amounts,
        uint256 minToMint
    ) external returns (uint256) {
        IERC20[] memory pooledTokens = self.pooledTokens;
        require(
            amounts.length == pooledTokens.length,
            "Amounts must match pooled tokens"
        );

        // current state
        ManageLiquidityInfo memory v = ManageLiquidityInfo(
            0,
            0,
            0,
            _getAPrecise(self),
            self.lpToken,
            0,
            self.balances,
            self.tokenPrecisionMultipliers
        );
        v.totalSupply = v.lpToken.totalSupply();

        if (v.totalSupply != 0) {
            v.d0 = getD(_xp(v.balances, v.multipliers), v.preciseA);
        }

        uint256[] memory newBalances = new uint256[](pooledTokens.length);

        for (uint256 i = 0; i < pooledTokens.length; i++) {
            require(
                v.totalSupply != 0 || amounts[i] > 0,
                "Must supply all tokens in pool"
            );

            // Transfer tokens first to see if a fee was charged on transfer
            if (amounts[i] != 0) {
                uint256 beforeBalance = pooledTokens[i].balanceOf(
                    address(this)
                );
                pooledTokens[i].safeTransferFrom(
                    msg.sender,
                    address(this),
                    amounts[i]
                );

                // Update the amounts[] with actual transfer amount
                amounts[i] = pooledTokens[i].balanceOf(address(this)).sub(
                    beforeBalance
                );
            }

            newBalances[i] = v.balances[i].add(amounts[i]);
        }

        // invariant after change
        v.d1 = getD(_xp(newBalances, v.multipliers), v.preciseA);
        require(v.d1 > v.d0, "D should increase");

        // updated to reflect fees and calculate the user's LP tokens
        v.d2 = v.d1;
        uint256[] memory fees = new uint256[](pooledTokens.length);

        if (v.totalSupply != 0) {
            uint256 feePerToken = _feePerToken(
                self.swapFee,
                pooledTokens.length
            );
            for (uint256 i = 0; i < pooledTokens.length; i++) {
                uint256 idealBalance = v.d1.mul(v.balances[i]).div(v.d0);
                fees[i] = feePerToken
                    .mul(idealBalance.difference(newBalances[i]))
                    .div(FEE_DENOMINATOR);
                self.balances[i] = newBalances[i].sub(
                    fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)
                );
                newBalances[i] = newBalances[i].sub(fees[i]);
            }
            v.d2 = getD(_xp(newBalances, v.multipliers), v.preciseA);
        } else {
            // the initial depositor doesn't pay fees
            self.balances = newBalances;
        }

        uint256 toMint;
        if (v.totalSupply == 0) {
            toMint = v.d1;
        } else {
            toMint = v.d2.sub(v.d0).mul(v.totalSupply).div(v.d0);
        }

        require(toMint >= minToMint, "Couldn't mint min requested");

        // mint the user's LP tokens
        v.lpToken.mint(msg.sender, toMint);

        emit AddLiquidity(
            msg.sender,
            amounts,
            fees,
            v.d1,
            v.totalSupply.add(toMint)
        );

        return toMint;
    }

    /**
     * @notice Update the withdraw fee for `user`. If the user is currently
     * not providing liquidity in the pool, sets to default value. If not, recalculate
     * the starting withdraw fee based on the last deposit's time & amount relative
     * to the new deposit.
     *
     * @param self Swap struct to read from and write to
     * @param user address of the user depositing tokens
     * @param toMint amount of pool tokens to be minted
     */
    function updateUserWithdrawFee(
        Swap storage self,
        address user,
        uint256 toMint
    ) public {
        // If token is transferred to address 0 (or burned), don't update the fee.
        if (user == address(0)) {
            return;
        }
        if (self.defaultWithdrawFee == 0) {
            // If current fee is set to 0%, set multiplier to FEE_DENOMINATOR
            self.withdrawFeeMultiplier[user] = FEE_DENOMINATOR;
        } else {
            // Otherwise, calculate appropriate discount based on last deposit amount
            uint256 currentFee = _calculateCurrentWithdrawFee(self, user);
            uint256 currentBalance = self.lpToken.balanceOf(user);

            // ((currentBalance * currentFee) + (toMint * defaultWithdrawFee)) * FEE_DENOMINATOR /
            // ((toMint + currentBalance) * defaultWithdrawFee)
            self.withdrawFeeMultiplier[user] = currentBalance
                .mul(currentFee)
                .add(toMint.mul(self.defaultWithdrawFee))
                .mul(FEE_DENOMINATOR)
                .div(toMint.add(currentBalance).mul(self.defaultWithdrawFee));
        }
        self.depositTimestamp[user] = block.timestamp;
    }

    /**
     * @notice Burn LP tokens to remove liquidity from the pool.
     * @dev Liquidity can always be removed, even when the pool is paused.
     * @param self Swap struct to read from and write to
     * @param amount the amount of LP tokens to burn
     * @param minAmounts the minimum amounts of each token in the pool
     * acceptable for this burn. Useful as a front-running mitigation
     * @return amounts of tokens the user received
     */
    function removeLiquidity(
        Swap storage self,
        uint256 amount,
        uint256[] calldata minAmounts
    ) external returns (uint256[] memory) {
        LPToken lpToken = self.lpToken;
        IERC20[] memory pooledTokens = self.pooledTokens;
        require(amount <= lpToken.balanceOf(msg.sender), ">LP.balanceOf");
        require(
            minAmounts.length == pooledTokens.length,
            "minAmounts must match poolTokens"
        );

        uint256[] memory balances = self.balances;
        uint256 totalSupply = lpToken.totalSupply();

        uint256[] memory amounts = _calculateRemoveLiquidity(
            self,
            balances,
            msg.sender,
            amount,
            totalSupply
        );

        for (uint256 i = 0; i < amounts.length; i++) {
            require(amounts[i] >= minAmounts[i], "amounts[i] < minAmounts[i]");
            self.balances[i] = balances[i].sub(amounts[i]);
            pooledTokens[i].safeTransfer(msg.sender, amounts[i]);
        }

        lpToken.burnFrom(msg.sender, amount);

        emit RemoveLiquidity(msg.sender, amounts, totalSupply.sub(amount));

        return amounts;
    }

    /**
     * @notice Remove liquidity from the pool all in one token.
     * @param self Swap struct to read from and write to
     * @param tokenAmount the amount of the lp tokens to burn
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @return amount chosen token that user received
     */
    function removeLiquidityOneToken(
        Swap storage self,
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount
    ) external returns (uint256) {
        LPToken lpToken = self.lpToken;
        IERC20[] memory pooledTokens = self.pooledTokens;

        require(tokenAmount <= lpToken.balanceOf(msg.sender), ">LP.balanceOf");
        require(tokenIndex < pooledTokens.length, "Token not found");

        uint256 totalSupply = lpToken.totalSupply();

        (uint256 dy, uint256 dyFee) = _calculateWithdrawOneToken(
            self,
            msg.sender,
            tokenAmount,
            tokenIndex,
            totalSupply
        );

        require(dy >= minAmount, "dy < minAmount");

        self.balances[tokenIndex] = self.balances[tokenIndex].sub(
            dy.add(dyFee.mul(self.adminFee).div(FEE_DENOMINATOR))
        );
        lpToken.burnFrom(msg.sender, tokenAmount);
        pooledTokens[tokenIndex].safeTransfer(msg.sender, dy);

        emit RemoveLiquidityOne(
            msg.sender,
            tokenAmount,
            totalSupply,
            tokenIndex,
            dy
        );

        return dy;
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances.
     *
     * @param self Swap struct to read from and write to
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @return actual amount of LP tokens burned in the withdrawal
     */
    function removeLiquidityImbalance(
        Swap storage self,
        uint256[] memory amounts,
        uint256 maxBurnAmount
    ) public returns (uint256) {
        ManageLiquidityInfo memory v = ManageLiquidityInfo(
            0,
            0,
            0,
            _getAPrecise(self),
            self.lpToken,
            0,
            self.balances,
            self.tokenPrecisionMultipliers
        );
        v.totalSupply = v.lpToken.totalSupply();

        IERC20[] memory pooledTokens = self.pooledTokens;

        require(
            amounts.length == pooledTokens.length,
            "Amounts should match pool tokens"
        );

        require(
            maxBurnAmount <= v.lpToken.balanceOf(msg.sender) &&
                maxBurnAmount != 0,
            ">LP.balanceOf"
        );

        uint256 feePerToken = _feePerToken(self.swapFee, pooledTokens.length);
        uint256[] memory fees = new uint256[](pooledTokens.length);
        {
            uint256[] memory balances1 = new uint256[](pooledTokens.length);
            v.d0 = getD(_xp(v.balances, v.multipliers), v.preciseA);
            for (uint256 i = 0; i < pooledTokens.length; i++) {
                balances1[i] = v.balances[i].sub(
                    amounts[i],
                    "Cannot withdraw more than available"
                );
            }
            v.d1 = getD(_xp(balances1, v.multipliers), v.preciseA);

            for (uint256 i = 0; i < pooledTokens.length; i++) {
                uint256 idealBalance = v.d1.mul(v.balances[i]).div(v.d0);
                uint256 difference = idealBalance.difference(balances1[i]);
                fees[i] = feePerToken.mul(difference).div(FEE_DENOMINATOR);
                self.balances[i] = balances1[i].sub(
                    fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)
                );
                balances1[i] = balances1[i].sub(fees[i]);
            }

            v.d2 = getD(_xp(balances1, v.multipliers), v.preciseA);
        }
        uint256 tokenAmount = v.d0.sub(v.d2).mul(v.totalSupply).div(v.d0);
        require(tokenAmount != 0, "Burnt amount cannot be zero");
        tokenAmount = tokenAmount.add(1).mul(FEE_DENOMINATOR).div(
            FEE_DENOMINATOR.sub(_calculateCurrentWithdrawFee(self, msg.sender))
        );

        require(tokenAmount <= maxBurnAmount, "tokenAmount > maxBurnAmount");

        v.lpToken.burnFrom(msg.sender, tokenAmount);

        for (uint256 i = 0; i < pooledTokens.length; i++) {
            pooledTokens[i].safeTransfer(msg.sender, amounts[i]);
        }

        emit RemoveLiquidityImbalance(
            msg.sender,
            amounts,
            fees,
            v.d1,
            v.totalSupply.sub(tokenAmount)
        );

        return tokenAmount;
    }

    /**
     * @notice withdraw all admin fees to a given address
     * @param self Swap struct to withdraw fees from
     * @param to Address to send the fees to
     */
    function withdrawAdminFees(Swap storage self, address to) external {
        IERC20[] memory pooledTokens = self.pooledTokens;
        for (uint256 i = 0; i < pooledTokens.length; i++) {
            IERC20 token = pooledTokens[i];
            uint256 balance = token.balanceOf(address(this)).sub(
                self.balances[i]
            );
            if (balance != 0) {
                token.safeTransfer(to, balance);
            }
        }
    }

    /**
     * @notice Sets the admin fee
     * @dev adminFee cannot be higher than 100% of the swap fee
     * @param self Swap struct to update
     * @param newAdminFee new admin fee to be applied on future transactions
     */
    function setAdminFee(Swap storage self, uint256 newAdminFee) external {
        require(newAdminFee <= MAX_ADMIN_FEE, "Fee is too high");
        self.adminFee = newAdminFee;

        emit NewAdminFee(newAdminFee);
    }

    /**
     * @notice update the swap fee
     * @dev fee cannot be higher than 1% of each swap
     * @param self Swap struct to update
     * @param newSwapFee new swap fee to be applied on future transactions
     */
    function setSwapFee(Swap storage self, uint256 newSwapFee) external {
        require(newSwapFee <= MAX_SWAP_FEE, "Fee is too high");
        self.swapFee = newSwapFee;

        emit NewSwapFee(newSwapFee);
    }

    /**
     * @notice update the default withdraw fee. This also affects deposits made in the past as well.
     * @param self Swap struct to update
     * @param newWithdrawFee new withdraw fee to be applied
     */
    function setDefaultWithdrawFee(Swap storage self, uint256 newWithdrawFee)
        external
    {
        require(newWithdrawFee <= MAX_WITHDRAW_FEE, "Fee is too high");
        self.defaultWithdrawFee = newWithdrawFee;

        emit NewWithdrawFee(newWithdrawFee);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./SwapUtilsV1.sol";

/**
 * @title AmplificationUtils library
 * @notice A library to calculate and ramp the A parameter of a given `SwapUtils.Swap` struct.
 * This library assumes the struct is fully validated.
 */
library AmplificationUtilsV1 {
    using SafeMath for uint256;

    event RampA(
        uint256 oldA,
        uint256 newA,
        uint256 initialTime,
        uint256 futureTime
    );
    event StopRampA(uint256 currentA, uint256 time);

    // Constant values used in ramping A calculations
    uint256 public constant A_PRECISION = 100;
    uint256 public constant MAX_A = 10**6;
    uint256 private constant MAX_A_CHANGE = 2;
    uint256 private constant MIN_RAMP_TIME = 14 days;

    /**
     * @notice Return A, the amplification coefficient * n * (n - 1)
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter
     */
    function getA(SwapUtilsV1.Swap storage self)
        external
        view
        returns (uint256)
    {
        return _getAPrecise(self).div(A_PRECISION);
    }

    /**
     * @notice Return A in its raw precision
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter in its raw precision form
     */
    function getAPrecise(SwapUtilsV1.Swap storage self)
        external
        view
        returns (uint256)
    {
        return _getAPrecise(self);
    }

    /**
     * @notice Return A in its raw precision
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter in its raw precision form
     */
    function _getAPrecise(SwapUtilsV1.Swap storage self)
        internal
        view
        returns (uint256)
    {
        uint256 t1 = self.futureATime; // time when ramp is finished
        uint256 a1 = self.futureA; // final A value when ramp is finished

        if (block.timestamp < t1) {
            uint256 t0 = self.initialATime; // time when ramp is started
            uint256 a0 = self.initialA; // initial A value when ramp is started
            if (a1 > a0) {
                // a0 + (a1 - a0) * (block.timestamp - t0) / (t1 - t0)
                return
                    a0.add(
                        a1.sub(a0).mul(block.timestamp.sub(t0)).div(t1.sub(t0))
                    );
            } else {
                // a0 - (a0 - a1) * (block.timestamp - t0) / (t1 - t0)
                return
                    a0.sub(
                        a0.sub(a1).mul(block.timestamp.sub(t0)).div(t1.sub(t0))
                    );
            }
        } else {
            return a1;
        }
    }

    /**
     * @notice Start ramping up or down A parameter towards given futureA_ and futureTime_
     * Checks if the change is too rapid, and commits the new A value only when it falls under
     * the limit range.
     * @param self Swap struct to update
     * @param futureA_ the new A to ramp towards
     * @param futureTime_ timestamp when the new A should be reached
     */
    function rampA(
        SwapUtilsV1.Swap storage self,
        uint256 futureA_,
        uint256 futureTime_
    ) external {
        require(
            block.timestamp >= self.initialATime.add(1 days),
            "Wait 1 day before starting ramp"
        );
        require(
            futureTime_ >= block.timestamp.add(MIN_RAMP_TIME),
            "Insufficient ramp time"
        );
        require(
            futureA_ > 0 && futureA_ < MAX_A,
            "futureA_ must be > 0 and < MAX_A"
        );

        uint256 initialAPrecise = _getAPrecise(self);
        uint256 futureAPrecise = futureA_.mul(A_PRECISION);

        if (futureAPrecise < initialAPrecise) {
            require(
                futureAPrecise.mul(MAX_A_CHANGE) >= initialAPrecise,
                "futureA_ is too small"
            );
        } else {
            require(
                futureAPrecise <= initialAPrecise.mul(MAX_A_CHANGE),
                "futureA_ is too large"
            );
        }

        self.initialA = initialAPrecise;
        self.futureA = futureAPrecise;
        self.initialATime = block.timestamp;
        self.futureATime = futureTime_;

        emit RampA(
            initialAPrecise,
            futureAPrecise,
            block.timestamp,
            futureTime_
        );
    }

    /**
     * @notice Stops ramping A immediately. Once this function is called, rampA()
     * cannot be called for another 24 hours
     * @param self Swap struct to update
     */
    function stopRampA(SwapUtilsV1.Swap storage self) external {
        require(self.futureATime > block.timestamp, "Ramp is already stopped");

        uint256 currentA = _getAPrecise(self);
        self.initialA = currentA;
        self.futureA = currentA;
        self.initialATime = block.timestamp;
        self.futureATime = block.timestamp;

        emit StopRampA(currentA, block.timestamp);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "../LPToken.sol";
import "../interfaces/ISwap.sol";
import "../MathUtils.sol";
import "../SwapUtils.sol";

/**
 * @title MetaSwapUtils library
 * @notice A library to be used within MetaSwap.sol. Contains functions responsible for custody and AMM functionalities.
 *
 * MetaSwap is a modified version of Swap that allows Swap's LP token to be utilized in pooling with other tokens.
 * As an example, if there is a Swap pool consisting of [DAI, USDC, USDT]. Then a MetaSwap pool can be created
 * with [sUSD, BaseSwapLPToken] to allow trades between either the LP token or the underlying tokens and sUSD.
 *
 * @dev Contracts relying on this library must initialize SwapUtils.Swap struct then use this library
 * for SwapUtils.Swap struct. Note that this library contains both functions called by users and admins.
 * Admin functions should be protected within contracts using this library.
 */
library MetaSwapUtils {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;
    using MathUtils for uint256;
    using AmplificationUtils for SwapUtils.Swap;

    /*** EVENTS ***/

    event TokenSwap(
        address indexed buyer,
        uint256 tokensSold,
        uint256 tokensBought,
        uint128 soldId,
        uint128 boughtId
    );
    event TokenSwapUnderlying(
        address indexed buyer,
        uint256 tokensSold,
        uint256 tokensBought,
        uint128 soldId,
        uint128 boughtId
    );
    event AddLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event RemoveLiquidityOne(
        address indexed provider,
        uint256 lpTokenAmount,
        uint256 lpTokenSupply,
        uint256 boughtId,
        uint256 tokensBought
    );
    event RemoveLiquidityImbalance(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event NewAdminFee(uint256 newAdminFee);
    event NewSwapFee(uint256 newSwapFee);
    event NewWithdrawFee(uint256 newWithdrawFee);

    struct MetaSwap {
        // Meta-Swap related parameters
        ISwap baseSwap;
        uint256 baseVirtualPrice;
        uint256 baseCacheLastUpdated;
        IERC20[] baseTokens;
    }

    // Struct storing variables used in calculations in the
    // calculateWithdrawOneTokenDY function to avoid stack too deep errors
    struct CalculateWithdrawOneTokenDYInfo {
        uint256 d0;
        uint256 d1;
        uint256 newY;
        uint256 feePerToken;
        uint256 preciseA;
        uint256 xpi;
    }

    // Struct storing variables used in calculation in removeLiquidityImbalance function
    // to avoid stack too deep error
    struct ManageLiquidityInfo {
        uint256 d0;
        uint256 d1;
        uint256 d2;
        LPToken lpToken;
        uint256 totalSupply;
        uint256 preciseA;
        uint256 baseVirtualPrice;
        uint256[] tokenPrecisionMultipliers;
        uint256[] newBalances;
    }

    struct SwapUnderlyingInfo {
        uint256 x;
        uint256 dx;
        uint256 dy;
        uint256[] tokenPrecisionMultipliers;
        uint256[] oldBalances;
        IERC20[] baseTokens;
        IERC20 tokenFrom;
        uint8 metaIndexFrom;
        IERC20 tokenTo;
        uint8 metaIndexTo;
        uint256 baseVirtualPrice;
    }

    struct CalculateSwapUnderlyingInfo {
        uint256 baseVirtualPrice;
        ISwap baseSwap;
        uint8 baseLPTokenIndex;
        uint8 baseTokensLength;
        uint8 metaIndexTo;
        uint256 x;
        uint256 dy;
    }

    // the denominator used to calculate admin and LP fees. For example, an
    // LP fee might be something like tradeAmount.mul(fee).div(FEE_DENOMINATOR)
    uint256 private constant FEE_DENOMINATOR = 10**10;

    // Cache expire time for the stored value of base Swap's virtual price
    uint256 public constant BASE_CACHE_EXPIRE_TIME = 10 minutes;
    uint256 public constant BASE_VIRTUAL_PRICE_PRECISION = 10**18;

    /*** VIEW & PURE FUNCTIONS ***/

    /**
     * @notice Return the stored value of base Swap's virtual price. If
     * value was updated past BASE_CACHE_EXPIRE_TIME, then read it directly
     * from the base Swap contract.
     * @param metaSwapStorage MetaSwap struct to read from
     * @return base Swap's virtual price
     */
    function _getBaseVirtualPrice(MetaSwap storage metaSwapStorage)
        internal
        view
        returns (uint256)
    {
        if (
            block.timestamp >
            metaSwapStorage.baseCacheLastUpdated + BASE_CACHE_EXPIRE_TIME
        ) {
            return metaSwapStorage.baseSwap.getVirtualPrice();
        }
        return metaSwapStorage.baseVirtualPrice;
    }

    /**
     * @notice Calculate how much the user would receive when withdrawing via single token
     * @param self Swap struct to read from
     * @param metaSwapStorage MetaSwap struct to read from
     * @param tokenAmount the amount to withdraw in the pool's precision
     * @param tokenIndex which token will be withdrawn
     * @return dy the amount of token user will receive
     */
    function calculateWithdrawOneToken(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage,
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256 dy) {
        (dy, ) = _calculateWithdrawOneToken(
            self,
            tokenAmount,
            tokenIndex,
            _getBaseVirtualPrice(metaSwapStorage),
            self.lpToken.totalSupply()
        );
    }

    function _calculateWithdrawOneToken(
        SwapUtils.Swap storage self,
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 baseVirtualPrice,
        uint256 totalSupply
    ) internal view returns (uint256, uint256) {
        uint256 dy;
        uint256 dySwapFee;

        {
            uint256 currentY;
            uint256 newY;

            // Calculate how much to withdraw
            (dy, newY, currentY) = _calculateWithdrawOneTokenDY(
                self,
                tokenIndex,
                tokenAmount,
                baseVirtualPrice,
                totalSupply
            );

            // Calculate the associated swap fee
            dySwapFee = currentY
                .sub(newY)
                .div(self.tokenPrecisionMultipliers[tokenIndex])
                .sub(dy);
        }

        return (dy, dySwapFee);
    }

    /**
     * @notice Calculate the dy of withdrawing in one token
     * @param self Swap struct to read from
     * @param tokenIndex which token will be withdrawn
     * @param tokenAmount the amount to withdraw in the pools precision
     * @param baseVirtualPrice the virtual price of the base swap's LP token
     * @return the dy excluding swap fee, the new y after withdrawing one token, and current y
     */
    function _calculateWithdrawOneTokenDY(
        SwapUtils.Swap storage self,
        uint8 tokenIndex,
        uint256 tokenAmount,
        uint256 baseVirtualPrice,
        uint256 totalSupply
    )
        internal
        view
        returns (
            uint256,
            uint256,
            uint256
        )
    {
        // Get the current D, then solve the stableswap invariant
        // y_i for D - tokenAmount
        uint256[] memory xp = _xp(self, baseVirtualPrice);
        require(tokenIndex < xp.length, "Token index out of range");

        CalculateWithdrawOneTokenDYInfo
            memory v = CalculateWithdrawOneTokenDYInfo(
                0,
                0,
                0,
                0,
                self._getAPrecise(),
                0
            );
        v.d0 = SwapUtils.getD(xp, v.preciseA);
        v.d1 = v.d0.sub(tokenAmount.mul(v.d0).div(totalSupply));

        require(tokenAmount <= xp[tokenIndex], "Withdraw exceeds available");

        v.newY = SwapUtils.getYD(v.preciseA, tokenIndex, xp, v.d1);

        uint256[] memory xpReduced = new uint256[](xp.length);

        v.feePerToken = SwapUtils._feePerToken(self.swapFee, xp.length);
        for (uint256 i = 0; i < xp.length; i++) {
            v.xpi = xp[i];
            // if i == tokenIndex, dxExpected = xp[i] * d1 / d0 - newY
            // else dxExpected = xp[i] - (xp[i] * d1 / d0)
            // xpReduced[i] -= dxExpected * fee / FEE_DENOMINATOR
            xpReduced[i] = v.xpi.sub(
                (
                    (i == tokenIndex)
                        ? v.xpi.mul(v.d1).div(v.d0).sub(v.newY)
                        : v.xpi.sub(v.xpi.mul(v.d1).div(v.d0))
                ).mul(v.feePerToken).div(FEE_DENOMINATOR)
            );
        }

        uint256 dy = xpReduced[tokenIndex].sub(
            SwapUtils.getYD(v.preciseA, tokenIndex, xpReduced, v.d1)
        );

        if (tokenIndex == xp.length.sub(1)) {
            dy = dy.mul(BASE_VIRTUAL_PRICE_PRECISION).div(baseVirtualPrice);
        }
        dy = dy.sub(1).div(self.tokenPrecisionMultipliers[tokenIndex]);

        return (dy, v.newY, xp[tokenIndex]);
    }

    /**
     * @notice Given a set of balances and precision multipliers, return the
     * precision-adjusted balances. The last element will also get scaled up by
     * the given baseVirtualPrice.
     *
     * @param balances an array of token balances, in their native precisions.
     * These should generally correspond with pooled tokens.
     *
     * @param precisionMultipliers an array of multipliers, corresponding to
     * the amounts in the balances array. When multiplied together they
     * should yield amounts at the pool's precision.
     *
     * @param baseVirtualPrice the base virtual price to scale the balance of the
     * base Swap's LP token.
     *
     * @return an array of amounts "scaled" to the pool's precision
     */
    function _xp(
        uint256[] memory balances,
        uint256[] memory precisionMultipliers,
        uint256 baseVirtualPrice
    ) internal pure returns (uint256[] memory) {
        uint256[] memory xp = SwapUtils._xp(balances, precisionMultipliers);
        uint256 baseLPTokenIndex = balances.length.sub(1);
        xp[baseLPTokenIndex] = xp[baseLPTokenIndex].mul(baseVirtualPrice).div(
            BASE_VIRTUAL_PRICE_PRECISION
        );
        return xp;
    }

    /**
     * @notice Return the precision-adjusted balances of all tokens in the pool
     * @param self Swap struct to read from
     * @return the pool balances "scaled" to the pool's precision, allowing
     * them to be more easily compared.
     */
    function _xp(SwapUtils.Swap storage self, uint256 baseVirtualPrice)
        internal
        view
        returns (uint256[] memory)
    {
        return
            _xp(
                self.balances,
                self.tokenPrecisionMultipliers,
                baseVirtualPrice
            );
    }

    /**
     * @notice Get the virtual price, to help calculate profit
     * @param self Swap struct to read from
     * @param metaSwapStorage MetaSwap struct to read from
     * @return the virtual price, scaled to precision of BASE_VIRTUAL_PRICE_PRECISION
     */
    function getVirtualPrice(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage
    ) external view returns (uint256) {
        uint256 d = SwapUtils.getD(
            _xp(
                self.balances,
                self.tokenPrecisionMultipliers,
                _getBaseVirtualPrice(metaSwapStorage)
            ),
            self._getAPrecise()
        );
        uint256 supply = self.lpToken.totalSupply();
        if (supply != 0) {
            return d.mul(BASE_VIRTUAL_PRICE_PRECISION).div(supply);
        }
        return 0;
    }

    /**
     * @notice Externally calculates a swap between two tokens. The SwapUtils.Swap storage and
     * MetaSwap storage should be from the same MetaSwap contract.
     * @param self Swap struct to read from
     * @param metaSwapStorage MetaSwap struct from the same contract
     * @param tokenIndexFrom the token to sell
     * @param tokenIndexTo the token to buy
     * @param dx the number of tokens to sell. If the token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @return dy the number of tokens the user will get
     */
    function calculateSwap(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256 dy) {
        (dy, ) = _calculateSwap(
            self,
            tokenIndexFrom,
            tokenIndexTo,
            dx,
            _getBaseVirtualPrice(metaSwapStorage)
        );
    }

    /**
     * @notice Internally calculates a swap between two tokens.
     *
     * @dev The caller is expected to transfer the actual amounts (dx and dy)
     * using the token contracts.
     *
     * @param self Swap struct to read from
     * @param tokenIndexFrom the token to sell
     * @param tokenIndexTo the token to buy
     * @param dx the number of tokens to sell. If the token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param baseVirtualPrice the virtual price of the base LP token
     * @return dy the number of tokens the user will get and dyFee the associated fee
     */
    function _calculateSwap(
        SwapUtils.Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 baseVirtualPrice
    ) internal view returns (uint256 dy, uint256 dyFee) {
        uint256[] memory xp = _xp(self, baseVirtualPrice);
        require(
            tokenIndexFrom < xp.length && tokenIndexTo < xp.length,
            "Token index out of range"
        );
        uint256 x = dx.mul(self.tokenPrecisionMultipliers[tokenIndexFrom]).add(
            xp[tokenIndexFrom]
        );
        uint256 y = SwapUtils.getY(
            self._getAPrecise(),
            tokenIndexFrom,
            tokenIndexTo,
            x,
            xp
        );
        dy = xp[tokenIndexTo].sub(y).sub(1);
        dyFee = dy.mul(self.swapFee).div(FEE_DENOMINATOR);
        dy = dy.sub(dyFee).div(self.tokenPrecisionMultipliers[tokenIndexTo]);
    }

    /**
     * @notice Calculates the expected return amount from swapping between
     * the pooled tokens and the underlying tokens of the base Swap pool.
     *
     * @param self Swap struct to read from
     * @param metaSwapStorage MetaSwap struct from the same contract
     * @param tokenIndexFrom the token to sell
     * @param tokenIndexTo the token to buy
     * @param dx the number of tokens to sell. If the token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @return dy the number of tokens the user will get
     */
    function calculateSwapUnderlying(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256) {
        CalculateSwapUnderlyingInfo memory v = CalculateSwapUnderlyingInfo(
            _getBaseVirtualPrice(metaSwapStorage),
            metaSwapStorage.baseSwap,
            0,
            uint8(metaSwapStorage.baseTokens.length),
            0,
            0,
            0
        );

        uint256[] memory xp = _xp(self, v.baseVirtualPrice);
        v.baseLPTokenIndex = uint8(xp.length.sub(1));
        {
            uint8 maxRange = v.baseLPTokenIndex + v.baseTokensLength;
            require(
                tokenIndexFrom < maxRange && tokenIndexTo < maxRange,
                "Token index out of range"
            );
        }

        if (tokenIndexFrom < v.baseLPTokenIndex) {
            // tokenFrom is from this pool
            v.x = xp[tokenIndexFrom].add(
                dx.mul(self.tokenPrecisionMultipliers[tokenIndexFrom])
            );
        } else {
            // tokenFrom is from the base pool
            tokenIndexFrom = tokenIndexFrom - v.baseLPTokenIndex;
            if (tokenIndexTo < v.baseLPTokenIndex) {
                uint256[] memory baseInputs = new uint256[](v.baseTokensLength);
                baseInputs[tokenIndexFrom] = dx;
                v.x = v
                    .baseSwap
                    .calculateTokenAmount(baseInputs, true)
                    .mul(v.baseVirtualPrice)
                    .div(BASE_VIRTUAL_PRICE_PRECISION)
                    .add(xp[v.baseLPTokenIndex]);
            } else {
                // both from and to are from the base pool
                return
                    v.baseSwap.calculateSwap(
                        tokenIndexFrom,
                        tokenIndexTo - v.baseLPTokenIndex,
                        dx
                    );
            }
            tokenIndexFrom = v.baseLPTokenIndex;
        }

        v.metaIndexTo = v.baseLPTokenIndex;
        if (tokenIndexTo < v.baseLPTokenIndex) {
            v.metaIndexTo = tokenIndexTo;
        }

        {
            uint256 y = SwapUtils.getY(
                self._getAPrecise(),
                tokenIndexFrom,
                v.metaIndexTo,
                v.x,
                xp
            );
            v.dy = xp[v.metaIndexTo].sub(y).sub(1);
            uint256 dyFee = v.dy.mul(self.swapFee).div(FEE_DENOMINATOR);
            v.dy = v.dy.sub(dyFee);
        }

        if (tokenIndexTo < v.baseLPTokenIndex) {
            // tokenTo is from this pool
            v.dy = v.dy.div(self.tokenPrecisionMultipliers[v.metaIndexTo]);
        } else {
            // tokenTo is from the base pool
            v.dy = v.baseSwap.calculateRemoveLiquidityOneToken(
                v.dy.mul(BASE_VIRTUAL_PRICE_PRECISION).div(v.baseVirtualPrice),
                tokenIndexTo - v.baseLPTokenIndex
            );
        }

        return v.dy;
    }

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param self Swap struct to read from
     * @param metaSwapStorage MetaSwap struct to read from
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return if deposit was true, total amount of lp token that will be minted and if
     * deposit was false, total amount of lp token that will be burned
     */
    function calculateTokenAmount(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage,
        uint256[] calldata amounts,
        bool deposit
    ) external view returns (uint256) {
        uint256 a = self._getAPrecise();
        uint256 d0;
        uint256 d1;
        {
            uint256 baseVirtualPrice = _getBaseVirtualPrice(metaSwapStorage);
            uint256[] memory balances1 = self.balances;
            uint256[] memory tokenPrecisionMultipliers = self
                .tokenPrecisionMultipliers;
            uint256 numTokens = balances1.length;
            d0 = SwapUtils.getD(
                _xp(balances1, tokenPrecisionMultipliers, baseVirtualPrice),
                a
            );
            for (uint256 i = 0; i < numTokens; i++) {
                if (deposit) {
                    balances1[i] = balances1[i].add(amounts[i]);
                } else {
                    balances1[i] = balances1[i].sub(
                        amounts[i],
                        "Cannot withdraw more than available"
                    );
                }
            }
            d1 = SwapUtils.getD(
                _xp(balances1, tokenPrecisionMultipliers, baseVirtualPrice),
                a
            );
        }
        uint256 totalSupply = self.lpToken.totalSupply();

        if (deposit) {
            return d1.sub(d0).mul(totalSupply).div(d0);
        } else {
            return d0.sub(d1).mul(totalSupply).div(d0);
        }
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice swap two tokens in the pool
     * @param self Swap struct to read from and write to
     * @param metaSwapStorage MetaSwap struct to read from and write to
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell
     * @param minDy the min amount the user would like to receive, or revert.
     * @return amount of token user received on swap
     */
    function swap(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy
    ) external returns (uint256) {
        {
            uint256 pooledTokensLength = self.pooledTokens.length;
            require(
                tokenIndexFrom < pooledTokensLength &&
                    tokenIndexTo < pooledTokensLength,
                "Token index is out of range"
            );
        }

        uint256 transferredDx;
        {
            IERC20 tokenFrom = self.pooledTokens[tokenIndexFrom];
            require(
                dx <= tokenFrom.balanceOf(msg.sender),
                "Cannot swap more than you own"
            );

