Contract 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 12

 

Contract Overview

Balance:
91 wei

ETH Value:
Less Than $0.01 (@ $3,085.66/ETH)

Token:
Txn Hash Method
Block
From
To
Value [Txn Fee]
0xf6b7b9754c5ce7f4ae046747edd7349763e96e4be85791f605063ac71414a742Set Approval For...2015845452024-04-16 10:21:3013 hrs 39 mins ago0x2e8ce6a88374019720ba759a860885938737ea0a IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000099 0.021487
0x934f1f06241cd5ad490771d779e5c839a1779dc7a788d5200831255130ab5e2bSet Approval For...2015005742024-04-16 4:25:2919 hrs 35 mins ago0x74a8e3065bf81933a4d6778291251f4d7eb177be IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000087 0.01
0xb75507dffe0735add5853c193dd4e2261d38155e5be3fb53c2d24a763fb017c7Set Approval For...2011999352024-04-15 7:17:401 day 16 hrs ago0x55ee2b972b00386baa6c5e3516c64ffcb6770dd5 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000097 0.01
0x2d21bdbb0683cf2674e40aaab4efab490816704c06f200dc1af9b027395c1134Transfer From2009498962024-04-14 13:46:382 days 10 hrs ago0x400e202ae85ec520246ab3d957c33f53af91a6f9 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.000002340.02861
0x84919ad83d2b344e01d2a99d849559f76ed692c95adcc4b3c8fc6c1fa5060528Set Approval For...2008394442024-04-14 6:02:252 days 17 hrs ago0x891cee6bfb6caa72d2a6b39d0bcf1fcab7c02026 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.000000880.01
0x27411e2565f4594e165c8da348f61e605a199877e17d2216741325eff77b99ebSet Approval For...2005354742024-04-13 8:39:523 days 15 hrs ago0xd9d6bad7588c01671c5fc3ddc35eb20f0aeefecc IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000081 0.01
0x25826dc512fb3b83cfac7a38168f2d707ab746c98089cb51bd7748e02ac04e81Set Approval For...1995312292024-04-10 10:21:206 days 13 hrs ago0xfee8cc6d6c058b6dda238df34a0dbcec3dd9761b IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000074 0.01
0xfd589790459cba6fa65c5093253a6d7031fea06e4d8f67f74c5ece66117ef2f2Set Approval For...1993963432024-04-10 0:57:476 days 23 hrs ago0x6482253a76088854d3f44f22f96e4a9174d1d0c1 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.000000940.01
0xdfa63c7f598024a66c5e421d3bde0a8c7f98915ccd2eaaef0fc9c50fbd6fbdc1Set Approval For...1992664102024-04-09 15:53:227 days 8 hrs ago0xfee8cc6d6c058b6dda238df34a0dbcec3dd9761b IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000186 0.01
0x6039d3a41fbc9079e152896a52502cf722bbac8b1d0c7a4e52fdf0cb45acc013Set Approval For...1992499232024-04-09 14:43:447 days 9 hrs ago0xecc42b42128f14cbb4fa34b4da4aa6ec70589127 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000801 0.129823
0x1032855f84372d829754f869a208f732440be80d5db1cdd11c14ec4127716106Safe Transfer Fr...1992362242024-04-09 13:45:577 days 10 hrs ago0x93195d8b2818915baaf8e585e35026e4199601f0 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000191 0.01
0xe77b326d91bd1362baae95bc06db4ce2a7c17317946b5c35201b4604f9e96328Approve1985764422024-04-07 15:44:489 days 8 hrs ago0x9883a6520c38f8763d3333b579d4fb21fd6bf252 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.000001230.01
0xe64abc8adfeb8a50a8af363d108f62aa18de7d1db475dae6ccf08af9da7f8993Set Approval For...1983297312024-04-06 22:34:2710 days 1 hr ago0xd19d407921f5d4772e358121ffee9c802ed73cd4 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000084 0.01
0xa345a0d2e06eee47f9b711a88224bb189adaefcacf17cffec6eafb865cf5f8e6Set Approval For...1982676442024-04-06 18:14:4010 days 5 hrs ago0x2d79a03e0832fd83a1cb050c939deae78f6f4933 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000090.01
0x7f3478425a4b4674088fc18703510c1d99d7fa1b89354b97ba91f2472dc2c4b4Transfer From1981424802024-04-06 9:31:5310 days 14 hrs ago0x11cc16a8199e1f792d08376158121d75198ad9d7 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000109 0.01
0x435bd0faedc37ecdfc943c11de8f83e23720d59dacc5f98ceb10f76113ea926fSet Approval For...1980588452024-04-06 3:42:0510 days 20 hrs ago0x414a32109fb8f771eda757089a33ec2ec50ffe62 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.000000820.01
0x026cbcebc483ae753028a070f40f78b74182982dd4283b51a2191c58516c94eaSet Approval For...1977967792024-04-05 9:24:1111 days 14 hrs ago0x9c94633a35af5a50e015307283d1b3ceec00ecb1 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000123 0.01
0x15eccb82bccd2c8f201c34dde95279e0fe72c591fc5748d9ccc90a0d83da92abSet Approval For...1977066752024-04-05 3:07:3611 days 20 hrs ago0x27734008f60b386f1a595e4a4de261001114d049 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.000000990.01
0xf6cb59d24e7c32df7728a33584ecf8a1239d454f5b7129422ec3b958d0e7bb81Safe Transfer Fr...1976274902024-04-04 21:33:3812 days 2 hrs ago0x28597c954de16990ca0aee3d1120b7f4ec2b904c IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000165 0.01
0x2a8d7bb2b7f5ff0739538fcab64fe82210d816d52e5df9c7e5a459b3478aa42cSet Approval For...1975485552024-04-04 16:03:1512 days 7 hrs ago0x375784a0a182174b5ef39f30476470dd377eedd7 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000145 0.01
0xc65cbd89721efdf04ffa17c4434cec8242aa52e752c542f78ab0b31e3a253e64Set Approval For...1974021702024-04-04 5:52:1012 days 18 hrs ago0x10078403fced9dc501fcd84d859fb22005b2ba45 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00000092 0.01
0xbcb3e908d7eedd6f51dc5e2d1ed605927c400ad1d68e35f1b321d8831fb6ed7dSet Approval For...1968562602024-04-02 15:40:1514 days 8 hrs ago0xd51caf6648e78cdbf275b66b7ca2835557931761 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.00001219 0.013136
0x135da81d3f00d305596acfa6adb72e0bec02629ec60d88ff2fdc035f01fd28a2Set Approval For...1964282222024-04-01 9:46:5715 days 14 hrs ago0xc844e8585520c96fa3767a725cfe93eff7097e7f IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.000006230.01
0xb3c51e051b2a898555c3d7552efa87a8b4048a8eba7c226cbb5dcc78cb680d6eSet Approval For...1960760422024-03-31 9:13:2916 days 14 hrs ago0xd6f0a99180339d32ec90a78ddf792ce711b12128 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.000008770.01
0x7159ad64899aad1cb292cb943788bcfe3a66e203ee3f62a7e074f9b9b631cc21Set Approval For...1959667082024-03-31 1:36:2216 days 22 hrs ago0x0539e459974caa51651616a3e203b356e26ce756 IN  0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0 ETH0.000002520.01
[ Download CSV Export 
Latest 25 internal transaction
Parent Txn Hash Block From To Value
0x9f15e4cbdb1a1ab96e745af14215fa531ac4eebaf3c695f7438ecec25841da5e2016401682024-04-16 14:18:089 hrs 42 mins ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0x9f15e4cbdb1a1ab96e745af14215fa531ac4eebaf3c695f7438ecec25841da5e2016401682024-04-16 14:18:089 hrs 42 mins ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0x452f48cdb53b84dfafe487dc22b8c8816a71bee95d5bd6d378813af8a75a50752015891282024-04-16 10:41:1513 hrs 19 mins ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0x452f48cdb53b84dfafe487dc22b8c8816a71bee95d5bd6d378813af8a75a50752015891282024-04-16 10:41:1513 hrs 19 mins ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0xc226aa5a11494b926dffcf47e35704daf9a80b9a5ab12404f4ca829091b985fd2014585462024-04-16 1:29:1622 hrs 31 mins ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0xc226aa5a11494b926dffcf47e35704daf9a80b9a5ab12404f4ca829091b985fd2014585462024-04-16 1:29:1622 hrs 31 mins ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0x9868f3229d60d46607c6ad1249826630b966b3a7f5f76d6f6bd625605c0620c82014311672024-04-15 23:33:371 day 27 mins ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0x9868f3229d60d46607c6ad1249826630b966b3a7f5f76d6f6bd625605c0620c82014311672024-04-15 23:33:371 day 27 mins ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0x12636cf5082fe8ab8933fc2f6b1bdf1d6e5f84b5c036ef8583d3c1e2e377742d2014310172024-04-15 23:32:591 day 27 mins ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0x12636cf5082fe8ab8933fc2f6b1bdf1d6e5f84b5c036ef8583d3c1e2e377742d2014310172024-04-15 23:32:591 day 27 mins ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0xa2cc15f96e78b505d113d9fe834c58e26f643138fcaa3fd643616e66fb2e5c9f2013646622024-04-15 18:53:161 day 5 hrs ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0xa2cc15f96e78b505d113d9fe834c58e26f643138fcaa3fd643616e66fb2e5c9f2013646622024-04-15 18:53:161 day 5 hrs ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0xf3d6377a3dda1ef27cb548790d41b69ff6fab68f27fa25d76e5866a4447b0f612013519212024-04-15 17:59:231 day 6 hrs ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0xf3d6377a3dda1ef27cb548790d41b69ff6fab68f27fa25d76e5866a4447b0f612013519212024-04-15 17:59:231 day 6 hrs ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0x570a9c5f01eb2688c501754a608b2093153654463e860f9b087a70d5c86b53972012438342024-04-15 10:21:571 day 13 hrs ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0x570a9c5f01eb2688c501754a608b2093153654463e860f9b087a70d5c86b53972012438342024-04-15 10:21:571 day 13 hrs ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0x82ac4d43072549670b835aa9dca58ce5dc7acf57488cf26a0b37c254b3219f4d2012339572024-04-15 9:40:371 day 14 hrs ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0x82ac4d43072549670b835aa9dca58ce5dc7acf57488cf26a0b37c254b3219f4d2012339572024-04-15 9:40:371 day 14 hrs ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0xd4084484b5df1ca3d6aa6405a28aeb9f40231315cb460d1a551bf12fbface5b22012142722024-04-15 8:17:491 day 15 hrs ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0xd4084484b5df1ca3d6aa6405a28aeb9f40231315cb460d1a551bf12fbface5b22012142722024-04-15 8:17:491 day 15 hrs ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0xf7b431aff2d279242b65ca6382958b47636a5458bf23ef6f9d5aa33c365a7a392006824042024-04-13 18:56:453 days 5 hrs ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0xf7b431aff2d279242b65ca6382958b47636a5458bf23ef6f9d5aa33c365a7a392006824042024-04-13 18:56:453 days 5 hrs ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0xf63ee75d16e4a5c3354f2d845f297284c9dc08270db06bfcc5d6a2ed44631fa82006570852024-04-13 17:09:543 days 6 hrs ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
0xf63ee75d16e4a5c3354f2d845f297284c9dc08270db06bfcc5d6a2ed44631fa82006570852024-04-13 17:09:543 days 6 hrs ago 0xfe0855903e32953de8e63ff6585f3fb5a2b4deff 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c0.00044 ETH
0x04ba0a251f0afabdff2f2dd67aa5b8daa6274453693717a758eb847bc59365e02006568902024-04-13 17:09:033 days 6 hrs ago 0x903bc2bd67a31aa628b18cab56bbb33cd7ce2d5c 0x3b1d860ac03aa4faac49e1aed2ca36ceb3da506c0.00044 ETH
[ Download CSV Export 
Loading

