Contract 0x505ac728645d2ef84380961f72baea500b3efa3f 12

// SPDX-License-Identifier: MIT
pragma solidity =0.8.14;

/*

░██╗░░░░░░░██╗░█████╗░░█████╗░░░░░░░███████╗██╗
░██║░░██╗░░██║██╔══██╗██╔══██╗░░░░░░██╔════╝██║
░╚██╗████╗██╔╝██║░░██║██║░░██║█████╗█████╗░░██║
░░████╔═████║░██║░░██║██║░░██║╚════╝██╔══╝░░██║
░░╚██╔╝░╚██╔╝░╚█████╔╝╚█████╔╝░░░░░░██║░░░░░██║
░░░╚═╝░░░╚═╝░░░╚════╝░░╚════╝░░░░░░░╚═╝░░░░░╚═╝

*
* MIT License
* ===========
*
* Copyright (c) 2020 WooTrade
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

import "./interfaces/IWooRebateManager.sol";
import "./interfaces/IWooAccessManager.sol";
import "./interfaces/IWooRouterV2.sol";

import "./libraries/TransferHelper.sol";

import {Ownable} from "@openzeppelin/contracts/access/Ownable.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";

contract WooRebateManager is Ownable, ReentrancyGuard, IWooRebateManager {
    using EnumerableSet for EnumerableSet.AddressSet;

    // Note: this is the percent rate of the total swap fee (not the swap volume)
    // decimal: 18; 1e16 = 1%, 1e15 = 0.1%, 1e14 = 0.01%
    //
    // e.g. suppose:
    //   rebateRate = 2e17 (20%), so the rebate amount is total_swap_fee * 20%.
    mapping(address => uint256) public override rebateRate;

    EnumerableSet.AddressSet private rebateAddressSet;

    // pending rebate amount in quote token
    mapping(address => uint256) public pendingRebate;

    IWooRouterV2 public wooRouter;

    address public immutable override quoteToken; // e.g. USDC or USDT
    address public rewardToken; // Any Token

    IWooAccessManager public accessManager;

    /* ----- Modifiers ----- */

    modifier onlyAdmin() {
        require(msg.sender == owner() || accessManager.isRebateAdmin(msg.sender), "WooRebateManager: !admin");
        _;
    }

    constructor(
        address _quoteToken,
        address _rewardToken,
        address _accessManager
    ) {
        quoteToken = _quoteToken;
        rewardToken = _rewardToken;
        accessManager = IWooAccessManager(_accessManager);
    }

    function pendingRebateInQuote(address brokerAddr) external view override returns (uint256) {
        require(brokerAddr != address(0), "WooRebateManager: !brokerAddr");
        return pendingRebate[brokerAddr];
    }

    function pendingRebateInReward(address brokerAddr) external view override returns (uint256) {
        require(brokerAddr != address(0), "WooRebateManager: !brokerAddr");
        return
            rewardToken != quoteToken
                ? wooRouter.querySwap(quoteToken, rewardToken, pendingRebate[brokerAddr])
                : pendingRebate[brokerAddr];
    }

    function claimRebate() external override nonReentrant {
        if (pendingRebate[msg.sender] == 0) {
            return;
        }

        uint256 quoteAmount = pendingRebate[msg.sender];

        // Note: set the pending rebate early to make external interactions safe.
        pendingRebate[msg.sender] = 0;

        uint256 rewardAmount;
        if (rewardToken == quoteToken) {
            rewardAmount = quoteAmount;
            TransferHelper.safeTransfer(rewardToken, msg.sender, rewardAmount);
        } else {
            TransferHelper.safeApprove(quoteToken, address(wooRouter), quoteAmount);
            rewardAmount = wooRouter.swap(quoteToken, rewardToken, quoteAmount, 0, payable(msg.sender), address(0));
        }

        emit ClaimReward(msg.sender, rewardAmount);
    }

    function allRebateAddresses() external view returns (address[] memory) {
        address[] memory rebateAddresses = new address[](rebateAddressSet.length());
        unchecked {
            for (uint256 i = 0; i < rebateAddressSet.length(); ++i) {
                rebateAddresses[i] = rebateAddressSet.at(i);
            }
        }
        return rebateAddresses;
    }

    function allRebateAddressesLength() external view returns (uint256) {
        return rebateAddressSet.length();
    }