            {
                // Transfer tokens first to see if a fee was charged on transfer
                uint256 beforeBalance = tokenFrom.balanceOf(address(this));
                tokenFrom.safeTransferFrom(msg.sender, address(this), dx);

                // Use the actual transferred amount for AMM math
                transferredDx = tokenFrom.balanceOf(address(this)).sub(
                    beforeBalance
                );
            }
        }

        (uint256 dy, uint256 dyFee) = _calculateSwap(
            self,
            tokenIndexFrom,
            tokenIndexTo,
            transferredDx,
            _updateBaseVirtualPrice(metaSwapStorage)
        );
        require(dy >= minDy, "Swap didn't result in min tokens");

        uint256 dyAdminFee = dyFee.mul(self.adminFee).div(FEE_DENOMINATOR).div(
            self.tokenPrecisionMultipliers[tokenIndexTo]
        );

        self.balances[tokenIndexFrom] = self.balances[tokenIndexFrom].add(
            transferredDx
        );
        self.balances[tokenIndexTo] = self.balances[tokenIndexTo].sub(dy).sub(
            dyAdminFee
        );

        self.pooledTokens[tokenIndexTo].safeTransfer(msg.sender, dy);

        emit TokenSwap(
            msg.sender,
            transferredDx,
            dy,
            tokenIndexFrom,
            tokenIndexTo
        );

        return dy;
    }

    /**
     * @notice Swaps with the underlying tokens of the base Swap pool. For this function,
     * the token indices are flattened out so that underlying tokens are represented
     * in the indices.
     * @dev Since this calls multiple external functions during the execution,
     * it is recommended to protect any function that depends on this with reentrancy guards.
     * @param self Swap struct to read from and write to
     * @param metaSwapStorage MetaSwap struct to read from and write to
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell
     * @param minDy the min amount the user would like to receive, or revert.
     * @return amount of token user received on swap
     */
    function swapUnderlying(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy
    ) external returns (uint256) {
        SwapUnderlyingInfo memory v = SwapUnderlyingInfo(
            0,
            0,
            0,
            self.tokenPrecisionMultipliers,
            self.balances,
            metaSwapStorage.baseTokens,
            IERC20(address(0)),
            0,
            IERC20(address(0)),
            0,
            _updateBaseVirtualPrice(metaSwapStorage)
        );

        uint8 baseLPTokenIndex = uint8(v.oldBalances.length.sub(1));

        {
            uint8 maxRange = uint8(baseLPTokenIndex + v.baseTokens.length);
            require(
                tokenIndexFrom < maxRange && tokenIndexTo < maxRange,
                "Token index out of range"
            );
        }

        ISwap baseSwap = metaSwapStorage.baseSwap;

        // Find the address of the token swapping from and the index in MetaSwap's token list
        if (tokenIndexFrom < baseLPTokenIndex) {
            v.tokenFrom = self.pooledTokens[tokenIndexFrom];
            v.metaIndexFrom = tokenIndexFrom;
        } else {
            v.tokenFrom = v.baseTokens[tokenIndexFrom - baseLPTokenIndex];
            v.metaIndexFrom = baseLPTokenIndex;
        }

        // Find the address of the token swapping to and the index in MetaSwap's token list
        if (tokenIndexTo < baseLPTokenIndex) {
            v.tokenTo = self.pooledTokens[tokenIndexTo];
            v.metaIndexTo = tokenIndexTo;
        } else {
            v.tokenTo = v.baseTokens[tokenIndexTo - baseLPTokenIndex];
            v.metaIndexTo = baseLPTokenIndex;
        }

        // Check for possible fee on transfer
        v.dx = v.tokenFrom.balanceOf(address(this));
        v.tokenFrom.safeTransferFrom(msg.sender, address(this), dx);
        v.dx = v.tokenFrom.balanceOf(address(this)).sub(v.dx); // update dx in case of fee on transfer

        if (
            tokenIndexFrom < baseLPTokenIndex || tokenIndexTo < baseLPTokenIndex
        ) {
            // Either one of the tokens belongs to the MetaSwap tokens list
            uint256[] memory xp = _xp(
                v.oldBalances,
                v.tokenPrecisionMultipliers,
                v.baseVirtualPrice
            );

            if (tokenIndexFrom < baseLPTokenIndex) {
                // Swapping from a MetaSwap token
                v.x = xp[tokenIndexFrom].add(
                    dx.mul(v.tokenPrecisionMultipliers[tokenIndexFrom])
                );
            } else {
                // Swapping from a base Swap token
                // This case requires adding the underlying token to the base Swap, then
                // using the base LP token to swap to the desired token
                uint256[] memory baseAmounts = new uint256[](
                    v.baseTokens.length
                );
                baseAmounts[tokenIndexFrom - baseLPTokenIndex] = v.dx;

                // Add liquidity to the underlying Swap contract and receive base LP token
                v.dx = baseSwap.addLiquidity(baseAmounts, 0, block.timestamp);

                // Calculate the value of total amount of baseLPToken we end up with
                v.x = v
                    .dx
                    .mul(v.baseVirtualPrice)
                    .div(BASE_VIRTUAL_PRICE_PRECISION)
                    .add(xp[baseLPTokenIndex]);
            }

            // Calculate how much to withdraw in MetaSwap level and the the associated swap fee
            uint256 dyFee;
            {
                uint256 y = SwapUtils.getY(
                    self._getAPrecise(),
                    v.metaIndexFrom,
                    v.metaIndexTo,
                    v.x,
                    xp
                );
                v.dy = xp[v.metaIndexTo].sub(y).sub(1);
                dyFee = v.dy.mul(self.swapFee).div(FEE_DENOMINATOR);
                v.dy = v.dy.sub(dyFee).div(
                    v.tokenPrecisionMultipliers[v.metaIndexTo]
                );
            }

            if (tokenIndexTo >= baseLPTokenIndex) {
                // When swapping to a base Swap token, scale down dy by its virtual price
                v.dy = v.dy.mul(BASE_VIRTUAL_PRICE_PRECISION).div(
                    v.baseVirtualPrice
                );
            }

            // Update the balances array according to the calculated input and output amount
            {
                uint256 dyAdminFee = dyFee.mul(self.adminFee).div(
                    FEE_DENOMINATOR
                );
                dyAdminFee = dyAdminFee.div(
                    v.tokenPrecisionMultipliers[v.metaIndexTo]
                );
                self.balances[v.metaIndexFrom] = v
                    .oldBalances[v.metaIndexFrom]
                    .add(v.dx);
                self.balances[v.metaIndexTo] = v
                    .oldBalances[v.metaIndexTo]
                    .sub(v.dy)
                    .sub(dyAdminFee);
            }

            if (tokenIndexTo >= baseLPTokenIndex) {
                // When swapping to a token that belongs to the base Swap, burn the LP token
                // and withdraw the desired token from the base pool
                uint256 oldBalance = v.tokenTo.balanceOf(address(this));
                baseSwap.removeLiquidityOneToken(
                    v.dy,
                    tokenIndexTo - baseLPTokenIndex,
                    0,
                    block.timestamp
                );
                v.dy = v.tokenTo.balanceOf(address(this)) - oldBalance;
            }

            // Check the amount of token to send meets minDy
            require(v.dy >= minDy, "Swap didn't result in min tokens");
        } else {
            // Both tokens are from the base Swap pool
            // Do a swap through the base Swap
            v.dy = v.tokenTo.balanceOf(address(this));
            baseSwap.swap(
                tokenIndexFrom - baseLPTokenIndex,
                tokenIndexTo - baseLPTokenIndex,
                v.dx,
                minDy,
                block.timestamp
            );
            v.dy = v.tokenTo.balanceOf(address(this)).sub(v.dy);
        }

        // Send the desired token to the caller
        v.tokenTo.safeTransfer(msg.sender, v.dy);

        emit TokenSwapUnderlying(
            msg.sender,
            dx,
            v.dy,
            tokenIndexFrom,
            tokenIndexTo
        );

        return v.dy;
    }

    /**
     * @notice Add liquidity to the pool
     * @param self Swap struct to read from and write to
     * @param metaSwapStorage MetaSwap struct to read from and write to
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * allowed addresses. If the pool is not in the guarded launch phase, this parameter will be ignored.
     * @return amount of LP token user received
     */
    function addLiquidity(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage,
        uint256[] memory amounts,
        uint256 minToMint
    ) external returns (uint256) {
        IERC20[] memory pooledTokens = self.pooledTokens;
        require(
            amounts.length == pooledTokens.length,
            "Amounts must match pooled tokens"
        );

        uint256[] memory fees = new uint256[](pooledTokens.length);

        // current state
        ManageLiquidityInfo memory v = ManageLiquidityInfo(
            0,
            0,
            0,
            self.lpToken,
            0,
            self._getAPrecise(),
            _updateBaseVirtualPrice(metaSwapStorage),
            self.tokenPrecisionMultipliers,
            self.balances
        );
        v.totalSupply = v.lpToken.totalSupply();

        if (v.totalSupply != 0) {
            v.d0 = SwapUtils.getD(
                _xp(
                    v.newBalances,
                    v.tokenPrecisionMultipliers,
                    v.baseVirtualPrice
                ),
                v.preciseA
            );
        }

        for (uint256 i = 0; i < pooledTokens.length; i++) {
            require(
                v.totalSupply != 0 || amounts[i] > 0,
                "Must supply all tokens in pool"
            );

            // Transfer tokens first to see if a fee was charged on transfer
            if (amounts[i] != 0) {
                uint256 beforeBalance = pooledTokens[i].balanceOf(
                    address(this)
                );
                pooledTokens[i].safeTransferFrom(
                    msg.sender,
                    address(this),
                    amounts[i]
                );

                // Update the amounts[] with actual transfer amount
                amounts[i] = pooledTokens[i].balanceOf(address(this)).sub(
                    beforeBalance
                );
            }

            v.newBalances[i] = v.newBalances[i].add(amounts[i]);
        }

        // invariant after change
        v.d1 = SwapUtils.getD(
            _xp(v.newBalances, v.tokenPrecisionMultipliers, v.baseVirtualPrice),
            v.preciseA
        );
        require(v.d1 > v.d0, "D should increase");

        // updated to reflect fees and calculate the user's LP tokens
        v.d2 = v.d1;
        uint256 toMint;

        if (v.totalSupply != 0) {
            uint256 feePerToken = SwapUtils._feePerToken(
                self.swapFee,
                pooledTokens.length
            );
            for (uint256 i = 0; i < pooledTokens.length; i++) {
                uint256 idealBalance = v.d1.mul(self.balances[i]).div(v.d0);
                fees[i] = feePerToken
                    .mul(idealBalance.difference(v.newBalances[i]))
                    .div(FEE_DENOMINATOR);
                self.balances[i] = v.newBalances[i].sub(
                    fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)
                );
                v.newBalances[i] = v.newBalances[i].sub(fees[i]);
            }
            v.d2 = SwapUtils.getD(
                _xp(
                    v.newBalances,
                    v.tokenPrecisionMultipliers,
                    v.baseVirtualPrice
                ),
                v.preciseA
            );
            toMint = v.d2.sub(v.d0).mul(v.totalSupply).div(v.d0);
        } else {
            // the initial depositor doesn't pay fees
            self.balances = v.newBalances;
            toMint = v.d1;
        }

        require(toMint >= minToMint, "Couldn't mint min requested");

        // mint the user's LP tokens
        self.lpToken.mint(msg.sender, toMint);

        emit AddLiquidity(
            msg.sender,
            amounts,
            fees,
            v.d1,
            v.totalSupply.add(toMint)
        );

        return toMint;
    }

    /**
     * @notice Remove liquidity from the pool all in one token.
     * @param self Swap struct to read from and write to
     * @param metaSwapStorage MetaSwap struct to read from and write to
     * @param tokenAmount the amount of the lp tokens to burn
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @return amount chosen token that user received
     */
    function removeLiquidityOneToken(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage,
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount
    ) external returns (uint256) {
        LPToken lpToken = self.lpToken;
        uint256 totalSupply = lpToken.totalSupply();
        uint256 numTokens = self.pooledTokens.length;
        require(tokenAmount <= lpToken.balanceOf(msg.sender), ">LP.balanceOf");
        require(tokenIndex < numTokens, "Token not found");

        uint256 dyFee;
        uint256 dy;

        (dy, dyFee) = _calculateWithdrawOneToken(
            self,
            tokenAmount,
            tokenIndex,
            _updateBaseVirtualPrice(metaSwapStorage),
            totalSupply
        );

        require(dy >= minAmount, "dy < minAmount");

        // Update balances array
        self.balances[tokenIndex] = self.balances[tokenIndex].sub(
            dy.add(dyFee.mul(self.adminFee).div(FEE_DENOMINATOR))
        );

        // Burn the associated LP token from the caller and send the desired token
        lpToken.burnFrom(msg.sender, tokenAmount);
        self.pooledTokens[tokenIndex].safeTransfer(msg.sender, dy);

        emit RemoveLiquidityOne(
            msg.sender,
            tokenAmount,
            totalSupply,
            tokenIndex,
            dy
        );

        return dy;
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances.
     *
     * @param self Swap struct to read from and write to
     * @param metaSwapStorage MetaSwap struct to read from and write to
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @return actual amount of LP tokens burned in the withdrawal
     */
    function removeLiquidityImbalance(
        SwapUtils.Swap storage self,
        MetaSwap storage metaSwapStorage,
        uint256[] memory amounts,
        uint256 maxBurnAmount
    ) public returns (uint256) {
        // Using this struct to avoid stack too deep error
        ManageLiquidityInfo memory v = ManageLiquidityInfo(
            0,
            0,
            0,
            self.lpToken,
            0,
            self._getAPrecise(),
            _updateBaseVirtualPrice(metaSwapStorage),
            self.tokenPrecisionMultipliers,
            self.balances
        );
        v.totalSupply = v.lpToken.totalSupply();

        require(
            amounts.length == v.newBalances.length,
            "Amounts should match pool tokens"
        );
        require(maxBurnAmount != 0, "Must burn more than 0");

        uint256 feePerToken = SwapUtils._feePerToken(
            self.swapFee,
            v.newBalances.length
        );

        // Calculate how much LPToken should be burned
        uint256[] memory fees = new uint256[](v.newBalances.length);
        {
            uint256[] memory balances1 = new uint256[](v.newBalances.length);

            v.d0 = SwapUtils.getD(
                _xp(
                    v.newBalances,
                    v.tokenPrecisionMultipliers,
                    v.baseVirtualPrice
                ),
                v.preciseA
            );
            for (uint256 i = 0; i < v.newBalances.length; i++) {
                balances1[i] = v.newBalances[i].sub(
                    amounts[i],
                    "Cannot withdraw more than available"
                );
            }
            v.d1 = SwapUtils.getD(
                _xp(balances1, v.tokenPrecisionMultipliers, v.baseVirtualPrice),
                v.preciseA
            );

            for (uint256 i = 0; i < v.newBalances.length; i++) {
                uint256 idealBalance = v.d1.mul(v.newBalances[i]).div(v.d0);
                uint256 difference = idealBalance.difference(balances1[i]);
                fees[i] = feePerToken.mul(difference).div(FEE_DENOMINATOR);
                self.balances[i] = balances1[i].sub(
                    fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)
                );
                balances1[i] = balances1[i].sub(fees[i]);
            }

            v.d2 = SwapUtils.getD(
                _xp(balances1, v.tokenPrecisionMultipliers, v.baseVirtualPrice),
                v.preciseA
            );
        }

        uint256 tokenAmount = v.d0.sub(v.d2).mul(v.totalSupply).div(v.d0);
        require(tokenAmount != 0, "Burnt amount cannot be zero");

        // Scale up by withdraw fee
        tokenAmount = tokenAmount.add(1);

        // Check for max burn amount
        require(tokenAmount <= maxBurnAmount, "tokenAmount > maxBurnAmount");

        // Burn the calculated amount of LPToken from the caller and send the desired tokens
        v.lpToken.burnFrom(msg.sender, tokenAmount);
        for (uint256 i = 0; i < v.newBalances.length; i++) {
            self.pooledTokens[i].safeTransfer(msg.sender, amounts[i]);
        }

        emit RemoveLiquidityImbalance(
            msg.sender,
            amounts,
            fees,
            v.d1,
            v.totalSupply.sub(tokenAmount)
        );

        return tokenAmount;
    }

    /**
     * @notice Determines if the stored value of base Swap's virtual price is expired.
     * If the last update was past the BASE_CACHE_EXPIRE_TIME, then update the stored value.
     *
     * @param metaSwapStorage MetaSwap struct to read from and write to
     * @return base Swap's virtual price
     */
    function _updateBaseVirtualPrice(MetaSwap storage metaSwapStorage)
        internal
        returns (uint256)
    {
        if (
            block.timestamp >
            metaSwapStorage.baseCacheLastUpdated + BASE_CACHE_EXPIRE_TIME
        ) {
            // When the cache is expired, update it
            uint256 baseVirtualPrice = ISwap(metaSwapStorage.baseSwap)
                .getVirtualPrice();
            metaSwapStorage.baseVirtualPrice = baseVirtualPrice;
            metaSwapStorage.baseCacheLastUpdated = block.timestamp;
            return baseVirtualPrice;
        } else {
            return metaSwapStorage.baseVirtualPrice;
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts-upgradeable/proxy/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/utils/ReentrancyGuardUpgradeable.sol";
import "../LPToken.sol";
import "../interfaces/ISwap.sol";
import "../interfaces/IMetaSwap.sol";

/**
 * @title MetaSwapDeposit
 * @notice This contract flattens the LP token in a MetaSwap pool for easier user access. MetaSwap must be
 * deployed before this contract can be initialized successfully.
 *
 * For example, suppose there exists a base Swap pool consisting of [DAI, USDC, USDT].
 * Then a MetaSwap pool can be created with [sUSD, BaseSwapLPToken] to allow trades between either
 * the LP token or the underlying tokens and sUSD.
 *
 * MetaSwapDeposit flattens the LP token and remaps them to a single array, allowing users
 * to ignore the dependency on BaseSwapLPToken. Using the above example, MetaSwapDeposit can act
 * as a Swap containing [sUSD, DAI, USDC, USDT] tokens.
 */
contract MetaSwapDeposit is Initializable, ReentrancyGuardUpgradeable {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;

    ISwap public baseSwap;
    IMetaSwap public metaSwap;
    IERC20[] public baseTokens;
    IERC20[] public metaTokens;
    IERC20[] public tokens;
    IERC20 public metaLPToken;

    uint256 constant MAX_UINT256 = 2**256 - 1;

    struct RemoveLiquidityImbalanceInfo {
        ISwap baseSwap;
        IMetaSwap metaSwap;
        IERC20 metaLPToken;
        uint8 baseLPTokenIndex;
        bool withdrawFromBase;
        uint256 leftoverMetaLPTokenAmount;
    }

    /**
     * @notice Sets the address for the base Swap contract, MetaSwap contract, and the
     * MetaSwap LP token contract.
     * @param _baseSwap the address of the base Swap contract
     * @param _metaSwap the address of the MetaSwap contract
     * @param _metaLPToken the address of the MetaSwap LP token contract
     */
    function initialize(
        ISwap _baseSwap,
        IMetaSwap _metaSwap,
        IERC20 _metaLPToken
    ) external initializer {
        __ReentrancyGuard_init();
        // Check and approve base level tokens to be deposited to the base Swap contract
        {
            uint8 i;
            for (; i < 32; i++) {
                try _baseSwap.getToken(i) returns (IERC20 token) {
                    baseTokens.push(token);
                    token.safeApprove(address(_baseSwap), MAX_UINT256);
                    token.safeApprove(address(_metaSwap), MAX_UINT256);
                } catch {
                    break;
                }
            }
            require(i > 1, "baseSwap must have at least 2 tokens");
        }

        // Check and approve meta level tokens to be deposited to the MetaSwap contract
        IERC20 baseLPToken;
        {
            uint8 i;
            for (; i < 32; i++) {
                try _metaSwap.getToken(i) returns (IERC20 token) {
                    baseLPToken = token;
                    metaTokens.push(token);
                    tokens.push(token);
                    token.safeApprove(address(_metaSwap), MAX_UINT256);
                } catch {
                    break;
                }
            }
            require(i > 1, "metaSwap must have at least 2 tokens");
        }

        // Flatten baseTokens and append it to tokens array
        tokens[tokens.length - 1] = baseTokens[0];
        for (uint8 i = 1; i < baseTokens.length; i++) {
            tokens.push(baseTokens[i]);
        }

        // Approve base Swap LP token to be burned by the base Swap contract for withdrawing
        baseLPToken.safeApprove(address(_baseSwap), MAX_UINT256);
        // Approve MetaSwap LP token to be burned by the MetaSwap contract for withdrawing
        _metaLPToken.safeApprove(address(_metaSwap), MAX_UINT256);

        // Initialize storage variables
        baseSwap = _baseSwap;
        metaSwap = _metaSwap;
        metaLPToken = _metaLPToken;
    }

    // Mutative functions

    /**
     * @notice Swap two underlying tokens using the meta pool and the base pool
     * @param tokenIndexFrom the token the user wants to swap from
     * @param tokenIndexTo the token the user wants to swap to
     * @param dx the amount of tokens the user wants to swap from
     * @param minDy the min amount the user would like to receive, or revert.
     * @param deadline latest timestamp to accept this transaction
     */
    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external nonReentrant returns (uint256) {
        tokens[tokenIndexFrom].safeTransferFrom(msg.sender, address(this), dx);
        uint256 tokenToAmount = metaSwap.swapUnderlying(
            tokenIndexFrom,
            tokenIndexTo,
            dx,
            minDy,
            deadline
        );
        tokens[tokenIndexTo].safeTransfer(msg.sender, tokenToAmount);
        return tokenToAmount;
    }

    /**
     * @notice Add liquidity to the pool with the given amounts of tokens
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP token user minted and received
     */
    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    ) external nonReentrant returns (uint256) {
        // Read to memory to save on gas
        IERC20[] memory memBaseTokens = baseTokens;
        IERC20[] memory memMetaTokens = metaTokens;
        uint256 baseLPTokenIndex = memMetaTokens.length - 1;

        require(amounts.length == memBaseTokens.length + baseLPTokenIndex);

        uint256 baseLPTokenAmount;
        {
            // Transfer base tokens from the caller and deposit to the base Swap pool
            uint256[] memory baseAmounts = new uint256[](memBaseTokens.length);
            bool shouldDepositBaseTokens;
            for (uint8 i = 0; i < memBaseTokens.length; i++) {
                IERC20 token = memBaseTokens[i];
                uint256 depositAmount = amounts[baseLPTokenIndex + i];
                if (depositAmount > 0) {
                    token.safeTransferFrom(
                        msg.sender,
                        address(this),
                        depositAmount
                    );
                    baseAmounts[i] = token.balanceOf(address(this)); // account for any fees on transfer
                    // if there are any base Swap level tokens, flag it for deposits
                    shouldDepositBaseTokens = true;
                }
            }
            if (shouldDepositBaseTokens) {
                // Deposit any base Swap level tokens and receive baseLPToken
                baseLPTokenAmount = baseSwap.addLiquidity(
                    baseAmounts,
                    0,
                    deadline
                );
            }
        }

        uint256 metaLPTokenAmount;
        {
            // Transfer remaining meta level tokens from the caller
            uint256[] memory metaAmounts = new uint256[](metaTokens.length);
            for (uint8 i = 0; i < baseLPTokenIndex; i++) {
                IERC20 token = memMetaTokens[i];
                uint256 depositAmount = amounts[i];
                if (depositAmount > 0) {
                    token.safeTransferFrom(
                        msg.sender,
                        address(this),
                        depositAmount
                    );
                    metaAmounts[i] = token.balanceOf(address(this)); // account for any fees on transfer
                }
            }
            // Update the baseLPToken amount that will be deposited
            metaAmounts[baseLPTokenIndex] = baseLPTokenAmount;

            // Deposit the meta level tokens and the baseLPToken
            metaLPTokenAmount = metaSwap.addLiquidity(
                metaAmounts,
                minToMint,
                deadline
            );
        }

        // Transfer the meta lp token to the caller
        metaLPToken.safeTransfer(msg.sender, metaLPTokenAmount);

        return metaLPTokenAmount;
    }

    /**
     * @notice Burn LP tokens to remove liquidity from the pool. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @dev Liquidity can always be removed, even when the pool is paused.
     * @param amount the amount of LP tokens to burn
     * @param minAmounts the minimum amounts of each token in the pool
     *        acceptable for this burn. Useful as a front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amounts of tokens user received
     */
    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external nonReentrant returns (uint256[] memory) {
        IERC20[] memory memBaseTokens = baseTokens;
        IERC20[] memory memMetaTokens = metaTokens;
        uint256[] memory totalRemovedAmounts;

        {
            uint256 numOfAllTokens = memBaseTokens.length +
                memMetaTokens.length -
                1;
            require(minAmounts.length == numOfAllTokens, "out of range");
            totalRemovedAmounts = new uint256[](numOfAllTokens);
        }

        // Transfer meta lp token from the caller to this
        metaLPToken.safeTransferFrom(msg.sender, address(this), amount);

        uint256 baseLPTokenAmount;
        {
            // Remove liquidity from the MetaSwap pool
            uint256[] memory removedAmounts;
            uint256 baseLPTokenIndex = memMetaTokens.length - 1;
            {
                uint256[] memory metaMinAmounts = new uint256[](
                    memMetaTokens.length
                );
                for (uint8 i = 0; i < baseLPTokenIndex; i++) {
                    metaMinAmounts[i] = minAmounts[i];
                }
                removedAmounts = metaSwap.removeLiquidity(
                    amount,
                    metaMinAmounts,
                    deadline
                );
            }

            // Send the meta level tokens to the caller
            for (uint8 i = 0; i < baseLPTokenIndex; i++) {
                totalRemovedAmounts[i] = removedAmounts[i];
                memMetaTokens[i].safeTransfer(msg.sender, removedAmounts[i]);
            }
            baseLPTokenAmount = removedAmounts[baseLPTokenIndex];

            // Remove liquidity from the base Swap pool
            {
                uint256[] memory baseMinAmounts = new uint256[](
                    memBaseTokens.length
                );
                for (uint8 i = 0; i < baseLPTokenIndex; i++) {
                    baseMinAmounts[i] = minAmounts[baseLPTokenIndex + i];
                }
                removedAmounts = baseSwap.removeLiquidity(
                    baseLPTokenAmount,
                    baseMinAmounts,
                    deadline
                );
            }

            // Send the base level tokens to the caller
            for (uint8 i = 0; i < memBaseTokens.length; i++) {
                totalRemovedAmounts[baseLPTokenIndex + i] = removedAmounts[i];
                memBaseTokens[i].safeTransfer(msg.sender, removedAmounts[i]);
            }
        }

        return totalRemovedAmounts;
    }

    /**
     * @notice Remove liquidity from the pool all in one token. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param tokenAmount the amount of the token you want to receive
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @param deadline latest timestamp to accept this transaction
     * @return amount of chosen token user received
     */
    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external nonReentrant returns (uint256) {
        uint8 baseLPTokenIndex = uint8(metaTokens.length - 1);
        uint8 baseTokensLength = uint8(baseTokens.length);

        // Transfer metaLPToken from the caller
        metaLPToken.safeTransferFrom(msg.sender, address(this), tokenAmount);

        IERC20 token;
        if (tokenIndex < baseLPTokenIndex) {
            // When the desired token is meta level token, we can just call `removeLiquidityOneToken` directly
            metaSwap.removeLiquidityOneToken(
                tokenAmount,
                tokenIndex,
                minAmount,
                deadline
            );
            token = metaTokens[tokenIndex];
        } else if (tokenIndex < baseLPTokenIndex + baseTokensLength) {
            // When the desired token is a base level token, we need to first withdraw via baseLPToken, then withdraw
            // the desired token from the base Swap contract.
            uint256 removedBaseLPTokenAmount = metaSwap.removeLiquidityOneToken(
                tokenAmount,
                baseLPTokenIndex,
                0,
                deadline
            );

            baseSwap.removeLiquidityOneToken(
                removedBaseLPTokenAmount,
                tokenIndex - baseLPTokenIndex,
                minAmount,
                deadline
            );
            token = baseTokens[tokenIndex - baseLPTokenIndex];
        } else {
            revert("out of range");
        }

        uint256 amountWithdrawn = token.balanceOf(address(this));
        token.safeTransfer(msg.sender, amountWithdrawn);
        return amountWithdrawn;
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP tokens burned
     */
    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external nonReentrant returns (uint256) {
        IERC20[] memory memBaseTokens = baseTokens;
        IERC20[] memory memMetaTokens = metaTokens;
        uint256[] memory metaAmounts = new uint256[](memMetaTokens.length);
        uint256[] memory baseAmounts = new uint256[](memBaseTokens.length);

        require(
            amounts.length == memBaseTokens.length + memMetaTokens.length - 1,
            "out of range"
        );

        RemoveLiquidityImbalanceInfo memory v = RemoveLiquidityImbalanceInfo(
            baseSwap,
            metaSwap,
            metaLPToken,
            uint8(metaAmounts.length - 1),
            false,
            0
        );

        for (uint8 i = 0; i < v.baseLPTokenIndex; i++) {
            metaAmounts[i] = amounts[i];
        }

        for (uint8 i = 0; i < baseAmounts.length; i++) {
            baseAmounts[i] = amounts[v.baseLPTokenIndex + i];
            if (baseAmounts[i] > 0) {
                v.withdrawFromBase = true;
            }
        }

        // Calculate how much base LP token we need to get the desired amount of underlying tokens
        if (v.withdrawFromBase) {
            metaAmounts[v.baseLPTokenIndex] = v
                .baseSwap
                .calculateTokenAmount(baseAmounts, false)
                .mul(10005)
                .div(10000);
        }

        // Transfer MetaSwap LP token from the caller to this contract
        v.metaLPToken.safeTransferFrom(
            msg.sender,
            address(this),
            maxBurnAmount
        );

        // Withdraw the paired meta level tokens and the base LP token from the MetaSwap pool
        uint256 burnedMetaLPTokenAmount = v.metaSwap.removeLiquidityImbalance(
            metaAmounts,
            maxBurnAmount,
            deadline
        );
        v.leftoverMetaLPTokenAmount = maxBurnAmount.sub(
            burnedMetaLPTokenAmount
        );

        // If underlying tokens are desired, withdraw them from the base Swap pool
        if (v.withdrawFromBase) {
            v.baseSwap.removeLiquidityImbalance(
                baseAmounts,
                metaAmounts[v.baseLPTokenIndex],
                deadline
            );

            // Base Swap may require LESS base LP token than the amount we have
            // In that case, deposit it to the MetaSwap pool.
            uint256[] memory leftovers = new uint256[](metaAmounts.length);
            IERC20 baseLPToken = memMetaTokens[v.baseLPTokenIndex];
            uint256 leftoverBaseLPTokenAmount = baseLPToken.balanceOf(
                address(this)
            );
            if (leftoverBaseLPTokenAmount > 0) {
                leftovers[v.baseLPTokenIndex] = leftoverBaseLPTokenAmount;
                v.leftoverMetaLPTokenAmount = v.leftoverMetaLPTokenAmount.add(
                    v.metaSwap.addLiquidity(leftovers, 0, deadline)
                );
            }
        }

        // Transfer all withdrawn tokens to the caller
        for (uint8 i = 0; i < amounts.length; i++) {
            IERC20 token;
            if (i < v.baseLPTokenIndex) {
                token = memMetaTokens[i];
            } else {
                token = memBaseTokens[i - v.baseLPTokenIndex];
            }
            if (amounts[i] > 0) {
                token.safeTransfer(msg.sender, amounts[i]);
            }
        }