Minimal Proxy Contract for 0xe7ae230f1b330866aae93960305fca251eb5f0fb

Contract Name:
DCNT721A

Compiler Version
v0.8.17+commit.8df45f5f

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion
Decompile ByteCode

Contract Source Code (Solidity Standard Json-Input format)

File 1 of 27 : AccessControl.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(account),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

File 2 of 27 : IAccessControl.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

File 3 of 27 : Ownable.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

File 4 of 27 : Initializable.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/Address.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!Address.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Internal function that returns the initialized version. Returns `_initialized`
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Internal function that returns the initialized version. Returns `_initializing`
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

File 5 of 27 : Address.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

File 6 of 27 : Context.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

File 7 of 27 : MerkleProof.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/MerkleProof.sol)

pragma solidity ^0.8.0;

/**
 * @dev These functions deal with verification of Merkle Tree proofs.
 *
 * The tree and the proofs can be generated using our
 * https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
 * You will find a quickstart guide in the readme.
 *
 * WARNING: You should avoid using leaf values that are 64 bytes long prior to
 * hashing, or use a hash function other than keccak256 for hashing leaves.
 * This is because the concatenation of a sorted pair of internal nodes in
 * the merkle tree could be reinterpreted as a leaf value.
 * OpenZeppelin's JavaScript library generates merkle trees that are safe
 * against this attack out of the box.
 */
library MerkleProof {
    /**
     * @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
     * defined by `root`. For this, a `proof` must be provided, containing
     * sibling hashes on the branch from the leaf to the root of the tree. Each
     * pair of leaves and each pair of pre-images are assumed to be sorted.
     */
    function verify(
        bytes32[] memory proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProof(proof, leaf) == root;
    }

    /**
     * @dev Calldata version of {verify}
     *
     * _Available since v4.7._
     */
    function verifyCalldata(
        bytes32[] calldata proof,
        bytes32 root,
        bytes32 leaf
    ) internal pure returns (bool) {
        return processProofCalldata(proof, leaf) == root;
    }

    /**
     * @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
     * from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
     * hash matches the root of the tree. When processing the proof, the pairs
     * of leafs & pre-images are assumed to be sorted.
     *
     * _Available since v4.4._
     */
    function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Calldata version of {processProof}
     *
     * _Available since v4.7._
     */
    function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
        bytes32 computedHash = leaf;
        for (uint256 i = 0; i < proof.length; i++) {
            computedHash = _hashPair(computedHash, proof[i]);
        }
        return computedHash;
    }

    /**
     * @dev Returns true if the `leaves` can be simultaneously proven to be a part of a merkle tree defined by
     * `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerify(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProof(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Calldata version of {multiProofVerify}
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function multiProofVerifyCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32 root,
        bytes32[] memory leaves
    ) internal pure returns (bool) {
        return processMultiProofCalldata(proof, proofFlags, leaves) == root;
    }

    /**
     * @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
     * proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
     * leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
     * respectively.
     *
     * CAUTION: Not all merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
     * is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
     * tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
     *
     * _Available since v4.7._
     */
    function processMultiProof(
        bytes32[] memory proof,
        bool[] memory proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    /**
     * @dev Calldata version of {processMultiProof}.
     *
     * CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
     *
     * _Available since v4.7._
     */
    function processMultiProofCalldata(
        bytes32[] calldata proof,
        bool[] calldata proofFlags,
        bytes32[] memory leaves
    ) internal pure returns (bytes32 merkleRoot) {
        // This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
        // consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
        // `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
        // the merkle tree.
        uint256 leavesLen = leaves.length;
        uint256 totalHashes = proofFlags.length;

        // Check proof validity.
        require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");

        // The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
        // `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
        bytes32[] memory hashes = new bytes32[](totalHashes);
        uint256 leafPos = 0;
        uint256 hashPos = 0;
        uint256 proofPos = 0;
        // At each step, we compute the next hash using two values:
        // - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
        //   get the next hash.
        // - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
        //   `proof` array.
        for (uint256 i = 0; i < totalHashes; i++) {
            bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
            bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
            hashes[i] = _hashPair(a, b);
        }

        if (totalHashes > 0) {
            return hashes[totalHashes - 1];
        } else if (leavesLen > 0) {
            return leaves[0];
        } else {
            return proof[0];
        }
    }

    function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
        return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
    }

    function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, a)
            mstore(0x20, b)
            value := keccak256(0x00, 0x40)
        }
    }
}

File 8 of 27 : ERC165.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

File 9 of 27 : IERC165.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

File 10 of 27 : Math.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10**64) {
                value /= 10**64;
                result += 64;
            }
            if (value >= 10**32) {
                value /= 10**32;
                result += 32;
            }
            if (value >= 10**16) {
                value /= 10**16;
                result += 16;
            }
            if (value >= 10**8) {
                value /= 10**8;
                result += 8;
            }
            if (value >= 10**4) {
                value /= 10**4;
                result += 4;
            }
            if (value >= 10**2) {
                value /= 10**2;
                result += 2;
            }
            if (value >= 10**1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
        }
    }
}

File 11 of 27 : Strings.sol
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}

File 12 of 27 : DCNT721A.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

/*
 ______   _______  _______  _______  _       _________
(  __  \ (  ____ \(  ____ \(  ____ \( (    /|\__   __/
| (  \  )| (    \/| (    \/| (    \/|  \  ( |   ) (
| |   ) || (__    | |      | (__    |   \ | |   | |
| |   | ||  __)   | |      |  __)   | (\ \) |   | |
| |   ) || (      | |      | (      | | \   |   | |
| (__/  )| (____/\| (____/\| (____/\| )  \  |   | |
(______/ (_______/(_______/(_______/|/    )_)   )_(

*/

/// ============ Imports ============

import './erc721a/ERC721A.sol';
import './interfaces/IMetadataRenderer.sol';
import './interfaces/IFeeManager.sol';
import '@openzeppelin/contracts/proxy/utils/Initializable.sol';
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/utils/cryptography/MerkleProof.sol';
import '@openzeppelin/contracts/access/AccessControl.sol';
import './interfaces/ITokenWithBalance.sol';
import './storage/EditionConfig.sol';
import './storage/MetadataConfig.sol';
import './storage/DCNT721AStorage.sol';
import './utils/Splits.sol';
import './utils/Version.sol';
import './utils/OperatorFilterer.sol';

/// @title template NFT contract
contract DCNT721A is
  ERC721A,
  AccessControl,
  OperatorFilterer,
  DCNT721AStorage,
  Initializable,
  Ownable,
  Version(8),
  Splits
{
  struct Edition {
    bool hasAdjustableCap;      // Slot 1: X------------------------------- 1  byte
    bool isSoulbound;           // Slot 1: -X------------------------------ 1  byte
    uint32 maxTokens;           // Slot 1: --XXXX-------------------------- 4  bytes (max: 4,294,967,295)
    uint32 maxTokenPurchase;    // Slot 1: ------XXXX---------------------- 4  bytes (max: 4,294,967,295)
    uint32 presaleStart;        // Slot 1: ----------XXXX------------------ 4  bytes (max: Feburary 7th, 2106)
    uint32 presaleEnd;          // Slot 1: --------------XXXX-------------- 4  bytes (max: Feburary 7th, 2106)
    uint32 saleStart;           // Slot 1: ------------------XXXX---------- 4  bytes (max: Feburary 7th, 2106)
    uint32 saleEnd;             // Slot 1: ----------------------XXXX------ 4  bytes (max: Feburary 7th, 2106)
    uint16 royaltyBPS;          // Slot 1: --------------------------XX---- 2  bytes (max: 65,535)
    uint96 tokenPrice;          // Slot 2: XXXXXXXXXXXX-------------------- 12 bytes (max: 79,228,162,514 ETH)
    address payoutAddress;      // Slot 2: ------------XXXXXXXXXXXXXXXXXXXX 20 bytes
    bytes32 presaleMerkleRoot;  // Slot 3: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 32 bytes
  }

  Edition public edition;

  string public baseURI;
  string internal _contractURI;
  address public metadataRenderer;
  bool public saleIsPaused;

  address public parentIP;

  address public feeManager;

  /// ============ Events ============

  /// @notice Emitted after a successful token claim
  /// @param sender recipient of NFT mint
  /// @param tokenId_ of token minted
  event Minted(address sender, uint256 tokenId_);

  /// ========== Modifier =============
  /// @notice verifies caller has minimum balance to pass through token gate
  modifier verifyTokenGate(bool isPresale) {
    if (tokenGateConfig.tokenAddress != address(0)
      && (tokenGateConfig.saleType == SaleType.ALL ||
          isPresale && tokenGateConfig.saleType == SaleType.PRESALE) ||
          !isPresale && tokenGateConfig.saleType == SaleType.PRIMARY) {
            require(ITokenWithBalance(tokenGateConfig.tokenAddress).balanceOf(msg.sender) >= tokenGateConfig.minBalance, 'do not own required token');
    }

    _;
  }

  modifier onlyAdmin() {
    require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "onlyAdmin");

    _;
  }

  error FeeTransferFailed();

  /// ============ Constructor ============

  function initialize(
    address _owner,
    EditionConfig memory _editionConfig,
    MetadataConfig memory _metadataConfig,
    TokenGateConfig memory _tokenGateConfig,
    address _metadataRenderer
  ) public initializer {
    _transferOwnership(_owner);
    _grantRole(DEFAULT_ADMIN_ROLE, _owner);
    _name = _editionConfig.name;
    _symbol = _editionConfig.symbol;
    _currentIndex = _startTokenId();

    feeManager = _editionConfig.feeManager;
    parentIP = _metadataConfig.parentIP;
    tokenGateConfig = _tokenGateConfig;

    edition = Edition({
      hasAdjustableCap: _editionConfig.hasAdjustableCap,
      isSoulbound: _editionConfig.isSoulbound,
      maxTokens: _editionConfig.maxTokens,
      tokenPrice: _editionConfig.tokenPrice,
      maxTokenPurchase: _editionConfig.maxTokenPurchase,
      presaleMerkleRoot: _editionConfig.presaleMerkleRoot,
      presaleStart: _editionConfig.presaleStart,
      presaleEnd: _editionConfig.presaleEnd,
      saleStart: _editionConfig.saleStart,
      saleEnd: _editionConfig.saleEnd,
      royaltyBPS: _editionConfig.royaltyBPS,
      payoutAddress: _editionConfig.payoutAddress
    });

    if (
      _metadataRenderer != address(0) &&
      _metadataConfig.metadataRendererInit.length > 0
    ) {
      metadataRenderer = _metadataRenderer;
      IMetadataRenderer(_metadataRenderer).initializeWithData(
        _metadataConfig.metadataRendererInit
      );
    } else {
      _contractURI = _metadataConfig.contractURI;
      baseURI = _metadataConfig.metadataURI;
    }
  }

