Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity =0.7.6;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/EnumerableSet.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";

import "./interfaces/ICamelotMaster.sol";
import "./interfaces/INFTPool.sol";
import "./interfaces/IYieldBooster.sol";
import "./interfaces/tokens/IGrailTokenV2.sol";


/*
 * This contract centralizes Camelot's yield incentives distribution.
 * Pools that should receive those incentives are defined here, along with their allocation.
 * All rewards are claimed from the GRAILToken contract.
 */
contract CamelotMaster is Ownable, ICamelotMaster {
  using SafeERC20 for IGrailTokenV2;
  using SafeMath for uint256;
  using EnumerableSet for EnumerableSet.AddressSet;

  // Info of each NFT pool
  struct PoolInfo {
    uint256 allocPoint; // How many allocation points assigned to this NFT pool
    uint256 lastRewardTime; // Last time that distribution to this NFT pool occurs
    uint256 reserve; // Pending rewards to distribute to the NFT pool
  }

  IGrailTokenV2 private immutable _grailToken; // Address of the GRAIL token contract
  IYieldBooster private _yieldBooster; // Contract address handling yield boosts

  mapping(address => PoolInfo) private _poolInfo; // Pools' information
  EnumerableSet.AddressSet private _pools; // All existing pool addresses
  EnumerableSet.AddressSet private _activePools; // Only contains pool addresses w/ allocPoints > 0

  uint256 public totalAllocPoint; // Total allocation points. Must be the sum of all allocation points in all pools
  uint256 public immutable startTime; // The time at which farming starts

  bool public override emergencyUnlock; // Used by pools to release all their locks at once in case of emergency

  constructor(
    IGrailTokenV2 grailToken_,
    uint256 startTime_
  ) {
    require(address(grailToken_) != address(0), "CamelotMaster: grailToken cannot be set to zero address");
    require(_currentBlockTimestamp() < startTime_ && startTime_ >= grailToken_.lastEmissionTime(), "CamelotMaster: invalid startTime");
    _grailToken = grailToken_;
    startTime = startTime_; // Must be set with the same time as GrailToken emission start
  }


  /********************************************/
  /****************** EVENTS ******************/
  /********************************************/

  event ClaimRewards(address indexed poolAddress, uint256 amount);
  event PoolAdded(address indexed poolAddress, uint256 allocPoint);
  event PoolSet(address indexed poolAddress, uint256 allocPoint);
  event SetYieldBooster(address previousYieldBooster, address newYieldBooster);
  event PoolUpdated(address indexed poolAddress, uint256 reserve, uint256 lastRewardTime);
  event SetEmergencyUnlock(bool emergencyUnlock);


  /***********************************************/
  /****************** MODIFIERS ******************/
  /***********************************************/

  /*
   * @dev Check if a pool exists
   */
  modifier validatePool(address poolAddress) {
    require(_pools.contains(poolAddress), "validatePool: pool does not exist");
    _;
  }


  /**************************************************/
  /****************** PUBLIC VIEWS ******************/
  /**************************************************/

  /*
   * @dev Returns GrailToken address
   */
  function grailToken() external view override returns (address) {
    return address(_grailToken);
  }

  /*
   * @dev Returns GrailToken's emission rate (allocated to this contract)
   */
  function emissionRate() public view returns (uint256) {
    return _grailToken.masterEmissionRate();
  }

  /**
   * @dev Returns current owner's address
   */
  function owner() public view virtual override(ICamelotMaster, Ownable) returns (address) {
    return Ownable.owner();
  }

  /**
   * @dev Returns YieldBooster's address
   */
  function yieldBooster() external view override returns (address) {
    return address(_yieldBooster);
  }

  /**
   * @dev Returns the number of available pools
   */
  function poolsLength() external view returns (uint256) {
    return _pools.length();
  }

  /**
   * @dev Returns a pool from its "index"
   */
  function getPoolAddressByIndex(uint256 index) external view returns (address) {
    if (index >= _pools.length()) return address(0);
    return _pools.at(index);
  }

  /**
   * @dev Returns the number of active pools
   */
  function activePoolsLength() external view returns (uint256) {
    return _activePools.length();
  }