        // If there were any extra meta lp token, transfer them back to the caller as well
        if (v.leftoverMetaLPTokenAmount > 0) {
            v.metaLPToken.safeTransfer(msg.sender, v.leftoverMetaLPTokenAmount);
        }

        return maxBurnAmount - v.leftoverMetaLPTokenAmount;
    }

    // VIEW FUNCTIONS

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running. When withdrawing from the base pool in imbalanced
     * fashion, the recommended slippage setting is 0.2% or higher.
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return token amount the user will receive
     */
    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        returns (uint256)
    {
        uint256[] memory metaAmounts = new uint256[](metaTokens.length);
        uint256[] memory baseAmounts = new uint256[](baseTokens.length);
        uint256 baseLPTokenIndex = metaAmounts.length - 1;

        for (uint8 i = 0; i < baseLPTokenIndex; i++) {
            metaAmounts[i] = amounts[i];
        }

        for (uint8 i = 0; i < baseAmounts.length; i++) {
            baseAmounts[i] = amounts[baseLPTokenIndex + i];
        }

        uint256 baseLPTokenAmount = baseSwap.calculateTokenAmount(
            baseAmounts,
            deposit
        );
        metaAmounts[baseLPTokenIndex] = baseLPTokenAmount;

        return metaSwap.calculateTokenAmount(metaAmounts, deposit);
    }

    /**
     * @notice A simple method to calculate amount of each underlying
     * tokens that is returned upon burning given amount of LP tokens
     * @param amount the amount of LP tokens that would be burned on withdrawal
     * @return array of token balances that the user will receive
     */
    function calculateRemoveLiquidity(uint256 amount)
        external
        view
        returns (uint256[] memory)
    {
        uint256[] memory metaAmounts = metaSwap.calculateRemoveLiquidity(
            amount
        );
        uint8 baseLPTokenIndex = uint8(metaAmounts.length - 1);
        uint256[] memory baseAmounts = baseSwap.calculateRemoveLiquidity(
            metaAmounts[baseLPTokenIndex]
        );

        uint256[] memory totalAmounts = new uint256[](
            baseLPTokenIndex + baseAmounts.length
        );
        for (uint8 i = 0; i < baseLPTokenIndex; i++) {
            totalAmounts[i] = metaAmounts[i];
        }
        for (uint8 i = 0; i < baseAmounts.length; i++) {
            totalAmounts[baseLPTokenIndex + i] = baseAmounts[i];
        }

        return totalAmounts;
    }

    /**
     * @notice Calculate the amount of underlying token available to withdraw
     * when withdrawing via only single token
     * @param tokenAmount the amount of LP token to burn
     * @param tokenIndex index of which token will be withdrawn
     * @return availableTokenAmount calculated amount of underlying token
     * available to withdraw
     */
    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256) {
        uint8 baseLPTokenIndex = uint8(metaTokens.length - 1);

        if (tokenIndex < baseLPTokenIndex) {
            return
                metaSwap.calculateRemoveLiquidityOneToken(
                    tokenAmount,
                    tokenIndex
                );
        } else {
            uint256 baseLPTokenAmount = metaSwap
                .calculateRemoveLiquidityOneToken(
                    tokenAmount,
                    baseLPTokenIndex
                );
            return
                baseSwap.calculateRemoveLiquidityOneToken(
                    baseLPTokenAmount,
                    tokenIndex - baseLPTokenIndex
                );
        }
    }

    /**
     * @notice Returns the address of the pooled token at given index. Reverts if tokenIndex is out of range.
     * This is a flattened representation of the pooled tokens.
     * @param index the index of the token
     * @return address of the token at given index
     */
    function getToken(uint8 index) external view returns (IERC20) {
        require(index < tokens.length, "index out of range");
        return tokens[index];
    }

    /**
     * @notice Calculate amount of tokens you receive on swap
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell. If the token charges
     * a fee on transfers, use the amount that gets transferred after the fee.
     * @return amount of tokens the user will receive
     */
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256) {
        return
            metaSwap.calculateSwapUnderlying(tokenIndexFrom, tokenIndexTo, dx);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./ISwap.sol";

interface IMetaSwap {
    // pool data view functions
    function getA() external view returns (uint256);

    function getToken(uint8 index) external view returns (IERC20);

    function getTokenIndex(address tokenAddress) external view returns (uint8);

    function getTokenBalance(uint8 index) external view returns (uint256);

    function getVirtualPrice() external view returns (uint256);

    function isGuarded() external view returns (bool);

    // min return calculation functions
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256);

    function calculateSwapUnderlying(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256);

    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        returns (uint256);

    function calculateRemoveLiquidity(uint256 amount)
        external
        view
        returns (uint256[] memory);

    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256 availableTokenAmount);

    // state modifying functions
    function initialize(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress
    ) external;

    function initializeMetaSwap(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress,
        ISwap baseSwap
    ) external;

    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function swapUnderlying(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external returns (uint256[] memory);

    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/proxy/Clones.sol";
import "./interfaces/ISwap.sol";
import "./interfaces/IMetaSwap.sol";

contract SwapDeployer is Ownable {
    event NewSwapPool(
        address indexed deployer,
        address swapAddress,
        IERC20[] pooledTokens
    );
    event NewClone(address indexed target, address cloneAddress);

    constructor() public Ownable() {}

    function clone(address target) external returns (address) {
        address newClone = _clone(target);
        emit NewClone(target, newClone);

        return newClone;
    }

    function _clone(address target) internal returns (address) {
        return Clones.clone(target);
    }

    function deploy(
        address swapAddress,
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress
    ) external returns (address) {
        address swapClone = _clone(swapAddress);
        ISwap(swapClone).initialize(
            _pooledTokens,
            decimals,
            lpTokenName,
            lpTokenSymbol,
            _a,
            _fee,
            _adminFee,
            lpTokenTargetAddress
        );
        Ownable(swapClone).transferOwnership(owner());
        emit NewSwapPool(msg.sender, swapClone, _pooledTokens);
        return swapClone;
    }

    function deployMetaSwap(
        address metaSwapAddress,
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress,
        ISwap baseSwap
    ) external returns (address) {
        address metaSwapClone = _clone(metaSwapAddress);
        IMetaSwap(metaSwapClone).initializeMetaSwap(
            _pooledTokens,
            decimals,
            lpTokenName,
            lpTokenSymbol,
            _a,
            _fee,
            _adminFee,
            lpTokenTargetAddress,
            baseSwap
        );
        Ownable(metaSwapClone).transferOwnership(owner());
        emit NewSwapPool(msg.sender, metaSwapClone, _pooledTokens);
        return metaSwapClone;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "synthetix/contracts/interfaces/ISynthetix.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts-upgradeable/proxy/Initializable.sol";
import "../interfaces/ISwap.sol";

/**
 * @title SynthSwapper
 * @notice Replacement of Virtual Synths in favor of gas savings. Allows swapping synths via the Synthetix protocol
 * or Saddle's pools. The `Bridge.sol` contract will deploy minimal clones of this contract upon initiating
 * any cross-asset swaps.
 */
contract SynthSwapper is Initializable {
    using SafeERC20 for IERC20;

    address payable owner;
    // SYNTHETIX points to `ProxyERC20` (0xC011a73ee8576Fb46F5E1c5751cA3B9Fe0af2a6F).
    // This contract is a proxy of `Synthetix` and is used to exchange synths.
    ISynthetix public constant SYNTHETIX =
        ISynthetix(0xC011a73ee8576Fb46F5E1c5751cA3B9Fe0af2a6F);
    // "SADDLE" in bytes32 form
    bytes32 public constant TRACKING =
        0x534144444c450000000000000000000000000000000000000000000000000000;

    /**
     * @notice Initializes the contract when deploying this directly. This prevents
     * others from calling initialize() on the target contract and setting themself as the owner.
     */
    constructor() public {
        initialize();
    }

    /**
     * @notice This modifier checks if the caller is the owner
     */
    modifier onlyOwner() {
        require(msg.sender == owner, "is not owner");
        _;
    }

    /**
     * @notice Sets the `owner` as the caller of this function
     */
    function initialize() public initializer {
        require(owner == address(0), "owner already set");
        owner = msg.sender;
    }

    /**
     * @notice Swaps the synth to another synth via the Synthetix protocol.
     * @param sourceKey currency key of the source synth
     * @param synthAmount amount of the synth to swap
     * @param destKey currency key of the destination synth
     * @return amount of the destination synth received
     */
    function swapSynth(
        bytes32 sourceKey,
        uint256 synthAmount,
        bytes32 destKey
    ) external onlyOwner returns (uint256) {
        return
            SYNTHETIX.exchangeWithTracking(
                sourceKey,
                synthAmount,
                destKey,
                msg.sender,
                TRACKING
            );
    }

    /**
     * @notice Approves the given `tokenFrom` and swaps it to another token via the given `swap` pool.
     * @param swap the address of a pool to swap through
     * @param tokenFrom the address of the stored synth
     * @param tokenFromIndex the index of the token to swap from
     * @param tokenToIndex the token the user wants to swap to
     * @param tokenFromAmount the amount of the token to swap
     * @param minAmount the min amount the user would like to receive, or revert.
     * @param deadline latest timestamp to accept this transaction
     * @param recipient the address of the recipient
     */
    function swapSynthToToken(
        ISwap swap,
        IERC20 tokenFrom,
        uint8 tokenFromIndex,
        uint8 tokenToIndex,
        uint256 tokenFromAmount,
        uint256 minAmount,
        uint256 deadline,
        address recipient
    ) external onlyOwner returns (IERC20, uint256) {
        tokenFrom.approve(address(swap), tokenFromAmount);
        swap.swap(
            tokenFromIndex,
            tokenToIndex,
            tokenFromAmount,
            minAmount,
            deadline
        );
        IERC20 tokenTo = swap.getToken(tokenToIndex);
        uint256 balance = tokenTo.balanceOf(address(this));
        tokenTo.safeTransfer(recipient, balance);
        return (tokenTo, balance);
    }

    /**
     * @notice Withdraws the given amount of `token` to the `recipient`.
     * @param token the address of the token to withdraw
     * @param recipient the address of the account to receive the token
     * @param withdrawAmount the amount of the token to withdraw
     * @param shouldDestroy whether this contract should be destroyed after this call
     */
    function withdraw(
        IERC20 token,
        address recipient,
        uint256 withdrawAmount,
        bool shouldDestroy
    ) external onlyOwner {
        token.safeTransfer(recipient, withdrawAmount);
        if (shouldDestroy) {
            _destroy();
        }
    }

    /**
     * @notice Destroys this contract. Only owner can call this function.
     */
    function destroy() external onlyOwner {
        _destroy();
    }

    function _destroy() internal {
        selfdestruct(msg.sender);
    }
}

pragma solidity >=0.4.24;

import "./ISynth.sol";
import "./IVirtualSynth.sol";

// https://docs.synthetix.io/contracts/source/interfaces/isynthetix
interface ISynthetix {
    // Views
    function anySynthOrSNXRateIsInvalid() external view returns (bool anyRateInvalid);

    function availableCurrencyKeys() external view returns (bytes32[] memory);

    function availableSynthCount() external view returns (uint);

    function availableSynths(uint index) external view returns (ISynth);

    function collateral(address account) external view returns (uint);

    function collateralisationRatio(address issuer) external view returns (uint);

    function debtBalanceOf(address issuer, bytes32 currencyKey) external view returns (uint);

    function isWaitingPeriod(bytes32 currencyKey) external view returns (bool);

    function maxIssuableSynths(address issuer) external view returns (uint maxIssuable);

    function remainingIssuableSynths(address issuer)
        external
        view
        returns (
            uint maxIssuable,
            uint alreadyIssued,
            uint totalSystemDebt
        );

    function synths(bytes32 currencyKey) external view returns (ISynth);

    function synthsByAddress(address synthAddress) external view returns (bytes32);

    function totalIssuedSynths(bytes32 currencyKey) external view returns (uint);

    function totalIssuedSynthsExcludeEtherCollateral(bytes32 currencyKey) external view returns (uint);

    function transferableSynthetix(address account) external view returns (uint transferable);

    // Mutative Functions
    function burnSynths(uint amount) external;

    function burnSynthsOnBehalf(address burnForAddress, uint amount) external;

    function burnSynthsToTarget() external;

    function burnSynthsToTargetOnBehalf(address burnForAddress) external;

    function exchange(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external returns (uint amountReceived);

    function exchangeOnBehalf(
        address exchangeForAddress,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external returns (uint amountReceived);

    function exchangeWithTracking(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address originator,
        bytes32 trackingCode
    ) external returns (uint amountReceived);

    function exchangeOnBehalfWithTracking(
        address exchangeForAddress,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address originator,
        bytes32 trackingCode
    ) external returns (uint amountReceived);

    function exchangeWithVirtual(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        bytes32 trackingCode
    ) external returns (uint amountReceived, IVirtualSynth vSynth);

    function issueMaxSynths() external;

    function issueMaxSynthsOnBehalf(address issueForAddress) external;

    function issueSynths(uint amount) external;

    function issueSynthsOnBehalf(address issueForAddress, uint amount) external;

    function mint() external returns (bool);

    function settle(bytes32 currencyKey)
        external
        returns (
            uint reclaimed,
            uint refunded,
            uint numEntries
        );

    // Liquidations
    function liquidateDelinquentAccount(address account, uint susdAmount) external returns (bool);

    // Restricted Functions

    function mintSecondary(address account, uint amount) external;

    function mintSecondaryRewards(uint amount) external;

    function burnSecondary(address account, uint amount) external;
}

pragma solidity >=0.4.24;

// https://docs.synthetix.io/contracts/source/interfaces/isynth
interface ISynth {
    // Views
    function currencyKey() external view returns (bytes32);

    function transferableSynths(address account) external view returns (uint);

    // Mutative functions
    function transferAndSettle(address to, uint value) external returns (bool);

    function transferFromAndSettle(
        address from,
        address to,
        uint value
    ) external returns (bool);

    // Restricted: used internally to Synthetix
    function burn(address account, uint amount) external;

    function issue(address account, uint amount) external;
}

pragma solidity >=0.4.24;

import "./ISynth.sol";

interface IVirtualSynth {
    // Views
    function balanceOfUnderlying(address account) external view returns (uint);

    function rate() external view returns (uint);

    function readyToSettle() external view returns (bool);

    function secsLeftInWaitingPeriod() external view returns (uint);

    function settled() external view returns (bool);

    function synth() external view returns (ISynth);

    // Mutative functions
    function settle(address account) external;
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20BurnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "./interfaces/ISwapV1.sol";

/**
 * @title Liquidity Provider Token
 * @notice This token is an ERC20 detailed token with added capability to be minted by the owner.
 * It is used to represent user's shares when providing liquidity to swap contracts.
 * @dev Only Swap contracts should initialize and own LPToken contracts.
 */
contract LPTokenV1 is ERC20BurnableUpgradeable, OwnableUpgradeable {
    using SafeMathUpgradeable for uint256;

    /**
     * @notice Initializes this LPToken contract with the given name and symbol
     * @dev The caller of this function will become the owner. A Swap contract should call this
     * in its initializer function.
     * @param name name of this token
     * @param symbol symbol of this token
     */
    function initialize(string memory name, string memory symbol)
        external
        initializer
        returns (bool)
    {
        __Context_init_unchained();
        __ERC20_init_unchained(name, symbol);
        __Ownable_init_unchained();
        return true;
    }

    /**
     * @notice Mints the given amount of LPToken to the recipient.
     * @dev only owner can call this mint function
     * @param recipient address of account to receive the tokens
     * @param amount amount of tokens to mint
     */
    function mint(address recipient, uint256 amount) external onlyOwner {
        require(amount != 0, "LPToken: cannot mint 0");
        _mint(recipient, amount);
    }

    /**
     * @dev Overrides ERC20._beforeTokenTransfer() which get called on every transfers including
     * minting and burning. This ensures that Swap.updateUserWithdrawFees are called everytime.
     * This assumes the owner is set to a Swap contract's address.
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual override(ERC20Upgradeable) {
        super._beforeTokenTransfer(from, to, amount);
        require(to != address(this), "LPToken: cannot send to itself");
        ISwapV1(owner()).updateUserWithdrawFee(to, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./IAllowlist.sol";

interface ISwapV1 {
    // pool data view functions
    function getA() external view returns (uint256);

    function getAllowlist() external view returns (IAllowlist);

    function getToken(uint8 index) external view returns (IERC20);

    function getTokenIndex(address tokenAddress) external view returns (uint8);

    function getTokenBalance(uint8 index) external view returns (uint256);

    function getVirtualPrice() external view returns (uint256);

    function isGuarded() external view returns (bool);

    // min return calculation functions
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256);

    function calculateTokenAmount(
        address account,
        uint256[] calldata amounts,
        bool deposit
    ) external view returns (uint256);

    function calculateRemoveLiquidity(address account, uint256 amount)
        external
        view
        returns (uint256[] memory);

    function calculateRemoveLiquidityOneToken(
        address account,
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256 availableTokenAmount);

    // state modifying functions
    function initialize(
        IERC20[] memory pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 a,
        uint256 fee,
        uint256 adminFee,
        uint256 withdrawFee,
        address lpTokenTargetAddress
    ) external;

    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external returns (uint256[] memory);

    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external returns (uint256);

    // withdraw fee update function
    function updateUserWithdrawFee(address recipient, uint256 transferAmount)
        external;
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/proxy/Clones.sol";
import "./interfaces/ISwapV1.sol";

contract SwapDeployerV1 is Ownable {
    event NewSwapPool(
        address indexed deployer,
        address swapAddress,
        IERC20[] pooledTokens
    );

    constructor() public Ownable() {}

    function deploy(
        address swapAddress,
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        uint256 _withdrawFee,
        address lpTokenTargetAddress
    ) external returns (address) {
        address swapClone = Clones.clone(swapAddress);
        ISwapV1(swapClone).initialize(
            _pooledTokens,
            decimals,
            lpTokenName,
            lpTokenSymbol,
            _a,
            _fee,
            _adminFee,
            _withdrawFee,
            lpTokenTargetAddress
        );
        Ownable(swapClone).transferOwnership(owner());
        emit NewSwapPool(msg.sender, swapClone, _pooledTokens);
        return swapClone;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/proxy/Clones.sol";
import "synthetix/contracts/interfaces/IAddressResolver.sol";
import "synthetix/contracts/interfaces/IExchanger.sol";
import "synthetix/contracts/interfaces/IExchangeRates.sol";
import "../interfaces/ISwap.sol";
import "./SynthSwapper.sol";

contract Proxy {
    address public target;
}

contract Target {
    address public proxy;
}

/**
 * @title Bridge
 * @notice This contract is responsible for cross-asset swaps using the Synthetix protocol as the bridging exchange.
 * There are three types of supported cross-asset swaps, tokenToSynth, synthToToken, and tokenToToken.
 *
 * 1) tokenToSynth
 * Swaps a supported token in a saddle pool to any synthetic asset (e.g. tBTC -> sAAVE).
 *
 * 2) synthToToken
 * Swaps any synthetic asset to a suported token in a saddle pool (e.g. sDEFI -> USDC).
 *
 * 3) tokenToToken
 * Swaps a supported token in a saddle pool to one in another pool (e.g. renBTC -> DAI).
 *
 * Due to the settlement periods of synthetic assets, the users must wait until the trades can be completed.
 * Users will receive an ERC721 token that represents pending cross-asset swap. Once the waiting period is over,
 * the trades can be settled and completed by calling the `completeToSynth` or the `completeToToken` function.
 * In the cases of pending `synthToToken` or `tokenToToken` swaps, the owners of the pending swaps can also choose
 * to withdraw the bridging synthetic assets instead of completing the swap.
 */
contract Bridge is ERC721 {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    event SynthIndex(
        address indexed swap,
        uint8 synthIndex,
        bytes32 currencyKey,
        address synthAddress
    );
    event TokenToSynth(
        address indexed requester,
        uint256 indexed itemId,
        ISwap swapPool,
        uint8 tokenFromIndex,
        uint256 tokenFromInAmount,
        bytes32 synthToKey
    );
    event SynthToToken(
        address indexed requester,
        uint256 indexed itemId,
        ISwap swapPool,
        bytes32 synthFromKey,
        uint256 synthFromInAmount,
        uint8 tokenToIndex
    );
    event TokenToToken(
        address indexed requester,
        uint256 indexed itemId,
        ISwap[2] swapPools,
        uint8 tokenFromIndex,
        uint256 tokenFromAmount,
        uint8 tokenToIndex
    );
    event Settle(
        address indexed requester,
        uint256 indexed itemId,
        IERC20 settleFrom,
        uint256 settleFromAmount,
        IERC20 settleTo,
        uint256 settleToAmount,
        bool isFinal
    );
    event Withdraw(
        address indexed requester,
        uint256 indexed itemId,
        IERC20 synth,
        uint256 synthAmount,
        bool isFinal
    );

    // The addresses for all Synthetix contracts can be found in the below URL.
    // https://docs.synthetix.io/addresses/#mainnet-contracts
    //
    // Since the Synthetix protocol is upgradable, we must use the proxy pairs of each contract such that
    // the composability is not broken after the protocol upgrade.
    //
    // SYNTHETIX_RESOLVER points to `ReadProxyAddressResolver` (0x4E3b31eB0E5CB73641EE1E65E7dCEFe520bA3ef2).
    // This contract is a read proxy of `AddressResolver` which is responsible for storing the addresses of the contracts
    // used by the Synthetix protocol.
    IAddressResolver public constant SYNTHETIX_RESOLVER =
        IAddressResolver(0x4E3b31eB0E5CB73641EE1E65E7dCEFe520bA3ef2);

    // EXCHANGER points to `Exchanger`. There is no proxy pair for this contract so we need to update this variable
    // when the protocol is upgraded. This contract is used to settle synths held by SynthSwapper.
    IExchanger public exchanger;

    // CONSTANTS

    // Available types of cross-asset swaps
    enum PendingSwapType {
        Null,
        TokenToSynth,
        SynthToToken,
        TokenToToken
    }

    uint256 public constant MAX_UINT256 = 2**256 - 1;
    uint8 public constant MAX_UINT8 = 2**8 - 1;
    bytes32 public constant EXCHANGE_RATES_NAME = "ExchangeRates";
    bytes32 public constant EXCHANGER_NAME = "Exchanger";
    address public immutable SYNTH_SWAPPER_MASTER;

    // MAPPINGS FOR STORING PENDING SETTLEMENTS
    // The below two mappings never share the same key.
    mapping(uint256 => PendingToSynthSwap) public pendingToSynthSwaps;
    mapping(uint256 => PendingToTokenSwap) public pendingToTokenSwaps;
    uint256 public pendingSwapsLength;
    mapping(uint256 => PendingSwapType) private pendingSwapType;

    // MAPPINGS FOR STORING SYNTH INFO
    mapping(address => SwapContractInfo) private swapContracts;

    // Structs holding information about pending settlements
    struct PendingToSynthSwap {
        SynthSwapper swapper;
        bytes32 synthKey;
    }

    struct PendingToTokenSwap {
        SynthSwapper swapper;
        bytes32 synthKey;
        ISwap swap;
        uint8 tokenToIndex;
    }

    struct SwapContractInfo {
        // index of the supported synth + 1
        uint8 synthIndexPlusOne;
        // address of the supported synth
        address synthAddress;
        // bytes32 key of the supported synth
        bytes32 synthKey;
        // array of tokens supported by the contract
        IERC20[] tokens;
    }

    /**
     * @notice Deploys this contract and initializes the master version of the SynthSwapper contract. The address to
     * the Synthetix protocol's Exchanger contract is also set on deployment.
     */
    constructor(address synthSwapperAddress)
        public
        ERC721("Saddle Cross-Asset Swap", "SaddleSynthSwap")
    {
        SYNTH_SWAPPER_MASTER = synthSwapperAddress;
        updateExchangerCache();
    }

    /**
     * @notice Returns the address of the proxy contract targeting the synthetic asset with the given `synthKey`.
     * @param synthKey the currency key of the synth
     * @return address of the proxy contract
     */
    function getProxyAddressFromTargetSynthKey(bytes32 synthKey)
        public
        view
        returns (IERC20)
    {
        return IERC20(Target(SYNTHETIX_RESOLVER.getSynth(synthKey)).proxy());
    }

    /**
     * @notice Returns various information of a pending swap represented by the given `itemId`. Information includes
     * the type of the pending swap, the number of seconds left until it can be settled, the address and the balance
     * of the synth this swap currently holds, and the address of the destination token.
     * @param itemId ID of the pending swap
     * @return swapType the type of the pending virtual swap,
     * secsLeft number of seconds left until this swap can be settled,
     * synth address of the synth this swap uses,
     * synthBalance amount of the synth this swap holds,
     * tokenTo the address of the destination token
     */
    function getPendingSwapInfo(uint256 itemId)
        external
        view
        returns (
            PendingSwapType swapType,
            uint256 secsLeft,
            address synth,
            uint256 synthBalance,
            address tokenTo
        )
    {
        swapType = pendingSwapType[itemId];
        require(swapType != PendingSwapType.Null, "invalid itemId");

        SynthSwapper synthSwapper;
        bytes32 synthKey;

        if (swapType == PendingSwapType.TokenToSynth) {
            synthSwapper = pendingToSynthSwaps[itemId].swapper;
            synthKey = pendingToSynthSwaps[itemId].synthKey;
            synth = address(getProxyAddressFromTargetSynthKey(synthKey));
            tokenTo = synth;
        } else {
            PendingToTokenSwap memory pendingToTokenSwap = pendingToTokenSwaps[
                itemId
            ];
            synthSwapper = pendingToTokenSwap.swapper;
            synthKey = pendingToTokenSwap.synthKey;
            synth = address(getProxyAddressFromTargetSynthKey(synthKey));
            tokenTo = address(
                swapContracts[address(pendingToTokenSwap.swap)].tokens[
                    pendingToTokenSwap.tokenToIndex
                ]
            );
        }

        secsLeft = exchanger.maxSecsLeftInWaitingPeriod(
            address(synthSwapper),
            synthKey
        );
        synthBalance = IERC20(synth).balanceOf(address(synthSwapper));
    }

    // Settles the synth only.
    function _settle(address synthOwner, bytes32 synthKey) internal {
        // Settle synth
        exchanger.settle(synthOwner, synthKey);
    }

    /**
     * @notice Settles and withdraws the synthetic asset without swapping it to a token in a Saddle pool. Only the owner
     * of the ERC721 token of `itemId` can call this function. Reverts if the given `itemId` does not represent a
     * `synthToToken` or a `tokenToToken` swap.
     * @param itemId ID of the pending swap
     * @param amount the amount of the synth to withdraw
     */
    function withdraw(uint256 itemId, uint256 amount) external {
        address nftOwner = ownerOf(itemId);
        require(nftOwner == msg.sender, "not owner");
        require(
            pendingSwapType[itemId] > PendingSwapType.TokenToSynth,
            "invalid itemId"
        );
        PendingToTokenSwap memory pendingToTokenSwap = pendingToTokenSwaps[
            itemId
        ];
        _settle(
            address(pendingToTokenSwap.swapper),
            pendingToTokenSwap.synthKey
        );

        IERC20 synth = getProxyAddressFromTargetSynthKey(
            pendingToTokenSwap.synthKey
        );
        bool shouldDestroy;

        if (amount >= synth.balanceOf(address(pendingToTokenSwap.swapper))) {
            _burn(itemId);
            delete pendingToTokenSwaps[itemId];
            delete pendingSwapType[itemId];
            shouldDestroy = true;
        }

        pendingToTokenSwap.swapper.withdraw(
            synth,
            nftOwner,
            amount,
            shouldDestroy
        );
        emit Withdraw(msg.sender, itemId, synth, amount, shouldDestroy);
    }

    /**
     * @notice Completes the pending `tokenToSynth` swap by settling and withdrawing the synthetic asset.
     * Reverts if the given `itemId` does not represent a `tokenToSynth` swap.
     * @param itemId ERC721 token ID representing a pending `tokenToSynth` swap
     */
    function completeToSynth(uint256 itemId) external {
        address nftOwner = ownerOf(itemId);
        require(nftOwner == msg.sender, "not owner");
        require(
            pendingSwapType[itemId] == PendingSwapType.TokenToSynth,
            "invalid itemId"
        );

        PendingToSynthSwap memory pendingToSynthSwap = pendingToSynthSwaps[
            itemId
        ];
        _settle(
            address(pendingToSynthSwap.swapper),
            pendingToSynthSwap.synthKey
        );

        IERC20 synth = getProxyAddressFromTargetSynthKey(
            pendingToSynthSwap.synthKey
        );

        // Burn the corresponding ERC721 token and delete storage for gas
        _burn(itemId);
        delete pendingToTokenSwaps[itemId];
        delete pendingSwapType[itemId];

        // After settlement, withdraw the synth and send it to the recipient
        uint256 synthBalance = synth.balanceOf(
            address(pendingToSynthSwap.swapper)
        );
        pendingToSynthSwap.swapper.withdraw(
            synth,
            nftOwner,
            synthBalance,
            true
        );

        emit Settle(
            msg.sender,
            itemId,
            synth,
            synthBalance,
            synth,
            synthBalance,
            true
        );
    }

    /**
     * @notice Calculates the expected amount of the token to receive on calling `completeToToken()` with
     * the given `swapAmount`.
     * @param itemId ERC721 token ID representing a pending `SynthToToken` or `TokenToToken` swap
     * @param swapAmount the amount of bridging synth to swap from
     * @return expected amount of the token the user will receive
     */
    function calcCompleteToToken(uint256 itemId, uint256 swapAmount)
        external
        view
        returns (uint256)
    {
        require(
            pendingSwapType[itemId] > PendingSwapType.TokenToSynth,
            "invalid itemId"
        );

        PendingToTokenSwap memory pendingToTokenSwap = pendingToTokenSwaps[
            itemId
        ];
        return
            pendingToTokenSwap.swap.calculateSwap(
                getSynthIndex(pendingToTokenSwap.swap),
                pendingToTokenSwap.tokenToIndex,
                swapAmount
            );
    }

    /**
     * @notice Completes the pending `SynthToToken` or `TokenToToken` swap by settling the bridging synth and swapping
     * it to the desired token. Only the owners of the pending swaps can call this function.
     * @param itemId ERC721 token ID representing a pending `SynthToToken` or `TokenToToken` swap
     * @param swapAmount the amount of bridging synth to swap from
     * @param minAmount the minimum amount of the token to receive - reverts if this amount is not reached
     * @param deadline the timestamp representing the deadline for this transaction - reverts if deadline is not met
     */
    function completeToToken(
        uint256 itemId,
        uint256 swapAmount,
        uint256 minAmount,
        uint256 deadline
    ) external {
        require(swapAmount != 0, "amount must be greater than 0");
        address nftOwner = ownerOf(itemId);
        require(msg.sender == nftOwner, "must own itemId");
        require(
            pendingSwapType[itemId] > PendingSwapType.TokenToSynth,
            "invalid itemId"
        );

        PendingToTokenSwap memory pendingToTokenSwap = pendingToTokenSwaps[
            itemId
        ];

        _settle(
            address(pendingToTokenSwap.swapper),
            pendingToTokenSwap.synthKey
        );
        IERC20 synth = getProxyAddressFromTargetSynthKey(
            pendingToTokenSwap.synthKey
        );
        bool shouldDestroyClone;

        if (
            swapAmount >= synth.balanceOf(address(pendingToTokenSwap.swapper))
        ) {
            _burn(itemId);
            delete pendingToTokenSwaps[itemId];
            delete pendingSwapType[itemId];
            shouldDestroyClone = true;
        }

        // Try swapping the synth to the desired token via the stored swap pool contract
        // If the external call succeeds, send the token to the owner of token with itemId.
        (IERC20 tokenTo, uint256 amountOut) = pendingToTokenSwap
            .swapper
            .swapSynthToToken(
                pendingToTokenSwap.swap,
                synth,
                getSynthIndex(pendingToTokenSwap.swap),
                pendingToTokenSwap.tokenToIndex,
                swapAmount,
                minAmount,
                deadline,
                nftOwner
            );

        if (shouldDestroyClone) {
            pendingToTokenSwap.swapper.destroy();
        }

        emit Settle(
            msg.sender,
            itemId,
            synth,
            swapAmount,
            tokenTo,
            amountOut,
            shouldDestroyClone
        );
    }

    // Add the given pending synth settlement struct to the list
    function _addToPendingSynthSwapList(
        PendingToSynthSwap memory pendingToSynthSwap
    ) internal returns (uint256) {
        require(
            pendingSwapsLength < MAX_UINT256,
            "pendingSwapsLength reached max size"
        );
        pendingToSynthSwaps[pendingSwapsLength] = pendingToSynthSwap;
        return pendingSwapsLength++;
    }

    // Add the given pending synth to token settlement struct to the list
    function _addToPendingSynthToTokenSwapList(
        PendingToTokenSwap memory pendingToTokenSwap
    ) internal returns (uint256) {
        require(
            pendingSwapsLength < MAX_UINT256,
            "pendingSwapsLength reached max size"
        );
        pendingToTokenSwaps[pendingSwapsLength] = pendingToTokenSwap;
        return pendingSwapsLength++;
    }

    /**
     * @notice Calculates the expected amount of the desired synthetic asset the caller will receive after completing
     * a `TokenToSynth` swap with the given parameters. This calculation does not consider the settlement periods.
     * @param swap the address of a Saddle pool to use to swap the given token to a bridging synth
     * @param tokenFromIndex the index of the token to swap from
     * @param synthOutKey the currency key of the desired synthetic asset
     * @param tokenInAmount the amount of the token to swap form
     * @return the expected amount of the desired synth
     */
    function calcTokenToSynth(
        ISwap swap,
        uint8 tokenFromIndex,
        bytes32 synthOutKey,
        uint256 tokenInAmount
    ) external view returns (uint256) {
        uint8 mediumSynthIndex = getSynthIndex(swap);
        uint256 expectedMediumSynthAmount = swap.calculateSwap(
            tokenFromIndex,
            mediumSynthIndex,
            tokenInAmount
        );
        bytes32 mediumSynthKey = getSynthKey(swap);

        IExchangeRates exchangeRates = IExchangeRates(
            SYNTHETIX_RESOLVER.getAddress(EXCHANGE_RATES_NAME)
        );
        return
            exchangeRates.effectiveValue(
                mediumSynthKey,
                expectedMediumSynthAmount,
                synthOutKey
            );
    }