  /**
   * @dev Gets the current minting fee for the specified token.
   * @param quantity The quantity of tokens used to calculate the minting fee.
   * @return fee The current fee for minting the specified token.
   */
  function mintFee(uint256 quantity) external view returns (uint256 fee) {
    if ( feeManager != address(0) ) {
      (fee, ) = IFeeManager(feeManager).calculateFees(edition.tokenPrice, quantity);
    }
  }

  /// @notice purchase nft
  function mint(address to, uint256 numberOfTokens)
    external
    payable
    verifyTokenGate(false)
  {
    uint256 mintIndex = _nextTokenId();
    require(block.timestamp >= edition.saleStart && block.timestamp <= edition.saleEnd, "Sales are not active.");
    require(!saleIsPaused, "Sale must be active to mint");
    require(
      mintIndex + numberOfTokens <= edition.maxTokens,
      "Purchase would exceed max supply"
    );
    require(mintIndex <= edition.maxTokens, "SOLD OUT");

    uint256 fee;
    uint256 commission;

    if ( feeManager != address(0) ) {
      (fee, commission) = IFeeManager(feeManager).calculateFees(edition.tokenPrice, numberOfTokens);
    }

    uint256 totalPrice = (edition.tokenPrice * numberOfTokens) + fee;
    require(msg.value >= totalPrice, "Insufficient funds");

    if ( edition.maxTokenPurchase != 0 ) {
      require(numberOfTokens <= edition.maxTokenPurchase, "Exceeded max number per mint");
    }

    _safeMint(to, numberOfTokens);
    unchecked {
      for (uint256 i = 0; i < numberOfTokens; i++) {
        emit Minted(to, mintIndex++);
      }
    }

    _transferFees(fee + commission);
  }

  /**
   * @dev Internal function to transfer fees to the fee manager.
   * @param fees The amount of funds to transfer.
   */
  function _transferFees(uint256 fees) internal {
    if ( fees > 0 ) {
      (bool success, ) = payable(IFeeManager(feeManager).recipient()).call{value: fees}("");
      if ( ! success ) {
        revert FeeTransferFailed();
      }
    }
  }

  /// @notice allows the owner to "airdrop" users an NFT
  function mintAirdrop(address[] calldata recipients) external onlyAdmin {
    uint256 atId = _nextTokenId();
    uint256 startAt = atId;
    require(atId + recipients.length <= edition.maxTokens,
      "Purchase would exceed max supply"
    );

    unchecked {
      for (
        uint256 endAt = atId + recipients.length;
        atId < endAt;
        atId++
      ) {
        _safeMint(recipients[atId - startAt], 1);
        emit Minted(recipients[atId - startAt], atId);
      }
    }
  }

  /// @notice presale mint function
  function mintPresale(
    address to,
    uint256 quantity,
    uint256 maxQuantity,
    uint256 pricePerToken,
    bytes32[] calldata merkleProof
  )
    external
    payable
    verifyTokenGate(true)
  {
    require (block.timestamp >= edition.presaleStart && block.timestamp <= edition.presaleEnd, 'not presale');
    uint256 mintIndex = _nextTokenId();
    require(!saleIsPaused, "Sale must be active to mint");
    require(
      mintIndex + quantity <= edition.maxTokens,
      "Purchase would exceed max supply"
    );
    require (MerkleProof.verify(
        merkleProof,
        edition.presaleMerkleRoot,
        keccak256(
          // address, uint256, uint256
          abi.encodePacked(to,maxQuantity,pricePerToken)
        )
      ), 'not approved');

    uint256 fee;
    uint256 commission;

    if ( feeManager != address(0) ) {
      (fee, commission) = IFeeManager(feeManager).calculateFees(pricePerToken, quantity);
    }

    uint256 totalPrice = (pricePerToken * quantity) + fee;

    require(msg.value >= totalPrice, "Insufficient funds");
    require(balanceOf(to) + quantity <= maxQuantity, 'minted too many');
    _safeMint(to, quantity);
    _transferFees(fee + commission);
    unchecked {
      for (uint256 i = 0; i < quantity; i++) {
        emit Minted(to, mintIndex++);
      }
    }
  }

  function setPresaleMerkleRoot(bytes32 _presaleMerkleRoot) external onlyAdmin {
    edition.presaleMerkleRoot = _presaleMerkleRoot;
  }

  /// @notice pause or unpause sale
  function flipSaleState() external onlyAdmin {
    saleIsPaused = !saleIsPaused;
  }

  /// @notice is the current sale active
  function saleIsActive() external view returns(bool _saleIsActive) {
    _saleIsActive = (block.timestamp >= edition.saleStart && block.timestamp <= edition.saleEnd) && (!saleIsPaused);
  }

  function MAX_TOKENS() external view returns (uint32) {
    return edition.maxTokens;
  }

  function tokenPrice() external view returns (uint96) {
    return edition.tokenPrice;
  }

  function maxTokenPurchase() external view returns (uint32) {
    return edition.maxTokenPurchase;
  }

  function hasAdjustableCap() external view returns (bool) {
    return edition.hasAdjustableCap;
  }

  function isSoulbound() external view returns (bool) {
    return edition.isSoulbound;
  }

  function royaltyBPS() external view returns (uint16) {
    return edition.royaltyBPS;
  }

  function payoutAddress() external view returns (address) {
    return edition.payoutAddress;
  }

  function presaleMerkleRoot() external view returns (bytes32) {
    return edition.presaleMerkleRoot;
  }

  function presaleStart() external view returns (uint32) {
    return edition.presaleStart;
  }

  function presaleEnd() external view returns (uint32) {
    return edition.presaleEnd;
  }

  function saleStart() external view returns (uint32) {
    return edition.saleStart;
  }

  function saleEnd() external view returns (uint32) {
    return edition.saleEnd;
  }

  function setTokenGate(TokenGateConfig calldata _tokenGateConfig) external onlyAdmin {
    tokenGateConfig = _tokenGateConfig;
  }

  ///change maximum number of tokens available to mint
  function adjustCap(uint32 newCap) external onlyAdmin {
    require(edition.hasAdjustableCap, 'cannot adjust size of this collection');
    require(_nextTokenId() <= newCap, 'cannot decrease cap');
    edition.maxTokens = newCap;
  }

  /// @notice set the payout address, zero address defaults to owner
  function setPayoutAddress(address _payoutAddress) external onlyAdmin {
    edition.payoutAddress = _payoutAddress;
  }

  /// @notice withdraw funds from contract to seller funds recipient
  function withdraw() external {
    require(
      splitWallet == address(0),
      "Cannot withdraw with an active split"
    );

    address to = edition.payoutAddress != address(0) ? edition.payoutAddress : owner();
    (bool success, ) = payable(to).call{value: address(this).balance}("");
    require(success, "Could not withdraw");
  }

  function setBaseURI(string memory uri) external onlyAdmin {
    baseURI = uri;
  }

  function _baseURI() internal view virtual override returns (string memory) {
    return baseURI;
  }

  function setMetadataRenderer(address _metadataRenderer) external onlyAdmin {
    metadataRenderer = _metadataRenderer;
  }

  /// @notice update the contract URI
  function setContractURI(string memory uri) external onlyAdmin {
    _contractURI = uri;
  }

  /// @notice view the current contract URI
  function contractURI()
    public
    view
    virtual
    returns (string memory)
  {
    return (metadataRenderer != address(0))
      ? IMetadataRenderer(metadataRenderer).contractURI()
      : _contractURI;
  }

  /// @notice view the token URI for a given tokenId
  function tokenURI(uint256 tokenId)
    public
    view
    virtual
    override
    returns (string memory)
  {
    if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

    if (metadataRenderer != address(0)) {
      return IMetadataRenderer(metadataRenderer).tokenURI(tokenId);
    }
    return super.tokenURI(tokenId);
  }

  /// @notice save some for creator
  function reserveDCNT(uint256 numReserved) external onlyAdmin {
    uint256 supply = _nextTokenId();
    require(
      supply + numReserved < edition.maxTokens,
      "Purchase would exceed max supply"
    );
    for (uint256 i = 0; i < numReserved; i++) {
      _safeMint(msg.sender, supply + i + 1);
    }
  }

  function royaltyInfo(uint256 tokenId, uint256 salePrice)
    external
    view
    returns (address receiver, uint256 royaltyAmount)
  {
    require(_exists(tokenId), "Nonexistent token");

    if (splitWallet != address(0)) {
      receiver = splitWallet;
    } else if ( edition.payoutAddress != address(0) ) {
      receiver = edition.payoutAddress;
    } else {
      receiver = owner();
    }

    uint256 royaltyPayment = (salePrice * edition.royaltyBPS) / 10_000;

    return (receiver, royaltyPayment);
  }

  function supportsInterface(bytes4 interfaceId)
    public
    view
    virtual
    override(ERC721A, AccessControl)
    returns (bool)
  {
    return
      interfaceId == 0x2a55205a || // ERC2981 interface ID for ERC2981.
      AccessControl.supportsInterface(interfaceId) ||
      ERC721A.supportsInterface(interfaceId) ||
      super.supportsInterface(interfaceId);
  }

  /// @notice update the public sale start time
  function updateSaleStartEnd(uint32 newStart, uint32 newEnd) external onlyAdmin {
    edition.saleStart = newStart;
    edition.saleEnd = newEnd;
  }

  /// @notice update the public sale start time
  function updatePresaleStartEnd(uint32 newStart, uint32 newEnd) external onlyAdmin {
    edition.presaleStart = newStart;
    edition.presaleEnd = newEnd;
  }

  /// @notice update the registration with the operator filter registry
  /// @param enable whether or not to enable the operator filter
  /// @param operatorFilter the address for the operator filter subscription
  function updateOperatorFilter(bool enable, address operatorFilter) external onlyAdmin {
    address self = address(this);
    if (!operatorFilterRegistry.isRegistered(self) && enable) {
      operatorFilterRegistry.registerAndSubscribe(self, operatorFilter);
    } else if (enable) {
      operatorFilterRegistry.subscribe(self, operatorFilter);
    } else {
      operatorFilterRegistry.unsubscribe(self, false);
      operatorFilterRegistry.unregister(self);
    }
  }

  /// @dev Use ERC721A token hook and OperatorFilterer modifier to restrict transfers
  function _beforeTokenTransfers(
    address from,
    address to,
    uint256 , // startTokenId
    uint256   // quantity
  ) internal virtual override onlyAllowedOperator(from) {
    require (!edition.isSoulbound || (from == address(0) || to == address(0)), 'soulbound');
  }

  /// @dev Use OperatorFilterer modifier to restrict approvals
  function setApprovalForAll(
    address operator,
    bool approved
  ) public virtual override onlyAllowedOperatorApproval(operator) {
    super.setApprovalForAll(operator, approved);
  }