  /**
   * @dev Returns an active pool from its "index"
   */
  function getActivePoolAddressByIndex(uint256 index) external view returns (address) {
    if (index >= _activePools.length()) return address(0);
    return _activePools.at(index);
  }

  /**
   * @dev Returns data of a given pool
   */
  function getPoolInfo(address poolAddress_) external view override returns (
    address poolAddress, uint256 allocPoint, uint256 lastRewardTime, uint256 reserve, uint256 poolEmissionRate
  ) {
    PoolInfo memory pool = _poolInfo[poolAddress_];

    poolAddress = poolAddress_;
    allocPoint = pool.allocPoint;
    lastRewardTime = pool.lastRewardTime;
    reserve = pool.reserve;

    if (totalAllocPoint == 0) {
      poolEmissionRate = 0;
    } else {
      poolEmissionRate = emissionRate().mul(allocPoint).div(totalAllocPoint);
    }
  }


  /*******************************************************/
  /****************** OWNABLE FUNCTIONS ******************/
  /*******************************************************/

  /**
   * @dev Set YieldBooster contract's address
   *
   * Must only be called by the owner
   */
  function setYieldBooster(IYieldBooster yieldBooster_) external onlyOwner {
    require(address(yieldBooster_) != address(0), "setYieldBooster: cannot be set to zero address");
    emit SetYieldBooster(address(_yieldBooster), address(yieldBooster_));
    _yieldBooster = yieldBooster_;
  }

  /**
   * @dev Set emergency unlock status for all pools
   *
   * Must only be called by the owner
   */
  function setEmergencyUnlock(bool emergencyUnlock_) external onlyOwner {
    emergencyUnlock = emergencyUnlock_;
    emit SetEmergencyUnlock(emergencyUnlock);
  }

  /**
   * @dev Adds a new pool
   * param withUpdate should be set to true every time it's possible
   *
   * Must only be called by the owner
   */
  function add(INFTPool nftPool, uint256 allocPoint, bool withUpdate) external onlyOwner {
    address poolAddress = address(nftPool);
    require(!_pools.contains(poolAddress), "add: pool already exists");
    uint256 currentBlockTimestamp = _currentBlockTimestamp();

    if (allocPoint > 0) {
      if (withUpdate) {
        // Update all pools if new pool allocPoint > 0
        _massUpdatePools();
      }
      _activePools.add(poolAddress);
    }

    // update lastRewardTime if startTime has already been passed
    uint256 lastRewardTime = currentBlockTimestamp > startTime ? currentBlockTimestamp : startTime;

    // update totalAllocPoint with the new pool's points
    totalAllocPoint = totalAllocPoint.add(allocPoint);

    // add new pool
    _poolInfo[poolAddress] = PoolInfo({
    allocPoint : allocPoint,
    lastRewardTime : lastRewardTime,
    reserve : 0
    });
    _pools.add(poolAddress);

    emit PoolAdded(poolAddress, allocPoint);
  }

  /**
   * @dev Updates configuration on existing pool
   * param withUpdate should be set to true every time it's possible
   *
   * Must only be called by the owner
   */
  function set(address poolAddress, uint256 allocPoint, bool withUpdate) external validatePool(poolAddress) onlyOwner {
    PoolInfo storage pool = _poolInfo[poolAddress];
    uint256 prevAllocPoint = pool.allocPoint;

    if (withUpdate) {
      _massUpdatePools();
    }
    _updatePool(poolAddress);

    // update (pool's and total) allocPoints
    pool.allocPoint = allocPoint;
    totalAllocPoint = totalAllocPoint.sub(prevAllocPoint).add(allocPoint);

    // if request is activating the pool
    if (prevAllocPoint == 0 && allocPoint > 0) {
      _activePools.add(poolAddress);
    }
    // if request is deactivating the pool
    else if (prevAllocPoint > 0 && allocPoint == 0) {
      _activePools.remove(poolAddress);
    }

    emit PoolSet(poolAddress, allocPoint);
  }


  /****************************************************************/
  /****************** EXTERNAL PUBLIC FUNCTIONS  ******************/
  /****************************************************************/