    /**
     * @notice Initiates a cross-asset swap from a token supported in the `swap` pool to any synthetic asset.
     * The caller will receive an ERC721 token representing their ownership of the pending cross-asset swap.
     * @param swap the address of a Saddle pool to use to swap the given token to a bridging synth
     * @param tokenFromIndex the index of the token to swap from
     * @param synthOutKey the currency key of the desired synthetic asset
     * @param tokenInAmount the amount of the token to swap form
     * @param minAmount the amount of the token to swap form
     * @return ID of the ERC721 token sent to the caller
     */
    function tokenToSynth(
        ISwap swap,
        uint8 tokenFromIndex,
        bytes32 synthOutKey,
        uint256 tokenInAmount,
        uint256 minAmount
    ) external returns (uint256) {
        require(tokenInAmount != 0, "amount must be greater than 0");
        // Create a SynthSwapper clone
        SynthSwapper synthSwapper = SynthSwapper(
            Clones.clone(SYNTH_SWAPPER_MASTER)
        );
        synthSwapper.initialize();

        // Add the synthswapper to the pending settlement list
        uint256 itemId = _addToPendingSynthSwapList(
            PendingToSynthSwap(synthSwapper, synthOutKey)
        );
        pendingSwapType[itemId] = PendingSwapType.TokenToSynth;

        // Mint an ERC721 token that represents ownership of the pending synth settlement to msg.sender
        _mint(msg.sender, itemId);

        // Transfer token from msg.sender
        IERC20 tokenFrom = swapContracts[address(swap)].tokens[tokenFromIndex]; // revert when token not found in swap pool
        tokenFrom.safeTransferFrom(msg.sender, address(this), tokenInAmount);
        tokenInAmount = tokenFrom.balanceOf(address(this));

        // Swap the synth to the medium synth
        uint256 mediumSynthAmount = swap.swap(
            tokenFromIndex,
            getSynthIndex(swap),
            tokenInAmount,
            0,
            block.timestamp
        );

        // Swap synths via Synthetix network
        IERC20(getSynthAddress(swap)).safeTransfer(
            address(synthSwapper),
            mediumSynthAmount
        );
        require(
            synthSwapper.swapSynth(
                getSynthKey(swap),
                mediumSynthAmount,
                synthOutKey
            ) >= minAmount,
            "minAmount not reached"
        );

        // Emit TokenToSynth event with relevant data
        emit TokenToSynth(
            msg.sender,
            itemId,
            swap,
            tokenFromIndex,
            tokenInAmount,
            synthOutKey
        );

        return (itemId);
    }

    /**
     * @notice Calculates the expected amount of the desired token the caller will receive after completing
     * a `SynthToToken` swap with the given parameters. This calculation does not consider the settlement periods or
     * any potential changes of the `swap` pool composition.
     * @param swap the address of a Saddle pool to use to swap the given token to a bridging synth
     * @param synthInKey the currency key of the synth to swap from
     * @param tokenToIndex the index of the token to swap to
     * @param synthInAmount the amount of the synth to swap form
     * @return the expected amount of the bridging synth and the expected amount of the desired token
     */
    function calcSynthToToken(
        ISwap swap,
        bytes32 synthInKey,
        uint8 tokenToIndex,
        uint256 synthInAmount
    ) external view returns (uint256, uint256) {
        IExchangeRates exchangeRates = IExchangeRates(
            SYNTHETIX_RESOLVER.getAddress(EXCHANGE_RATES_NAME)
        );

        uint8 mediumSynthIndex = getSynthIndex(swap);
        bytes32 mediumSynthKey = getSynthKey(swap);
        require(synthInKey != mediumSynthKey, "use normal swap");

        uint256 expectedMediumSynthAmount = exchangeRates.effectiveValue(
            synthInKey,
            synthInAmount,
            mediumSynthKey
        );

        return (
            expectedMediumSynthAmount,
            swap.calculateSwap(
                mediumSynthIndex,
                tokenToIndex,
                expectedMediumSynthAmount
            )
        );
    }

    /**
     * @notice Initiates a cross-asset swap from a synthetic asset to a supported token. The caller will receive
     * an ERC721 token representing their ownership of the pending cross-asset swap.
     * @param swap the address of a Saddle pool to use to swap the given token to a bridging synth
     * @param synthInKey the currency key of the synth to swap from
     * @param tokenToIndex the index of the token to swap to
     * @param synthInAmount the amount of the synth to swap form
     * @param minMediumSynthAmount the minimum amount of the bridging synth at pre-settlement stage
     * @return the ID of the ERC721 token sent to the caller
     */
    function synthToToken(
        ISwap swap,
        bytes32 synthInKey,
        uint8 tokenToIndex,
        uint256 synthInAmount,
        uint256 minMediumSynthAmount
    ) external returns (uint256) {
        require(synthInAmount != 0, "amount must be greater than 0");
        bytes32 mediumSynthKey = getSynthKey(swap);
        require(
            synthInKey != mediumSynthKey,
            "synth is supported via normal swap"
        );

        // Create a SynthSwapper clone
        SynthSwapper synthSwapper = SynthSwapper(
            Clones.clone(SYNTH_SWAPPER_MASTER)
        );
        synthSwapper.initialize();

        // Add the synthswapper to the pending synth to token settlement list
        uint256 itemId = _addToPendingSynthToTokenSwapList(
            PendingToTokenSwap(synthSwapper, mediumSynthKey, swap, tokenToIndex)
        );
        pendingSwapType[itemId] = PendingSwapType.SynthToToken;

        // Mint an ERC721 token that represents ownership of the pending synth to token settlement to msg.sender
        _mint(msg.sender, itemId);

        // Receive synth from the user and swap it to another synth
        IERC20 synthFrom = getProxyAddressFromTargetSynthKey(synthInKey);
        synthFrom.safeTransferFrom(msg.sender, address(this), synthInAmount);
        synthFrom.safeTransfer(address(synthSwapper), synthInAmount);
        require(
            synthSwapper.swapSynth(synthInKey, synthInAmount, mediumSynthKey) >=
                minMediumSynthAmount,
            "minMediumSynthAmount not reached"
        );

        // Emit SynthToToken event with relevant data
        emit SynthToToken(
            msg.sender,
            itemId,
            swap,
            synthInKey,
            synthInAmount,
            tokenToIndex
        );

        return (itemId);
    }

    /**
     * @notice Calculates the expected amount of the desired token the caller will receive after completing
     * a `TokenToToken` swap with the given parameters. This calculation does not consider the settlement periods or
     * any potential changes of the pool compositions.
     * @param swaps the addresses of the two Saddle pools used to do the cross-asset swap
     * @param tokenFromIndex the index of the token in the first `swaps` pool to swap from
     * @param tokenToIndex the index of the token in the second `swaps` pool to swap to
     * @param tokenFromAmount the amount of the token to swap from
     * @return the expected amount of bridging synth at pre-settlement stage and the expected amount of the desired
     * token
     */
    function calcTokenToToken(
        ISwap[2] calldata swaps,
        uint8 tokenFromIndex,
        uint8 tokenToIndex,
        uint256 tokenFromAmount
    ) external view returns (uint256, uint256) {
        IExchangeRates exchangeRates = IExchangeRates(
            SYNTHETIX_RESOLVER.getAddress(EXCHANGE_RATES_NAME)
        );

        uint256 firstSynthAmount = swaps[0].calculateSwap(
            tokenFromIndex,
            getSynthIndex(swaps[0]),
            tokenFromAmount
        );

        uint256 mediumSynthAmount = exchangeRates.effectiveValue(
            getSynthKey(swaps[0]),
            firstSynthAmount,
            getSynthKey(swaps[1])
        );

        return (
            mediumSynthAmount,
            swaps[1].calculateSwap(
                getSynthIndex(swaps[1]),
                tokenToIndex,
                mediumSynthAmount
            )
        );
    }

    /**
     * @notice Initiates a cross-asset swap from a token in one Saddle pool to one in another. The caller will receive
     * an ERC721 token representing their ownership of the pending cross-asset swap.
     * @param swaps the addresses of the two Saddle pools used to do the cross-asset swap
     * @param tokenFromIndex the index of the token in the first `swaps` pool to swap from
     * @param tokenToIndex the index of the token in the second `swaps` pool to swap to
     * @param tokenFromAmount the amount of the token to swap from
     * @param minMediumSynthAmount the minimum amount of the bridging synth at pre-settlement stage
     * @return the ID of the ERC721 token sent to the caller
     */
    function tokenToToken(
        ISwap[2] calldata swaps,
        uint8 tokenFromIndex,
        uint8 tokenToIndex,
        uint256 tokenFromAmount,
        uint256 minMediumSynthAmount
    ) external returns (uint256) {
        // Create a SynthSwapper clone
        require(tokenFromAmount != 0, "amount must be greater than 0");
        SynthSwapper synthSwapper = SynthSwapper(
            Clones.clone(SYNTH_SWAPPER_MASTER)
        );
        synthSwapper.initialize();
        bytes32 mediumSynthKey = getSynthKey(swaps[1]);

        // Add the synthswapper to the pending synth to token settlement list
        uint256 itemId = _addToPendingSynthToTokenSwapList(
            PendingToTokenSwap(
                synthSwapper,
                mediumSynthKey,
                swaps[1],
                tokenToIndex
            )
        );
        pendingSwapType[itemId] = PendingSwapType.TokenToToken;

        // Mint an ERC721 token that represents ownership of the pending swap to msg.sender
        _mint(msg.sender, itemId);

        // Receive token from the user
        ISwap swap = swaps[0];
        {
            IERC20 tokenFrom = swapContracts[address(swap)].tokens[
                tokenFromIndex
            ];
            tokenFrom.safeTransferFrom(
                msg.sender,
                address(this),
                tokenFromAmount
            );
        }

        uint256 firstSynthAmount = swap.swap(
            tokenFromIndex,
            getSynthIndex(swap),
            tokenFromAmount,
            0,
            block.timestamp
        );

        // Swap the synth to another synth
        IERC20(getSynthAddress(swap)).safeTransfer(
            address(synthSwapper),
            firstSynthAmount
        );
        require(
            synthSwapper.swapSynth(
                getSynthKey(swap),
                firstSynthAmount,
                mediumSynthKey
            ) >= minMediumSynthAmount,
            "minMediumSynthAmount not reached"
        );

        // Emit TokenToToken event with relevant data
        emit TokenToToken(
            msg.sender,
            itemId,
            swaps,
            tokenFromIndex,
            tokenFromAmount,
            tokenToIndex
        );

        return (itemId);
    }

    /**
     * @notice Registers the index and the address of the supported synth from the given `swap` pool. The matching currency key must
     * be supplied for a successful registration.
     * @param swap the address of the pool that contains the synth
     * @param synthIndex the index of the supported synth in the given `swap` pool
     * @param currencyKey the currency key of the synth in bytes32 form
     */
    function setSynthIndex(
        ISwap swap,
        uint8 synthIndex,
        bytes32 currencyKey
    ) external {
        require(synthIndex < MAX_UINT8, "index is too large");
        SwapContractInfo storage swapContractInfo = swapContracts[
            address(swap)
        ];
        // Check if the pool has already been added
        require(swapContractInfo.synthIndexPlusOne == 0, "Pool already added");
        // Ensure the synth with the same currency key exists at the given `synthIndex`
        IERC20 synth = swap.getToken(synthIndex);
        require(
            ISynth(Proxy(address(synth)).target()).currencyKey() == currencyKey,
            "currencyKey does not match"
        );
        swapContractInfo.synthIndexPlusOne = synthIndex + 1;
        swapContractInfo.synthAddress = address(synth);
        swapContractInfo.synthKey = currencyKey;
        swapContractInfo.tokens = new IERC20[](0);

        for (uint8 i = 0; i < MAX_UINT8; i++) {
            IERC20 token;
            if (i == synthIndex) {
                token = synth;
            } else {
                try swap.getToken(i) returns (IERC20 token_) {
                    token = token_;
                } catch {
                    break;
                }
            }
            swapContractInfo.tokens.push(token);
            token.safeApprove(address(swap), MAX_UINT256);
        }

        emit SynthIndex(address(swap), synthIndex, currencyKey, address(synth));
    }

    /**
     * @notice Returns the index of the supported synth in the given `swap` pool. Reverts if the `swap` pool
     * is not registered.
     * @param swap the address of the pool that contains the synth
     * @return the index of the supported synth
     */
    function getSynthIndex(ISwap swap) public view returns (uint8) {
        uint8 synthIndexPlusOne = swapContracts[address(swap)]
            .synthIndexPlusOne;
        require(synthIndexPlusOne > 0, "synth index not found for given pool");
        return synthIndexPlusOne - 1;
    }

    /**
     * @notice Returns the address of the supported synth in the given `swap` pool. Reverts if the `swap` pool
     * is not registered.
     * @param swap the address of the pool that contains the synth
     * @return the address of the supported synth
     */
    function getSynthAddress(ISwap swap) public view returns (address) {
        address synthAddress = swapContracts[address(swap)].synthAddress;
        require(
            synthAddress != address(0),
            "synth addr not found for given pool"
        );
        return synthAddress;
    }

    /**
     * @notice Returns the currency key of the supported synth in the given `swap` pool. Reverts if the `swap` pool
     * is not registered.
     * @param swap the address of the pool that contains the synth
     * @return the currency key of the supported synth
     */
    function getSynthKey(ISwap swap) public view returns (bytes32) {
        bytes32 synthKey = swapContracts[address(swap)].synthKey;
        require(synthKey != 0x0, "synth key not found for given pool");
        return synthKey;
    }

    /**
     * @notice Updates the stored address of the `EXCHANGER` contract. When the Synthetix team upgrades their protocol,
     * a new Exchanger contract is deployed. This function manually updates the stored address.
     */
    function updateExchangerCache() public {
        exchanger = IExchanger(SYNTHETIX_RESOLVER.getAddress(EXCHANGER_NAME));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./IERC721.sol";
import "./IERC721Metadata.sol";
import "./IERC721Enumerable.sol";
import "./IERC721Receiver.sol";
import "../../introspection/ERC165.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
import "../../utils/EnumerableSet.sol";
import "../../utils/EnumerableMap.sol";
import "../../utils/Strings.sol";

/**
 * @title ERC721 Non-Fungible Token Standard basic implementation
 * @dev see https://eips.ethereum.org/EIPS/eip-721
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
    using SafeMath for uint256;
    using Address for address;
    using EnumerableSet for EnumerableSet.UintSet;
    using EnumerableMap for EnumerableMap.UintToAddressMap;
    using Strings for uint256;

    // Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
    // which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
    bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;

    // Mapping from holder address to their (enumerable) set of owned tokens
    mapping (address => EnumerableSet.UintSet) private _holderTokens;

    // Enumerable mapping from token ids to their owners
    EnumerableMap.UintToAddressMap private _tokenOwners;

    // Mapping from token ID to approved address
    mapping (uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping (address => mapping (address => bool)) private _operatorApprovals;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Optional mapping for token URIs
    mapping (uint256 => string) private _tokenURIs;

    // Base URI
    string private _baseURI;

    /*
     *     bytes4(keccak256('balanceOf(address)')) == 0x70a08231
     *     bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
     *     bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
     *     bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
     *     bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
     *     bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
     *     bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
     *
     *     => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
     *        0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
     */
    bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;

    /*
     *     bytes4(keccak256('name()')) == 0x06fdde03
     *     bytes4(keccak256('symbol()')) == 0x95d89b41
     *     bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
     *
     *     => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
     */
    bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;

    /*
     *     bytes4(keccak256('totalSupply()')) == 0x18160ddd
     *     bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
     *     bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
     *
     *     => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
     */
    bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;

        // register the supported interfaces to conform to ERC721 via ERC165
        _registerInterface(_INTERFACE_ID_ERC721);
        _registerInterface(_INTERFACE_ID_ERC721_METADATA);
        _registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _holderTokens[owner].length();
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory _tokenURI = _tokenURIs[tokenId];
        string memory base = baseURI();

        // If there is no base URI, return the token URI.
        if (bytes(base).length == 0) {
            return _tokenURI;
        }
        // If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
        if (bytes(_tokenURI).length > 0) {
            return string(abi.encodePacked(base, _tokenURI));
        }
        // If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
        return string(abi.encodePacked(base, tokenId.toString()));
    }

    /**
    * @dev Returns the base URI set via {_setBaseURI}. This will be
    * automatically added as a prefix in {tokenURI} to each token's URI, or
    * to the token ID if no specific URI is set for that token ID.
    */
    function baseURI() public view virtual returns (string memory) {
        return _baseURI;
    }

    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
        return _holderTokens[owner].at(index);
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        // _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
        return _tokenOwners.length();
    }

    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     */
    function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
        (uint256 tokenId, ) = _tokenOwners.at(index);
        return tokenId;
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(operator != _msgSender(), "ERC721: approve to caller");

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _tokenOwners.contains(tokenId);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     d*
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
        _mint(to, tokenId);
        require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _holderTokens[to].add(tokenId);

        _tokenOwners.set(tokenId, to);

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId); // internal owner

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        // Clear metadata (if any)
        if (bytes(_tokenURIs[tokenId]).length != 0) {
            delete _tokenURIs[tokenId];
        }

        _holderTokens[owner].remove(tokenId);

        _tokenOwners.remove(tokenId);

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own"); // internal owner
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _holderTokens[from].remove(tokenId);
        _holderTokens[to].add(tokenId);

        _tokenOwners.set(tokenId, to);

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
        require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
        _tokenURIs[tokenId] = _tokenURI;
    }

    /**
     * @dev Internal function to set the base URI for all token IDs. It is
     * automatically added as a prefix to the value returned in {tokenURI},
     * or to the token ID if {tokenURI} is empty.
     */
    function _setBaseURI(string memory baseURI_) internal virtual {
        _baseURI = baseURI_;
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
        private returns (bool)
    {
        if (!to.isContract()) {
            return true;
        }
        bytes memory returndata = to.functionCall(abi.encodeWithSelector(
            IERC721Receiver(to).onERC721Received.selector,
            _msgSender(),
            from,
            tokenId,
            _data
        ), "ERC721: transfer to non ERC721Receiver implementer");
        bytes4 retval = abi.decode(returndata, (bytes4));
        return (retval == _ERC721_RECEIVED);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId); // internal owner
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}

pragma solidity >=0.4.24;

// https://docs.synthetix.io/contracts/source/interfaces/iaddressresolver
interface IAddressResolver {
    function getAddress(bytes32 name) external view returns (address);

    function getSynth(bytes32 key) external view returns (address);

    function requireAndGetAddress(bytes32 name, string calldata reason) external view returns (address);
}

pragma solidity >=0.4.24;

import "./IVirtualSynth.sol";

// https://docs.synthetix.io/contracts/source/interfaces/iexchanger
interface IExchanger {
    // Views
    function calculateAmountAfterSettlement(
        address from,
        bytes32 currencyKey,
        uint amount,
        uint refunded
    ) external view returns (uint amountAfterSettlement);

    function isSynthRateInvalid(bytes32 currencyKey) external view returns (bool);

    function maxSecsLeftInWaitingPeriod(address account, bytes32 currencyKey) external view returns (uint);

    function settlementOwing(address account, bytes32 currencyKey)
        external
        view
        returns (
            uint reclaimAmount,
            uint rebateAmount,
            uint numEntries
        );

    function hasWaitingPeriodOrSettlementOwing(address account, bytes32 currencyKey) external view returns (bool);

    function feeRateForExchange(bytes32 sourceCurrencyKey, bytes32 destinationCurrencyKey)
        external
        view
        returns (uint exchangeFeeRate);

    function getAmountsForExchange(
        uint sourceAmount,
        bytes32 sourceCurrencyKey,
        bytes32 destinationCurrencyKey
    )
        external
        view
        returns (
            uint amountReceived,
            uint fee,
            uint exchangeFeeRate
        );

    function priceDeviationThresholdFactor() external view returns (uint);

    function waitingPeriodSecs() external view returns (uint);

    // Mutative functions
    function exchange(
        address from,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address destinationAddress
    ) external returns (uint amountReceived);

    function exchangeOnBehalf(
        address exchangeForAddress,
        address from,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external returns (uint amountReceived);

    function exchangeWithTracking(
        address from,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address destinationAddress,
        address originator,
        bytes32 trackingCode
    ) external returns (uint amountReceived);

    function exchangeOnBehalfWithTracking(
        address exchangeForAddress,
        address from,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address originator,
        bytes32 trackingCode
    ) external returns (uint amountReceived);

    function exchangeWithVirtual(
        address from,
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        address destinationAddress,
        bytes32 trackingCode
    ) external returns (uint amountReceived, IVirtualSynth vSynth);

    function settle(address from, bytes32 currencyKey)
        external
        returns (
            uint reclaimed,
            uint refunded,
            uint numEntries
        );

    function setLastExchangeRateForSynth(bytes32 currencyKey, uint rate) external;

    function suspendSynthWithInvalidRate(bytes32 currencyKey) external;
}

pragma solidity >=0.4.24;

// https://docs.synthetix.io/contracts/source/interfaces/iexchangerates
interface IExchangeRates {
    // Structs
    struct RateAndUpdatedTime {
        uint216 rate;
        uint40 time;
    }

    struct InversePricing {
        uint entryPoint;
        uint upperLimit;
        uint lowerLimit;
        bool frozenAtUpperLimit;
        bool frozenAtLowerLimit;
    }

    // Views
    function aggregators(bytes32 currencyKey) external view returns (address);

    function aggregatorWarningFlags() external view returns (address);

    function anyRateIsInvalid(bytes32[] calldata currencyKeys) external view returns (bool);

    function canFreezeRate(bytes32 currencyKey) external view returns (bool);

    function currentRoundForRate(bytes32 currencyKey) external view returns (uint);

    function currenciesUsingAggregator(address aggregator) external view returns (bytes32[] memory);

    function effectiveValue(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    ) external view returns (uint value);

    function effectiveValueAndRates(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey
    )
        external
        view
        returns (
            uint value,
            uint sourceRate,
            uint destinationRate
        );

    function effectiveValueAtRound(
        bytes32 sourceCurrencyKey,
        uint sourceAmount,
        bytes32 destinationCurrencyKey,
        uint roundIdForSrc,
        uint roundIdForDest
    ) external view returns (uint value);

    function getCurrentRoundId(bytes32 currencyKey) external view returns (uint);

    function getLastRoundIdBeforeElapsedSecs(
        bytes32 currencyKey,
        uint startingRoundId,
        uint startingTimestamp,
        uint timediff
    ) external view returns (uint);

    function inversePricing(bytes32 currencyKey)
        external
        view
        returns (
            uint entryPoint,
            uint upperLimit,
            uint lowerLimit,
            bool frozenAtUpperLimit,
            bool frozenAtLowerLimit
        );

    function lastRateUpdateTimes(bytes32 currencyKey) external view returns (uint256);

    function oracle() external view returns (address);

    function rateAndTimestampAtRound(bytes32 currencyKey, uint roundId) external view returns (uint rate, uint time);

    function rateAndUpdatedTime(bytes32 currencyKey) external view returns (uint rate, uint time);

    function rateAndInvalid(bytes32 currencyKey) external view returns (uint rate, bool isInvalid);

    function rateForCurrency(bytes32 currencyKey) external view returns (uint);

    function rateIsFlagged(bytes32 currencyKey) external view returns (bool);

    function rateIsFrozen(bytes32 currencyKey) external view returns (bool);

    function rateIsInvalid(bytes32 currencyKey) external view returns (bool);

    function rateIsStale(bytes32 currencyKey) external view returns (bool);

    function rateStalePeriod() external view returns (uint);

    function ratesAndUpdatedTimeForCurrencyLastNRounds(bytes32 currencyKey, uint numRounds)
        external
        view
        returns (uint[] memory rates, uint[] memory times);

    function ratesAndInvalidForCurrencies(bytes32[] calldata currencyKeys)
        external
        view
        returns (uint[] memory rates, bool anyRateInvalid);

    function ratesForCurrencies(bytes32[] calldata currencyKeys) external view returns (uint[] memory);

    // Mutative functions
    function freezeRate(bytes32 currencyKey) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

import "../../introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
      * @dev Safely transfers `tokenId` token from `from` to `to`.
      *
      * Requirements:
      *
      * - `from` cannot be the zero address.
      * - `to` cannot be the zero address.
      * - `tokenId` token must exist and be owned by `from`.
      * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
      * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
      *
      * Emits a {Transfer} event.
      */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

import "./IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

import "./IERC721.sol";

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {

    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts may inherit from this and call {_registerInterface} to declare
 * their support of an interface.
 */
abstract contract ERC165 is IERC165 {
    /*
     * bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
     */
    bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;

    /**
     * @dev Mapping of interface ids to whether or not it's supported.
     */
    mapping(bytes4 => bool) private _supportedInterfaces;

    constructor () internal {
        // Derived contracts need only register support for their own interfaces,
        // we register support for ERC165 itself here
        _registerInterface(_INTERFACE_ID_ERC165);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     *
     * Time complexity O(1), guaranteed to always use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return _supportedInterfaces[interfaceId];
    }