  /// @dev Use OperatorFilterer modifier to restrict approvals
  function approve(
    address operator,
    uint256 tokenId
  ) public virtual override onlyAllowedOperatorApproval(operator) {
    super.approve(operator, tokenId);
  }
}

File 13 of 27 : ERC721A.sol
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.2
// Creator: Chiru Labs

pragma solidity ^0.8.4;

import "erc721a/contracts/IERC721A.sol";

/**
 * @dev Interface of ERC721 token receiver.
 */
interface ERC721A__IERC721Receiver {
  function onERC721Received(
    address operator,
    address from,
    uint256 tokenId,
    bytes calldata data
  ) external returns (bytes4);
}

/**
 * @title ERC721A
 *
 * @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
 * Non-Fungible Token Standard, including the Metadata extension.
 * Optimized for lower gas during batch mints.
 *
 * Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
 * starting from `_startTokenId()`.
 *
 * Assumptions:
 *
 * - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
 * - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
 */
contract ERC721A is IERC721A {
  // Reference type for token approval.
  struct TokenApprovalRef {
    address value;
  }

  // =============================================================
  //                           CONSTANTS
  // =============================================================

  // Mask of an entry in packed address data.
  uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;

  // The bit position of `numberMinted` in packed address data.
  uint256 private constant _BITPOS_NUMBER_MINTED = 64;

  // The bit position of `numberBurned` in packed address data.
  uint256 private constant _BITPOS_NUMBER_BURNED = 128;

  // The bit position of `aux` in packed address data.
  uint256 private constant _BITPOS_AUX = 192;

  // Mask of all 256 bits in packed address data except the 64 bits for `aux`.
  uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;

  // The bit position of `startTimestamp` in packed ownership.
  uint256 private constant _BITPOS_START_TIMESTAMP = 160;

  // The bit mask of the `burned` bit in packed ownership.
  uint256 private constant _BITMASK_BURNED = 1 << 224;

  // The bit position of the `nextInitialized` bit in packed ownership.
  uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;

  // The bit mask of the `nextInitialized` bit in packed ownership.
  uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;

  // The bit position of `extraData` in packed ownership.
  uint256 private constant _BITPOS_EXTRA_DATA = 232;

  // Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
  uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;

  // The mask of the lower 160 bits for addresses.
  uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;

  // The maximum `quantity` that can be minted with {_mintERC2309}.
  // This limit is to prevent overflows on the address data entries.
  // For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
  // is required to cause an overflow, which is unrealistic.
  uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;

  // The `Transfer` event signature is given by:
  // `keccak256(bytes("Transfer(address,address,uint256)"))`.
  bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
    0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;

  // =============================================================
  //                            STORAGE
  // =============================================================

  // The next token ID to be minted.
  // internal, set in child initializer
  uint256 internal _currentIndex;

  // The number of tokens burned.
  uint256 private _burnCounter;

  // Token name
  // internal, set in child initializer
  string internal _name;

  // Token symbol
  // internal, set in child initializer
  string internal _symbol;

  // Mapping from token ID to ownership details
  // An empty struct value does not necessarily mean the token is unowned.
  // See {_packedOwnershipOf} implementation for details.
  //
  // Bits Layout:
  // - [0..159]   `addr`
  // - [160..223] `startTimestamp`
  // - [224]      `burned`
  // - [225]      `nextInitialized`
  // - [232..255] `extraData`
  mapping(uint256 => uint256) private _packedOwnerships;

  // Mapping owner address to address data.
  //
  // Bits Layout:
  // - [0..63]    `balance`
  // - [64..127]  `numberMinted`
  // - [128..191] `numberBurned`
  // - [192..255] `aux`
  mapping(address => uint256) private _packedAddressData;

  // Mapping from token ID to approved address.
  mapping(uint256 => TokenApprovalRef) private _tokenApprovals;

  // Mapping from owner to operator approvals
  mapping(address => mapping(address => bool)) private _operatorApprovals;

  // =============================================================
  //                          CONSTRUCTOR
  // =============================================================

  // set _name _symbol and _currentIndex in child initializer
  constructor() {}

  // =============================================================
  //                   TOKEN COUNTING OPERATIONS
  // =============================================================

  /**
   * @dev Returns the starting token ID.
   * To change the starting token ID, please override this function.
   */
  function _startTokenId() internal view virtual returns (uint256) {
    return 0;
  }

  /**
   * @dev Returns the next token ID to be minted.
   */
  function _nextTokenId() internal view virtual returns (uint256) {
    return _currentIndex;
  }

  /**
   * @dev Returns the total number of tokens in existence.
   * Burned tokens will reduce the count.
   * To get the total number of tokens minted, please see {_totalMinted}.
   */
  function totalSupply() public view virtual override returns (uint256) {
    // Counter underflow is impossible as _burnCounter cannot be incremented
    // more than `_currentIndex - _startTokenId()` times.
    unchecked {
      return _currentIndex - _burnCounter - _startTokenId();
    }
  }

  /**
   * @dev Returns the total amount of tokens minted in the contract.
   */
  function _totalMinted() internal view virtual returns (uint256) {
    // Counter underflow is impossible as `_currentIndex` does not decrement,
    // and it is initialized to `_startTokenId()`.
    unchecked {
      return _currentIndex - _startTokenId();
    }
  }

  /**
   * @dev Returns the total number of tokens burned.
   */
  function _totalBurned() internal view virtual returns (uint256) {
    return _burnCounter;
  }

  // =============================================================
  //                    ADDRESS DATA OPERATIONS
  // =============================================================

  /**
   * @dev Returns the number of tokens in `owner`'s account.
   */
  function balanceOf(address owner)
    public
    view
    virtual
    override
    returns (uint256)
  {
    if (owner == address(0)) revert BalanceQueryForZeroAddress();
    return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
  }

  /**
   * Returns the number of tokens minted by `owner`.
   */
  function _numberMinted(address owner) internal view returns (uint256) {
    return
      (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) &
      _BITMASK_ADDRESS_DATA_ENTRY;
  }

  /**
   * Returns the number of tokens burned by or on behalf of `owner`.
   */
  function _numberBurned(address owner) internal view returns (uint256) {
    return
      (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) &
      _BITMASK_ADDRESS_DATA_ENTRY;
  }

  /**
   * Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
   */
  function _getAux(address owner) internal view returns (uint64) {
    return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
  }

  /**
   * Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
   * If there are multiple variables, please pack them into a uint64.
   */
  function _setAux(address owner, uint64 aux) internal virtual {
    uint256 packed = _packedAddressData[owner];
    uint256 auxCasted;
    // Cast `aux` with assembly to avoid redundant masking.
    assembly {
      auxCasted := aux
    }
    packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
    _packedAddressData[owner] = packed;
  }

  // =============================================================
  //                            IERC165
  // =============================================================

  /**
   * @dev Returns true if this contract implements the interface defined by
   * `interfaceId`. See the corresponding
   * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
   * to learn more about how these ids are created.
   *
   * This function call must use less than 30000 gas.
   */
  function supportsInterface(bytes4 interfaceId)
    public
    view
    virtual
    override
    returns (bool)
  {
    // The interface IDs are constants representing the first 4 bytes
    // of the XOR of all function selectors in the interface.
    // See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
    // (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
    return
      interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
      interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
      interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
  }

  // =============================================================
  //                        IERC721Metadata
  // =============================================================

  /**
   * @dev Returns the token collection name.
   */
  function name() public view virtual override returns (string memory) {
    return _name;
  }

  /**
   * @dev Returns the token collection symbol.
   */
  function symbol() public view virtual override returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
   */
  function tokenURI(uint256 tokenId)
    public
    view
    virtual
    override
    returns (string memory)
  {
    if (!_exists(tokenId)) revert URIQueryForNonexistentToken();

    string memory baseURI = _baseURI();
    return
      bytes(baseURI).length != 0
        ? string(abi.encodePacked(baseURI, _toString(tokenId)))
        : "";
  }

  /**
   * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
   * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
   * by default, it can be overridden in child contracts.
   */
  function _baseURI() internal view virtual returns (string memory) {
    return "";
  }

  // =============================================================
  //                     OWNERSHIPS OPERATIONS
  // =============================================================

  /**
   * @dev Returns the owner of the `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function ownerOf(uint256 tokenId)
    public
    view
    virtual
    override
    returns (address)
  {
    return address(uint160(_packedOwnershipOf(tokenId)));
  }

  /**
   * @dev Gas spent here starts off proportional to the maximum mint batch size.
   * It gradually moves to O(1) as tokens get transferred around over time.
   */
  function _ownershipOf(uint256 tokenId)
    internal
    view
    virtual
    returns (TokenOwnership memory)
  {
    return _unpackedOwnership(_packedOwnershipOf(tokenId));
  }

  /**
   * @dev Returns the unpacked `TokenOwnership` struct at `index`.
   */
  function _ownershipAt(uint256 index)
    internal
    view
    virtual
    returns (TokenOwnership memory)
  {
    return _unpackedOwnership(_packedOwnerships[index]);
  }

  /**
   * @dev Initializes the ownership slot minted at `index` for efficiency purposes.
   */
  function _initializeOwnershipAt(uint256 index) internal virtual {
    if (_packedOwnerships[index] == 0) {
      _packedOwnerships[index] = _packedOwnershipOf(index);
    }
  }

  /**
   * Returns the packed ownership data of `tokenId`.
   */
  function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
    uint256 curr = tokenId;

    unchecked {
      if (_startTokenId() <= curr)
        if (curr < _currentIndex) {
          uint256 packed = _packedOwnerships[curr];
          // If not burned.
          if (packed & _BITMASK_BURNED == 0) {
            // Invariant:
            // There will always be an initialized ownership slot
            // (i.e. `ownership.addr != address(0) && ownership.burned == false`)
            // before an unintialized ownership slot
            // (i.e. `ownership.addr == address(0) && ownership.burned == false`)
            // Hence, `curr` will not underflow.
            //
            // We can directly compare the packed value.
            // If the address is zero, packed will be zero.
            while (packed == 0) {
              packed = _packedOwnerships[--curr];
            }
            return packed;
          }
        }
    }
    revert OwnerQueryForNonexistentToken();
  }

  /**
   * @dev Returns the unpacked `TokenOwnership` struct from `packed`.
   */
  function _unpackedOwnership(uint256 packed)
    private
    pure
    returns (TokenOwnership memory ownership)
  {
    ownership.addr = address(uint160(packed));
    ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
    ownership.burned = packed & _BITMASK_BURNED != 0;
    ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
  }

  /**
   * @dev Packs ownership data into a single uint256.
   */
  function _packOwnershipData(address owner, uint256 flags)
    private
    view
    returns (uint256 result)
  {
    assembly {
      // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
      owner := and(owner, _BITMASK_ADDRESS)
      // `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
      result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
    }
  }

  /**
   * @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
   */
  function _nextInitializedFlag(uint256 quantity)
    private
    pure
    returns (uint256 result)
  {
    // For branchless setting of the `nextInitialized` flag.
    assembly {
      // `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
      result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
    }
  }