  /**
   * @dev Updates rewards states of the given pool to be up-to-date
   */
  function updatePool(address nftPool) external validatePool(nftPool) {
    _updatePool(nftPool);
  }

  /**
   * @dev Updates rewards states for all pools
   *
   * Be careful of gas spending
   */
  function massUpdatePools() external {
    _massUpdatePools();
  }

  /**
   * @dev Transfer to a pool its pending rewards in reserve, can only be called by the NFT pool contract itself
   */
  function claimRewards() external override returns (uint256 rewardsAmount) {
    // check if caller is a listed pool
    if (!_pools.contains(msg.sender)) {
      return 0;
    }

    _updatePool(msg.sender);

    // updates caller's reserve
    PoolInfo storage pool = _poolInfo[msg.sender];
    uint256 reserve = pool.reserve;
    if (reserve == 0) {
      return 0;
    }
    pool.reserve = 0;

    emit ClaimRewards(msg.sender, reserve);
    return _safeRewardsTransfer(msg.sender, reserve);
  }


  /********************************************************/
  /****************** INTERNAL FUNCTIONS ******************/
  /********************************************************/

  /**
   * @dev Safe token transfer function, in case rounding error causes pool to not have enough tokens
   */
  function _safeRewardsTransfer(address to, uint256 amount) internal returns (uint256 effectiveAmount) {
    uint256 grailBalance = _grailToken.balanceOf(address(this));

    if (amount > grailBalance) {
      amount = grailBalance;
    }

    _grailToken.safeTransfer(to, amount);
    return amount;
  }

  /**
   * @dev Updates rewards states of the given pool to be up-to-date
   *
   * Pool should be validated prior to calling this
   */
  function _updatePool(address poolAddress) internal {
    PoolInfo storage pool = _poolInfo[poolAddress];

    uint256 currentBlockTimestamp = _currentBlockTimestamp();

    uint256 lastRewardTime = pool.lastRewardTime; // gas saving
    uint256 allocPoint = pool.allocPoint; // gas saving

    if (currentBlockTimestamp <= lastRewardTime) {
      return;
    }

    // do not allocate rewards if pool is not active
    if (allocPoint > 0 && INFTPool(poolAddress).hasDeposits()) {
      // calculate how much GRAIL rewards are expected to be received for this pool
      uint256 rewards = currentBlockTimestamp.sub(lastRewardTime) // nbSeconds
        .mul(emissionRate()).mul(allocPoint).div(totalAllocPoint);

      // claim expected rewards from the token
      // use returns effective minted amount instead of expected amount
      (rewards) = _grailToken.claimMasterRewards(rewards);

      // updates pool data
      pool.reserve = pool.reserve.add(rewards);
    }

    pool.lastRewardTime = currentBlockTimestamp;

    emit PoolUpdated(poolAddress, pool.reserve, currentBlockTimestamp);
  }

  /**
   * @dev Updates rewards states for all pools
   *
   * Be careful of gas spending
   */
  function _massUpdatePools() internal {
    uint256 length = _activePools.length();
    for (uint256 index = 0; index < length; ++index) {
      _updatePool(_activePools.at(index));
    }
  }

  /**
   * @dev Utility function to get the current block timestamp
   */
  function _currentBlockTimestamp() internal view virtual returns (uint256) {
    /* solhint-disable not-rely-on-time */
    return block.timestamp;
  }
}

// SPDX-License-Identifier: MIT
pragma solidity =0.7.6;

import "@openzeppelin/contracts/token/ERC20/IERC20.sol";

interface IGrailTokenV2 is IERC20{
  function lastEmissionTime() external view returns (uint256);

  function claimMasterRewards(uint256 amount) external returns (uint256 effectiveAmount);
  function masterEmissionRate() external view returns (uint256);
  function burn(uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity =0.7.6;

interface IYieldBooster {
  function deallocateAllFromPool(address userAddress, uint256 tokenId) external;
  function getMultiplier(address poolAddress, uint256 maxBoostMultiplier, uint256 amount, uint256 totalPoolSupply, uint256 allocatedAmount) external view returns (uint256);
}