    /**
     * @dev Registers the contract as an implementer of the interface defined by
     * `interfaceId`. Support of the actual ERC165 interface is automatic and
     * registering its interface id is not required.
     *
     * See {IERC165-supportsInterface}.
     *
     * Requirements:
     *
     * - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
     */
    function _registerInterface(bytes4 interfaceId) internal virtual {
        require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
        _supportedInterfaces[interfaceId] = true;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Library for managing an enumerable variant of Solidity's
 * https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
 * type.
 *
 * Maps have the following properties:
 *
 * - Entries are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Entries are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableMap for EnumerableMap.UintToAddressMap;
 *
 *     // Declare a set state variable
 *     EnumerableMap.UintToAddressMap private myMap;
 * }
 * ```
 *
 * As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
 * supported.
 */
library EnumerableMap {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Map type with
    // bytes32 keys and values.
    // The Map implementation uses private functions, and user-facing
    // implementations (such as Uint256ToAddressMap) are just wrappers around
    // the underlying Map.
    // This means that we can only create new EnumerableMaps for types that fit
    // in bytes32.

    struct MapEntry {
        bytes32 _key;
        bytes32 _value;
    }

    struct Map {
        // Storage of map keys and values
        MapEntry[] _entries;

        // Position of the entry defined by a key in the `entries` array, plus 1
        // because index 0 means a key is not in the map.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
        // We read and store the key's index to prevent multiple reads from the same storage slot
        uint256 keyIndex = map._indexes[key];

        if (keyIndex == 0) { // Equivalent to !contains(map, key)
            map._entries.push(MapEntry({ _key: key, _value: value }));
            // The entry is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            map._indexes[key] = map._entries.length;
            return true;
        } else {
            map._entries[keyIndex - 1]._value = value;
            return false;
        }
    }

    /**
     * @dev Removes a key-value pair from a map. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function _remove(Map storage map, bytes32 key) private returns (bool) {
        // We read and store the key's index to prevent multiple reads from the same storage slot
        uint256 keyIndex = map._indexes[key];

        if (keyIndex != 0) { // Equivalent to contains(map, key)
            // To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
            // in the array, and then remove the last entry (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = keyIndex - 1;
            uint256 lastIndex = map._entries.length - 1;

            // When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            MapEntry storage lastEntry = map._entries[lastIndex];

            // Move the last entry to the index where the entry to delete is
            map._entries[toDeleteIndex] = lastEntry;
            // Update the index for the moved entry
            map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved entry was stored
            map._entries.pop();

            // Delete the index for the deleted slot
            delete map._indexes[key];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function _contains(Map storage map, bytes32 key) private view returns (bool) {
        return map._indexes[key] != 0;
    }

    /**
     * @dev Returns the number of key-value pairs in the map. O(1).
     */
    function _length(Map storage map) private view returns (uint256) {
        return map._entries.length;
    }

   /**
    * @dev Returns the key-value pair stored at position `index` in the map. O(1).
    *
    * Note that there are no guarantees on the ordering of entries inside the
    * array, and it may change when more entries are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
        require(map._entries.length > index, "EnumerableMap: index out of bounds");

        MapEntry storage entry = map._entries[index];
        return (entry._key, entry._value);
    }

    /**
     * @dev Tries to returns the value associated with `key`.  O(1).
     * Does not revert if `key` is not in the map.
     */
    function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) {
        uint256 keyIndex = map._indexes[key];
        if (keyIndex == 0) return (false, 0); // Equivalent to contains(map, key)
        return (true, map._entries[keyIndex - 1]._value); // All indexes are 1-based
    }

    /**
     * @dev Returns the value associated with `key`.  O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function _get(Map storage map, bytes32 key) private view returns (bytes32) {
        uint256 keyIndex = map._indexes[key];
        require(keyIndex != 0, "EnumerableMap: nonexistent key"); // Equivalent to contains(map, key)
        return map._entries[keyIndex - 1]._value; // All indexes are 1-based
    }

    /**
     * @dev Same as {_get}, with a custom error message when `key` is not in the map.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {_tryGet}.
     */
    function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
        uint256 keyIndex = map._indexes[key];
        require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
        return map._entries[keyIndex - 1]._value; // All indexes are 1-based
    }

    // UintToAddressMap

    struct UintToAddressMap {
        Map _inner;
    }

    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
        return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
        return _remove(map._inner, bytes32(key));
    }

    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
        return _contains(map._inner, bytes32(key));
    }

    /**
     * @dev Returns the number of elements in the map. O(1).
     */
    function length(UintToAddressMap storage map) internal view returns (uint256) {
        return _length(map._inner);
    }

   /**
    * @dev Returns the element stored at position `index` in the set. O(1).
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
        (bytes32 key, bytes32 value) = _at(map._inner, index);
        return (uint256(key), address(uint160(uint256(value))));
    }

    /**
     * @dev Tries to returns the value associated with `key`.  O(1).
     * Does not revert if `key` is not in the map.
     *
     * _Available since v3.4._
     */
    function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
        (bool success, bytes32 value) = _tryGet(map._inner, bytes32(key));
        return (success, address(uint160(uint256(value))));
    }

    /**
     * @dev Returns the value associated with `key`.  O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
        return address(uint160(uint256(_get(map._inner, bytes32(key)))));
    }

    /**
     * @dev Same as {get}, with a custom error message when `key` is not in the map.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryGet}.
     */
    function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
        return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage))));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    /**
     * @dev Converts a `uint256` to its ASCII `string` representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        uint256 index = digits - 1;
        temp = value;
        while (temp != 0) {
            buffer[index--] = bytes1(uint8(48 + temp % 10));
            temp /= 10;
        }
        return string(buffer);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;

import "./interfaces/ISwap.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";

/**
 * @title SwapMigrator
 * @notice This contract is responsible for migrating old USD pool liquidity to the new ones.
 * Users can use this contract to remove their liquidity from the old pools and add them to the new
 * ones with a single transaction.
 */
contract SwapMigrator {
    using SafeERC20 for IERC20;

    struct MigrationData {
        address oldPoolAddress;
        IERC20 oldPoolLPTokenAddress;
        address newPoolAddress;
        IERC20 newPoolLPTokenAddress;
        IERC20[] underlyingTokens;
    }

    MigrationData public usdPoolMigrationData;
    address public owner;

    uint256 private constant MAX_UINT256 = 2**256 - 1;

    /**
     * @notice Sets the storage variables and approves tokens to be used by the old and new swap contracts
     * @param usdData_ MigrationData struct with information about old and new USD pools
     * @param owner_ owner that is allowed to call the `rescue()` function
     */
    constructor(MigrationData memory usdData_, address owner_) public {
        // Approve old USD LP Token to be used by the old USD pool
        usdData_.oldPoolLPTokenAddress.approve(
            usdData_.oldPoolAddress,
            MAX_UINT256
        );

        // Approve USD tokens to be used by the new USD pool
        for (uint256 i = 0; i < usdData_.underlyingTokens.length; i++) {
            usdData_.underlyingTokens[i].safeApprove(
                usdData_.newPoolAddress,
                MAX_UINT256
            );
        }

        // Set storage variables
        usdPoolMigrationData = usdData_;
        owner = owner_;
    }

    /**
     * @notice Migrates old USD pool's LPToken to the new pool
     * @param amount Amount of old LPToken to migrate
     * @param minAmount Minimum amount of new LPToken to receive
     */
    function migrateUSDPool(uint256 amount, uint256 minAmount)
        external
        returns (uint256)
    {
        // Transfer old LP token from the caller
        usdPoolMigrationData.oldPoolLPTokenAddress.safeTransferFrom(
            msg.sender,
            address(this),
            amount
        );

        // Remove liquidity from the old pool and add them to the new pool
        uint256[] memory amounts = ISwap(usdPoolMigrationData.oldPoolAddress)
            .removeLiquidity(
                amount,
                new uint256[](usdPoolMigrationData.underlyingTokens.length),
                MAX_UINT256
            );
        uint256 mintedAmount = ISwap(usdPoolMigrationData.newPoolAddress)
            .addLiquidity(amounts, minAmount, MAX_UINT256);

        // Transfer new LP Token to the caller
        usdPoolMigrationData.newPoolLPTokenAddress.safeTransfer(
            msg.sender,
            mintedAmount
        );
        return mintedAmount;
    }

    /**
     * @notice Rescues any token that may be sent to this contract accidentally.
     * @param token Amount of old LPToken to migrate
     * @param to Minimum amount of new LPToken to receive
     */
    function rescue(IERC20 token, address to) external {
        require(msg.sender == owner, "is not owner");
        token.safeTransfer(to, token.balanceOf(address(this)));
    }
}

// SPDX-License-Identifier: MIT

// Generalized and adapted from https://github.com/k06a/Unipool 🙇

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";

/**
 * @title StakeableTokenWrapper
 * @notice A wrapper for an ERC-20 that can be staked and withdrawn.
 * @dev In this contract, staked tokens don't do anything- instead other
 * contracts can inherit from this one to add functionality.
 */
contract StakeableTokenWrapper {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;

    uint256 public totalSupply;
    IERC20 public stakedToken;
    mapping(address => uint256) private _balances;

    event Staked(address indexed user, uint256 amount);
    event Withdrawn(address indexed user, uint256 amount);

    /**
     * @notice Creates a new StakeableTokenWrapper with given `_stakedToken` address
     * @param _stakedToken address of a token that will be used to stake
     */
    constructor(IERC20 _stakedToken) public {
        stakedToken = _stakedToken;
    }

    /**
     * @notice Read how much `account` has staked in this contract
     * @param account address of an account
     * @return amount of total staked ERC20(this.stakedToken) by `account`
     */
    function balanceOf(address account) external view returns (uint256) {
        return _balances[account];
    }

    /**
     * @notice Stakes given `amount` in this contract
     * @param amount amount of ERC20(this.stakedToken) to stake
     */
    function stake(uint256 amount) external {
        require(amount != 0, "amount == 0");
        totalSupply = totalSupply.add(amount);
        _balances[msg.sender] = _balances[msg.sender].add(amount);
        stakedToken.safeTransferFrom(msg.sender, address(this), amount);
        emit Staked(msg.sender, amount);
    }

    /**
     * @notice Withdraws given `amount` from this contract
     * @param amount amount of ERC20(this.stakedToken) to withdraw
     */
    function withdraw(uint256 amount) external {
        totalSupply = totalSupply.sub(amount);
        _balances[msg.sender] = _balances[msg.sender].sub(amount);
        stakedToken.safeTransfer(msg.sender, amount);
        emit Withdrawn(msg.sender, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "../interfaces/IFlashLoanReceiver.sol";
import "../interfaces/ISwapFlashLoan.sol";
import "hardhat/console.sol";

contract FlashLoanBorrowerExample is IFlashLoanReceiver {
    using SafeMath for uint256;

    // Typical executeOperation function should do the 3 following actions
    // 1. Check if the flashLoan was successful
    // 2. Do actions with the borrowed tokens
    // 3. Repay the debt to the `pool`
    function executeOperation(
        address pool,
        address token,
        uint256 amount,
        uint256 fee,
        bytes calldata params
    ) external override {
        // 1. Check if the flashLoan was valid
        require(
            IERC20(token).balanceOf(address(this)) >= amount,
            "flashloan is broken?"
        );

        // 2. Do actions with the borrowed token
        bytes32 paramsHash = keccak256(params);
        if (paramsHash == keccak256(bytes("dontRepayDebt"))) {
            return;
        } else if (paramsHash == keccak256(bytes("reentrancy_addLiquidity"))) {
            ISwapFlashLoan(pool).addLiquidity(
                new uint256[](0),
                0,
                block.timestamp
            );
        } else if (paramsHash == keccak256(bytes("reentrancy_swap"))) {
            ISwapFlashLoan(pool).swap(1, 0, 1e6, 0, now);
        } else if (
            paramsHash == keccak256(bytes("reentrancy_removeLiquidity"))
        ) {
            ISwapFlashLoan(pool).removeLiquidity(1e18, new uint256[](0), now);
        } else if (
            paramsHash == keccak256(bytes("reentrancy_removeLiquidityOneToken"))
        ) {
            ISwapFlashLoan(pool).removeLiquidityOneToken(1e18, 0, 1e18, now);
        }

        // 3. Payback debt
        uint256 totalDebt = amount.add(fee);
        IERC20(token).transfer(pool, totalDebt);
    }

    function flashLoan(
        ISwapFlashLoan swap,
        IERC20 token,
        uint256 amount,
        bytes memory params
    ) external {
        swap.flashLoan(address(this), token, amount, params);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "./ISwap.sol";

interface ISwapFlashLoan is ISwap {
    function flashLoan(
        address receiver,
        IERC20 token,
        uint256 amount,
        bytes memory params
    ) external;
}

// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;

library console {
	address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);

	function _sendLogPayload(bytes memory payload) private view {
		uint256 payloadLength = payload.length;
		address consoleAddress = CONSOLE_ADDRESS;
		assembly {
			let payloadStart := add(payload, 32)
			let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
		}
	}

	function log() internal view {
		_sendLogPayload(abi.encodeWithSignature("log()"));
	}

	function logInt(int p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
	}

	function logUint(uint p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
	}

	function logString(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function logBool(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function logAddress(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function logBytes(bytes memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
	}

	function logBytes1(bytes1 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
	}

	function logBytes2(bytes2 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
	}

	function logBytes3(bytes3 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
	}

	function logBytes4(bytes4 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
	}

	function logBytes5(bytes5 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
	}

	function logBytes6(bytes6 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
	}

	function logBytes7(bytes7 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
	}

	function logBytes8(bytes8 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
	}

	function logBytes9(bytes9 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
	}

	function logBytes10(bytes10 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
	}

	function logBytes11(bytes11 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
	}

	function logBytes12(bytes12 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
	}

	function logBytes13(bytes13 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
	}

	function logBytes14(bytes14 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
	}

	function logBytes15(bytes15 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
	}

	function logBytes16(bytes16 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
	}

	function logBytes17(bytes17 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
	}

	function logBytes18(bytes18 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
	}

	function logBytes19(bytes19 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
	}

	function logBytes20(bytes20 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
	}

	function logBytes21(bytes21 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
	}

	function logBytes22(bytes22 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
	}

	function logBytes23(bytes23 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
	}

	function logBytes24(bytes24 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
	}

	function logBytes25(bytes25 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
	}

	function logBytes26(bytes26 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
	}

	function logBytes27(bytes27 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
	}

	function logBytes28(bytes28 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
	}

	function logBytes29(bytes29 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
	}

	function logBytes30(bytes30 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
	}

	function logBytes31(bytes31 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
	}

	function logBytes32(bytes32 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
	}

	function log(uint p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
	}

	function log(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function log(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function log(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function log(uint p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
	}

	function log(uint p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
	}

	function log(uint p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
	}

	function log(uint p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
	}

	function log(string memory p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
	}

	function log(string memory p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
	}

	function log(string memory p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
	}

	function log(string memory p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
	}

	function log(bool p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
	}

	function log(bool p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
	}

	function log(bool p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
	}

	function log(bool p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
	}

	function log(address p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
	}

	function log(address p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
	}

	function log(address p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
	}

	function log(address p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
	}

	function log(uint p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
	}

	function log(uint p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
	}

	function log(uint p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
	}

	function log(uint p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
	}

	function log(uint p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
	}

	function log(uint p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
	}

	function log(uint p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
	}

	function log(uint p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
	}

	function log(uint p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
	}

	function log(uint p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
	}

	function log(uint p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
	}

	function log(uint p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
	}

	function log(string memory p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
	}

	function log(string memory p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
	}

	function log(string memory p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
	}

	function log(string memory p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
	}

	function log(bool p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
	}

	function log(bool p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
	}

	function log(bool p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
	}

	function log(bool p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
	}

	function log(bool p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
	}

	function log(bool p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
	}

	function log(bool p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
	}

	function log(bool p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
	}

	function log(bool p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
	}

	function log(bool p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
	}

	function log(bool p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
	}

	function log(bool p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
	}

	function log(address p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
	}

	function log(address p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
	}

	function log(address p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
	}

	function log(address p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
	}

	function log(address p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
	}

	function log(address p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
	}

	function log(address p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
	}

	function log(address p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
	}

	function log(address p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
	}

	function log(address p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
	}

	function log(address p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
	}

	function log(address p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
	}

	function log(address p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
	}

	function log(address p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
	}

	function log(address p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
	}

	function log(address p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
	}

	function log(uint p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
	}

}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "../../interfaces/ISwap.sol";
import "hardhat/console.sol";

contract TestSwapReturnValues {
    using SafeMath for uint256;

    ISwap public swap;
    IERC20 public lpToken;
    uint8 public n;

    uint256 public constant MAX_INT = 2**256 - 1;

    constructor(
        ISwap swapContract,
        IERC20 lpTokenContract,
        uint8 numOfTokens
    ) public {
        swap = swapContract;
        lpToken = lpTokenContract;
        n = numOfTokens;

        // Pre-approve tokens
        for (uint8 i; i < n; i++) {
            swap.getToken(i).approve(address(swap), MAX_INT);
        }
        lpToken.approve(address(swap), MAX_INT);
    }

    function test_swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy
    ) public {
        uint256 balanceBefore = swap.getToken(tokenIndexTo).balanceOf(
            address(this)
        );
        uint256 returnValue = swap.swap(
            tokenIndexFrom,
            tokenIndexTo,
            dx,
            minDy,
            block.timestamp
        );
        uint256 balanceAfter = swap.getToken(tokenIndexTo).balanceOf(
            address(this)
        );

        console.log(
            "swap: Expected %s, got %s",
            balanceAfter.sub(balanceBefore),
            returnValue
        );

        require(
            returnValue == balanceAfter.sub(balanceBefore),
            "swap()'s return value does not match received amount"
        );
    }

    function test_addLiquidity(uint256[] calldata amounts, uint256 minToMint)
        public
    {
        uint256 balanceBefore = lpToken.balanceOf(address(this));
        uint256 returnValue = swap.addLiquidity(amounts, minToMint, MAX_INT);
        uint256 balanceAfter = lpToken.balanceOf(address(this));

        console.log(
            "addLiquidity: Expected %s, got %s",
            balanceAfter.sub(balanceBefore),
            returnValue
        );

        require(
            returnValue == balanceAfter.sub(balanceBefore),
            "addLiquidity()'s return value does not match minted amount"
        );
    }

    function test_removeLiquidity(uint256 amount, uint256[] memory minAmounts)
        public
    {
        uint256[] memory balanceBefore = new uint256[](n);
        uint256[] memory balanceAfter = new uint256[](n);

        for (uint8 i = 0; i < n; i++) {
            balanceBefore[i] = swap.getToken(i).balanceOf(address(this));
        }

        uint256[] memory returnValue = swap.removeLiquidity(
            amount,
            minAmounts,
            MAX_INT
        );

        for (uint8 i = 0; i < n; i++) {
            balanceAfter[i] = swap.getToken(i).balanceOf(address(this));
            console.log(
                "removeLiquidity: Expected %s, got %s",
                balanceAfter[i].sub(balanceBefore[i]),
                returnValue[i]
            );
            require(
                balanceAfter[i].sub(balanceBefore[i]) == returnValue[i],
                "removeLiquidity()'s return value does not match received amounts of tokens"
            );
        }
    }

    function test_removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount
    ) public {
        uint256 balanceBefore = lpToken.balanceOf(address(this));
        uint256 returnValue = swap.removeLiquidityImbalance(
            amounts,
            maxBurnAmount,
            MAX_INT
        );
        uint256 balanceAfter = lpToken.balanceOf(address(this));

        console.log(
            "removeLiquidityImbalance: Expected %s, got %s",
            balanceBefore.sub(balanceAfter),
            returnValue
        );

        require(
            returnValue == balanceBefore.sub(balanceAfter),
            "removeLiquidityImbalance()'s return value does not match burned lpToken amount"
        );
    }

    function test_removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount
    ) public {
        uint256 balanceBefore = swap.getToken(tokenIndex).balanceOf(
            address(this)
        );
        uint256 returnValue = swap.removeLiquidityOneToken(
            tokenAmount,
            tokenIndex,
            minAmount,
            MAX_INT
        );
        uint256 balanceAfter = swap.getToken(tokenIndex).balanceOf(
            address(this)
        );

        console.log(
            "removeLiquidityOneToken: Expected %s, got %s",
            balanceAfter.sub(balanceBefore),
            returnValue
        );

        require(
            returnValue == balanceAfter.sub(balanceBefore),
            "removeLiquidityOneToken()'s return value does not match received token amount"
        );
    }
}

// SPDX-License-Identifier: MIT

// https://etherscan.io/address/0x2b7a5a5923eca5c00c6572cf3e8e08384f563f93#code

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./LPTokenGuarded.sol";
import "../MathUtils.sol";

/**
 * @title SwapUtils library
 * @notice A library to be used within Swap.sol. Contains functions responsible for custody and AMM functionalities.
 * @dev Contracts relying on this library must initialize SwapUtils.Swap struct then use this library
 * for SwapUtils.Swap struct. Note that this library contains both functions called by users and admins.
 * Admin functions should be protected within contracts using this library.
 */
library SwapUtilsGuarded {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;
    using MathUtils for uint256;

    /*** EVENTS ***/

    event TokenSwap(
        address indexed buyer,
        uint256 tokensSold,
        uint256 tokensBought,
        uint128 soldId,
        uint128 boughtId
    );
    event AddLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event RemoveLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256 lpTokenSupply
    );
    event RemoveLiquidityOne(
        address indexed provider,
        uint256 lpTokenAmount,
        uint256 lpTokenSupply,
        uint256 boughtId,
        uint256 tokensBought
    );
    event RemoveLiquidityImbalance(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event NewAdminFee(uint256 newAdminFee);
    event NewSwapFee(uint256 newSwapFee);
    event NewWithdrawFee(uint256 newWithdrawFee);
    event RampA(
        uint256 oldA,
        uint256 newA,
        uint256 initialTime,
        uint256 futureTime
    );
    event StopRampA(uint256 currentA, uint256 time);

    struct Swap {
        // variables around the ramp management of A,
        // the amplification coefficient * n * (n - 1)
        // see https://www.curve.fi/stableswap-paper.pdf for details
        uint256 initialA;
        uint256 futureA;
        uint256 initialATime;
        uint256 futureATime;
        // fee calculation
        uint256 swapFee;
        uint256 adminFee;
        uint256 defaultWithdrawFee;
        LPTokenGuarded lpToken;
        // contract references for all tokens being pooled
        IERC20[] pooledTokens;
        // multipliers for each pooled token's precision to get to POOL_PRECISION_DECIMALS
        // for example, TBTC has 18 decimals, so the multiplier should be 1. WBTC
        // has 8, so the multiplier should be 10 ** 18 / 10 ** 8 => 10 ** 10
        uint256[] tokenPrecisionMultipliers;
        // the pool balance of each token, in the token's precision
        // the contract's actual token balance might differ
        uint256[] balances;
        mapping(address => uint256) depositTimestamp;
        mapping(address => uint256) withdrawFeeMultiplier;
    }

    // Struct storing variables used in calculations in the
    // calculateWithdrawOneTokenDY function to avoid stack too deep errors
    struct CalculateWithdrawOneTokenDYInfo {
        uint256 d0;
        uint256 d1;
        uint256 newY;
        uint256 feePerToken;
        uint256 preciseA;
    }

    // Struct storing variables used in calculation in addLiquidity function
    // to avoid stack too deep error
    struct AddLiquidityInfo {
        uint256 d0;
        uint256 d1;
        uint256 d2;
        uint256 preciseA;
    }

    // Struct storing variables used in calculation in removeLiquidityImbalance function
    // to avoid stack too deep error
    struct RemoveLiquidityImbalanceInfo {
        uint256 d0;
        uint256 d1;
        uint256 d2;
        uint256 preciseA;
    }

    // the precision all pools tokens will be converted to
    uint8 public constant POOL_PRECISION_DECIMALS = 18;

    // the denominator used to calculate admin and LP fees. For example, an
    // LP fee might be something like tradeAmount.mul(fee).div(FEE_DENOMINATOR)
    uint256 private constant FEE_DENOMINATOR = 10**10;

    // Max swap fee is 1% or 100bps of each swap
    uint256 public constant MAX_SWAP_FEE = 10**8;

    // Max adminFee is 100% of the swapFee
    // adminFee does not add additional fee on top of swapFee
    // Instead it takes a certain % of the swapFee. Therefore it has no impact on the
    // users but only on the earnings of LPs
    uint256 public constant MAX_ADMIN_FEE = 10**10;

    // Max withdrawFee is 1% of the value withdrawn
    // Fee will be redistributed to the LPs in the pool, rewarding
    // long term providers.
    uint256 public constant MAX_WITHDRAW_FEE = 10**8;

    // Constant value used as max loop limit
    uint256 private constant MAX_LOOP_LIMIT = 256;

    // Constant values used in ramping A calculations
    uint256 public constant A_PRECISION = 100;
    uint256 public constant MAX_A = 10**6;
    uint256 private constant MAX_A_CHANGE = 2;
    uint256 private constant MIN_RAMP_TIME = 14 days;

    /*** VIEW & PURE FUNCTIONS ***/

    /**
     * @notice Return A, the amplification coefficient * n * (n - 1)
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter
     */
    function getA(Swap storage self) external view returns (uint256) {
        return _getA(self);
    }

    /**
     * @notice Return A, the amplification coefficient * n * (n - 1)
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter
     */
    function _getA(Swap storage self) internal view returns (uint256) {
        return _getAPrecise(self).div(A_PRECISION);
    }

    /**
     * @notice Return A in its raw precision
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter in its raw precision form
     */
    function getAPrecise(Swap storage self) external view returns (uint256) {
        return _getAPrecise(self);
    }

    /**
     * @notice Calculates and returns A based on the ramp settings
     * @dev See the StableSwap paper for details
     * @param self Swap struct to read from
     * @return A parameter in its raw precision form
     */
    function _getAPrecise(Swap storage self) internal view returns (uint256) {
        uint256 t1 = self.futureATime; // time when ramp is finished
        uint256 a1 = self.futureA; // final A value when ramp is finished

        if (block.timestamp < t1) {
            uint256 t0 = self.initialATime; // time when ramp is started
            uint256 a0 = self.initialA; // initial A value when ramp is started
            if (a1 > a0) {
                // a0 + (a1 - a0) * (block.timestamp - t0) / (t1 - t0)
                return
                    a0.add(
                        a1.sub(a0).mul(block.timestamp.sub(t0)).div(t1.sub(t0))
                    );
            } else {
                // a0 - (a0 - a1) * (block.timestamp - t0) / (t1 - t0)
                return
                    a0.sub(
                        a0.sub(a1).mul(block.timestamp.sub(t0)).div(t1.sub(t0))
                    );
            }
        } else {
            return a1;
        }
    }

    /**
     * @notice Retrieves the timestamp of last deposit made by the given address
     * @param self Swap struct to read from
     * @return timestamp of last deposit
     */
    function getDepositTimestamp(Swap storage self, address user)
        external
        view
        returns (uint256)
    {
        return self.depositTimestamp[user];
    }

    /**
     * @notice Calculate the dy, the amount of selected token that user receives and
     * the fee of withdrawing in one token
     * @param account the address that is withdrawing
     * @param tokenAmount the amount to withdraw in the pool's precision
     * @param tokenIndex which token will be withdrawn
     * @param self Swap struct to read from
     * @return the amount of token user will receive and the associated swap fee
     */
    function calculateWithdrawOneToken(
        Swap storage self,
        address account,
        uint256 tokenAmount,
        uint8 tokenIndex
    ) public view returns (uint256, uint256) {
        uint256 dy;
        uint256 newY;

        (dy, newY) = calculateWithdrawOneTokenDY(self, tokenIndex, tokenAmount);

        // dy_0 (without fees)
        // dy, dy_0 - dy

        uint256 dySwapFee = _xp(self)[tokenIndex]
            .sub(newY)
            .div(self.tokenPrecisionMultipliers[tokenIndex])
            .sub(dy);

        dy = dy
            .mul(
                FEE_DENOMINATOR.sub(calculateCurrentWithdrawFee(self, account))
            )
            .div(FEE_DENOMINATOR);

        return (dy, dySwapFee);
    }

    /**
     * @notice Calculate the dy of withdrawing in one token
     * @param self Swap struct to read from
     * @param tokenIndex which token will be withdrawn
     * @param tokenAmount the amount to withdraw in the pools precision
     * @return the d and the new y after withdrawing one token
     */
    function calculateWithdrawOneTokenDY(
        Swap storage self,
        uint8 tokenIndex,
        uint256 tokenAmount
    ) internal view returns (uint256, uint256) {
        require(
            tokenIndex < self.pooledTokens.length,
            "Token index out of range"
        );

        // Get the current D, then solve the stableswap invariant
        // y_i for D - tokenAmount
        uint256[] memory xp = _xp(self);
        CalculateWithdrawOneTokenDYInfo
            memory v = CalculateWithdrawOneTokenDYInfo(0, 0, 0, 0, 0);
        v.preciseA = _getAPrecise(self);
        v.d0 = getD(xp, v.preciseA);