  // =============================================================
  //                      APPROVAL OPERATIONS
  // =============================================================

  /**
   * @dev Gives permission to `to` to transfer `tokenId` token to another account.
   * The approval is cleared when the token is transferred.
   *
   * Only a single account can be approved at a time, so approving the
   * zero address clears previous approvals.
   *
   * Requirements:
   *
   * - The caller must own the token or be an approved operator.
   * - `tokenId` must exist.
   *
   * Emits an {Approval} event.
   */
  function approve(address to, uint256 tokenId) public virtual override {
    address owner = ownerOf(tokenId);

    if (_msgSenderERC721A() != owner)
      if (!isApprovedForAll(owner, _msgSenderERC721A())) {
        revert ApprovalCallerNotOwnerNorApproved();
      }

    _tokenApprovals[tokenId].value = to;
    emit Approval(owner, to, tokenId);
  }

  /**
   * @dev Returns the account approved for `tokenId` token.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   */
  function getApproved(uint256 tokenId)
    public
    view
    virtual
    override
    returns (address)
  {
    if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();

    return _tokenApprovals[tokenId].value;
  }

  /**
   * @dev Approve or remove `operator` as an operator for the caller.
   * Operators can call {transferFrom} or {safeTransferFrom}
   * for any token owned by the caller.
   *
   * Requirements:
   *
   * - The `operator` cannot be the caller.
   *
   * Emits an {ApprovalForAll} event.
   */
  function setApprovalForAll(address operator, bool approved)
    public
    virtual
    override
  {
    if (operator == _msgSenderERC721A()) revert ApproveToCaller();

    _operatorApprovals[_msgSenderERC721A()][operator] = approved;
    emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
  }

  /**
   * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
   *
   * See {setApprovalForAll}.
   */
  function isApprovedForAll(address owner, address operator)
    public
    view
    virtual
    override
    returns (bool)
  {
    return _operatorApprovals[owner][operator];
  }

  /**
   * @dev Returns whether `tokenId` exists.
   *
   * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
   *
   * Tokens start existing when they are minted. See {_mint}.
   */
  function _exists(uint256 tokenId) internal view virtual returns (bool) {
    return
      _startTokenId() <= tokenId &&
      tokenId < _currentIndex && // If within bounds,
      _packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
  }

  /**
   * @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
   */
  function _isSenderApprovedOrOwner(
    address approvedAddress,
    address owner,
    address msgSender
  ) private pure returns (bool result) {
    assembly {
      // Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
      owner := and(owner, _BITMASK_ADDRESS)
      // Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
      msgSender := and(msgSender, _BITMASK_ADDRESS)
      // `msgSender == owner || msgSender == approvedAddress`.
      result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
    }
  }

  /**
   * @dev Returns the storage slot and value for the approved address of `tokenId`.
   */
  function _getApprovedSlotAndAddress(uint256 tokenId)
    private
    view
    returns (uint256 approvedAddressSlot, address approvedAddress)
  {
    TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
    // The following is equivalent to `approvedAddress = _tokenApprovals[tokenId]`.
    assembly {
      approvedAddressSlot := tokenApproval.slot
      approvedAddress := sload(approvedAddressSlot)
    }
  }

  // =============================================================
  //                      TRANSFER OPERATIONS
  // =============================================================

  /**
   * @dev Transfers `tokenId` from `from` to `to`.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token
   * by either {approve} or {setApprovalForAll}.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address from,
    address to,
    uint256 tokenId
  ) public virtual override {
    uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

    if (address(uint160(prevOwnershipPacked)) != from)
      revert TransferFromIncorrectOwner();

    (
      uint256 approvedAddressSlot,
      address approvedAddress
    ) = _getApprovedSlotAndAddress(tokenId);

    // The nested ifs save around 20+ gas over a compound boolean condition.
    if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
      if (!isApprovedForAll(from, _msgSenderERC721A()))
        revert TransferCallerNotOwnerNorApproved();

    if (to == address(0)) revert TransferToZeroAddress();

    _beforeTokenTransfers(from, to, tokenId, 1);

    // Clear approvals from the previous owner.
    assembly {
      if approvedAddress {
        // This is equivalent to `delete _tokenApprovals[tokenId]`.
        sstore(approvedAddressSlot, 0)
      }
    }

    // Underflow of the sender's balance is impossible because we check for
    // ownership above and the recipient's balance can't realistically overflow.
    // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
    unchecked {
      // We can directly increment and decrement the balances.
      --_packedAddressData[from]; // Updates: `balance -= 1`.
      ++_packedAddressData[to]; // Updates: `balance += 1`.

      // Updates:
      // - `address` to the next owner.
      // - `startTimestamp` to the timestamp of transfering.
      // - `burned` to `false`.
      // - `nextInitialized` to `true`.
      _packedOwnerships[tokenId] = _packOwnershipData(
        to,
        _BITMASK_NEXT_INITIALIZED |
          _nextExtraData(from, to, prevOwnershipPacked)
      );

      // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
      if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
        uint256 nextTokenId = tokenId + 1;
        // If the next slot's address is zero and not burned (i.e. packed value is zero).
        if (_packedOwnerships[nextTokenId] == 0) {
          // If the next slot is within bounds.
          if (nextTokenId != _currentIndex) {
            // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
            _packedOwnerships[nextTokenId] = prevOwnershipPacked;
          }
        }
      }
    }

    emit Transfer(from, to, tokenId);
    _afterTokenTransfers(from, to, tokenId, 1);
  }

  /**
   * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId
  ) public virtual override {
    safeTransferFrom(from, to, tokenId, "");
  }

  /**
   * @dev Safely transfers `tokenId` token from `from` to `to`.
   *
   * Requirements:
   *
   * - `from` cannot be the zero address.
   * - `to` cannot be the zero address.
   * - `tokenId` token must exist and be owned by `from`.
   * - If the caller is not `from`, it must be approved to move this token
   * by either {approve} or {setApprovalForAll}.
   * - If `to` refers to a smart contract, it must implement
   * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
   *
   * Emits a {Transfer} event.
   */
  function safeTransferFrom(
    address from,
    address to,
    uint256 tokenId,
    bytes memory _data
  ) public virtual override {
    transferFrom(from, to, tokenId);
    if (to.code.length != 0)
      if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
        revert TransferToNonERC721ReceiverImplementer();
      }
  }

  /**
   * @dev Hook that is called before a set of serially-ordered token IDs
   * are about to be transferred. This includes minting.
   * And also called before burning one token.
   *
   * `startTokenId` - the first token ID to be transferred.
   * `quantity` - the amount to be transferred.
   *
   * Calling conditions:
   *
   * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
   * transferred to `to`.
   * - When `from` is zero, `tokenId` will be minted for `to`.
   * - When `to` is zero, `tokenId` will be burned by `from`.
   * - `from` and `to` are never both zero.
   */
  function _beforeTokenTransfers(
    address from,
    address to,
    uint256 startTokenId,
    uint256 quantity
  ) internal virtual {}

  /**
   * @dev Hook that is called after a set of serially-ordered token IDs
   * have been transferred. This includes minting.
   * And also called after one token has been burned.
   *
   * `startTokenId` - the first token ID to be transferred.
   * `quantity` - the amount to be transferred.
   *
   * Calling conditions:
   *
   * - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
   * transferred to `to`.
   * - When `from` is zero, `tokenId` has been minted for `to`.
   * - When `to` is zero, `tokenId` has been burned by `from`.
   * - `from` and `to` are never both zero.
   */
  function _afterTokenTransfers(
    address from,
    address to,
    uint256 startTokenId,
    uint256 quantity
  ) internal virtual {}

  /**
   * @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
   *
   * `from` - Previous owner of the given token ID.
   * `to` - Target address that will receive the token.
   * `tokenId` - Token ID to be transferred.
   * `_data` - Optional data to send along with the call.
   *
   * Returns whether the call correctly returned the expected magic value.
   */
  function _checkContractOnERC721Received(
    address from,
    address to,
    uint256 tokenId,
    bytes memory _data
  ) private returns (bool) {
    try
      ERC721A__IERC721Receiver(to).onERC721Received(
        _msgSenderERC721A(),
        from,
        tokenId,
        _data
      )
    returns (bytes4 retval) {
      return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
    } catch (bytes memory reason) {
      if (reason.length == 0) {
        revert TransferToNonERC721ReceiverImplementer();
      } else {
        assembly {
          revert(add(32, reason), mload(reason))
        }
      }
    }
  }

  // =============================================================
  //                        MINT OPERATIONS
  // =============================================================

  /**
   * @dev Mints `quantity` tokens and transfers them to `to`.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - `quantity` must be greater than 0.
   *
   * Emits a {Transfer} event for each mint.
   */
  function _mint(address to, uint256 quantity) internal virtual {
    uint256 startTokenId = _currentIndex;
    if (quantity == 0) revert MintZeroQuantity();

    _beforeTokenTransfers(address(0), to, startTokenId, quantity);

    // Overflows are incredibly unrealistic.
    // `balance` and `numberMinted` have a maximum limit of 2**64.
    // `tokenId` has a maximum limit of 2**256.
    unchecked {
      // Updates:
      // - `balance += quantity`.
      // - `numberMinted += quantity`.
      //
      // We can directly add to the `balance` and `numberMinted`.
      _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

      // Updates:
      // - `address` to the owner.
      // - `startTimestamp` to the timestamp of minting.
      // - `burned` to `false`.
      // - `nextInitialized` to `quantity == 1`.
      _packedOwnerships[startTokenId] = _packOwnershipData(
        to,
        _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
      );

      uint256 toMasked;
      uint256 end = startTokenId + quantity;

      // Use assembly to loop and emit the `Transfer` event for gas savings.
      assembly {
        // Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
        toMasked := and(to, _BITMASK_ADDRESS)
        // Emit the `Transfer` event.
        log4(
          0, // Start of data (0, since no data).
          0, // End of data (0, since no data).
          _TRANSFER_EVENT_SIGNATURE, // Signature.
          0, // `address(0)`.
          toMasked, // `to`.
          startTokenId // `tokenId`.
        )

        for {
          let tokenId := add(startTokenId, 1)
        } iszero(eq(tokenId, end)) {
          tokenId := add(tokenId, 1)
        } {
          // Emit the `Transfer` event. Similar to above.
          log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
        }
      }
      if (toMasked == 0) revert MintToZeroAddress();

      _currentIndex = end;
    }
    _afterTokenTransfers(address(0), to, startTokenId, quantity);
  }

  /**
   * @dev Mints `quantity` tokens and transfers them to `to`.
   *
   * This function is intended for efficient minting only during contract creation.
   *
   * It emits only one {ConsecutiveTransfer} as defined in
   * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
   * instead of a sequence of {Transfer} event(s).
   *
   * Calling this function outside of contract creation WILL make your contract
   * non-compliant with the ERC721 standard.
   * For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
   * {ConsecutiveTransfer} event is only permissible during contract creation.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   * - `quantity` must be greater than 0.
   *
   * Emits a {ConsecutiveTransfer} event.
   */
  function _mintERC2309(address to, uint256 quantity) internal virtual {
    uint256 startTokenId = _currentIndex;
    if (to == address(0)) revert MintToZeroAddress();
    if (quantity == 0) revert MintZeroQuantity();
    if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT)
      revert MintERC2309QuantityExceedsLimit();