// SPDX-License-Identifier: MIT
pragma solidity =0.7.6;

import "@openzeppelin/contracts/token/ERC721/IERC721.sol";

interface INFTPool is IERC721 {
  function exists(uint256 tokenId) external view returns (bool);
  function hasDeposits() external view returns (bool);
  function getPoolInfo() external view returns (
    address lpToken, address grailToken, address sbtToken, uint256 lastRewardTime, uint256 accRewardsPerShare,
    uint256 lpSupply, uint256 lpSupplyWithMultiplier, uint256 allocPoint
  );
  function getStakingPosition(uint256 tokenId) external view returns (
    uint256 amount, uint256 amountWithMultiplier, uint256 startLockTime,
    uint256 lockDuration, uint256 lockMultiplier, uint256 rewardDebt,
    uint256 boostPoints, uint256 totalMultiplier
  );

  function boost(uint256 userAddress, uint256 amount) external;
  function unboost(uint256 userAddress, uint256 amount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity =0.7.6;

interface ICamelotMaster {

  function grailToken() external view returns (address);
  function yieldBooster() external view returns (address);
  function owner() external view returns (address);
  function emergencyUnlock() external view returns (bool);

  function getPoolInfo(address _poolAddress) external view returns (address poolAddress, uint256 allocPoint, uint256 lastRewardTime, uint256 reserve, uint256 poolEmissionRate);

  function claimRewards() external returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

import "../../introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
      * @dev Safely transfers `tokenId` token from `from` to `to`.
      *
      * Requirements:
      *
      * - `from` cannot be the zero address.
      * - `to` cannot be the zero address.
      * - `tokenId` token must exist and be owned by `from`.
      * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
      * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
      *
      * Emits a {Transfer} event.
      */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.7.0;

import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

{
  "remappings": [],
  "optimizer": {
    "enabled": true,
    "runs": 50000
  },
  "evmVersion": "istanbul",
  "libraries": {},
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IGrailTokenV2","name":"grailToken_","type":"address"},{"internalType":"uint256","name":"startTime_","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"poolAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ClaimRewards","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"poolAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"allocPoint","type":"uint256"}],"name":"PoolAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"poolAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"allocPoint","type":"uint256"}],"name":"PoolSet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"poolAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"reserve","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"lastRewardTime","type":"uint256"}],"name":"PoolUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"emergencyUnlock","type":"bool"}],"name":"SetEmergencyUnlock","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"previousYieldBooster","type":"address"},{"indexed":false,"internalType":"address","name":"newYieldBooster","type":"address"}],"name":"SetYieldBooster","type":"event"},{"inputs":[],"name":"activePoolsLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract INFTPool","name":"nftPool","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"bool","name":"withUpdate","type":"bool"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"claimRewards","outputs":[{"internalType":"uint256","name":"rewardsAmount","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"emergencyUnlock","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"emissionRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getActivePoolAddressByIndex","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getPoolAddressByIndex","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"poolAddress_","type":"address"}],"name":"getPoolInfo","outputs":[{"internalType":"address","name":"poolAddress","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardTime","type":"uint256"},{"internalType":"uint256","name":"reserve","type":"uint256"},{"internalType":"uint256","name":"poolEmissionRate","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"grailToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolsLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"poolAddress","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"bool","name":"withUpdate","type":"bool"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bool","name":"emergencyUnlock_","type":"bool"}],"name":"setEmergencyUnlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IYieldBooster","name":"yieldBooster_","type":"address"}],"name":"setYieldBooster","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"nftPool","type":"address"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"yieldBooster","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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

0000000000000000000000003d9907f9a368ad0a51be60f7da3b97cf940982d8000000000000000000000000000000000000000000000000000000006390c690

-----Decoded View---------------
Arg [0] : grailToken_ (address): 0x3d9907F9a368ad0a51Be60f7Da3b97cf940982D8
Arg [1] : startTime_ (uint256): 1670432400

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 0000000000000000000000003d9907f9a368ad0a51be60f7da3b97cf940982d8
Arg [1] : 000000000000000000000000000000000000000000000000000000006390c690