        v.d1 = v.d0.sub(tokenAmount.mul(v.d0).div(self.lpToken.totalSupply()));

        require(tokenAmount <= xp[tokenIndex], "Withdraw exceeds available");

        v.newY = getYD(v.preciseA, tokenIndex, xp, v.d1);

        uint256[] memory xpReduced = new uint256[](xp.length);

        v.feePerToken = _feePerToken(self);
        for (uint256 i = 0; i < self.pooledTokens.length; i++) {
            uint256 xpi = xp[i];
            // if i == tokenIndex, dxExpected = xp[i] * d1 / d0 - newY
            // else dxExpected = xp[i] - (xp[i] * d1 / d0)
            // xpReduced[i] -= dxExpected * fee / FEE_DENOMINATOR
            xpReduced[i] = xpi.sub(
                (
                    (i == tokenIndex)
                        ? xpi.mul(v.d1).div(v.d0).sub(v.newY)
                        : xpi.sub(xpi.mul(v.d1).div(v.d0))
                ).mul(v.feePerToken).div(FEE_DENOMINATOR)
            );
        }

        uint256 dy = xpReduced[tokenIndex].sub(
            getYD(v.preciseA, tokenIndex, xpReduced, v.d1)
        );
        dy = dy.sub(1).div(self.tokenPrecisionMultipliers[tokenIndex]);

        return (dy, v.newY);
    }

    /**
     * @notice Calculate the price of a token in the pool with given
     * precision-adjusted balances and a particular D.
     *
     * @dev This is accomplished via solving the invariant iteratively.
     * See the StableSwap paper and Curve.fi implementation for further details.
     *
     * x_1**2 + x1 * (sum' - (A*n**n - 1) * D / (A * n**n)) = D ** (n + 1) / (n ** (2 * n) * prod' * A)
     * x_1**2 + b*x_1 = c
     * x_1 = (x_1**2 + c) / (2*x_1 + b)
     *
     * @param a the amplification coefficient * n * (n - 1). See the StableSwap paper for details.
     * @param tokenIndex Index of token we are calculating for.
     * @param xp a precision-adjusted set of pool balances. Array should be
     * the same cardinality as the pool.
     * @param d the stableswap invariant
     * @return the price of the token, in the same precision as in xp
     */
    function getYD(
        uint256 a,
        uint8 tokenIndex,
        uint256[] memory xp,
        uint256 d
    ) internal pure returns (uint256) {
        uint256 numTokens = xp.length;
        require(tokenIndex < numTokens, "Token not found");

        uint256 c = d;
        uint256 s;
        uint256 nA = a.mul(numTokens);

        for (uint256 i = 0; i < numTokens; i++) {
            if (i != tokenIndex) {
                s = s.add(xp[i]);
                c = c.mul(d).div(xp[i].mul(numTokens));
                // If we were to protect the division loss we would have to keep the denominator separate
                // and divide at the end. However this leads to overflow with large numTokens or/and D.
                // c = c * D * D * D * ... overflow!
            }
        }
        c = c.mul(d).mul(A_PRECISION).div(nA.mul(numTokens));

        uint256 b = s.add(d.mul(A_PRECISION).div(nA));
        uint256 yPrev;
        uint256 y = d;
        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {
            yPrev = y;
            y = y.mul(y).add(c).div(y.mul(2).add(b).sub(d));
            if (y.within1(yPrev)) {
                return y;
            }
        }
        revert("Approximation did not converge");
    }

    /**
     * @notice Get D, the StableSwap invariant, based on a set of balances and a particular A.
     * @param xp a precision-adjusted set of pool balances. Array should be the same cardinality
     * as the pool.
     * @param a the amplification coefficient * n * (n - 1) in A_PRECISION.
     * See the StableSwap paper for details
     * @return the invariant, at the precision of the pool
     */
    function getD(uint256[] memory xp, uint256 a)
        internal
        pure
        returns (uint256)
    {
        uint256 numTokens = xp.length;
        uint256 s;
        for (uint256 i = 0; i < numTokens; i++) {
            s = s.add(xp[i]);
        }
        if (s == 0) {
            return 0;
        }

        uint256 prevD;
        uint256 d = s;
        uint256 nA = a.mul(numTokens);

        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {
            uint256 dP = d;
            for (uint256 j = 0; j < numTokens; j++) {
                dP = dP.mul(d).div(xp[j].mul(numTokens));
                // If we were to protect the division loss we would have to keep the denominator separate
                // and divide at the end. However this leads to overflow with large numTokens or/and D.
                // dP = dP * D * D * D * ... overflow!
            }
            prevD = d;
            d = nA.mul(s).div(A_PRECISION).add(dP.mul(numTokens)).mul(d).div(
                nA.sub(A_PRECISION).mul(d).div(A_PRECISION).add(
                    numTokens.add(1).mul(dP)
                )
            );
            if (d.within1(prevD)) {
                return d;
            }
        }

        // Convergence should occur in 4 loops or less. If this is reached, there may be something wrong
        // with the pool. If this were to occur repeatedly, LPs should withdraw via `removeLiquidity()`
        // function which does not rely on D.
        revert("D does not converge");
    }

    /**
     * @notice Get D, the StableSwap invariant, based on self Swap struct
     * @param self Swap struct to read from
     * @return The invariant, at the precision of the pool
     */
    function getD(Swap storage self) internal view returns (uint256) {
        return getD(_xp(self), _getAPrecise(self));
    }

    /**
     * @notice Given a set of balances and precision multipliers, return the
     * precision-adjusted balances.
     *
     * @param balances an array of token balances, in their native precisions.
     * These should generally correspond with pooled tokens.
     *
     * @param precisionMultipliers an array of multipliers, corresponding to
     * the amounts in the balances array. When multiplied together they
     * should yield amounts at the pool's precision.
     *
     * @return an array of amounts "scaled" to the pool's precision
     */
    function _xp(
        uint256[] memory balances,
        uint256[] memory precisionMultipliers
    ) internal pure returns (uint256[] memory) {
        uint256 numTokens = balances.length;
        require(
            numTokens == precisionMultipliers.length,
            "Balances must match multipliers"
        );
        uint256[] memory xp = new uint256[](numTokens);
        for (uint256 i = 0; i < numTokens; i++) {
            xp[i] = balances[i].mul(precisionMultipliers[i]);
        }
        return xp;
    }

    /**
     * @notice Return the precision-adjusted balances of all tokens in the pool
     * @param self Swap struct to read from
     * @param balances array of balances to scale
     * @return balances array "scaled" to the pool's precision, allowing
     * them to be more easily compared.
     */
    function _xp(Swap storage self, uint256[] memory balances)
        internal
        view
        returns (uint256[] memory)
    {
        return _xp(balances, self.tokenPrecisionMultipliers);
    }

    /**
     * @notice Return the precision-adjusted balances of all tokens in the pool
     * @param self Swap struct to read from
     * @return the pool balances "scaled" to the pool's precision, allowing
     * them to be more easily compared.
     */
    function _xp(Swap storage self) internal view returns (uint256[] memory) {
        return _xp(self.balances, self.tokenPrecisionMultipliers);
    }

    /**
     * @notice Get the virtual price, to help calculate profit
     * @param self Swap struct to read from
     * @return the virtual price, scaled to precision of POOL_PRECISION_DECIMALS
     */
    function getVirtualPrice(Swap storage self)
        external
        view
        returns (uint256)
    {
        uint256 d = getD(_xp(self), _getAPrecise(self));
        uint256 supply = self.lpToken.totalSupply();
        if (supply > 0) {
            return
                d.mul(10**uint256(ERC20(self.lpToken).decimals())).div(supply);
        }
        return 0;
    }

    /**
     * @notice Calculate the new balances of the tokens given the indexes of the token
     * that is swapped from (FROM) and the token that is swapped to (TO).
     * This function is used as a helper function to calculate how much TO token
     * the user should receive on swap.
     *
     * @param self Swap struct to read from
     * @param tokenIndexFrom index of FROM token
     * @param tokenIndexTo index of TO token
     * @param x the new total amount of FROM token
     * @param xp balances of the tokens in the pool
     * @return the amount of TO token that should remain in the pool
     */
    function getY(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 x,
        uint256[] memory xp
    ) internal view returns (uint256) {
        uint256 numTokens = self.pooledTokens.length;
        require(
            tokenIndexFrom != tokenIndexTo,
            "Can't compare token to itself"
        );
        require(
            tokenIndexFrom < numTokens && tokenIndexTo < numTokens,
            "Tokens must be in pool"
        );

        uint256 a = _getAPrecise(self);
        uint256 d = getD(xp, a);
        uint256 c = d;
        uint256 s;
        uint256 nA = numTokens.mul(a);

        uint256 _x;
        for (uint256 i = 0; i < numTokens; i++) {
            if (i == tokenIndexFrom) {
                _x = x;
            } else if (i != tokenIndexTo) {
                _x = xp[i];
            } else {
                continue;
            }
            s = s.add(_x);
            c = c.mul(d).div(_x.mul(numTokens));
            // If we were to protect the division loss we would have to keep the denominator separate
            // and divide at the end. However this leads to overflow with large numTokens or/and D.
            // c = c * D * D * D * ... overflow!
        }
        c = c.mul(d).mul(A_PRECISION).div(nA.mul(numTokens));
        uint256 b = s.add(d.mul(A_PRECISION).div(nA));
        uint256 yPrev;
        uint256 y = d;

        // iterative approximation
        for (uint256 i = 0; i < MAX_LOOP_LIMIT; i++) {
            yPrev = y;
            y = y.mul(y).add(c).div(y.mul(2).add(b).sub(d));
            if (y.within1(yPrev)) {
                return y;
            }
        }
        revert("Approximation did not converge");
    }

    /**
     * @notice Externally calculates a swap between two tokens.
     * @param self Swap struct to read from
     * @param tokenIndexFrom the token to sell
     * @param tokenIndexTo the token to buy
     * @param dx the number of tokens to sell. If the token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @return dy the number of tokens the user will get
     */
    function calculateSwap(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256 dy) {
        (dy, ) = _calculateSwap(self, tokenIndexFrom, tokenIndexTo, dx);
    }

    /**
     * @notice Internally calculates a swap between two tokens.
     *
     * @dev The caller is expected to transfer the actual amounts (dx and dy)
     * using the token contracts.
     *
     * @param self Swap struct to read from
     * @param tokenIndexFrom the token to sell
     * @param tokenIndexTo the token to buy
     * @param dx the number of tokens to sell. If the token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @return dy the number of tokens the user will get
     * @return dyFee the associated fee
     */
    function _calculateSwap(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) internal view returns (uint256 dy, uint256 dyFee) {
        uint256[] memory xp = _xp(self);
        require(
            tokenIndexFrom < xp.length && tokenIndexTo < xp.length,
            "Token index out of range"
        );
        uint256 x = dx.mul(self.tokenPrecisionMultipliers[tokenIndexFrom]).add(
            xp[tokenIndexFrom]
        );
        uint256 y = getY(self, tokenIndexFrom, tokenIndexTo, x, xp);
        dy = xp[tokenIndexTo].sub(y).sub(1);
        dyFee = dy.mul(self.swapFee).div(FEE_DENOMINATOR);
        dy = dy.sub(dyFee).div(self.tokenPrecisionMultipliers[tokenIndexTo]);
    }

    /**
     * @notice A simple method to calculate amount of each underlying
     * tokens that is returned upon burning given amount of
     * LP tokens
     *
     * @param account the address that is removing liquidity. required for withdraw fee calculation
     * @param amount the amount of LP tokens that would to be burned on
     * withdrawal
     * @return array of amounts of tokens user will receive
     */
    function calculateRemoveLiquidity(
        Swap storage self,
        address account,
        uint256 amount
    ) external view returns (uint256[] memory) {
        return _calculateRemoveLiquidity(self, account, amount);
    }

    function _calculateRemoveLiquidity(
        Swap storage self,
        address account,
        uint256 amount
    ) internal view returns (uint256[] memory) {
        uint256 totalSupply = self.lpToken.totalSupply();
        require(amount <= totalSupply, "Cannot exceed total supply");

        uint256 feeAdjustedAmount = amount
            .mul(
                FEE_DENOMINATOR.sub(calculateCurrentWithdrawFee(self, account))
            )
            .div(FEE_DENOMINATOR);

        uint256[] memory amounts = new uint256[](self.pooledTokens.length);

        for (uint256 i = 0; i < self.pooledTokens.length; i++) {
            amounts[i] = self.balances[i].mul(feeAdjustedAmount).div(
                totalSupply
            );
        }
        return amounts;
    }

    /**
     * @notice Calculate the fee that is applied when the given user withdraws.
     * Withdraw fee decays linearly over 4 weeks.
     * @param user address you want to calculate withdraw fee of
     * @return current withdraw fee of the user
     */
    function calculateCurrentWithdrawFee(Swap storage self, address user)
        public
        view
        returns (uint256)
    {
        uint256 endTime = self.depositTimestamp[user].add(4 weeks);
        if (endTime > block.timestamp) {
            uint256 timeLeftover = endTime.sub(block.timestamp);
            return
                self
                    .defaultWithdrawFee
                    .mul(self.withdrawFeeMultiplier[user])
                    .mul(timeLeftover)
                    .div(4 weeks)
                    .div(FEE_DENOMINATOR);
        }
        return 0;
    }

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param self Swap struct to read from
     * @param account address of the account depositing or withdrawing tokens
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return if deposit was true, total amount of lp token that will be minted and if
     * deposit was false, total amount of lp token that will be burned
     */
    function calculateTokenAmount(
        Swap storage self,
        address account,
        uint256[] calldata amounts,
        bool deposit
    ) external view returns (uint256) {
        uint256 numTokens = self.pooledTokens.length;
        uint256 a = _getAPrecise(self);
        uint256 d0 = getD(_xp(self, self.balances), a);
        uint256[] memory balances1 = self.balances;
        for (uint256 i = 0; i < numTokens; i++) {
            if (deposit) {
                balances1[i] = balances1[i].add(amounts[i]);
            } else {
                balances1[i] = balances1[i].sub(
                    amounts[i],
                    "Cannot withdraw more than available"
                );
            }
        }
        uint256 d1 = getD(_xp(self, balances1), a);
        uint256 totalSupply = self.lpToken.totalSupply();

        if (deposit) {
            return d1.sub(d0).mul(totalSupply).div(d0);
        } else {
            return
                d0.sub(d1).mul(totalSupply).div(d0).mul(FEE_DENOMINATOR).div(
                    FEE_DENOMINATOR.sub(
                        calculateCurrentWithdrawFee(self, account)
                    )
                );
        }
    }

    /**
     * @notice return accumulated amount of admin fees of the token with given index
     * @param self Swap struct to read from
     * @param index Index of the pooled token
     * @return admin balance in the token's precision
     */
    function getAdminBalance(Swap storage self, uint256 index)
        external
        view
        returns (uint256)
    {
        require(index < self.pooledTokens.length, "Token index out of range");
        return
            self.pooledTokens[index].balanceOf(address(this)).sub(
                self.balances[index]
            );
    }

    /**
     * @notice internal helper function to calculate fee per token multiplier used in
     * swap fee calculations
     * @param self Swap struct to read from
     */
    function _feePerToken(Swap storage self) internal view returns (uint256) {
        return
            self.swapFee.mul(self.pooledTokens.length).div(
                self.pooledTokens.length.sub(1).mul(4)
            );
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice swap two tokens in the pool
     * @param self Swap struct to read from and write to
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell
     * @param minDy the min amount the user would like to receive, or revert.
     * @return amount of token user received on swap
     */
    function swap(
        Swap storage self,
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy
    ) external returns (uint256) {
        require(
            dx <= self.pooledTokens[tokenIndexFrom].balanceOf(msg.sender),
            "Cannot swap more than you own"
        );

        // Transfer tokens first to see if a fee was charged on transfer
        uint256 beforeBalance = self.pooledTokens[tokenIndexFrom].balanceOf(
            address(this)
        );
        self.pooledTokens[tokenIndexFrom].safeTransferFrom(
            msg.sender,
            address(this),
            dx
        );

        // Use the actual transferred amount for AMM math
        uint256 transferredDx = self
            .pooledTokens[tokenIndexFrom]
            .balanceOf(address(this))
            .sub(beforeBalance);

        (uint256 dy, uint256 dyFee) = _calculateSwap(
            self,
            tokenIndexFrom,
            tokenIndexTo,
            transferredDx
        );
        require(dy >= minDy, "Swap didn't result in min tokens");

        uint256 dyAdminFee = dyFee.mul(self.adminFee).div(FEE_DENOMINATOR).div(
            self.tokenPrecisionMultipliers[tokenIndexTo]
        );

        self.balances[tokenIndexFrom] = self.balances[tokenIndexFrom].add(
            transferredDx
        );
        self.balances[tokenIndexTo] = self.balances[tokenIndexTo].sub(dy).sub(
            dyAdminFee
        );

        self.pooledTokens[tokenIndexTo].safeTransfer(msg.sender, dy);

        emit TokenSwap(
            msg.sender,
            transferredDx,
            dy,
            tokenIndexFrom,
            tokenIndexTo
        );

        return dy;
    }

    /**
     * @notice Add liquidity to the pool
     * @param self Swap struct to read from and write to
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * @param merkleProof bytes32 array that will be used to prove the existence of the caller's address in the list of
     * allowed addresses. If the pool is not in the guarded launch phase, this parameter will be ignored.
     * @return amount of LP token user received
     */
    function addLiquidity(
        Swap storage self,
        uint256[] memory amounts,
        uint256 minToMint,
        bytes32[] calldata merkleProof
    ) external returns (uint256) {
        require(
            amounts.length == self.pooledTokens.length,
            "Amounts must match pooled tokens"
        );

        uint256[] memory fees = new uint256[](self.pooledTokens.length);

        // current state
        AddLiquidityInfo memory v = AddLiquidityInfo(0, 0, 0, 0);

        if (self.lpToken.totalSupply() != 0) {
            v.d0 = getD(self);
        }
        uint256[] memory newBalances = self.balances;

        for (uint256 i = 0; i < self.pooledTokens.length; i++) {
            require(
                self.lpToken.totalSupply() != 0 || amounts[i] > 0,
                "Must supply all tokens in pool"
            );

            // Transfer tokens first to see if a fee was charged on transfer
            if (amounts[i] != 0) {
                uint256 beforeBalance = self.pooledTokens[i].balanceOf(
                    address(this)
                );
                self.pooledTokens[i].safeTransferFrom(
                    msg.sender,
                    address(this),
                    amounts[i]
                );

                // Update the amounts[] with actual transfer amount
                amounts[i] = self.pooledTokens[i].balanceOf(address(this)).sub(
                    beforeBalance
                );
            }

            newBalances[i] = self.balances[i].add(amounts[i]);
        }

        // invariant after change
        v.preciseA = _getAPrecise(self);
        v.d1 = getD(_xp(self, newBalances), v.preciseA);
        require(v.d1 > v.d0, "D should increase");

        // updated to reflect fees and calculate the user's LP tokens
        v.d2 = v.d1;
        if (self.lpToken.totalSupply() != 0) {
            uint256 feePerToken = _feePerToken(self);
            for (uint256 i = 0; i < self.pooledTokens.length; i++) {
                uint256 idealBalance = v.d1.mul(self.balances[i]).div(v.d0);
                fees[i] = feePerToken
                    .mul(idealBalance.difference(newBalances[i]))
                    .div(FEE_DENOMINATOR);
                self.balances[i] = newBalances[i].sub(
                    fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)
                );
                newBalances[i] = newBalances[i].sub(fees[i]);
            }
            v.d2 = getD(_xp(self, newBalances), v.preciseA);
        } else {
            // the initial depositor doesn't pay fees
            self.balances = newBalances;
        }

        uint256 toMint;
        if (self.lpToken.totalSupply() == 0) {
            toMint = v.d1;
        } else {
            toMint = v.d2.sub(v.d0).mul(self.lpToken.totalSupply()).div(v.d0);
        }

        require(toMint >= minToMint, "Couldn't mint min requested");

        // mint the user's LP tokens
        self.lpToken.mint(msg.sender, toMint, merkleProof);

        emit AddLiquidity(
            msg.sender,
            amounts,
            fees,
            v.d1,
            self.lpToken.totalSupply()
        );

        return toMint;
    }

    /**
     * @notice Update the withdraw fee for `user`. If the user is currently
     * not providing liquidity in the pool, sets to default value. If not, recalculate
     * the starting withdraw fee based on the last deposit's time & amount relative
     * to the new deposit.
     *
     * @param self Swap struct to read from and write to
     * @param user address of the user depositing tokens
     * @param toMint amount of pool tokens to be minted
     */
    function updateUserWithdrawFee(
        Swap storage self,
        address user,
        uint256 toMint
    ) external {
        _updateUserWithdrawFee(self, user, toMint);
    }

    function _updateUserWithdrawFee(
        Swap storage self,
        address user,
        uint256 toMint
    ) internal {
        // If token is transferred to address 0 (or burned), don't update the fee.
        if (user == address(0)) {
            return;
        }
        if (self.defaultWithdrawFee == 0) {
            // If current fee is set to 0%, set multiplier to FEE_DENOMINATOR
            self.withdrawFeeMultiplier[user] = FEE_DENOMINATOR;
        } else {
            // Otherwise, calculate appropriate discount based on last deposit amount
            uint256 currentFee = calculateCurrentWithdrawFee(self, user);
            uint256 currentBalance = self.lpToken.balanceOf(user);

            // ((currentBalance * currentFee) + (toMint * defaultWithdrawFee)) * FEE_DENOMINATOR /
            // ((toMint + currentBalance) * defaultWithdrawFee)
            self.withdrawFeeMultiplier[user] = currentBalance
                .mul(currentFee)
                .add(toMint.mul(self.defaultWithdrawFee))
                .mul(FEE_DENOMINATOR)
                .div(toMint.add(currentBalance).mul(self.defaultWithdrawFee));
        }
        self.depositTimestamp[user] = block.timestamp;
    }

    /**
     * @notice Burn LP tokens to remove liquidity from the pool.
     * @dev Liquidity can always be removed, even when the pool is paused.
     * @param self Swap struct to read from and write to
     * @param amount the amount of LP tokens to burn
     * @param minAmounts the minimum amounts of each token in the pool
     * acceptable for this burn. Useful as a front-running mitigation
     * @return amounts of tokens the user received
     */
    function removeLiquidity(
        Swap storage self,
        uint256 amount,
        uint256[] calldata minAmounts
    ) external returns (uint256[] memory) {
        require(amount <= self.lpToken.balanceOf(msg.sender), ">LP.balanceOf");
        require(
            minAmounts.length == self.pooledTokens.length,
            "minAmounts must match poolTokens"
        );

        uint256[] memory amounts = _calculateRemoveLiquidity(
            self,
            msg.sender,
            amount
        );

        for (uint256 i = 0; i < amounts.length; i++) {
            require(amounts[i] >= minAmounts[i], "amounts[i] < minAmounts[i]");
            self.balances[i] = self.balances[i].sub(amounts[i]);
            self.pooledTokens[i].safeTransfer(msg.sender, amounts[i]);
        }

        self.lpToken.burnFrom(msg.sender, amount);

        emit RemoveLiquidity(msg.sender, amounts, self.lpToken.totalSupply());

        return amounts;
    }

    /**
     * @notice Remove liquidity from the pool all in one token.
     * @param self Swap struct to read from and write to
     * @param tokenAmount the amount of the lp tokens to burn
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @return amount chosen token that user received
     */
    function removeLiquidityOneToken(
        Swap storage self,
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount
    ) external returns (uint256) {
        uint256 totalSupply = self.lpToken.totalSupply();
        uint256 numTokens = self.pooledTokens.length;
        require(
            tokenAmount <= self.lpToken.balanceOf(msg.sender),
            ">LP.balanceOf"
        );
        require(tokenIndex < numTokens, "Token not found");

        uint256 dyFee;
        uint256 dy;

        (dy, dyFee) = calculateWithdrawOneToken(
            self,
            msg.sender,
            tokenAmount,
            tokenIndex
        );

        require(dy >= minAmount, "dy < minAmount");

        self.balances[tokenIndex] = self.balances[tokenIndex].sub(
            dy.add(dyFee.mul(self.adminFee).div(FEE_DENOMINATOR))
        );
        self.lpToken.burnFrom(msg.sender, tokenAmount);
        self.pooledTokens[tokenIndex].safeTransfer(msg.sender, dy);

        emit RemoveLiquidityOne(
            msg.sender,
            tokenAmount,
            totalSupply,
            tokenIndex,
            dy
        );

        return dy;
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances.
     *
     * @param self Swap struct to read from and write to
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @return actual amount of LP tokens burned in the withdrawal
     */
    function removeLiquidityImbalance(
        Swap storage self,
        uint256[] memory amounts,
        uint256 maxBurnAmount
    ) public returns (uint256) {
        require(
            amounts.length == self.pooledTokens.length,
            "Amounts should match pool tokens"
        );
        require(
            maxBurnAmount <= self.lpToken.balanceOf(msg.sender) &&
                maxBurnAmount != 0,
            ">LP.balanceOf"
        );

        RemoveLiquidityImbalanceInfo memory v = RemoveLiquidityImbalanceInfo(
            0,
            0,
            0,
            0
        );

        uint256 tokenSupply = self.lpToken.totalSupply();
        uint256 feePerToken = _feePerToken(self);

        uint256[] memory balances1 = self.balances;

        v.preciseA = _getAPrecise(self);
        v.d0 = getD(_xp(self), v.preciseA);
        for (uint256 i = 0; i < self.pooledTokens.length; i++) {
            balances1[i] = balances1[i].sub(
                amounts[i],
                "Cannot withdraw more than available"
            );
        }
        v.d1 = getD(_xp(self, balances1), v.preciseA);
        uint256[] memory fees = new uint256[](self.pooledTokens.length);

        for (uint256 i = 0; i < self.pooledTokens.length; i++) {
            uint256 idealBalance = v.d1.mul(self.balances[i]).div(v.d0);
            uint256 difference = idealBalance.difference(balances1[i]);
            fees[i] = feePerToken.mul(difference).div(FEE_DENOMINATOR);
            self.balances[i] = balances1[i].sub(
                fees[i].mul(self.adminFee).div(FEE_DENOMINATOR)
            );
            balances1[i] = balances1[i].sub(fees[i]);
        }

        v.d2 = getD(_xp(self, balances1), v.preciseA);

        uint256 tokenAmount = v.d0.sub(v.d2).mul(tokenSupply).div(v.d0);
        require(tokenAmount != 0, "Burnt amount cannot be zero");
        tokenAmount = tokenAmount.add(1).mul(FEE_DENOMINATOR).div(
            FEE_DENOMINATOR.sub(calculateCurrentWithdrawFee(self, msg.sender))
        );

        require(tokenAmount <= maxBurnAmount, "tokenAmount > maxBurnAmount");

        self.lpToken.burnFrom(msg.sender, tokenAmount);

        for (uint256 i = 0; i < self.pooledTokens.length; i++) {
            self.pooledTokens[i].safeTransfer(msg.sender, amounts[i]);
        }

        emit RemoveLiquidityImbalance(
            msg.sender,
            amounts,
            fees,
            v.d1,
            tokenSupply.sub(tokenAmount)
        );

        return tokenAmount;
    }

    /**
     * @notice withdraw all admin fees to a given address
     * @param self Swap struct to withdraw fees from
     * @param to Address to send the fees to
     */
    function withdrawAdminFees(Swap storage self, address to) external {
        for (uint256 i = 0; i < self.pooledTokens.length; i++) {
            IERC20 token = self.pooledTokens[i];
            uint256 balance = token.balanceOf(address(this)).sub(
                self.balances[i]
            );
            if (balance != 0) {
                token.safeTransfer(to, balance);
            }
        }
    }

    /**
     * @notice Sets the admin fee
     * @dev adminFee cannot be higher than 100% of the swap fee
     * @param self Swap struct to update
     * @param newAdminFee new admin fee to be applied on future transactions
     */
    function setAdminFee(Swap storage self, uint256 newAdminFee) external {
        require(newAdminFee <= MAX_ADMIN_FEE, "Fee is too high");
        self.adminFee = newAdminFee;

        emit NewAdminFee(newAdminFee);
    }

    /**
     * @notice update the swap fee
     * @dev fee cannot be higher than 1% of each swap
     * @param self Swap struct to update
     * @param newSwapFee new swap fee to be applied on future transactions
     */
    function setSwapFee(Swap storage self, uint256 newSwapFee) external {
        require(newSwapFee <= MAX_SWAP_FEE, "Fee is too high");
        self.swapFee = newSwapFee;

        emit NewSwapFee(newSwapFee);
    }

    /**
     * @notice update the default withdraw fee. This also affects deposits made in the past as well.
     * @param self Swap struct to update
     * @param newWithdrawFee new withdraw fee to be applied
     */
    function setDefaultWithdrawFee(Swap storage self, uint256 newWithdrawFee)
        external
    {
        require(newWithdrawFee <= MAX_WITHDRAW_FEE, "Fee is too high");
        self.defaultWithdrawFee = newWithdrawFee;

        emit NewWithdrawFee(newWithdrawFee);
    }

    /**
     * @notice Start ramping up or down A parameter towards given futureA_ and futureTime_
     * Checks if the change is too rapid, and commits the new A value only when it falls under
     * the limit range.
     * @param self Swap struct to update
     * @param futureA_ the new A to ramp towards
     * @param futureTime_ timestamp when the new A should be reached
     */
    function rampA(
        Swap storage self,
        uint256 futureA_,
        uint256 futureTime_
    ) external {
        require(
            block.timestamp >= self.initialATime.add(1 days),
            "Wait 1 day before starting ramp"
        );
        require(
            futureTime_ >= block.timestamp.add(MIN_RAMP_TIME),
            "Insufficient ramp time"
        );
        require(
            futureA_ > 0 && futureA_ < MAX_A,
            "futureA_ must be > 0 and < MAX_A"
        );

        uint256 initialAPrecise = _getAPrecise(self);
        uint256 futureAPrecise = futureA_.mul(A_PRECISION);

        if (futureAPrecise < initialAPrecise) {
            require(
                futureAPrecise.mul(MAX_A_CHANGE) >= initialAPrecise,
                "futureA_ is too small"
            );
        } else {
            require(
                futureAPrecise <= initialAPrecise.mul(MAX_A_CHANGE),
                "futureA_ is too large"
            );
        }

        self.initialA = initialAPrecise;
        self.futureA = futureAPrecise;
        self.initialATime = block.timestamp;
        self.futureATime = futureTime_;

        emit RampA(
            initialAPrecise,
            futureAPrecise,
            block.timestamp,
            futureTime_
        );
    }

    /**
     * @notice Stops ramping A immediately. Once this function is called, rampA()
     * cannot be called for another 24 hours
     * @param self Swap struct to update
     */
    function stopRampA(Swap storage self) external {
        require(self.futureATime > block.timestamp, "Ramp is already stopped");
        uint256 currentA = _getAPrecise(self);

        self.initialA = currentA;
        self.futureA = currentA;
        self.initialATime = block.timestamp;
        self.futureATime = block.timestamp;

        emit StopRampA(currentA, block.timestamp);
    }
}

// SPDX-License-Identifier: MIT

// https://etherscan.io/address/0xC28DF698475dEC994BE00C9C9D8658A548e6304F#code

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20Burnable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "../interfaces/ISwapGuarded.sol";

/**
 * @title Liquidity Provider Token
 * @notice This token is an ERC20 detailed token with added capability to be minted by the owner.
 * It is used to represent user's shares when providing liquidity to swap contracts.
 */
contract LPTokenGuarded is ERC20Burnable, Ownable {
    using SafeMath for uint256;

    // Address of the swap contract that owns this LP token. When a user adds liquidity to the swap contract,
    // they receive a proportionate amount of this LPToken.
    ISwapGuarded public swap;

    // Maps user account to total number of LPToken minted by them. Used to limit minting during guarded release phase
    mapping(address => uint256) public mintedAmounts;

    /**
     * @notice Deploys LPToken contract with given name, symbol, and decimals
     * @dev the caller of this constructor will become the owner of this contract
     * @param name_ name of this token
     * @param symbol_ symbol of this token
     * @param decimals_ number of decimals this token will be based on
     */
    constructor(
        string memory name_,
        string memory symbol_,
        uint8 decimals_
    ) public ERC20(name_, symbol_) {
        _setupDecimals(decimals_);
        swap = ISwapGuarded(_msgSender());
    }

    /**
     * @notice Mints the given amount of LPToken to the recipient. During the guarded release phase, the total supply
     * and the maximum number of the tokens that a single account can mint are limited.
     * @dev only owner can call this mint function
     * @param recipient address of account to receive the tokens
     * @param amount amount of tokens to mint
     * @param merkleProof the bytes32 array data that is used to prove recipient's address exists in the merkle tree
     * stored in the allowlist contract. If the pool is not guarded, this parameter is ignored.
     */
    function mint(
        address recipient,
        uint256 amount,
        bytes32[] calldata merkleProof
    ) external onlyOwner {
        require(amount != 0, "amount == 0");

        // If the pool is in the guarded launch phase, the following checks are done to restrict deposits.
        //   1. Check if the given merkleProof corresponds to the recipient's address in the merkle tree stored in the
        //      allowlist contract. If the account has been already verified, merkleProof is ignored.
        //   2. Limit the total number of this LPToken minted to recipient as defined by the allowlist contract.
        //   3. Limit the total supply of this LPToken as defined by the allowlist contract.
        if (swap.isGuarded()) {
            IAllowlist allowlist = swap.getAllowlist();
            require(
                allowlist.verifyAddress(recipient, merkleProof),
                "Invalid merkle proof"
            );
            uint256 totalMinted = mintedAmounts[recipient].add(amount);
            require(
                totalMinted <= allowlist.getPoolAccountLimit(address(swap)),
                "account deposit limit"
            );
            require(
                totalSupply().add(amount) <=
                    allowlist.getPoolCap(address(swap)),
                "pool total supply limit"
            );
            mintedAmounts[recipient] = totalMinted;
        }
        _mint(recipient, amount);
    }

    /**
     * @dev Overrides ERC20._beforeTokenTransfer() which get called on every transfers including
     * minting and burning. This ensures that swap.updateUserWithdrawFees are called everytime.
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal override(ERC20) {
        super._beforeTokenTransfer(from, to, amount);
        swap.updateUserWithdrawFee(to, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../../utils/Context.sol";
import "./ERC20.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    using SafeMath for uint256;

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./IAllowlist.sol";

interface ISwapGuarded {
    // pool data view functions
    function getA() external view returns (uint256);