    /* ----- Admin Functions ----- */

    function addRebate(address brokerAddr, uint256 amountInUSDT) external override nonReentrant onlyAdmin {
        if (brokerAddr == address(0)) {
            return;
        }
        pendingRebate[brokerAddr] += amountInUSDT;
    }

    function setRebateRate(address brokerAddr, uint256 rate) external override onlyAdmin {
        require(brokerAddr != address(0), "WooRebateManager: brokerAddr_ZERO_ADDR");
        require(rate <= 1e18, "WooRebateManager: INVALID_USER_REWARD_RATE"); // rate <= 100%
        rebateRate[brokerAddr] = rate;
        if (rate == 0) {
            rebateAddressSet.remove(brokerAddr);
        } else {
            rebateAddressSet.add(brokerAddr);
        }
        emit RebateRateUpdated(brokerAddr, rate);
    }

    function setWooRouter(address _wooRouter) external onlyAdmin {
        wooRouter = IWooRouterV2(_wooRouter);
        require(wooRouter.wooPool().quoteToken() == quoteToken, "WooRebateManager: !wooRouter_quoteToken");
    }

    function setAccessManager(address _accessManager) external onlyOwner {
        require(_accessManager != address(0), "WooRebateManager: !_accessManager");
        accessManager = IWooAccessManager(_accessManager);
    }

    function setRewardToken(address _rewardToken) external onlyAdmin {
        require(_rewardToken != address(0), "WooRebateManager: !_rewardToken");
        rewardToken = _rewardToken;
    }

    function inCaseTokenGotStuck(address stuckToken) external onlyOwner {
        if (stuckToken == 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE) {
            TransferHelper.safeTransferETH(msg.sender, address(this).balance);
        } else {
            uint256 amount = IERC20(stuckToken).balanceOf(address(this));
            TransferHelper.safeTransfer(stuckToken, msg.sender, amount);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity =0.8.14;

/*

░██╗░░░░░░░██╗░█████╗░░█████╗░░░░░░░███████╗██╗
░██║░░██╗░░██║██╔══██╗██╔══██╗░░░░░░██╔════╝██║
░╚██╗████╗██╔╝██║░░██║██║░░██║█████╗█████╗░░██║
░░████╔═████║░██║░░██║██║░░██║╚════╝██╔══╝░░██║
░░╚██╔╝░╚██╔╝░╚█████╔╝╚█████╔╝░░░░░░██║░░░░░██║
░░░╚═╝░░░╚═╝░░░╚════╝░░╚════╝░░░░░░░╚═╝░░░░░╚═╝

*
* MIT License
* ===========
*
* Copyright (c) 2020 WooTrade
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

/// @title Rebate manager interface for WooFi Swap.
/// @notice this is for swap rebate or potential incentive program

interface IWooRebateManager {
    event Withdraw(address indexed token, address indexed to, uint256 amount);
    event RebateRateUpdated(address indexed brokerAddr, uint256 rate);
    event ClaimReward(address indexed brokerAddr, uint256 amount);

    /// @dev Gets the rebate rate for the given broker.
    /// Note: decimal: 18;  1e16 = 1%, 1e15 = 0.1%, 1e14 = 0.01%
    /// @param brokerAddr the address for rebate
    /// @return The rebate rate (decimal: 18; 1e16 = 1%, 1e15 = 0.1%, 1e14 = 0.01%)
    function rebateRate(address brokerAddr) external view returns (uint256);

    /// @dev set the rebate rate
    /// @param brokerAddr the rebate address
    /// @param rate the rebate rate
    function setRebateRate(address brokerAddr, uint256 rate) external;

    /// @dev adds the pending reward for the given user.
    /// @param brokerAddr the address for rebate
    /// @param amountInUSD the pending reward amount
    function addRebate(address brokerAddr, uint256 amountInUSD) external;

    /// @dev Pending amount in reward token (e.g. $woo).
    /// @param brokerAddr the address for rebate
    function pendingRebateInReward(address brokerAddr) external view returns (uint256);

    /// @dev Pending amount in quote token (e.g. usdc).
    /// @param brokerAddr the address for rebate
    function pendingRebateInQuote(address brokerAddr) external view returns (uint256);

    /// @dev Claims the reward ($woo token will be distributed)
    function claimRebate() external;

    /// @dev get the quote token address
    /// @return address of quote token
    function quoteToken() external view returns (address);
}

// SPDX-License-Identifier: MIT
pragma solidity =0.8.14;