    _beforeTokenTransfers(address(0), to, startTokenId, quantity);

    // Overflows are unrealistic due to the above check for `quantity` to be below the limit.
    unchecked {
      // Updates:
      // - `balance += quantity`.
      // - `numberMinted += quantity`.
      //
      // We can directly add to the `balance` and `numberMinted`.
      _packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);

      // Updates:
      // - `address` to the owner.
      // - `startTimestamp` to the timestamp of minting.
      // - `burned` to `false`.
      // - `nextInitialized` to `quantity == 1`.
      _packedOwnerships[startTokenId] = _packOwnershipData(
        to,
        _nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
      );

      emit ConsecutiveTransfer(
        startTokenId,
        startTokenId + quantity - 1,
        address(0),
        to
      );

      _currentIndex = startTokenId + quantity;
    }
    _afterTokenTransfers(address(0), to, startTokenId, quantity);
  }

  /**
   * @dev Safely mints `quantity` tokens and transfers them to `to`.
   *
   * Requirements:
   *
   * - If `to` refers to a smart contract, it must implement
   * {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
   * - `quantity` must be greater than 0.
   *
   * See {_mint}.
   *
   * Emits a {Transfer} event for each mint.
   */
  function _safeMint(
    address to,
    uint256 quantity,
    bytes memory _data
  ) internal virtual {
    _mint(to, quantity);

    unchecked {
      if (to.code.length != 0) {
        uint256 end = _currentIndex;
        uint256 index = end - quantity;
        do {
          if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
            revert TransferToNonERC721ReceiverImplementer();
          }
        } while (index < end);
        // Reentrancy protection.
        if (_currentIndex != end) revert();
      }
    }
  }

  /**
   * @dev Equivalent to `_safeMint(to, quantity, '')`.
   */
  function _safeMint(address to, uint256 quantity) internal virtual {
    _safeMint(to, quantity, "");
  }

  // =============================================================
  //                        BURN OPERATIONS
  // =============================================================

  /**
   * @dev Equivalent to `_burn(tokenId, false)`.
   */
  function _burn(uint256 tokenId) internal virtual {
    _burn(tokenId, false);
  }

  /**
   * @dev Destroys `tokenId`.
   * The approval is cleared when the token is burned.
   *
   * Requirements:
   *
   * - `tokenId` must exist.
   *
   * Emits a {Transfer} event.
   */
  function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
    uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);

    address from = address(uint160(prevOwnershipPacked));

    (
      uint256 approvedAddressSlot,
      address approvedAddress
    ) = _getApprovedSlotAndAddress(tokenId);

    if (approvalCheck) {
      // The nested ifs save around 20+ gas over a compound boolean condition.
      if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
        if (!isApprovedForAll(from, _msgSenderERC721A()))
          revert TransferCallerNotOwnerNorApproved();
    }

    _beforeTokenTransfers(from, address(0), tokenId, 1);

    // Clear approvals from the previous owner.
    assembly {
      if approvedAddress {
        // This is equivalent to `delete _tokenApprovals[tokenId]`.
        sstore(approvedAddressSlot, 0)
      }
    }

    // Underflow of the sender's balance is impossible because we check for
    // ownership above and the recipient's balance can't realistically overflow.
    // Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
    unchecked {
      // Updates:
      // - `balance -= 1`.
      // - `numberBurned += 1`.
      //
      // We can directly decrement the balance, and increment the number burned.
      // This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
      _packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;

      // Updates:
      // - `address` to the last owner.
      // - `startTimestamp` to the timestamp of burning.
      // - `burned` to `true`.
      // - `nextInitialized` to `true`.
      _packedOwnerships[tokenId] = _packOwnershipData(
        from,
        (_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) |
          _nextExtraData(from, address(0), prevOwnershipPacked)
      );

      // If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
      if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
        uint256 nextTokenId = tokenId + 1;
        // If the next slot's address is zero and not burned (i.e. packed value is zero).
        if (_packedOwnerships[nextTokenId] == 0) {
          // If the next slot is within bounds.
          if (nextTokenId != _currentIndex) {
            // Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
            _packedOwnerships[nextTokenId] = prevOwnershipPacked;
          }
        }
      }
    }

    emit Transfer(from, address(0), tokenId);
    _afterTokenTransfers(from, address(0), tokenId, 1);

    // Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
    unchecked {
      _burnCounter++;
    }
  }

  // =============================================================
  //                     EXTRA DATA OPERATIONS
  // =============================================================

  /**
   * @dev Directly sets the extra data for the ownership data `index`.
   */
  function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
    uint256 packed = _packedOwnerships[index];
    if (packed == 0) revert OwnershipNotInitializedForExtraData();
    uint256 extraDataCasted;
    // Cast `extraData` with assembly to avoid redundant masking.
    assembly {
      extraDataCasted := extraData
    }
    packed =
      (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) |
      (extraDataCasted << _BITPOS_EXTRA_DATA);
    _packedOwnerships[index] = packed;
  }

  /**
   * @dev Called during each token transfer to set the 24bit `extraData` field.
   * Intended to be overridden by the cosumer contract.
   *
   * `previousExtraData` - the value of `extraData` before transfer.
   *
   * Calling conditions:
   *
   * - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
   * transferred to `to`.
   * - When `from` is zero, `tokenId` will be minted for `to`.
   * - When `to` is zero, `tokenId` will be burned by `from`.
   * - `from` and `to` are never both zero.
   */
  function _extraData(
    address from,
    address to,
    uint24 previousExtraData
  ) internal view virtual returns (uint24) {}

  /**
   * @dev Returns the next extra data for the packed ownership data.
   * The returned result is shifted into position.
   */
  function _nextExtraData(
    address from,
    address to,
    uint256 prevOwnershipPacked
  ) private view returns (uint256) {
    uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
    return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
  }

  // =============================================================
  //                       OTHER OPERATIONS
  // =============================================================

  /**
   * @dev Returns the message sender (defaults to `msg.sender`).
   *
   * If you are writing GSN compatible contracts, you need to override this function.
   */
  function _msgSenderERC721A() internal view virtual returns (address) {
    return msg.sender;
  }

  /**
   * @dev Converts a uint256 to its ASCII string decimal representation.
   */
  function _toString(uint256 value)
    internal
    pure
    virtual
    returns (string memory str)
  {
    assembly {
      // The maximum value of a uint256 contains 78 digits (1 byte per digit),
      // but we allocate 0x80 bytes to keep the free memory pointer 32-byte word aliged.
      // We will need 1 32-byte word to store the length,
      // and 3 32-byte words to store a maximum of 78 digits. Total: 0x20 + 3 * 0x20 = 0x80.
      str := add(mload(0x40), 0x80)
      // Update the free memory pointer to allocate.
      mstore(0x40, str)

      // Cache the end of the memory to calculate the length later.
      let end := str

      // We write the string from rightmost digit to leftmost digit.
      // The following is essentially a do-while loop that also handles the zero case.
      // prettier-ignore
      for { let temp := value } 1 {} {
                str := sub(str, 1)
                // Write the character to the pointer.
                // The ASCII index of the '0' character is 48.
                mstore8(str, add(48, mod(temp, 10)))
                // Keep dividing `temp` until zero.
                temp := div(temp, 10)
                // prettier-ignore
                if iszero(temp) { break }
            }

      let length := sub(end, str)
      // Move the pointer 32 bytes leftwards to make room for the length.
      str := sub(str, 0x20)
      // Store the length.
      mstore(str, length)
    }
  }
}

File 14 of 27 : IFeeManager.sol
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

interface IFeeManager {

  error SplitsAreActive();

  error WithdrawFailed();

  function setFees(uint256 _fee, uint256 _commissionBPS) external;

  function calculateFees(uint256 salePrice, uint256 quantity) external view returns (uint256 fee, uint256 commission);

  function recipient() external view returns (address);

}

File 15 of 27 : IMetadataRenderer.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface IMetadataRenderer {
  function tokenURI(uint256) external view returns (string memory);

  function contractURI() external view returns (string memory);

  function initializeWithData(bytes memory initData) external;

  /// @notice Storage for token edition information
  struct TokenEditionInfo {
    string description;
    string imageURI;
    string animationURI;
  }
}

File 16 of 27 : ITokenWithBalance.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

interface ITokenWithBalance {
  function balanceOf(address owner) external
    returns (uint256);
}

File 17 of 27 : ISplitMain.sol
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.4;

import {ERC20} from "solmate/src/tokens/ERC20.sol";

/**
 * @title ISplitMain
 * @author 0xSplits <[email protected]>
 */
interface ISplitMain {
  /**
   * FUNCTIONS
   */

  function walletImplementation() external returns (address);

  function createSplit(
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee,
    address controller
  ) external returns (address);

  function predictImmutableSplitAddress(
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee
  ) external view returns (address);

  function updateSplit(
    address split,
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee
  ) external;

  function transferControl(address split, address newController) external;

  function cancelControlTransfer(address split) external;

  function acceptControl(address split) external;

  function makeSplitImmutable(address split) external;

  function distributeETH(
    address split,
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee,
    address distributorAddress
  ) external;

  function updateAndDistributeETH(
    address split,
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee,
    address distributorAddress
  ) external;

  function distributeERC20(
    address split,
    ERC20 token,
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee,
    address distributorAddress
  ) external;

  function updateAndDistributeERC20(
    address split,
    ERC20 token,
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee,
    address distributorAddress
  ) external;

  function withdraw(
    address account,
    uint256 withdrawETH,
    ERC20[] calldata tokens
  ) external;

  /**
   * EVENTS
   */

  /** @notice emitted after each successful split creation
   *  @param split Address of the created split
   */
  event CreateSplit(address indexed split);

  /** @notice emitted after each successful split update
   *  @param split Address of the updated split
   */
  event UpdateSplit(address indexed split);

  /** @notice emitted after each initiated split control transfer
   *  @param split Address of the split control transfer was initiated for
   *  @param newPotentialController Address of the split's new potential controller
   */
  event InitiateControlTransfer(
    address indexed split,
    address indexed newPotentialController
  );

  /** @notice emitted after each canceled split control transfer
   *  @param split Address of the split control transfer was canceled for
   */
  event CancelControlTransfer(address indexed split);

  /** @notice emitted after each successful split control transfer
   *  @param split Address of the split control was transferred for
   *  @param previousController Address of the split's previous controller
   *  @param newController Address of the split's new controller
   */
  event ControlTransfer(
    address indexed split,
    address indexed previousController,
    address indexed newController
  );

  /** @notice emitted after each successful ETH balance split
   *  @param split Address of the split that distributed its balance
   *  @param amount Amount of ETH distributed
   *  @param distributorAddress Address to credit distributor fee to
   */
  event DistributeETH(
    address indexed split,
    uint256 amount,
    address indexed distributorAddress
  );