    function getAllowlist() external view returns (IAllowlist);

    function getToken(uint8 index) external view returns (IERC20);

    function getTokenIndex(address tokenAddress) external view returns (uint8);

    function getTokenBalance(uint8 index) external view returns (uint256);

    function getVirtualPrice() external view returns (uint256);

    function isGuarded() external view returns (bool);

    // min return calculation functions
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256);

    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        returns (uint256);

    function calculateRemoveLiquidity(uint256 amount)
        external
        view
        returns (uint256[] memory);

    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256 availableTokenAmount);

    // state modifying functions
    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    ) external returns (uint256);

    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline,
        bytes32[] calldata merkleProof
    ) external returns (uint256);

    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external returns (uint256[] memory);

    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    ) external returns (uint256);

    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    ) external returns (uint256);

    // withdraw fee update function
    function updateUserWithdrawFee(address recipient, uint256 transferAmount)
        external;
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/cryptography/MerkleProof.sol";
import "../interfaces/IAllowlist.sol";

/**
 * @title Allowlist
 * @notice This contract is a registry holding information about how much each swap contract should
 * contain upto. Swap.sol will rely on this contract to determine whether the pool cap is reached and
 * also whether a user's deposit limit is reached.
 */
contract Allowlist is Ownable, IAllowlist {
    using SafeMath for uint256;

    // Represents the root node of merkle tree containing a list of eligible addresses
    bytes32 public merkleRoot;
    // Maps pool address -> maximum total supply
    mapping(address => uint256) private poolCaps;
    // Maps pool address -> maximum amount of pool token mintable per account
    mapping(address => uint256) private accountLimits;
    // Maps account address -> boolean value indicating whether it has been checked and verified against the merkle tree
    mapping(address => bool) private verified;

    event PoolCap(address indexed poolAddress, uint256 poolCap);
    event PoolAccountLimit(address indexed poolAddress, uint256 accountLimit);
    event NewMerkleRoot(bytes32 merkleRoot);

    /**
     * @notice Creates this contract and sets the PoolCap of 0x0 with uint256(0x54dd1e) for
     * crude checking whether an address holds this contract.
     * @param merkleRoot_ bytes32 that represent a merkle root node. This is generated off chain with the list of
     * qualifying addresses.
     */
    constructor(bytes32 merkleRoot_) public {
        merkleRoot = merkleRoot_;

        // This value will be used as a way of crude checking whether an address holds this Allowlist contract
        // Value 0x54dd1e has no inherent meaning other than it is arbitrary value that checks for
        // user error.
        poolCaps[address(0x0)] = uint256(0x54dd1e);
        emit PoolCap(address(0x0), uint256(0x54dd1e));
        emit NewMerkleRoot(merkleRoot_);
    }

    /**
     * @notice Returns the max mintable amount of the lp token per account in given pool address.
     * @param poolAddress address of the pool
     * @return max mintable amount of the lp token per account
     */
    function getPoolAccountLimit(address poolAddress)
        external
        view
        override
        returns (uint256)
    {
        return accountLimits[poolAddress];
    }

    /**
     * @notice Returns the maximum total supply of the pool token for the given pool address.
     * @param poolAddress address of the pool
     */
    function getPoolCap(address poolAddress)
        external
        view
        override
        returns (uint256)
    {
        return poolCaps[poolAddress];
    }

    /**
     * @notice Returns true if the given account's existence has been verified against any of the past or
     * the present merkle tree. Note that if it has been verified in the past, this function will return true
     * even if the current merkle tree does not contain the account.
     * @param account the address to check if it has been verified
     * @return a boolean value representing whether the account has been verified in the past or the present merkle tree
     */
    function isAccountVerified(address account) external view returns (bool) {
        return verified[account];
    }

    /**
     * @notice Checks the existence of keccak256(account) as a node in the merkle tree inferred by the merkle root node
     * stored in this contract. Pools should use this function to check if the given address qualifies for depositing.
     * If the given account has already been verified with the correct merkleProof, this function will return true when
     * merkleProof is empty. The verified status will be overwritten if the previously verified user calls this function
     * with an incorrect merkleProof.
     * @param account address to confirm its existence in the merkle tree
     * @param merkleProof data that is used to prove the existence of given parameters. This is generated
     * during the creation of the merkle tree. Users should retrieve this data off-chain.
     * @return a boolean value that corresponds to whether the address with the proof has been verified in the past
     * or if they exist in the current merkle tree.
     */
    function verifyAddress(address account, bytes32[] calldata merkleProof)
        external
        override
        returns (bool)
    {
        if (merkleProof.length != 0) {
            // Verify the account exists in the merkle tree via the MerkleProof library
            bytes32 node = keccak256(abi.encodePacked(account));
            if (MerkleProof.verify(merkleProof, merkleRoot, node)) {
                verified[account] = true;
                return true;
            }
        }
        return verified[account];
    }

    // ADMIN FUNCTIONS

    /**
     * @notice Sets the account limit of allowed deposit amounts for the given pool
     * @param poolAddress address of the pool
     * @param accountLimit the max number of the pool token a single user can mint
     */
    function setPoolAccountLimit(address poolAddress, uint256 accountLimit)
        external
        onlyOwner
    {
        require(poolAddress != address(0x0), "0x0 is not a pool address");
        accountLimits[poolAddress] = accountLimit;
        emit PoolAccountLimit(poolAddress, accountLimit);
    }

    /**
     * @notice Sets the max total supply of LPToken for the given pool address
     * @param poolAddress address of the pool
     * @param poolCap the max total supply of the pool token
     */
    function setPoolCap(address poolAddress, uint256 poolCap)
        external
        onlyOwner
    {
        require(poolAddress != address(0x0), "0x0 is not a pool address");
        poolCaps[poolAddress] = poolCap;
        emit PoolCap(poolAddress, poolCap);
    }

    /**
     * @notice Updates the merkle root that is stored in this contract. This can only be called by
     * the owner. If more addresses are added to the list, a new merkle tree and a merkle root node should be generated,
     * and merkleRoot should be updated accordingly.
     * @param merkleRoot_ a new merkle root node that contains a list of deposit allowed addresses
     */
    function updateMerkleRoot(bytes32 merkleRoot_) external onlyOwner {
        merkleRoot = merkleRoot_;
        emit NewMerkleRoot(merkleRoot_);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev These functions deal with verification of Merkle trees (hash trees),
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(bytes32[] memory proof, bytes32 root, bytes32 leaf) internal pure returns (bool) {
        bytes32 computedHash = leaf;

        for (uint256 i = 0; i < proof.length; i++) {
            bytes32 proofElement = proof[i];

            if (computedHash <= proofElement) {
                // Hash(current computed hash + current element of the proof)
                computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
            } else {
                // Hash(current element of the proof + current computed hash)
                computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
            }
        }

        // Check if the computed hash (root) is equal to the provided root
        return computedHash == root;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "./OwnerPausable.sol";
import "./SwapUtilsGuarded.sol";
import "../MathUtils.sol";
import "./Allowlist.sol";

/**
 * @title Swap - A StableSwap implementation in solidity.
 * @notice This contract is responsible for custody of closely pegged assets (eg. group of stablecoins)
 * and automatic market making system. Users become an LP (Liquidity Provider) by depositing their tokens
 * in desired ratios for an exchange of the pool token that represents their share of the pool.
 * Users can burn pool tokens and withdraw their share of token(s).
 *
 * Each time a swap between the pooled tokens happens, a set fee incurs which effectively gets
 * distributed to the LPs.
 *
 * In case of emergencies, admin can pause additional deposits, swaps, or single-asset withdraws - which
 * stops the ratio of the tokens in the pool from changing.
 * Users can always withdraw their tokens via multi-asset withdraws.
 *
 * @dev Most of the logic is stored as a library `SwapUtils` for the sake of reducing contract's
 * deployment size.
 */
contract SwapGuarded is OwnerPausable, ReentrancyGuard {
    using SafeERC20 for IERC20;
    using SafeMath for uint256;
    using MathUtils for uint256;
    using SwapUtilsGuarded for SwapUtilsGuarded.Swap;

    // Struct storing data responsible for automatic market maker functionalities. In order to
    // access this data, this contract uses SwapUtils library. For more details, see SwapUtilsGuarded.sol
    SwapUtilsGuarded.Swap public swapStorage;

    // Address to allowlist contract that holds information about maximum totaly supply of lp tokens
    // and maximum mintable amount per user address. As this is immutable, this will become a constant
    // after initialization.
    IAllowlist private immutable allowlist;

    // Boolean value that notates whether this pool is guarded or not. When isGuarded is true,
    // addLiquidity function will be restricted by limits defined in allowlist contract.
    bool private guarded = true;

    // Maps token address to an index in the pool. Used to prevent duplicate tokens in the pool.
    // getTokenIndex function also relies on this mapping to retrieve token index.
    mapping(address => uint8) private tokenIndexes;

    /*** EVENTS ***/

    // events replicated from SwapUtils to make the ABI easier for dumb
    // clients
    event TokenSwap(
        address indexed buyer,
        uint256 tokensSold,
        uint256 tokensBought,
        uint128 soldId,
        uint128 boughtId
    );
    event AddLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event RemoveLiquidity(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256 lpTokenSupply
    );
    event RemoveLiquidityOne(
        address indexed provider,
        uint256 lpTokenAmount,
        uint256 lpTokenSupply,
        uint256 boughtId,
        uint256 tokensBought
    );
    event RemoveLiquidityImbalance(
        address indexed provider,
        uint256[] tokenAmounts,
        uint256[] fees,
        uint256 invariant,
        uint256 lpTokenSupply
    );
    event NewAdminFee(uint256 newAdminFee);
    event NewSwapFee(uint256 newSwapFee);
    event NewWithdrawFee(uint256 newWithdrawFee);
    event RampA(
        uint256 oldA,
        uint256 newA,
        uint256 initialTime,
        uint256 futureTime
    );
    event StopRampA(uint256 currentA, uint256 time);

    /**
     * @notice Deploys this Swap contract with given parameters as default
     * values. This will also deploy a LPToken that represents users
     * LP position. The owner of LPToken will be this contract - which means
     * only this contract is allowed to mint new tokens.
     *
     * @param _pooledTokens an array of ERC20s this pool will accept
     * @param decimals the decimals to use for each pooled token,
     * eg 8 for WBTC. Cannot be larger than POOL_PRECISION_DECIMALS
     * @param lpTokenName the long-form name of the token to be deployed
     * @param lpTokenSymbol the short symbol for the token to be deployed
     * @param _a the amplification coefficient * n * (n - 1). See the
     * StableSwap paper for details
     * @param _fee default swap fee to be initialized with
     * @param _adminFee default adminFee to be initialized with
     * @param _withdrawFee default withdrawFee to be initialized with
     * @param _allowlist address of allowlist contract for guarded launch
     */
    constructor(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        uint256 _withdrawFee,
        IAllowlist _allowlist
    ) public OwnerPausable() ReentrancyGuard() {
        // Check _pooledTokens and precisions parameter
        require(_pooledTokens.length > 1, "_pooledTokens.length <= 1");
        require(_pooledTokens.length <= 32, "_pooledTokens.length > 32");
        require(
            _pooledTokens.length == decimals.length,
            "_pooledTokens decimals mismatch"
        );

        uint256[] memory precisionMultipliers = new uint256[](decimals.length);

        for (uint8 i = 0; i < _pooledTokens.length; i++) {
            if (i > 0) {
                // Check if index is already used. Check if 0th element is a duplicate.
                require(
                    tokenIndexes[address(_pooledTokens[i])] == 0 &&
                        _pooledTokens[0] != _pooledTokens[i],
                    "Duplicate tokens"
                );
            }
            require(
                address(_pooledTokens[i]) != address(0),
                "The 0 address isn't an ERC-20"
            );
            require(
                decimals[i] <= SwapUtilsGuarded.POOL_PRECISION_DECIMALS,
                "Token decimals exceeds max"
            );
            precisionMultipliers[i] =
                10 **
                    uint256(SwapUtilsGuarded.POOL_PRECISION_DECIMALS).sub(
                        uint256(decimals[i])
                    );
            tokenIndexes[address(_pooledTokens[i])] = i;
        }

        // Check _a, _fee, _adminFee, _withdrawFee, _allowlist parameters
        require(_a < SwapUtilsGuarded.MAX_A, "_a exceeds maximum");
        require(_fee < SwapUtilsGuarded.MAX_SWAP_FEE, "_fee exceeds maximum");
        require(
            _adminFee < SwapUtilsGuarded.MAX_ADMIN_FEE,
            "_adminFee exceeds maximum"
        );
        require(
            _withdrawFee < SwapUtilsGuarded.MAX_WITHDRAW_FEE,
            "_withdrawFee exceeds maximum"
        );
        require(
            _allowlist.getPoolCap(address(0x0)) == uint256(0x54dd1e),
            "Allowlist check failed"
        );

        // Initialize swapStorage struct
        swapStorage.lpToken = new LPTokenGuarded(
            lpTokenName,
            lpTokenSymbol,
            SwapUtilsGuarded.POOL_PRECISION_DECIMALS
        );
        swapStorage.pooledTokens = _pooledTokens;
        swapStorage.tokenPrecisionMultipliers = precisionMultipliers;
        swapStorage.balances = new uint256[](_pooledTokens.length);
        swapStorage.initialA = _a.mul(SwapUtilsGuarded.A_PRECISION);
        swapStorage.futureA = _a.mul(SwapUtilsGuarded.A_PRECISION);
        swapStorage.initialATime = 0;
        swapStorage.futureATime = 0;
        swapStorage.swapFee = _fee;
        swapStorage.adminFee = _adminFee;
        swapStorage.defaultWithdrawFee = _withdrawFee;

        // Initialize variables related to guarding the initial deposits
        allowlist = _allowlist;
        guarded = true;
    }

    /*** MODIFIERS ***/

    /**
     * @notice Modifier to check deadline against current timestamp
     * @param deadline latest timestamp to accept this transaction
     */
    modifier deadlineCheck(uint256 deadline) {
        require(block.timestamp <= deadline, "Deadline not met");
        _;
    }

    /*** VIEW FUNCTIONS ***/

    /**
     * @notice Return A, the amplification coefficient * n * (n - 1)
     * @dev See the StableSwap paper for details
     * @return A parameter
     */
    function getA() external view returns (uint256) {
        return swapStorage.getA();
    }

    /**
     * @notice Return A in its raw precision form
     * @dev See the StableSwap paper for details
     * @return A parameter in its raw precision form
     */
    function getAPrecise() external view returns (uint256) {
        return swapStorage.getAPrecise();
    }

    /**
     * @notice Return address of the pooled token at given index. Reverts if tokenIndex is out of range.
     * @param index the index of the token
     * @return address of the token at given index
     */
    function getToken(uint8 index) public view returns (IERC20) {
        require(index < swapStorage.pooledTokens.length, "Out of range");
        return swapStorage.pooledTokens[index];
    }

    /**
     * @notice Return the index of the given token address. Reverts if no matching
     * token is found.
     * @param tokenAddress address of the token
     * @return the index of the given token address
     */
    function getTokenIndex(address tokenAddress) external view returns (uint8) {
        uint8 index = tokenIndexes[tokenAddress];
        require(
            address(getToken(index)) == tokenAddress,
            "Token does not exist"
        );
        return index;
    }

    /**
     * @notice Reads and returns the address of the allowlist that is set during deployment of this contract
     * @return the address of the allowlist contract casted to the IAllowlist interface
     */
    function getAllowlist() external view returns (IAllowlist) {
        return allowlist;
    }

    /**
     * @notice Return timestamp of last deposit of given address
     * @return timestamp of the last deposit made by the given address
     */
    function getDepositTimestamp(address user) external view returns (uint256) {
        return swapStorage.getDepositTimestamp(user);
    }

    /**
     * @notice Return current balance of the pooled token at given index
     * @param index the index of the token
     * @return current balance of the pooled token at given index with token's native precision
     */
    function getTokenBalance(uint8 index) external view returns (uint256) {
        require(index < swapStorage.pooledTokens.length, "Index out of range");
        return swapStorage.balances[index];
    }

    /**
     * @notice Get the virtual price, to help calculate profit
     * @return the virtual price, scaled to the POOL_PRECISION_DECIMALS
     */
    function getVirtualPrice() external view returns (uint256) {
        return swapStorage.getVirtualPrice();
    }

    /**
     * @notice Calculate amount of tokens you receive on swap
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell. If the token charges
     * a fee on transfers, use the amount that gets transferred after the fee.
     * @return amount of tokens the user will receive
     */
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view returns (uint256) {
        return swapStorage.calculateSwap(tokenIndexFrom, tokenIndexTo, dx);
    }

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param account address that is depositing or withdrawing tokens
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return token amount the user will receive
     */
    function calculateTokenAmount(
        address account,
        uint256[] calldata amounts,
        bool deposit
    ) external view returns (uint256) {
        return swapStorage.calculateTokenAmount(account, amounts, deposit);
    }

    /**
     * @notice A simple method to calculate amount of each underlying
     * tokens that is returned upon burning given amount of LP tokens
     * @param account the address that is withdrawing tokens
     * @param amount the amount of LP tokens that would be burned on withdrawal
     * @return array of token balances that the user will receive
     */
    function calculateRemoveLiquidity(address account, uint256 amount)
        external
        view
        returns (uint256[] memory)
    {
        return swapStorage.calculateRemoveLiquidity(account, amount);
    }

    /**
     * @notice Calculate the amount of underlying token available to withdraw
     * when withdrawing via only single token
     * @param account the address that is withdrawing tokens
     * @param tokenAmount the amount of LP token to burn
     * @param tokenIndex index of which token will be withdrawn
     * @return availableTokenAmount calculated amount of underlying token
     * available to withdraw
     */
    function calculateRemoveLiquidityOneToken(
        address account,
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view returns (uint256 availableTokenAmount) {
        (availableTokenAmount, ) = swapStorage.calculateWithdrawOneToken(
            account,
            tokenAmount,
            tokenIndex
        );
    }

    /**
     * @notice Calculate the fee that is applied when the given user withdraws. The withdraw fee
     * decays linearly over period of 4 weeks. For example, depositing and withdrawing right away
     * will charge you the full amount of withdraw fee. But withdrawing after 4 weeks will charge you
     * no additional fees.
     * @dev returned value should be divided by FEE_DENOMINATOR to convert to correct decimals
     * @param user address you want to calculate withdraw fee of
     * @return current withdraw fee of the user
     */
    function calculateCurrentWithdrawFee(address user)
        external
        view
        returns (uint256)
    {
        return swapStorage.calculateCurrentWithdrawFee(user);
    }

    /**
     * @notice This function reads the accumulated amount of admin fees of the token with given index
     * @param index Index of the pooled token
     * @return admin's token balance in the token's precision
     */
    function getAdminBalance(uint256 index) external view returns (uint256) {
        return swapStorage.getAdminBalance(index);
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice Swap two tokens using this pool
     * @param tokenIndexFrom the token the user wants to swap from
     * @param tokenIndexTo the token the user wants to swap to
     * @param dx the amount of tokens the user wants to swap from
     * @param minDy the min amount the user would like to receive, or revert.
     * @param deadline latest timestamp to accept this transaction
     */
    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    )
        external
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return swapStorage.swap(tokenIndexFrom, tokenIndexTo, dx, minDy);
    }

    /**
     * @notice Add liquidity to the pool with given amounts during guarded launch phase. Only users
     * with valid address and proof can successfully call this function. When this function is called
     * after the guarded release phase is over, the merkleProof is ignored.
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @param merkleProof data generated when constructing the allowlist merkle tree. Users can
     * get this data off chain. Even if the address is in the allowlist, users must include
     * a valid proof for this call to succeed. If the pool is no longer in the guarded release phase,
     * this parameter is ignored.
     * @return amount of LP token user minted and received
     */
    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline,
        bytes32[] calldata merkleProof
    )
        external
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return swapStorage.addLiquidity(amounts, minToMint, merkleProof);
    }

    /**
     * @notice Burn LP tokens to remove liquidity from the pool. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @dev Liquidity can always be removed, even when the pool is paused.
     * @param amount the amount of LP tokens to burn
     * @param minAmounts the minimum amounts of each token in the pool
     *        acceptable for this burn. Useful as a front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amounts of tokens user received
     */
    function removeLiquidity(
        uint256 amount,
        uint256[] calldata minAmounts,
        uint256 deadline
    ) external nonReentrant deadlineCheck(deadline) returns (uint256[] memory) {
        return swapStorage.removeLiquidity(amount, minAmounts);
    }

    /**
     * @notice Remove liquidity from the pool all in one token. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param tokenAmount the amount of the token you want to receive
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @param deadline latest timestamp to accept this transaction
     * @return amount of chosen token user received
     */
    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    )
        external
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return
            swapStorage.removeLiquidityOneToken(
                tokenAmount,
                tokenIndex,
                minAmount
            );
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP tokens burned
     */
    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    )
        external
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return swapStorage.removeLiquidityImbalance(amounts, maxBurnAmount);
    }

    /*** ADMIN FUNCTIONS ***/

    /**
     * @notice Updates the user withdraw fee. This function can only be called by
     * the pool token. Should be used to update the withdraw fee on transfer of pool tokens.
     * Transferring your pool token will reset the 4 weeks period. If the recipient is already
     * holding some pool tokens, the withdraw fee will be discounted in respective amounts.
     * @param recipient address of the recipient of pool token
     * @param transferAmount amount of pool token to transfer
     */
    function updateUserWithdrawFee(address recipient, uint256 transferAmount)
        external
    {
        require(
            msg.sender == address(swapStorage.lpToken),
            "Only callable by pool token"
        );
        swapStorage.updateUserWithdrawFee(recipient, transferAmount);
    }

    /**
     * @notice Withdraw all admin fees to the contract owner
     */
    function withdrawAdminFees() external onlyOwner {
        swapStorage.withdrawAdminFees(owner());
    }

    /**
     * @notice Update the admin fee. Admin fee takes portion of the swap fee.
     * @param newAdminFee new admin fee to be applied on future transactions
     */
    function setAdminFee(uint256 newAdminFee) external onlyOwner {
        swapStorage.setAdminFee(newAdminFee);
    }

    /**
     * @notice Update the swap fee to be applied on swaps
     * @param newSwapFee new swap fee to be applied on future transactions
     */
    function setSwapFee(uint256 newSwapFee) external onlyOwner {
        swapStorage.setSwapFee(newSwapFee);
    }

    /**
     * @notice Update the withdraw fee. This fee decays linearly over 4 weeks since
     * user's last deposit.
     * @param newWithdrawFee new withdraw fee to be applied on future deposits
     */
    function setDefaultWithdrawFee(uint256 newWithdrawFee) external onlyOwner {
        swapStorage.setDefaultWithdrawFee(newWithdrawFee);
    }

    /**
     * @notice Start ramping up or down A parameter towards given futureA and futureTime
     * Checks if the change is too rapid, and commits the new A value only when it falls under
     * the limit range.
     * @param futureA the new A to ramp towards
     * @param futureTime timestamp when the new A should be reached
     */
    function rampA(uint256 futureA, uint256 futureTime) external onlyOwner {
        swapStorage.rampA(futureA, futureTime);
    }

    /**
     * @notice Stop ramping A immediately. Reverts if ramp A is already stopped.
     */
    function stopRampA() external onlyOwner {
        swapStorage.stopRampA();
    }

    /**
     * @notice Disables the guarded launch phase, removing any limits on deposit amounts and addresses
     */
    function disableGuard() external onlyOwner {
        guarded = false;
    }

    /**
     * @notice Reads and returns current guarded status of the pool
     * @return guarded_ boolean value indicating whether the deposits should be guarded
     */
    function isGuarded() external view returns (bool) {
        return guarded;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";

/**
 * @title OwnerPausable
 * @notice An ownable contract allows the owner to pause and unpause the
 * contract without a delay.
 * @dev Only methods using the provided modifiers will be paused.
 */
contract OwnerPausable is Ownable, Pausable {
    /**
     * @notice Pause the contract. Revert if already paused.
     */
    function pause() external onlyOwner {
        Pausable._pause();
    }

    /**
     * @notice Unpause the contract. Revert if already unpaused.
     */
    function unpause() external onlyOwner {
        Pausable._unpause();
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

/**
 * @title Generic ERC20 token
 * @notice This contract simulates a generic ERC20 token that is mintable and burnable.
 */
contract GenericERC20 is ERC20, Ownable {
    /**
     * @notice Deploy this contract with given name, symbol, and decimals
     * @dev the caller of this constructor will become the owner of this contract
     * @param name_ name of this token
     * @param symbol_ symbol of this token
     * @param decimals_ number of decimals this token will be based on
     */
    constructor(
        string memory name_,
        string memory symbol_,
        uint8 decimals_
    ) public ERC20(name_, symbol_) {
        _setupDecimals(decimals_);
    }

    /**
     * @notice Mints given amount of tokens to recipient
     * @dev only owner can call this mint function
     * @param recipient address of account to receive the tokens
     * @param amount amount of tokens to mint
     */
    function mint(address recipient, uint256 amount) external onlyOwner {
        require(amount != 0, "amount == 0");
        _mint(recipient, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "../Swap.sol";
import "./MetaSwapUtils.sol";

/**
 * @title MetaSwap - A StableSwap implementation in solidity.
 * @notice This contract is responsible for custody of closely pegged assets (eg. group of stablecoins)
 * and automatic market making system. Users become an LP (Liquidity Provider) by depositing their tokens
 * in desired ratios for an exchange of the pool token that represents their share of the pool.
 * Users can burn pool tokens and withdraw their share of token(s).
 *
 * Each time a swap between the pooled tokens happens, a set fee incurs which effectively gets
 * distributed to the LPs.
 *
 * In case of emergencies, admin can pause additional deposits, swaps, or single-asset withdraws - which
 * stops the ratio of the tokens in the pool from changing.
 * Users can always withdraw their tokens via multi-asset withdraws.
 *
 * MetaSwap is a modified version of Swap that allows Swap's LP token to be utilized in pooling with other tokens.
 * As an example, if there is a Swap pool consisting of [DAI, USDC, USDT], then a MetaSwap pool can be created
 * with [sUSD, BaseSwapLPToken] to allow trades between either the LP token or the underlying tokens and sUSD.
 * Note that when interacting with MetaSwap, users cannot deposit or withdraw via underlying tokens. In that case,
 * `MetaSwapDeposit.sol` can be additionally deployed to allow interacting with unwrapped representations of the tokens.
 *
 * @dev Most of the logic is stored as a library `MetaSwapUtils` for the sake of reducing contract's
 * deployment size.
 */
contract MetaSwap is Swap {
    using MetaSwapUtils for SwapUtils.Swap;

    MetaSwapUtils.MetaSwap public metaSwapStorage;

    uint256 constant MAX_UINT256 = 2**256 - 1;

    /*** EVENTS ***/

    // events replicated from SwapUtils to make the ABI easier for dumb
    // clients
    event TokenSwapUnderlying(
        address indexed buyer,
        uint256 tokensSold,
        uint256 tokensBought,
        uint128 soldId,
        uint128 boughtId
    );

    /**
     * @notice Get the virtual price, to help calculate profit
     * @return the virtual price, scaled to the POOL_PRECISION_DECIMALS
     */
    function getVirtualPrice()
        external
        view
        virtual
        override
        returns (uint256)
    {
        return MetaSwapUtils.getVirtualPrice(swapStorage, metaSwapStorage);
    }

    /**
     * @notice Calculate amount of tokens you receive on swap
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell. If the token charges
     * a fee on transfers, use the amount that gets transferred after the fee.
     * @return amount of tokens the user will receive
     */
    function calculateSwap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view virtual override returns (uint256) {
        return
            MetaSwapUtils.calculateSwap(
                swapStorage,
                metaSwapStorage,
                tokenIndexFrom,
                tokenIndexTo,
                dx
            );
    }

    /**
     * @notice Calculate amount of tokens you receive on swap. For this function,
     * the token indices are flattened out so that underlying tokens are represented.
     * @param tokenIndexFrom the token the user wants to sell
     * @param tokenIndexTo the token the user wants to buy
     * @param dx the amount of tokens the user wants to sell. If the token charges
     * a fee on transfers, use the amount that gets transferred after the fee.
     * @return amount of tokens the user will receive
     */
    function calculateSwapUnderlying(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx
    ) external view virtual returns (uint256) {
        return
            MetaSwapUtils.calculateSwapUnderlying(
                swapStorage,
                metaSwapStorage,
                tokenIndexFrom,
                tokenIndexTo,
                dx
            );
    }

    /**
     * @notice A simple method to calculate prices from deposits or
     * withdrawals, excluding fees but including slippage. This is
     * helpful as an input into the various "min" parameters on calls
     * to fight front-running
     *
     * @dev This shouldn't be used outside frontends for user estimates.
     *
     * @param amounts an array of token amounts to deposit or withdrawal,
     * corresponding to pooledTokens. The amount should be in each
     * pooled token's native precision. If a token charges a fee on transfers,
     * use the amount that gets transferred after the fee.
     * @param deposit whether this is a deposit or a withdrawal
     * @return token amount the user will receive
     */
    function calculateTokenAmount(uint256[] calldata amounts, bool deposit)
        external
        view
        virtual
        override
        returns (uint256)
    {
        return
            MetaSwapUtils.calculateTokenAmount(
                swapStorage,
                metaSwapStorage,
                amounts,
                deposit
            );
    }

    /**
     * @notice Calculate the amount of underlying token available to withdraw
     * when withdrawing via only single token
     * @param tokenAmount the amount of LP token to burn
     * @param tokenIndex index of which token will be withdrawn
     * @return availableTokenAmount calculated amount of underlying token
     * available to withdraw
     */
    function calculateRemoveLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex
    ) external view virtual override returns (uint256) {
        return
            MetaSwapUtils.calculateWithdrawOneToken(
                swapStorage,
                metaSwapStorage,
                tokenAmount,
                tokenIndex
            );
    }

    /*** STATE MODIFYING FUNCTIONS ***/

    /**
     * @notice This overrides Swap's initialize function to prevent initializing
     * without the address of the base Swap contract.
     *
     * @param _pooledTokens an array of ERC20s this pool will accept
     * @param decimals the decimals to use for each pooled token,
     * eg 8 for WBTC. Cannot be larger than POOL_PRECISION_DECIMALS
     * @param lpTokenName the long-form name of the token to be deployed
     * @param lpTokenSymbol the short symbol for the token to be deployed
     * @param _a the amplification coefficient * n * (n - 1). See the
     * StableSwap paper for details
     * @param _fee default swap fee to be initialized with
     * @param _adminFee default adminFee to be initialized with
     */
    function initialize(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress
    ) public virtual override initializer {
        revert("use initializeMetaSwap() instead");
    }

    /**
     * @notice Initializes this MetaSwap contract with the given parameters.
     * MetaSwap uses an existing Swap pool to expand the available liquidity.
     * _pooledTokens array should contain the base Swap pool's LP token as
     * the last element. For example, if there is a Swap pool consisting of
     * [DAI, USDC, USDT]. Then a MetaSwap pool can be created with [sUSD, BaseSwapLPToken]
     * as _pooledTokens.
     *
     * This will also deploy the LPToken that represents users'
     * LP position. The owner of LPToken will be this contract - which means
     * only this contract is allowed to mint new tokens.
     *
     * @param _pooledTokens an array of ERC20s this pool will accept. The last
     * element must be an existing Swap pool's LP token's address.
     * @param decimals the decimals to use for each pooled token,
     * eg 8 for WBTC. Cannot be larger than POOL_PRECISION_DECIMALS
     * @param lpTokenName the long-form name of the token to be deployed
     * @param lpTokenSymbol the short symbol for the token to be deployed
     * @param _a the amplification coefficient * n * (n - 1). See the
     * StableSwap paper for details
