Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.20;

import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

// internal
import "../utils/proxy/ProxyOwned.sol";
import "../utils/proxy/ProxyPausable.sol";
import "../utils/proxy/ProxyReentrancyGuard.sol";

contract ThalesToOverMigration is Initializable, ProxyOwned, ProxyPausable, ProxyReentrancyGuard {
    using SafeERC20 for IERC20;

    error AmountIsZero();

    IERC20 public thalesToken;
    IERC20 public overToken;

    function initialize(address _owner, address _thalesAddress, address _overAddress) external initializer {
        setOwner(_owner);
        initNonReentrant();

        thalesToken = IERC20(_thalesAddress);
        overToken = IERC20(_overAddress);
    }

    /// @notice Exchanges Thales tokens for Over tokens at a 1:1 ratio
    /// @param _amount The amount of Thales tokens to exchange for Over tokens
    /// @dev Burns the Thales tokens and transfers an equal amount of Over tokens to the sender
    function migrateThalesToOver(uint _amount) external nonReentrant notPaused {
        if (_amount == 0) revert AmountIsZero();

        require(overToken.balanceOf(address(this)) >= _amount, "Insufficient OVER token balance");

        // burn Thales
        thalesToken.safeTransferFrom(msg.sender, address(this), _amount);
        // send Over
        overToken.safeTransfer(msg.sender, _amount);

        emit ThalesToOverMigrated(msg.sender, _amount);
    }

    /// @notice Allows the owner to withdraw any ERC20 tokens from the contract
    /// @param _collateral The address of the ERC20 token to withdraw
    /// @param _amount The amount of tokens to withdraw
    function withdrawCollateral(address _collateral, uint _amount) external onlyOwner {
        IERC20(_collateral).safeTransfer(msg.sender, _amount);
        emit WithdrawnCollateral(_collateral, _amount);
    }

    /// @notice Updates the Thales token contract address
    /// @param _thalesAddress The new Thales token contract address
    function setThalesToken(address _thalesAddress) external onlyOwner {
        thalesToken = IERC20(_thalesAddress);
        emit SetThalesToken(_thalesAddress);
    }

    /// @notice Updates the Over token contract address
    /// @param _overAddress The new Over token contract address
    function setOverToken(address _overAddress) external onlyOwner {
        overToken = IERC20(_overAddress);
        emit SetOverToken(_overAddress);
    }

    event ThalesToOverMigrated(address indexed user, uint amount);
    event SetThalesToken(address indexed thalesAddress);
    event SetOverToken(address indexed overAddress);
    event WithdrawnCollateral(address indexed collateral, uint amount);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

// Clone of syntetix contract without constructor
contract ProxyOwned {
    address public owner;
    address public nominatedOwner;
    bool private _initialized;
    bool private _transferredAtInit;

    function setOwner(address _owner) public {
        require(_owner != address(0), "Owner address cannot be 0");
        require(!_initialized, "Already initialized, use nominateNewOwner");
        _initialized = true;
        owner = _owner;
        emit OwnerChanged(address(0), _owner);
    }

    function nominateNewOwner(address _owner) external onlyOwner {
        nominatedOwner = _owner;
        emit OwnerNominated(_owner);
    }

    function acceptOwnership() external {
        require(msg.sender == nominatedOwner, "You must be nominated before you can accept ownership");
        emit OwnerChanged(owner, nominatedOwner);
        owner = nominatedOwner;
        nominatedOwner = address(0);
    }

    function transferOwnershipAtInit(address proxyAddress) external onlyOwner {
        require(proxyAddress != address(0), "Invalid address");
        require(!_transferredAtInit, "Already transferred");
        owner = proxyAddress;
        _transferredAtInit = true;
        emit OwnerChanged(owner, proxyAddress);
    }

    modifier onlyOwner() {
        _onlyOwner();
        _;
    }

    function _onlyOwner() private view {
        require(msg.sender == owner, "Only the contract owner may perform this action");
    }

    event OwnerNominated(address newOwner);
    event OwnerChanged(address oldOwner, address newOwner);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

// Inheritance
import "./ProxyOwned.sol";

// Clone of syntetix contract without constructor
contract ProxyPausable is ProxyOwned {
    uint public lastPauseTime;
    bool public paused;

    /**
     * @notice Change the paused state of the contract
     * @dev Only the contract owner may call this.
     */
    function setPaused(bool _paused) external onlyOwner {
        // Ensure we're actually changing the state before we do anything
        if (_paused == paused) {
            return;
        }

        // Set our paused state.
        paused = _paused;

        // If applicable, set the last pause time.
        if (paused) {
            lastPauseTime = block.timestamp;
        }

        // Let everyone know that our pause state has changed.
        emit PauseChanged(paused);
    }

    event PauseChanged(bool isPaused);

    modifier notPaused() {
        require(!paused, "This action cannot be performed while the contract is paused");
        _;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the `nonReentrant` modifier
 * available, which can be aplied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 */
contract ProxyReentrancyGuard {
    /// @dev counter to allow mutex lock with only one SSTORE operation
    uint256 private _guardCounter;
    bool private _initialized;

    function initNonReentrant() public {
        require(!_initialized, "Already initialized");
        _initialized = true;
        _guardCounter = 1;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call");
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"AmountIsZero","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[],"name":"InvalidInitialization","type":"error"},{"inputs":[],"name":"NotInitializing","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint64","name":"version","type":"uint64"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"oldOwner","type":"address"},{"indexed":false,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnerChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnerNominated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"isPaused","type":"bool"}],"name":"PauseChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"overAddress","type":"address"}],"name":"SetOverToken","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"thalesAddress","type":"address"}],"name":"SetThalesToken","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ThalesToOverMigrated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"collateral","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"WithdrawnCollateral","type":"event"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"initNonReentrant","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"},{"internalType":"address","name":"_thalesAddress","type":"address"},{"internalType":"address","name":"_overAddress","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"lastPauseTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"migrateThalesToOver","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"nominateNewOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"nominatedOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"overToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_overAddress","type":"address"}],"name":"setOverToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"}],"name":"setOwner","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"_paused","type":"bool"}],"name":"setPaused","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_thalesAddress","type":"address"}],"name":"setThalesToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"thalesToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"proxyAddress","type":"address"}],"name":"transferOwnershipAtInit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_collateral","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdrawCollateral","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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