  /** @notice emitted after each successful ERC20 balance split
   *  @param split Address of the split that distributed its balance
   *  @param token Address of ERC20 distributed
   *  @param amount Amount of ERC20 distributed
   *  @param distributorAddress Address to credit distributor fee to
   */
  event DistributeERC20(
    address indexed split,
    ERC20 indexed token,
    uint256 amount,
    address indexed distributorAddress
  );

  /** @notice emitted after each successful withdrawal
   *  @param account Address that funds were withdrawn to
   *  @param ethAmount Amount of ETH withdrawn
   *  @param tokens Addresses of ERC20s withdrawn
   *  @param tokenAmounts Amounts of corresponding ERC20s withdrawn
   */
  event Withdrawal(
    address indexed account,
    uint256 ethAmount,
    ERC20[] tokens,
    uint256[] tokenAmounts
  );
}

File 18 of 27 : DCNT721AStorage.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import './TokenGateConfig.sol';

contract DCNT721AStorage {
  /// @notice token gating
  TokenGateConfig public tokenGateConfig;
}

File 19 of 27 : EditionConfig.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

struct EditionConfig {
  string name;
  string symbol;
  bool hasAdjustableCap;
  bool isSoulbound;
  uint32 maxTokens;
  uint32 maxTokenPurchase;
  uint32 presaleStart;
  uint32 presaleEnd;
  uint32 saleStart;
  uint32 saleEnd;
  uint16 royaltyBPS;
  uint96 tokenPrice;
  address feeManager;
  address payoutAddress;
  bytes32 presaleMerkleRoot;
}

File 20 of 27 : MetadataConfig.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

struct MetadataConfig {
  string contractURI;
  string metadataURI;
  bytes metadataRendererInit;
  address parentIP;
}

File 21 of 27 : TokenGateConfig.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

enum SaleType {
  ALL,
  PRESALE,
  PRIMARY
}

struct TokenGateConfig {
  address tokenAddress; 
  uint88 minBalance;
  SaleType saleType;
}

File 22 of 27 : OperatorFilterer.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;

import {IOperatorFilterRegistry} from "operator-filter-registry/src/IOperatorFilterRegistry.sol";

/**
 * @title  OperatorFilterer
 * @notice Abstract contract whose constructor automatically registers and optionally subscribes to or copies another
 *     registrant's entries in the OperatorFilterRegistry.
 * @dev  This smart contract is meant to be inherited by token contracts so they can use the following:
 *     - `onlyAllowedOperator` modifier for `transferFrom` and `safeTransferFrom` methods.
 *     - `onlyAllowedOperatorApproval` modifier for `approve` and `setApprovalForAll` methods.
 */
abstract contract OperatorFilterer {
  error OperatorNotAllowed(address operator);

  IOperatorFilterRegistry public constant operatorFilterRegistry =
    IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);

  modifier onlyAllowedOperator(address from) virtual {
    // Allow spending tokens from addresses with balance
    // Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
    // from an EOA.
    if (from != msg.sender) {
      _checkFilterOperator(msg.sender);
    }
    _;
  }

  modifier onlyAllowedOperatorApproval(address operator) virtual {
    _checkFilterOperator(operator);
    _;
  }

  function _checkFilterOperator(address operator) internal view virtual {
    // Check registry code length to facilitate testing in environments without a deployed registry.
    if (address(operatorFilterRegistry).code.length > 0) {
      if (!operatorFilterRegistry.isOperatorAllowed(address(this), operator)) {
        revert OperatorNotAllowed(operator);
      }
    }
  }
}

File 23 of 27 : Splits.sol
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8;

import {ERC20} from "solmate/src/tokens/ERC20.sol";
import "../splits/interfaces/ISplitMain.sol";
import "@openzeppelin/contracts/access/Ownable.sol";

abstract contract Splits is Ownable {

  address public splitMain;
  address public splitWallet;

  function createSplit(
    address _splitMain,
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee
  ) public virtual onlyOwner {
    require(splitWallet == address(0), "Split already created");
    splitMain = _splitMain;
    splitWallet = ISplitMain(splitMain).createSplit(
      accounts,
      percentAllocations,
      distributorFee,
      msg.sender
    );
  }

  function distributeETH(
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee,
    address distributorAddress
  ) public virtual requireSplit {
    _transferETHToSplit();
    ISplitMain(splitMain).distributeETH(
      splitWallet,
      accounts,
      percentAllocations,
      distributorFee,
      distributorAddress
    );
  }

  function distributeERC20(
    ERC20 token,
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee,
    address distributorAddress
  ) public virtual requireSplit {
    _transferERC20ToSplit(token);
    ISplitMain(splitMain).distributeERC20(
      splitWallet,
      token,
      accounts,
      percentAllocations,
      distributorFee,
      distributorAddress
    );
  }

  function distributeAndWithdraw(
    address account,
    uint256 withdrawETH,
    ERC20[] memory tokens,
    address[] calldata accounts,
    uint32[] calldata percentAllocations,
    uint32 distributorFee,
    address distributorAddress
  ) public virtual requireSplit {
    if (withdrawETH != 0) {
      distributeETH(
        accounts,
        percentAllocations,
        distributorFee,
        distributorAddress
      );
    }

    for (uint256 i = 0; i < tokens.length; ++i) {
      distributeERC20(
        tokens[i],
        accounts,
        percentAllocations,
        distributorFee,
        distributorAddress
      );
    }

    _withdraw(account, withdrawETH, tokens);
  }

  function transferToSplit(uint256 transferETH, ERC20[] memory tokens)
    public
    virtual
    requireSplit
  {
    if (transferETH != 0) {
      _transferETHToSplit();
    }

    for (uint256 i = 0; i < tokens.length; ++i) {
      _transferERC20ToSplit(tokens[i]);
    }
  }

  function _transferETHToSplit() internal virtual {
    (bool success, ) = splitWallet.call{value: address(this).balance}("");
    require(success, "Could not transfer ETH to split");
  }

  function _transferERC20ToSplit(ERC20 token) internal virtual {
    uint256 balance = token.balanceOf(address(this));
    token.transfer(splitWallet, balance);
  }

  function _withdraw(
    address account,
    uint256 withdrawETH,
    ERC20[] memory tokens
  ) internal virtual {
    ISplitMain(splitMain).withdraw(
      account,
      withdrawETH,
      tokens
    );
  }

  modifier requireSplit() {
    require(splitWallet != address(0), "Split not created yet");
    _;
  }
}

File 24 of 27 : Version.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;

contract Version {
  uint32 private immutable _version;

  /// @notice The version of the contract
  /// @return The version ID of this contract implementation
  function contractVersion() external view returns (uint32) {
      return _version;
  }

  constructor(uint32 version) {
    _version = version;
  }
}

File 25 of 27 : IERC721A.sol
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.2
// Creator: Chiru Labs

pragma solidity ^0.8.4;

/**
 * @dev Interface of ERC721A.
 */
interface IERC721A {
    /**
     * The caller must own the token or be an approved operator.
     */
    error ApprovalCallerNotOwnerNorApproved();

    /**
     * The token does not exist.
     */
    error ApprovalQueryForNonexistentToken();

    /**
     * The caller cannot approve to their own address.
     */
    error ApproveToCaller();

    /**
     * Cannot query the balance for the zero address.
     */
    error BalanceQueryForZeroAddress();

    /**
     * Cannot mint to the zero address.
     */
    error MintToZeroAddress();

    /**
     * The quantity of tokens minted must be more than zero.
     */
    error MintZeroQuantity();

    /**
     * The token does not exist.
     */
    error OwnerQueryForNonexistentToken();

    /**
     * The caller must own the token or be an approved operator.
     */
    error TransferCallerNotOwnerNorApproved();

    /**
     * The token must be owned by `from`.
     */
    error TransferFromIncorrectOwner();

    /**
     * Cannot safely transfer to a contract that does not implement the
     * ERC721Receiver interface.
     */
    error TransferToNonERC721ReceiverImplementer();

    /**
     * Cannot transfer to the zero address.
     */
    error TransferToZeroAddress();

    /**
     * The token does not exist.
     */
    error URIQueryForNonexistentToken();

    /**
     * The `quantity` minted with ERC2309 exceeds the safety limit.
     */
    error MintERC2309QuantityExceedsLimit();

    /**
     * The `extraData` cannot be set on an unintialized ownership slot.
     */
    error OwnershipNotInitializedForExtraData();

    // =============================================================
    //                            STRUCTS
    // =============================================================

    struct TokenOwnership {
        // The address of the owner.
        address addr;
        // Stores the start time of ownership with minimal overhead for tokenomics.
        uint64 startTimestamp;
        // Whether the token has been burned.
        bool burned;
        // Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
        uint24 extraData;
    }

    // =============================================================
    //                         TOKEN COUNTERS
    // =============================================================

    /**
     * @dev Returns the total number of tokens in existence.
     * Burned tokens will reduce the count.
     * To get the total number of tokens minted, please see {_totalMinted}.
     */
    function totalSupply() external view returns (uint256);

    // =============================================================
    //                            IERC165
    // =============================================================

    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);

    // =============================================================
    //                            IERC721
    // =============================================================

    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables
     * (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in `owner`'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`,
     * checking first that contract recipients are aware of the ERC721 protocol
     * to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move
     * this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement
     * {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;

    /**
     * @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom}
     * whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token
     * by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the
     * zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom}
     * for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    // =============================================================
    //                        IERC721Metadata
    // =============================================================

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);

    // =============================================================
    //                           IERC2309
    // =============================================================

    /**
     * @dev Emitted when tokens in `fromTokenId` to `toTokenId`
     * (inclusive) is transferred from `from` to `to`, as defined in the
     * [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
     *
     * See {_mintERC2309} for more details.
     */
    event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}

File 26 of 27 : IOperatorFilterRegistry.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;

interface IOperatorFilterRegistry {
    function isOperatorAllowed(address registrant, address operator) external view returns (bool);
    function register(address registrant) external;
    function registerAndSubscribe(address registrant, address subscription) external;
    function registerAndCopyEntries(address registrant, address registrantToCopy) external;
    function unregister(address addr) external;
    function updateOperator(address registrant, address operator, bool filtered) external;
    function updateOperators(address registrant, address[] calldata operators, bool filtered) external;
    function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;
    function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;
    function subscribe(address registrant, address registrantToSubscribe) external;
    function unsubscribe(address registrant, bool copyExistingEntries) external;
    function subscriptionOf(address addr) external returns (address registrant);
    function subscribers(address registrant) external returns (address[] memory);
    function subscriberAt(address registrant, uint256 index) external returns (address);
    function copyEntriesOf(address registrant, address registrantToCopy) external;
    function isOperatorFiltered(address registrant, address operator) external returns (bool);
    function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);
    function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);
    function filteredOperators(address addr) external returns (address[] memory);
    function filteredCodeHashes(address addr) external returns (bytes32[] memory);
    function filteredOperatorAt(address registrant, uint256 index) external returns (address);
    function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);
    function isRegistered(address addr) external returns (bool);
    function codeHashOf(address addr) external returns (bytes32);
}

File 27 of 27 : ERC20.sol
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event Transfer(address indexed from, address indexed to, uint256 amount);