     * @param _fee default swap fee to be initialized with
     * @param _adminFee default adminFee to be initialized with
     */
    function initializeMetaSwap(
        IERC20[] memory _pooledTokens,
        uint8[] memory decimals,
        string memory lpTokenName,
        string memory lpTokenSymbol,
        uint256 _a,
        uint256 _fee,
        uint256 _adminFee,
        address lpTokenTargetAddress,
        ISwap baseSwap
    ) external virtual initializer {
        Swap.initialize(
            _pooledTokens,
            decimals,
            lpTokenName,
            lpTokenSymbol,
            _a,
            _fee,
            _adminFee,
            lpTokenTargetAddress
        );

        // MetaSwap initializer
        metaSwapStorage.baseSwap = baseSwap;
        metaSwapStorage.baseVirtualPrice = baseSwap.getVirtualPrice();
        metaSwapStorage.baseCacheLastUpdated = block.timestamp;

        // Read all tokens that belong to baseSwap
        {
            uint8 i;
            for (; i < 32; i++) {
                try baseSwap.getToken(i) returns (IERC20 token) {
                    metaSwapStorage.baseTokens.push(token);
                    token.safeApprove(address(baseSwap), MAX_UINT256);
                } catch {
                    break;
                }
            }
            require(i > 1, "baseSwap must pool at least 2 tokens");
        }

        // Check the last element of _pooledTokens is owned by baseSwap
        IERC20 baseLPToken = _pooledTokens[_pooledTokens.length - 1];
        require(
            LPToken(address(baseLPToken)).owner() == address(baseSwap),
            "baseLPToken is not owned by baseSwap"
        );

        // Pre-approve the baseLPToken to be used by baseSwap
        baseLPToken.safeApprove(address(baseSwap), MAX_UINT256);
    }

    /**
     * @notice Swap two tokens using this pool
     * @param tokenIndexFrom the token the user wants to swap from
     * @param tokenIndexTo the token the user wants to swap to
     * @param dx the amount of tokens the user wants to swap from
     * @param minDy the min amount the user would like to receive, or revert.
     * @param deadline latest timestamp to accept this transaction
     */
    function swap(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    )
        external
        virtual
        override
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return
            MetaSwapUtils.swap(
                swapStorage,
                metaSwapStorage,
                tokenIndexFrom,
                tokenIndexTo,
                dx,
                minDy
            );
    }

    /**
     * @notice Swap two tokens using this pool and the base pool.
     * @param tokenIndexFrom the token the user wants to swap from
     * @param tokenIndexTo the token the user wants to swap to
     * @param dx the amount of tokens the user wants to swap from
     * @param minDy the min amount the user would like to receive, or revert.
     * @param deadline latest timestamp to accept this transaction
     */
    function swapUnderlying(
        uint8 tokenIndexFrom,
        uint8 tokenIndexTo,
        uint256 dx,
        uint256 minDy,
        uint256 deadline
    )
        external
        virtual
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return
            MetaSwapUtils.swapUnderlying(
                swapStorage,
                metaSwapStorage,
                tokenIndexFrom,
                tokenIndexTo,
                dx,
                minDy
            );
    }

    /**
     * @notice Add liquidity to the pool with the given amounts of tokens
     * @param amounts the amounts of each token to add, in their native precision
     * @param minToMint the minimum LP tokens adding this amount of liquidity
     * should mint, otherwise revert. Handy for front-running mitigation
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP token user minted and received
     */
    function addLiquidity(
        uint256[] calldata amounts,
        uint256 minToMint,
        uint256 deadline
    )
        external
        virtual
        override
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return
            MetaSwapUtils.addLiquidity(
                swapStorage,
                metaSwapStorage,
                amounts,
                minToMint
            );
    }

    /**
     * @notice Remove liquidity from the pool all in one token. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param tokenAmount the amount of the token you want to receive
     * @param tokenIndex the index of the token you want to receive
     * @param minAmount the minimum amount to withdraw, otherwise revert
     * @param deadline latest timestamp to accept this transaction
     * @return amount of chosen token user received
     */
    function removeLiquidityOneToken(
        uint256 tokenAmount,
        uint8 tokenIndex,
        uint256 minAmount,
        uint256 deadline
    )
        external
        virtual
        override
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return
            MetaSwapUtils.removeLiquidityOneToken(
                swapStorage,
                metaSwapStorage,
                tokenAmount,
                tokenIndex,
                minAmount
            );
    }

    /**
     * @notice Remove liquidity from the pool, weighted differently than the
     * pool's current balances. Withdraw fee that decays linearly
     * over period of 4 weeks since last deposit will apply.
     * @param amounts how much of each token to withdraw
     * @param maxBurnAmount the max LP token provider is willing to pay to
     * remove liquidity. Useful as a front-running mitigation.
     * @param deadline latest timestamp to accept this transaction
     * @return amount of LP tokens burned
     */
    function removeLiquidityImbalance(
        uint256[] calldata amounts,
        uint256 maxBurnAmount,
        uint256 deadline
    )
        external
        virtual
        override
        nonReentrant
        whenNotPaused
        deadlineCheck(deadline)
        returns (uint256)
    {
        return
            MetaSwapUtils.removeLiquidityImbalance(
                swapStorage,
                metaSwapStorage,
                amounts,
                maxBurnAmount
            );
    }
}

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "../../MathUtils.sol";

contract TestMathUtils {
    using MathUtils for uint256;

    function difference(uint256 a, uint256 b) public pure returns (uint256) {
        return a.difference(b);
    }

    function within1(uint256 a, uint256 b) public pure returns (bool) {
        return a.within1(b);
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 10000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  }
}

[{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"provider","type":"address"},{"indexed":false,"internalType":"uint256[]","name":"tokenAmounts","type":"uint256[]"},{"indexed":false,"internalType":"uint256[]","name":"fees","type":"uint256[]"},{"indexed":false,"internalType":"uint256","name":"invariant","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"lpTokenSupply","type":"uint256"}],"name":"AddLiquidity","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"newAdminFee","type":"uint256"}],"name":"NewAdminFee","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"newSwapFee","type":"uint256"}],"name":"NewSwapFee","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"provider","type":"address"},{"indexed":false,"internalType":"uint256[]","name":"tokenAmounts","type":"uint256[]"},{"indexed":false,"internalType":"uint256","name":"lpTokenSupply","type":"uint256"}],"name":"RemoveLiquidity","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"provider","type":"address"},{"indexed":false,"internalType":"uint256[]","name":"tokenAmounts","type":"uint256[]"},{"indexed":false,"internalType":"uint256[]","name":"fees","type":"uint256[]"},{"indexed":false,"internalType":"uint256","name":"invariant","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"lpTokenSupply","type":"uint256"}],"name":"RemoveLiquidityImbalance","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"provider","type":"address"},{"indexed":false,"internalType":"uint256","name":"lpTokenAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"lpTokenSupply","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"boughtId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"tokensBought","type":"uint256"}],"name":"RemoveLiquidityOne","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"buyer","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokensSold","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"tokensBought","type":"uint256"},{"indexed":false,"internalType":"uint128","name":"soldId","type":"uint128"},{"indexed":false,"internalType":"uint128","name":"boughtId","type":"uint128"}],"name":"TokenSwap","type":"event"},{"inputs":[],"name":"MAX_ADMIN_FEE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_SWAP_FEE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"POOL_PRECISION_DECIMALS","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"}]

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

692:36055:45:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3464:50;;;:::i;:::-;;;;;;;;;;;;;;;;;;;35393:455;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;35393:455:45;;;;;;-1:-1:-1;;;;;35393:455:45;;:::i;:::-;;25531:3424;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;25531:3424:45;;-1:-1:-1;;25531:3424:45;;;-1:-1:-1;25531:3424:45;;-1:-1:-1;;25531:3424:45:i;:::-;;;;;;;;;;;;;;;;32552:2663;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;32552:2663:45;;-1:-1:-1;;32552:2663:45;;;-1:-1:-1;32552:2663:45;;-1:-1:-1;;32552:2663:45:i;36533:212::-;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;36533:212:45;;;;;;;:::i;17132:334::-;;;;;;;;;;;;;;;;-1:-1:-1;17132:334:45;;;;;;;;;;;;;;;;;;;;;;;:::i;36086:220::-;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;36086:220:45;;;;;;;:::i;19271:312::-;;;;;;;;;;;;;;;;-1:-1:-1;19271:312:45;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13955:386;;;;;;;;;;;;;;;;-1:-1:-1;13955:386:45;;:::i;29419:1132::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;29419:1132:45;;-1:-1:-1;29419:1132:45;-1:-1:-1;29419:1132:45;:::i;22206:339::-;;;;;;;;;;;;;;;;-1:-1:-1;22206:339:45;;;;;;;:::i;20952:1003::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;20952:1003:45;-1:-1:-1;20952:1003:45;;;;:::i;23445:1579::-;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;23445:1579:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;3782:44::-;;;:::i;4765:387::-;;;;;;;;;;;;;;;;-1:-1:-1;4765:387:45;;;;;;;;;;;;;;:::i;30951:1144::-;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;30951:1144:45;;;;;;;;;;;;;;;;;;;:::i;4069:46::-;;;:::i;3464:50::-;3512:2;3464:50;:::o;35393:455::-;35470:28;35501:4;:17;;35470:48;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;35470:48:45;;;;;;;;;;;;;;;;;;;;;;;35533:9;35528:314;35552:12;:19;35548:1;:23;35528:314;;;35592:12;35607;35620:1;35607:15;;;;;;;;;;;;;;35592:30;;35636:15;35654:82;35706:4;:13;;35720:1;35706:16;;;;;;;;;;;;;;;;35654:5;-1:-1:-1;;;;;35654:15:45;;35678:4;35654:30;;;;;;;;;;;;;-1:-1:-1;;;;;35654:30:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;35654:30:45;;:34;:82::i;:::-;35636:100;-1:-1:-1;35754:12:45;;35750:82;;35786:31;-1:-1:-1;;;;;35786:18:45;;35805:2;35809:7;35786:18;:31::i;:::-;-1:-1:-1;;35573:3:45;;35528:314;;;;35393:455;;;:::o;25531:3424::-;25665:7;25684:28;25715:4;:17;;25684:48;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;25684:48:45;;;;;;;;;;;;;;;;;;;;;;;25781:12;:19;25763:7;:14;:37;25742:116;;;;;-1:-1:-1;;;25742:116:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;25894:28;;:::i;:::-;25925:218;;;;;;;;25958:1;25925:218;;;;25973:1;25925:218;;;;25988:1;25925:218;;;;26003:18;26016:4;26003:12;:18::i;:::-;25925:218;;;;26035:4;:12;;;;;;;;;;-1:-1:-1;;;;;26035:12:45;-1:-1:-1;;;;;25925:218:45;;;;;26061:1;25925:218;;;;26076:4;:13;;25925:218;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26103:4;:30;;25925:218;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;25894:249;;26169:1;:9;;;-1:-1:-1;;;;;26169:21:45;;:23;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;26169:23:45;26153:13;;;:39;;;26207:18;26203:104;;26248:48;26253:30;26257:1;:10;;;26269:1;:13;;;26253:3;:30::i;:::-;26285:1;:10;;;26248:4;:48::i;:::-;26241:55;;26203:104;26317:28;26362:12;:19;26348:34;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;26348:34:45;;26317:65;;26398:9;26393:872;26417:12;:19;26413:1;:23;26393:872;;;26482:13;;;;:18;;;:36;;;26517:1;26504:7;26512:1;26504:10;;;;;;;;;;;;;;:14;26482:36;26457:125;;;;;-1:-1:-1;;;26457:125:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;26678:7;26686:1;26678:10;;;;;;;;;;;;;;26692:1;26678:15;26674:520;;26713:21;26737:12;26750:1;26737:15;;;;;;;;;;;;;;-1:-1:-1;;;;;26737:25:45;;26792:4;26737:78;;;;;;;;;;;;;-1:-1:-1;;;;;26737:78:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;26737:78:45;26954:10;;26737:78;;-1:-1:-1;26833:149:45;;26887:10;;26927:4;;26954:7;;26962:1;;26954:10;;;;;;;;;;;;26833:12;26846:1;26833:15;;;;;;;;;;;;;;-1:-1:-1;;;;;26833:32:45;;;:149;;;;;;:::i;:::-;27082:97;27148:13;27082:12;27095:1;27082:15;;;;;;;;;;;;;;-1:-1:-1;;;;;27082:25:45;;27116:4;27082:40;;;;;;;;;;;;;-1:-1:-1;;;;;27082:40:45;;;;;;;;;;;;;;;;;;;;;;;;;;:97;27069:7;27077:1;27069:10;;;;;;;;;;;;;:110;;;;;26674:520;;27225:29;27243:7;27251:1;27243:10;;;;;;;;;;;;;;27225:1;:10;;;27236:1;27225:13;;;;;;;;;;;;;;:17;;:29;;;;:::i;:::-;27208:11;27220:1;27208:14;;;;;;;;;;;;;;;;;:46;26438:3;;26393:872;;;;27316:49;27321:31;27325:11;27338:1;:13;;;27321:3;:31::i;:::-;27354:1;:10;;;27316:4;:49::i;:::-;27309:4;;;:56;;;27390:4;;-1:-1:-1;27375:41:45;;;;;-1:-1:-1;;;27375:41:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;27504:4;;;;27497;;;:11;27556:19;;27518:21;;27542:34;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;27542:34:45;;27518:58;;27591:1;:13;;;27608:1;27591:18;27587:849;;27625:19;27647:93;27677:4;:12;;;27707;:19;27647:12;:93::i;:::-;27625:115;;27759:9;27754:490;27778:12;:19;27774:1;:23;27754:490;;;27822:20;27845:33;27873:1;:4;;;27845:23;27854:1;:10;;;27865:1;27854:13;;;;;;;;;;;;;;27845:1;:4;;;:8;;:23;;;;:::i;:::-;:27;;:33::i;:::-;27822:56;;27906:119;3720:6;27906:77;27943:39;27967:11;27979:1;27967:14;;;;;;;;;;;;;;27943:12;:23;;:39;;;;:::i;:::-;27906:11;;:36;:77::i;:119::-;27896:4;27901:1;27896:7;;;;;;;;;;;;;:129;;;;;28062:105;28102:47;3720:6;28102:26;28114:4;:13;;;28102:4;28107:1;28102:7;;;;;;;;;;;;;;:11;;:26;;;;:::i;:47::-;28062:11;28074:1;28062:14;;;;;;;;;;;;;;:18;;:105;;;;:::i;:::-;28043:4;:13;;28057:1;28043:16;;;;;;;;;;;;;;;:124;;;;28202:27;28221:4;28226:1;28221:7;;;;;;;;;;;;;;28202:11;28214:1;28202:14;;;;;;;:27;28185:11;28197:1;28185:14;;;;;;;;;;;;;;;;;:44;-1:-1:-1;27799:3:45;;27754:490;;;;28264:49;28269:31;28273:11;28286:1;:13;;;28269:3;:31::i;:::-;28302:1;:10;;;28264:4;:49::i;:::-;28257:4;;;:56;-1:-1:-1;27587:849:45;;;28398:27;;;;:13;;;;:27;;;;;:::i;:::-;;27587:849;28446:14;28474:1;:13;;;28491:1;28474:18;28470:145;;;-1:-1:-1;28517:4:45;;;;28470:145;;;28599:4;;28580:13;;;;28561:4;;;;:43;;28599:4;28561:33;;:14;;28599:4;28561:8;:14::i;:::-;:18;;:33::i;:43::-;28552:52;;28470:145;28643:9;28633:6;:19;;28625:59;;;;;-1:-1:-1;;;28625:59:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;28732:1;:9;;;-1:-1:-1;;;;;28732:14:45;;28747:10;28759:6;28732:34;;;;;;;;;;;;;-1:-1:-1;;;;;28732:34:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28808:10;-1:-1:-1;;;;;28782:142:45;;28832:7;28853:4;28871:1;:4;;;28889:25;28907:6;28889:1;:13;;;:17;;:25;;;;:::i;:::-;28782:142;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;28942:6;-1:-1:-1;;;;;25531:3424:45;;;;;;:::o;32552:2663::-;32700:7;32719:28;;:::i;:::-;32750:218;;;;;;;;32783:1;32750:218;;;;32798:1;32750:218;;;;32813:1;32750:218;;;;32828:18;32841:4;32828:12;:18::i;:::-;32750:218;;;;32860:4;:12;;;;;;;;;;-1:-1:-1;;;;;32860:12:45;-1:-1:-1;;;;;32750:218:45;;;;;32886:1;32750:218;;;;32901:4;:13;;32750:218;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32928:4;:30;;32750:218;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32719:249;;32994:1;:9;;;-1:-1:-1;;;;;32994:21:45;;:23;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;32994:23:45;32978:13;;;:39;33059:17;;;33028:48;;;;;32994:23;33028:48;;;;;;;;;;;;;:28;;:48;;33059:17;;33028:48;;33059:17;33028:48;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;33028:48:45;;;;;;;;;;;;;;;;;;;;;;;33126:12;:19;33108:7;:14;:37;33087:116;;;;;-1:-1:-1;;;33087:116:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;33252:1;:9;;;-1:-1:-1;;;;;33252:19:45;;33272:10;33252:31;;;;;;;;;;;;;-1:-1:-1;;;;;33252:31:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;33252:31:45;33235:48;;;;;:86;;-1:-1:-1;33303:18:45;;;33235:86;33214:146;;;;;-1:-1:-1;;;33214:146:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;33371:19;33393:47;33406:4;:12;;;33420;:19;33393:12;:47::i;:::-;33371:69;;33450:21;33488:12;:19;33474:34;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;33474:34:45;;33450:58;;33532:26;33575:12;:19;33561:34;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;33561:34:45;;33532:63;;33616:48;33621:30;33625:1;:10;;;33637:1;:13;;;33621:3;:30::i;:::-;33653:1;:10;;;33616:4;:48::i;:::-;33609:55;;:4;33678:224;33702:12;:19;33698:1;:23;33678:224;;;33761:126;33800:7;33808:1;33800:10;;;;;;;;;;;;;;33761:126;;;;;;;;;;;;;;;;;:1;:10;;;33772:1;33761:13;;;;;;;;;;;;;;:17;;:126;;;;;:::i;:::-;33746:9;33756:1;33746:12;;;;;;;;;;;;;;;;;:141;33723:3;;33678:224;;;;33922:47;33927:29;33931:9;33942:1;:13;;;33927:3;:29::i;33922:47::-;33915:4;;;:54;33989:9;33984:489;34008:12;:19;34004:1;:23;33984:489;;;34052:20;34075:33;34103:1;:4;;;34075:23;34084:1;:10;;;34095:1;34084:13;;;;;;;;;;;;;;34075:1;:4;;;:8;;:23;;;;:::i;:33::-;34052:56;;34126:18;34147:37;34171:9;34181:1;34171:12;;;;;;;;;;;;;;34147;:23;;:37;;;;:::i;:::-;34126:58;-1:-1:-1;34212:48:45;3720:6;34212:27;:11;34126:58;34212:15;:27::i;:48::-;34202:4;34207:1;34202:7;;;;;;;;;;;;;:58;;;;;34297:103;34335:47;3720:6;34335:26;34347:4;:13;;;34335:4;34340:1;34335:7;;;;;;;:47;34297:9;34307:1;34297:12;;;;;;;:103;34278:4;:13;;34292:1;34278:16;;;;;;;;;;;;;;;:122;;;;34433:25;34450:4;34455:1;34450:7;;;;;;;;;;;;;;34433:9;34443:1;34433:12;;;;;;;:25;34418:9;34428:1;34418:12;;;;;;;;;;;;;;;;;:40;-1:-1:-1;;34029:3:45;;33984:489;;;;34494:47;34499:29;34503:9;34514:1;:13;;;34499:3;:29::i;34494:47::-;34487:4;;;:54;;;34621:4;;34602:13;;;;34561:19;;-1:-1:-1;34583:43:45;;:33;;34602:13;34583:14;;34621:4;;34583:8;:14::i;:43::-;34561:65;-1:-1:-1;34644:16:45;34636:56;;;;;-1:-1:-1;;;34636:56:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;34716:18;:11;34732:1;34716:15;:18::i;:::-;34702:32;;34768:13;34753:11;:28;;34745:68;;;;;-1:-1:-1;;;34745:68:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;34824:1;:9;;;-1:-1:-1;;;;;34824:18:45;;34843:10;34855:11;34824:43;;;;;;;;;;;;;-1:-1:-1;;;;;34824:43:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;34883:9;34878:127;34902:12;:19;34898:1;:23;34878:127;;;34942:52;34971:10;34983:7;34991:1;34983:10;;;;;;;;;;;;;;34942:12;34955:1;34942:15;;;;;;;;;;;;;;-1:-1:-1;;;;;34942:28:45;;;:52;;;;;:::i;:::-;34923:3;;34878:127;;;;35058:10;-1:-1:-1;;;;;35020:159:45;;35082:7;35103:4;35121:1;:4;;;35139:30;35157:11;35139:1;:13;;;:17;;:30;;;;:::i;36533:212::-;3821:5;36619:10;:26;;36611:54;;;;;-1:-1:-1;;;36611:54:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;36675:12;;;:25;;;36716:22;;;;;;;;;;;;;;;;;36533:212;;:::o;17132:334::-;17289:10;17320:139;17348:4;17366:14;17394:12;17420:2;17436:4;:13;;17320:139;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:14;:139::i;:::-;-1:-1:-1;17311:148:45;17132:334;-1:-1:-1;;;;;17132:334:45:o;36086:220::-;4109:6;36174:11;:28;;36166:56;;;;;-1:-1:-1;;;36166:56:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;36232:13;;;:27;;;36275:24;;;;;;;;;;;;;;;;;36086:220;;:::o;19271:312::-;19387:16;19438:138;19481:4;:13;;19438:138;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;19512:6;19536:4;:12;;;;;;;;;;-1:-1:-1;;;;;19536:12:45;-1:-1:-1;;;;;19536:24:45;;:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;19536:26:45;19438:25;:138::i;:::-;19419:157;;19271:312;;;;;:::o;13955:386::-;14046:7;14069:9;14081:35;14086:9;14090:4;14086:3;:9::i;:::-;14097:18;14110:4;14097:12;:18::i;:::-;14081:4;:35::i;:::-;14069:47;;14126:15;14144:4;:12;;;;;;;;;;-1:-1:-1;;;;;14144:12:45;14126:30;;14166:14;14183:7;-1:-1:-1;;;;;14183:19:45;;:21;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;14183:21:45;;-1:-1:-1;14218:10:45;;14214:103;;14251:55;14299:6;14251:43;:1;14257:36;14251:5;:43::i;:55::-;14244:62;;;;;;;14214:103;14333:1;14326:8;;;;;13955:386;;;;:::o;29419:1132::-;29604:12;;;;29657:17;;;29626:48;;;;;;;;;;;;;;;;;;;29558:16;;-1:-1:-1;;;;;29604:12:45;;29558:16;;29626:48;;29657:17;;29626:48;;;29657:17;29626:48;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;29626:48:45;;;;;;;;;;;;;;;;;;;;;;;29702:7;-1:-1:-1;;;;;29702:17:45;;29720:10;29702:29;;;;;;;;;;;;;-1:-1:-1;;;;;29702:29:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;29702:29:45;29692:39;;;29684:65;;;;;-1:-1:-1;;;29684:65:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;29801:19;;29780:40;;29759:119;;;;;-1:-1:-1;;;29759:119:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;29889:25;29917:4;:13;;29889:41;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;29940:19;29962:7;-1:-1:-1;;;;;29962:19:45;;:21;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;29962:21:45;;-1:-1:-1;29994:24:45;30021:102;30060:8;30082:6;29962:21;30021:25;:102::i;:::-;29994:129;;30139:9;30134:262;30158:7;:14;30154:1;:18;30134:262;;;30215:10;;30226:1;30215:13;;;;;;;;;;;;;30201:7;30209:1;30201:10;;;;;;;;;;;;;;:27;;30193:66;;;;;-1:-1:-1;;;30193:66:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;30292:27;30308:7;30316:1;30308:10;;;;;;;;;;;;;;30292:8;30301:1;30292:11;;;;;;;:27;30273:4;:13;;30287:1;30273:16;;;;;;;;;;;;;;;:46;;;;30333:52;30362:10;30374:7;30382:1;30374:10;;;;;;;30333:52;30174:3;;30134:262;;;-1:-1:-1;30406:36:45;;;;;;30423:10;30406:36;;;;;;;;;;;;-1:-1:-1;;;;;30406:16:45;;;;;:36;;;;;-1:-1:-1;;30406:36:45;;;;;;;-1:-1:-1;30406:16:45;:36;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;30474:10:45;;-1:-1:-1;30458:61:45;;-1:-1:-1;30486:7:45;;-1:-1:-1;30495:23:45;:11;30511:6;30495:15;:23::i;:::-;30458:61;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;30537:7;-1:-1:-1;;;;;29419:1132:45;;;;;;;:::o;22206:339::-;22351:17;;;:24;22312:7;;22343:32;;22335:69;;;;;-1:-1:-1;;;22335:69:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;22433:105;22504:4;:13;;22518:5;22504:20;;;;;;;;;;;;;;;;22433:4;:17;;22451:5;22433:24;;;;;;;;;;;;;;;;;;;:49;;;;;;22476:4;22433:49;;;;;;-1:-1:-1;;;;;22433:24:45;;;;:34;;:49;;;;;;;;;;:24;:49;;;;;;;;;;20952:1003;21096:7;21115:9;21127:18;21140:4;21127:12;:18::i;:::-;21115:30;;21155:25;21183:4;:13;;21155:41;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;21206:28;21237:4;:30;;21206:61;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;21278:10;21291:35;21296:26;21300:8;21310:11;21296:3;:26::i;:::-;21324:1;21291:4;:35::i;:::-;21278:48;;21341:9;21336:334;21360:8;:15;21356:1;:19;21336:334;;;21400:7;21396:264;;;21441:27;21457:7;;21465:1;21457:10;;;;;;;;;;;;;21441:8;21450:1;21441:11;;;;;;;:27;21427:8;21436:1;21427:11;;;;;;;;;;;;;:41;;;;;21396:264;;;21521:124;21558:7;;21566:1;21558:10;;;;;;;;;;;;;21521:124;;;;;;;;;;;;;;;;;:8;21530:1;21521:11;;;;;;;:124;21507:8;21516:1;21507:11;;;;;;;;;;;;;:138;;;;;21396:264;21377:3;;21336:334;;;;21679:10;21692:35;21697:26;21701:8;21711:11;21697:3;:26::i;:::-;21725:1;21692:4;:35::i;:::-;21679:48;;21737:19;21759:4;:12;;;;;;;;;;-1:-1:-1;;;;;21759:12:45;-1:-1:-1;;;;;21759:24:45;;:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;21759:26:45;;-1:-1:-1;21796:153:45;;;;21830:35;21862:2;21830:27;21845:11;21830:10;:2;21862;21830:6;:10::i;:35::-;21823:42;;;;;;;;;;21796:153;21903:35;21935:2;21903:27;21918:11;21903:10;21935:2;21910;21903:6;:10::i;23445:1579::-;23611:7;23644:16;23663:4;:17;;23681:14;23663:33;;;;;;;;;;;;;;;;;;;;;23741:31;;;;;;23761:10;23741:31;;;;;;-1:-1:-1;;;;;23663:33:45;;;;-1:-1:-1;23663:33:45;;23741:19;;:31;;;;;;;;;;23663:33;23741:31;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;23741:31:45;23735:37;;;23710:125;;;;;-1:-1:-1;;;23710:125:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;23926:21;23950:9;-1:-1:-1;;;;;23950:19:45;;23978:4;23950:34;;;;;;;;;;;;;-1:-1:-1;;;;;23950:34:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;23950:34:45;;-1:-1:-1;23998:57:45;-1:-1:-1;;;;;23998:26:45;;24025:10;24045:4;24052:2;23998:26;:57::i;:::-;24137:53;24176:13;24137:9;-1:-1:-1;;;;;24137:19:45;;24165:4;24137:34;;;;;;;;;;;;;-1:-1:-1;;;;;24137:34:45;;;;;;;;;;;;;;;;;;;;;;;;;;:53;24132:58;;23445:1579;;24211:10;24231:13;24254:25;24282:4;:13;;24254:41;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;24319:134;24347:4;24365:14;24393:12;24419:2;24435:8;24319:14;:134::i;:::-;24305:148;;-1:-1:-1;24305:148:45;-1:-1:-1;24471:11:45;;;;24463:56;;;;;-1:-1:-1;;;24463:56:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;24530:18;24551:117;24614:4;:30;;24645:12;24614:44;;;;;;;;;;;;;;;;;;24551:45;3720:6;24551:24;24561:4;:13;;;24551:5;:9;;:24;;;;:::i;:117::-;24530:138;;24711:32;24740:2;24711:8;24720:14;24711:24;;;;;;;;;:32;24679:4;:13;;24693:14;24679:29;;;;;;;;;;;;;;;;;:64;;;;24783:68;24831:10;24783:30;24810:2;24783:8;24792:12;24783:22;;;;;;;;;:30;:34;;:68::i;:::-;24753:4;:13;;24767:12;24753:27;;;;;;;;;;;;;;;;;:98;;;;24862:60;24907:10;24919:2;24862:4;:17;;24880:12;24862:31;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;24862:31:45;;:60;:44;:60::i;:::-;24938:59;;;;;;;;;;;;;;;;;;;;;;;;;;;;24948:10;;24938:59;;;;;;;;;;-1:-1:-1;25015:2:45;;-1:-1:-1;;;23445:1579:45;;;;;;;;:::o;3782:44::-;3821:5;3782:44;:::o;4765:387::-;4911:7;4931:28;4965:143;5005:4;5023:11;5048:10;5072:4;:12;;;;;;;;;;-1:-1:-1;;;;;5072:12:45;-1:-1:-1;;;;;5072:24:45;;:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;5072:26:45;4965;:143::i;30951:1144::-;31154:12;;;;31207:17;;;31176:48;;;;;;;;;;;;;;;;;;;31117:7;;-1:-1:-1;;;;;31154:12:45;;31176:28;;:48;;31207:17;;31176:48;;;31207:17;31176:48;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;31176:48:45;;;;;;;;;;;;;;;;;;;;;;;31258:7;-1:-1:-1;;;;;31258:17:45;;31276:10;31258:29;;;;;;;;;;;;;-1:-1:-1;;;;;31258:29:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;31258:29:45;31243:44;;;31235:70;;;;;-1:-1:-1;;;31235:70:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;31336:12;:19;31323:10;:32;;;31315:60;;;;;-1:-1:-1;;;31315:60:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;31386:19;31408:7;-1:-1:-1;;;;;31408:19:45;;:21;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;31408:21:45;;-1:-1:-1;31441:10:45;;31470:128;31510:4;31528:11;31553:10;31408:21;31470:26;:128::i;:::-;31440:158;;;;31623:9;31617:2;:15;;31609:42;;;;;-1:-1:-1;;;31609:42:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;31690:106;31733:53;31740:45;3720:6;31740:24;31750:4;:13;;;31740:5;:9;;:24;;;;:::i;:45::-;31733:2;;:6;:53::i;:::-;31690:4;:13;;31704:10;31690:25;;;;;;;;;;;;;;;;;;:29;;:106;;;;:::i;:::-;31662:4;:13;;31676:10;31662:25;;;;;;;;;;;;;;;;;;:134;;;;31806:41;;;;;;31823:10;31806:41;;;;;;;;;;;;-1:-1:-1;;;;;31806:16:45;;;;;:41;;;;;;;;;;;31662:25;31806:16;:41;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;31857:53;31895:10;31907:2;31857:12;31870:10;31857:24;;;;;;;;;:53;31926:142;;;;;;;;;;;;;;;;;;;;;;;;;;;31958:10;;31926:142;;;;;;;;;;-1:-1:-1;32086:2:45;30951:1144;-1:-1:-1;;;;;;;;30951:1144:45:o;4069:46::-;4109:6;4069:46;:::o;3136:155:14:-;3194:7;3226:1;3221;:6;;3213:49;;;;;-1:-1:-1;;;3213:49:14;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;3279:5:14;;;3136:155::o;704:175:19:-;813:58;;;-1:-1:-1;;;;;813:58:19;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;836:23;813:58;;;786:86;;806:5;;786:19;:86::i;:::-;704:175;;;:::o;4256:134:45:-;4320:7;4346:37;4378:4;4346:31;:37::i;12817:519::-;12989:15;;13048:27;;12941:16;;12989:15;13035:40;;13014:118;;;;;-1:-1:-1;;;13014:118:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;13142:19;13178:9;13164:24;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;13164:24:45;;13142:46;;13203:9;13198:113;13222:9;13218:1;:13;13198:113;;;13260:40;13276:20;13297:1;13276:23;;;;;;;;;;;;;;13260:8;13269:1;13260:11;;;;;;;:40;13252:2;13255:1;13252:5;;;;;;;;;;;;;;;;;:48;13233:3;;13198:113;;;-1:-1:-1;13327:2:45;12817:519;-1:-1:-1;;;;12817:519:45:o;10538:1713::-;10674:9;;10631:7;;;;10712:81;10736:9;10732:1;:13;10712:81;;;10770:12;10776:2;10779:1;10776:5;;;;;;;;;;;;;;10770:1;:5;;:12;;;;:::i;:::-;10766:16;-1:-1:-1;10747:3:45;;10712:81;;;-1:-1:-1;10806:6:45;10802:45;;10835:1;10828:8;;;;;;10802:45;10857:13;10892:1;10857:13;10916:16;:1;10922:9;10916:5;:16::i;:::-;10903:29;;10948:9;10943:1007;4209:3;10963:1;:18;10943:1007;;;11015:1;11002:10;11030:378;11054:9;11050:1;:13;11030:378;;;11093:35;11107:20;11117:9;11107:2;11110:1;11107:5;;;;;;;:20;11093:9;:2;11100:1;11093:6;:9::i;:35::-;11088:40;-1:-1:-1;11065:3:45;;11030:378;;;-1:-1:-1;11429:1:45;;-1:-1:-1;11429:1:45;;11448:415;11634:211;11820:24;11841:2;11820:16;:9;11834:1;11820:13;:16::i;:24::-;11634:156;676:3:32;11634:95:45;11727:1;11634:63;:2;676:3:32;11634:31:45;:63::i;:156::-;:185;;:211::i;:::-;11448:143;11589:1;11448:119;11549:17;:2;11556:9;11549:6;:17::i;:::-;11448:79;676:3:32;11448:26:45;:2;11472:1;11448:23;:26::i;:415::-;11444:419;-1:-1:-1;11881:16:45;11444:419;11891:5;11881:9;:16::i;:::-;11877:63;;;11924:1;11917:8;;;;;;;;;;;11877:63;-1:-1:-1;10983:3:45;;10943:1007;;;-1:-1:-1;12215:29:45;;;-1:-1:-1;;;12215:29:45;;;;;;;;;;;;;;;;;;;;;;;;;;;885:203:19;1012:68;;;-1:-1:-1;;;;;1012:68:19;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1035:27;1012:68;;;985:96;;1005:5;;985:19;:96::i;2690:175:14:-;2748:7;2779:5;;;2802:6;;;;2794:46;;;;;-1:-1:-1;;;2794:46:14;;;;;;;;;;;;;;;;;;;;;;;;;;;22776:193:45;22881:7;22911:51;22938:23;22959:1;22938:16;:9;22952:1;22938:13;:16::i;:23::-;22911:22;:7;22923:9;3538:215:14;3596:7;3619:6;3615:20;;-1:-1:-1;3634:1:14;3627:8;;3615:20;3657:5;;;3661:1;3657;:5;:1;3680:5;;;;;:10;3672:56;;;;-1:-1:-1;;;3672:56:14;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;4217:150;4275:7;4306:1;4302;:5;4294:44;;;;;-1:-1:-1;;;4294:44:14;;;;;;;;;;;;;;;;;;;;;;;;;;;;4359:1;4355;:5;;;;;;;4217:150;-1:-1:-1;;;4217:150:14:o;975:160:36:-;1040:7;1067:1;1063;:5;1059:48;;;-1:-1:-1;1091:5:36;;;1084:12;;1059:48;-1:-1:-1;1123:5:36;;975:160::o;5432:163:14:-;5518:7;5553:12;5545:6;;;;5537:29;;;;-1:-1:-1;;;5537:29:14;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;5583:5:14;;;5432:163::o;18057:888:45:-;18250:10;18262:13;18287:28;18318:4;:30;;18287:61;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18358:19;18380:26;18384:8;18394:11;18380:3;:26::i;:::-;18358:48;;18454:2;:9;18437:14;:26;;;:54;;;;;18482:2;:9;18467:12;:24;;;18437:54;18416:125;;;;;-1:-1:-1;;;18416:125:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;18551:9;18563:59;18603:2;18606:14;18603:18;;;;;;;;;;;;;;;;18563:35;18570:11;18582:14;18570:27;;;;;;;;;;;;;;;;18563:2;:6;;:35;;;;:::i;:59::-;18551:71;;18632:9;18644:131;18662:18;18675:4;18662:12;:18::i;:::-;18694:14;18722:12;18748:1;18763:2;18644:4;:131::i;:::-;18632:143;;18790:30;18818:1;18790:23;18811:1;18790:2;18793:12;18790:16;;;;;;;;;:30;18785:35;;18838:41;3720:6;18838:20;18845:4;:12;;;18838:2;:6;;:20;;;;:::i;:41::-;18830:49;;18894:44;18912:11;18924:12;18912:25;;;;;;;;;;;;;;;;18894:13;18901:5;18894:2;:6;;:13;;;;:::i;:44::-;18889:49;;18057:888;;;;;;;;;;;;:::o;19589:473::-;19741:16;19787:11;19777:6;:21;;19769:60;;;;;-1:-1:-1;;;19769:60:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;19840:24;19881:8;:15;19867:30;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;19867:30:45;;19840:57;;19913:9;19908:124;19932:8;:15;19928:1;:19;19908:124;;;19981:40;20009:11;19981:23;19997:6;19981:8;19990:1;19981:11;;;;;;;:40;19968:7;19976:1;19968:10;;;;;;;;;;;;;;;;;:53;19949:3;;19908:124;;13598:147;13653:16;13688:50;13692:4;:13;;13688:50;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13707:4;:30;;13688:50;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:3;:50::i;5158:666::-;5334:7;5343;5362:10;5382:12;5404:16;5454:129;5495:4;5513:10;5537:11;5562;5454:27;:129::i;:::-;5431:152;;;;;;;;;;;;5651:17;5671:113;5781:2;5671:92;5720:4;:30;;5751:10;5720:42;;;;;;;;;;;;;;;;;;;;5671:31;:8;5697:4;5671:25;:31::i;:113::-;5803:2;;;;-1:-1:-1;5158:666:45;;-1:-1:-1;;;;;;;;5158:666:45:o;2967:751:19:-;3386:23;3412:69;3440:4;3412:69;;;;;;;;;;;;;;;;;3420:5;-1:-1:-1;;;;;3412:27:19;;;:69;;;;;:::i;:::-;3495:17;;3386:95;;-1:-1:-1;3495:21:19;3491:221;;3635:10;3624:30;;;;;;;;;;;;;;;-1:-1:-1;3624:30:19;3616:85;;;;-1:-1:-1;;;3616:85:19;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1747:1013:32;1881:16;;;;1950:12;;;;1845:7;;1881:16;2016:15;:20;-1:-1:-1;2012:742:32;;;2065:17;;;;2138:13;;2209:7;;;2205:499;;;2334:109;2366:55;2410:10;:2;2417;2410:6;:10::i;:::-;2366:39;2381:23;:15;2401:2;2381:19;:23::i;:::-;2366:10;:2;2373;2366:6;:10::i;:55::-;2334:2;;:6;:109::i;:::-;2307:136;;;;;;;;2205:499;2580:109;2612:55;2656:10;:2;2663;2656:6;:10::i;:::-;2612:39;2627:23;:15;2647:2;2627:19;:23::i;:::-;2612:10;:2;2619;2612:6;:10::i;:55::-;2580:2;;:6;:109::i;2012:742::-;2741:2;-1:-1:-1;2734:9:32;;-1:-1:-1;2734:9:32;654:115:36;716:4;760:1;740:16;751:1;754;740:10;:16::i;:::-;:21;;;654:115;-1:-1:-1;;;654:115:36:o;14983:1724:45:-;15197:9;;15158:7;;15237:30;;;;;;;;;15216:106;;;;;-1:-1:-1;;;15216:106:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;15370:9;15353:14;:26;;;:54;;;;;15398:9;15383:12;:24;;;15353:54;15332:123;;;;;-1:-1:-1;;;15332:123:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;15466:9;15478:18;15483:2;15487:8;15478:4;:18::i;:::-;15466:30;-1:-1:-1;15466:30:45;15506:9;;15561:23;:9;15575:8;15561:13;:23::i;:::-;15548:36;-1:-1:-1;15595:10:45;;15615:574;15639:9;15635:1;:13;15615:574;;;15678:14;15673:19;;:1;:19;15669:183;;;15717:1;15712:6;;15669:183;;;15748:12;15743:17;;:1;:17;15739:113;;15785:2;15788:1;15785:5;;;;;;;;;;;;;;15780:10;;15739:113;;;15829:8;;15739:113;15869:9;:1;15875:2;15869:5;:9::i;:::-;15865:13;-1:-1:-1;15896:31:45;15909:17;:2;15916:9;15909:6;:17::i;:::-;15896:8;:1;15902;15896:5;:8::i;:31::-;15892:35;;15615:574;15650:3;;15615:574;;;-1:-1:-1;16202:67:45;16251:17;:2;16258:9;16251:6;:17::i;:::-;16202:44;676:3:32;16202:8:45;:1;16208;16202:5;:8::i;:67::-;16198:71;-1:-1:-1;16279:9:45;16291:52;16297:45;16339:2;16297:37;:1;676:3:32;16297:5:45;:37::i;:45::-;16291:1;;:5;:52::i;:::-;16279:64;-1:-1:-1;16353:13:45;16388:1;16353:13;16435:216;4209:3;16455:1;:18;16435:216;;;16502:1;;-1:-1:-1;16502:1:45;;16521:43;16541:22;16561:1;16541:15;16554:1;16541:8;16502:1;16547;16541:5;:8::i;:22::-;16521:15;16534:1;16521:8;16527:1;;16521:5;:8::i;:43::-;16517:47;-1:-1:-1;16582:16:45;16517:47;16592:5;16582:9;:16::i;:::-;16578:63;;;-1:-1:-1;16625:1:45;-1:-1:-1;16618:8:45;;-1:-1:-1;;;;;;;;16618:8:45;16578:63;16475:3;;16435:216;;;-1:-1:-1;16660:40:45;;;-1:-1:-1;;;16660:40:45;;;;;;;;;;;;;;;;;;;;;;;;;;;6140:1830;6354:7;6375;6396;6529:19;6551:9;6555:4;6551:3;:9::i;:::-;6529:31;;6592:2;:9;6579:10;:22;;;6571:59;;;;;-1:-1:-1;;;6571:59:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;6641:52;;:::i;:::-;6696:46;;;;;;;;6728:1;6696:46;;;;6731:1;6696:46;;;;6734:1;6696:46;;;;6737:1;6696:46;;;;6740:1;6696:46;;;6641:101;;6765:18;6778:4;6765:12;:18::i;:::-;6752:10;;;:31;;;6800:20;;6805:2;;6800:4;:20::i;:::-;6793:27;;;6837:48;;6846:38;;6872:11;;6846:21;;:11;;:15;:21::i;:38::-;6837:4;;;:8;:48::i;:::-;6830:4;;;:55;6919:14;;:2;;:14;;;;;;;;;;;;;;;;6904:11;:29;;6896:68;;;;;-1:-1:-1;;;6896:68:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;6984:39;6990:1;:10;;;7002;7014:2;7018:1;:4;;;6984:5;:39::i;:::-;6975:6;;;:48;7077:9;;7034:26;;7063:24;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;7063:24:45;;7034:53;;7114:37;7127:4;:12;;;7141:2;:9;7114:12;:37::i;:::-;7098:13;;;:53;7166:9;7161:566;7185:2;:9;7181:1;:13;7161:566;;;7215:11;7229:2;7232:1;7229:5;;;;;;;;;;;;;;7215:19;;7459:257;7484:218;3720:6;7484:197;7667:1;:13;;;7512:10;7507:15;;:1;:15;7506:138;;7638:4;;7628;;;;7612:32;;7620:23;;:13;;:3;;:7;:13::i;:23::-;7612:3;;:7;:32::i;:::-;7506:138;;;7550:35;7578:1;:6;;;7550:23;7568:1;:4;;;7550:13;7558:1;:4;;;7550:3;:7;;:13;;;;:::i;7459:257::-;7444:9;7454:1;7444:12;;;;;;;;;;;;;;;;;:272;-1:-1:-1;7196:3:45;;7161:566;;;;7737:10;7750:95;7789:46;7795:1;:10;;;7807;7819:9;7830:1;:4;;;7789:5;:46::i;:::-;7750:9;7760:10;7750:21;;;;;;;;;:95;7737:108;;7860:57;7874:4;:30;;7905:10;7874:42;;;;;;;;;;;;;;;;;;;;7860:9;:2;7867:1;7860:6;:9::i;:57::-;7855:62;;7936:2;7940:1;:6;;;7948:2;7951:10;7948:14;;;;;;;;;;;;;;;;7928:35;;;;;;;;;;6140:1830;;;;;;;;:::o;3581:193:25:-;3684:12;3715:52;3737:6;3745:4;3751:1;3754:12;3715:21;:52::i;8851:1274:45:-;9027:9;;8988:7;;9054:22;;;;-1:-1:-1;9046:50:45;;;;;-1:-1:-1;;;9046:50:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;9119:1;9107:9;;9162:16;:1;9168:9;9162:5;:16::i;:::-;9149:29;;9194:9;9189:453;9213:9;9209:1;:13;9189:453;;;9252:10;9247:15;;:1;:15;9243:389;;9286:12;9292:2;9295:1;9292:5;;;;;;;;;;;;;;9286:1;:5;;:12;;;;:::i;:::-;9282:16;;9320:34;9333:20;9343:9;9333:2;9336:1;9333:5;;;;;;;:20;9320:8;:1;9326;9320:5;:8::i;:34::-;9316:38;;9243:389;9224:3;;9189:453;;;-1:-1:-1;9655:67:45;9704:17;:2;9711:9;9704:6;:17::i;:::-;9655:44;676:3:32;9655:8:45;:1;9661;9655:5;:8::i;:67::-;9651:71;-1:-1:-1;9733:9:45;9745:52;9751:45;9793:2;9751:37;:1;676:3:32;9751:5:45;:37::i;9745:52::-;9733:64;-1:-1:-1;9807:13:45;9842:1;9807:13;9853:216;4209:3;9873:1;:18;9853:216;;;9920:1;;-1:-1:-1;9920:1:45;;9939:43;9959:22;9979:1;9959:15;9972:1;9959:8;9920:1;9965;9959:5;:8::i;:22::-;9939:15;9952:1;9939:8;9945:1;;9939:5;:8::i;:43::-;9935:47;-1:-1:-1;10000:16:45;9935:47;10010:5;10000:9;:16::i;:::-;9996:63;;;-1:-1:-1;10043:1:45;-1:-1:-1;10036:8:45;;-1:-1:-1;;;;;;10036:8:45;9996:63;9893:3;;9853:216;;4608:523:25;4735:12;4792:5;4767:21;:30;;4759:81;;;;-1:-1:-1;;;4759:81:25;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;4858:18;4869:6;4858:10;:18::i;:::-;4850:60;;;;;-1:-1:-1;;;4850:60:25;;;;;;;;;;;;;;;;;;;;;;;;;;;;4981:12;4995:23;5022:6;-1:-1:-1;;;;;5022:11:25;5042:5;5050:4;5022:33;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;4980:75;;;;5072:52;5090:7;5099:10;5111:12;5072:17;:52::i;:::-;5065:59;4608:523;-1:-1:-1;;;;;;;4608:523:25:o;726:413::-;1086:20;1124:8;;;726:413::o;7091:725::-;7206:12;7234:7;7230:580;;;-1:-1:-1;7264:10:25;7257:17;;7230:580;7375:17;;:21;7371:429;;7633:10;7627:17;7693:15;7680:10;7676:2;7672:19;7665:44;7582:145;7765:20;;-1:-1:-1;;;7765:20:25;;;;;;;;;;;;;;;;;7772:12;;7765:20;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;:::o;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;:::-;;;;;;;;;;;;;;

ipfs://060a6187b423dfd039618df2673efa5d77c62c64dfcfa6231e18e380d3d211e6