    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /*//////////////////////////////////////////////////////////////
                            METADATA STORAGE
    //////////////////////////////////////////////////////////////*/

    string public name;

    string public symbol;

    uint8 public immutable decimals;

    /*//////////////////////////////////////////////////////////////
                              ERC20 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 public totalSupply;

    mapping(address => uint256) public balanceOf;

    mapping(address => mapping(address => uint256)) public allowance;

    /*//////////////////////////////////////////////////////////////
                            EIP-2612 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 internal immutable INITIAL_CHAIN_ID;

    bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;

    mapping(address => uint256) public nonces;

    /*//////////////////////////////////////////////////////////////
                               CONSTRUCTOR
    //////////////////////////////////////////////////////////////*/

    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    ) {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;

        INITIAL_CHAIN_ID = block.chainid;
        INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
    }

    /*//////////////////////////////////////////////////////////////
                               ERC20 LOGIC
    //////////////////////////////////////////////////////////////*/

    function approve(address spender, uint256 amount) public virtual returns (bool) {
        allowance[msg.sender][spender] = amount;

        emit Approval(msg.sender, spender, amount);

        return true;
    }

    function transfer(address to, uint256 amount) public virtual returns (bool) {
        balanceOf[msg.sender] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(msg.sender, to, amount);

        return true;
    }

    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual returns (bool) {
        uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.

        if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;

        balanceOf[from] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(from, to, amount);

        return true;
    }

    /*//////////////////////////////////////////////////////////////
                             EIP-2612 LOGIC
    //////////////////////////////////////////////////////////////*/

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");

        // Unchecked because the only math done is incrementing
        // the owner's nonce which cannot realistically overflow.
        unchecked {
            address recoveredAddress = ecrecover(
                keccak256(
                    abi.encodePacked(
                        "\x19\x01",
                        DOMAIN_SEPARATOR(),
                        keccak256(
                            abi.encode(
                                keccak256(
                                    "Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
                                ),
                                owner,
                                spender,
                                value,
                                nonces[owner]++,
                                deadline
                            )
                        )
                    )
                ),
                v,
                r,
                s
            );

            require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");

            allowance[recoveredAddress][spender] = value;
        }

        emit Approval(owner, spender, value);
    }

    function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
        return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
    }

    function computeDomainSeparator() internal view virtual returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
                    keccak256(bytes(name)),
                    keccak256("1"),
                    block.chainid,
                    address(this)
                )
            );
    }

    /*//////////////////////////////////////////////////////////////
                        INTERNAL MINT/BURN LOGIC
    //////////////////////////////////////////////////////////////*/

    function _mint(address to, uint256 amount) internal virtual {
        totalSupply += amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(address(0), to, amount);
    }

    function _burn(address from, uint256 amount) internal virtual {
        balanceOf[from] -= amount;

        // Cannot underflow because a user's balance
        // will never be larger than the total supply.
        unchecked {
            totalSupply -= amount;
        }

        emit Transfer(from, address(0), amount);
    }
}

Settings
{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

Contract ABI

[{"inputs":[],"name":"ApprovalCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"ApprovalQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"ApproveToCaller","type":"error"},{"inputs":[],"name":"BalanceQueryForZeroAddress","type":"error"},{"inputs":[],"name":"FeeTransferFailed","type":"error"},{"inputs":[],"name":"MintERC2309QuantityExceedsLimit","type":"error"},{"inputs":[],"name":"MintToZeroAddress","type":"error"},{"inputs":[],"name":"MintZeroQuantity","type":"error"},{"inputs":[{"internalType":"address","name":"operator","type":"address"}],"name":"OperatorNotAllowed","type":"error"},{"inputs":[],"name":"OwnerQueryForNonexistentToken","type":"error"},{"inputs":[],"name":"OwnershipNotInitializedForExtraData","type":"error"},{"inputs":[],"name":"TransferCallerNotOwnerNorApproved","type":"error"},{"inputs":[],"name":"TransferFromIncorrectOwner","type":"error"},{"inputs":[],"name":"TransferToNonERC721ReceiverImplementer","type":"error"},{"inputs":[],"name":"TransferToZeroAddress","type":"error"},{"inputs":[],"name":"URIQueryForNonexistentToken","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"fromTokenId","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"toTokenId","type":"uint256"},{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"}],"name":"ConsecutiveTransfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"sender","type":"address"},{"indexed":false,"internalType":"uint256","name":"tokenId_","type":"uint256"}],"name":"Minted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MAX_TOKENS","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint32","name":"newCap","type":"uint32"}],"name":"adjustCap","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"baseURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"contractURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"contractVersion","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_splitMain","type":"address"},{"internalType":"address[]","name":"accounts","type":"address[]"},{"internalType":"uint32[]","name":"percentAllocations","type":"uint32[]"},{"internalType":"uint32","name":"distributorFee","type":"uint32"}],"name":"createSplit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"uint256","name":"withdrawETH","type":"uint256"},{"internalType":"contract ERC20[]","name":"tokens","type":"address[]"},{"internalType":"address[]","name":"accounts","type":"address[]"},{"internalType":"uint32[]","name":"percentAllocations","type":"uint32[]"},{"internalType":"uint32","name":"distributorFee","type":"uint32"},{"internalType":"address","name":"distributorAddress","type":"address"}],"name":"distributeAndWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract ERC20","name":"token","type":"address"},{"internalType":"address[]","name":"accounts","type":"address[]"},{"internalType":"uint32[]","name":"percentAllocations","type":"uint32[]"},{"internalType":"uint32","name":"distributorFee","type":"uint32"},{"internalType":"address","name":"distributorAddress","type":"address"}],"name":"distributeERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"accounts","type":"address[]"},{"internalType":"uint32[]","name":"percentAllocations","type":"uint32[]"},{"internalType":"uint32","name":"distributorFee","type":"uint32"},{"internalType":"address","name":"distributorAddress","type":"address"}],"name":"distributeETH","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"edition","outputs":[{"internalType":"bool","name":"hasAdjustableCap","type":"bool"},{"internalType":"bool","name":"isSoulbound","type":"bool"},{"internalType":"uint32","name":"maxTokens","type":"uint32"},{"internalType":"uint32","name":"maxTokenPurchase","type":"uint32"},{"internalType":"uint32","name":"presaleStart","type":"uint32"},{"internalType":"uint32","name":"presaleEnd","type":"uint32"},{"internalType":"uint32","name":"saleStart","type":"uint32"},{"internalType":"uint32","name":"saleEnd","type":"uint32"},{"internalType":"uint16","name":"royaltyBPS","type":"uint16"},{"internalType":"uint96","name":"tokenPrice","type":"uint96"},{"internalType":"address","name":"payoutAddress","type":"address"},{"internalType":"bytes32","name":"presaleMerkleRoot","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"feeManager","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"flipSaleState","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"hasAdjustableCap","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_owner","type":"address"},{"components":[{"internalType":"string","name":"name","type":"string"},{"internalType":"string","name":"symbol","type":"string"},{"internalType":"bool","name":"hasAdjustableCap","type":"bool"},{"internalType":"bool","name":"isSoulbound","type":"bool"},{"internalType":"uint32","name":"maxTokens","type":"uint32"},{"internalType":"uint32","name":"maxTokenPurchase","type":"uint32"},{"internalType":"uint32","name":"presaleStart","type":"uint32"},{"internalType":"uint32","name":"presaleEnd","type":"uint32"},{"internalType":"uint32","name":"saleStart","type":"uint32"},{"internalType":"uint32","name":"saleEnd","type":"uint32"},{"internalType":"uint16","name":"royaltyBPS","type":"uint16"},{"internalType":"uint96","name":"tokenPrice","type":"uint96"},{"internalType":"address","name":"feeManager","type":"address"},{"internalType":"address","name":"payoutAddress","type":"address"},{"internalType":"bytes32","name":"presaleMerkleRoot","type":"bytes32"}],"internalType":"struct EditionConfig","name":"_editionConfig","type":"tuple"},{"components":[{"internalType":"string","name":"contractURI","type":"string"},{"internalType":"string","name":"metadataURI","type":"string"},{"internalType":"bytes","name":"metadataRendererInit","type":"bytes"},{"internalType":"address","name":"parentIP","type":"address"}],"internalType":"struct MetadataConfig","name":"_metadataConfig","type":"tuple"},{"components":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"uint88","name":"minBalance","type":"uint88"},{"internalType":"enum SaleType","name":"saleType","type":"uint8"}],"internalType":"struct TokenGateConfig","name":"_tokenGateConfig","type":"tuple"},{"internalType":"address","name":"_metadataRenderer","type":"address"}],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isSoulbound","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"maxTokenPurchase","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"metadataRenderer","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"numberOfTokens","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address[]","name":"recipients","type":"address[]"}],"name":"mintAirdrop","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"quantity","type":"uint256"}],"name":"mintFee","outputs":[{"internalType":"uint256","name":"fee","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"quantity","type":"uint256"},{"internalType":"uint256","name":"maxQuantity","type":"uint256"},{"internalType":"uint256","name":"pricePerToken","type":"uint256"},{"internalType":"bytes32[]","name":"merkleProof","type":"bytes32[]"}],"name":"mintPresale","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"operatorFilterRegistry","outputs":[{"internalType":"contract IOperatorFilterRegistry","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"parentIP","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"payoutAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"presaleEnd","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"presaleMerkleRoot","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"presaleStart","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"numReserved","type":"uint256"}],"name":"reserveDCNT","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"royaltyBPS","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"uint256","name":"salePrice","type":"uint256"}],"name":"royaltyInfo","outputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"royaltyAmount","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"_data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"saleEnd","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"saleIsActive","outputs":[{"internalType":"bool","name":"_saleIsActive","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"saleIsPaused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"saleStart","outputs":[{"internalType":"uint32","name":"","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"uri","type":"string"}],"name":"setBaseURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"string","name":"uri","type":"string"}],"name":"setContractURI","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_metadataRenderer","type":"address"}],"name":"setMetadataRenderer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_payoutAddress","type":"address"}],"name":"setPayoutAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"_presaleMerkleRoot","type":"bytes32"}],"name":"setPresaleMerkleRoot","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"uint88","name":"minBalance","type":"uint88"},{"internalType":"enum SaleType","name":"saleType","type":"uint8"}],"internalType":"struct TokenGateConfig","name":"_tokenGateConfig","type":"tuple"}],"name":"setTokenGate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"splitMain","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"splitWallet","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenGateConfig","outputs":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"uint88","name":"minBalance","type":"uint88"},{"internalType":"enum SaleType","name":"saleType","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"tokenPrice","outputs":[{"internalType":"uint96","name":"","type":"uint96"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"transferETH","type":"uint256"},{"internalType":"contract ERC20[]","name":"tokens","type":"address[]"}],"name":"transferToSplit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"enable","type":"bool"},{"internalType":"address","name":"operatorFilter","type":"address"}],"name":"updateOperatorFilter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint32","name":"newStart","type":"uint32"},{"internalType":"uint32","name":"newEnd","type":"uint32"}],"name":"updatePresaleStartEnd","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint32","name":"newStart","type":"uint32"},{"internalType":"uint32","name":"newEnd","type":"uint32"}],"name":"updateSaleStartEnd","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.