/*

░██╗░░░░░░░██╗░█████╗░░█████╗░░░░░░░███████╗██╗
░██║░░██╗░░██║██╔══██╗██╔══██╗░░░░░░██╔════╝██║
░╚██╗████╗██╔╝██║░░██║██║░░██║█████╗█████╗░░██║
░░████╔═████║░██║░░██║██║░░██║╚════╝██╔══╝░░██║
░░╚██╔╝░╚██╔╝░╚█████╔╝╚█████╔╝░░░░░░██║░░░░░██║
░░░╚═╝░░░╚═╝░░░╚════╝░░╚════╝░░░░░░░╚═╝░░░░░╚═╝

*
* MIT License
* ===========
*
* Copyright (c) 2020 WooTrade
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

/// @title Reward manager interface for WooFi Swap.
/// @notice this is for swap rebate or potential incentive program
interface IWooAccessManager {
    /* ----- Events ----- */

    event FeeAdminUpdated(address indexed feeAdmin, bool flag);

    event VaultAdminUpdated(address indexed vaultAdmin, bool flag);

    event RebateAdminUpdated(address indexed rebateAdmin, bool flag);

    event ZeroFeeVaultUpdated(address indexed vault, bool flag);

    /* ----- External Functions ----- */

    function isFeeAdmin(address feeAdmin) external returns (bool);

    function isVaultAdmin(address vaultAdmin) external returns (bool);

    function isRebateAdmin(address rebateAdmin) external returns (bool);

    function isZeroFeeVault(address vault) external returns (bool);

    /* ----- Admin Functions ----- */

    /// @notice Sets feeAdmin
    function setFeeAdmin(address feeAdmin, bool flag) external;

    /// @notice Sets vaultAdmin
    function setVaultAdmin(address vaultAdmin, bool flag) external;

    /// @notice Sets rebateAdmin
    function setRebateAdmin(address rebateAdmin, bool flag) external;

    /// @notice Sets zeroFeeVault
    function setZeroFeeVault(address vault, bool flag) external;
}

// SPDX-License-Identifier: MIT
pragma solidity =0.8.14;

/*

░██╗░░░░░░░██╗░█████╗░░█████╗░░░░░░░███████╗██╗
░██║░░██╗░░██║██╔══██╗██╔══██╗░░░░░░██╔════╝██║
░╚██╗████╗██╔╝██║░░██║██║░░██║█████╗█████╗░░██║
░░████╔═████║░██║░░██║██║░░██║╚════╝██╔══╝░░██║
░░╚██╔╝░╚██╔╝░╚█████╔╝╚█████╔╝░░░░░░██║░░░░░██║
░░░╚═╝░░░╚═╝░░░╚════╝░░╚════╝░░░░░░░╚═╝░░░░░╚═╝

*
* MIT License
* ===========
*
* Copyright (c) 2020 WooTrade
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

import "../interfaces/IWooPPV2.sol";

/// @title Woo router interface (version 2)
/// @notice functions to interface with WooFi swap
interface IWooRouterV2 {
    /* ----- Type declarations ----- */

    enum SwapType {
        WooSwap,
        DodoSwap
    }

    /* ----- Events ----- */

    event WooRouterSwap(
        SwapType swapType,
        address indexed fromToken,
        address indexed toToken,
        uint256 fromAmount,
        uint256 toAmount,
        address from,
        address indexed to,
        address rebateTo
    );

    event WooPoolChanged(address newPool);

    /* ----- Router properties ----- */

    function WETH() external view returns (address);

    function wooPool() external view returns (IWooPPV2);

    /* ----- Main query & swap APIs ----- */

    /// @notice query the amount to swap fromToken -> toToken
    /// @param fromToken the from token
    /// @param toToken the to token
    /// @param fromAmount the amount of fromToken to swap
    /// @return toAmount the predicted amount to receive
    function querySwap(
        address fromToken,
        address toToken,
        uint256 fromAmount
    ) external view returns (uint256 toAmount);

    /// @notice query the amount to swap fromToken -> toToken,
    ///     WITHOUT checking the reserve balance; so it
    ///     always returns the quoted amount (for reference).
    /// @param fromToken the from token
    /// @param toToken the to token
    /// @param fromAmount the amount of fromToken to swap
    /// @return toAmount the predicted amount to receive
    function tryQuerySwap(
        address fromToken,
        address toToken,
        uint256 fromAmount
    ) external view returns (uint256 toAmount);

    /// @notice Swap `fromToken` to `toToken`.
    /// @param fromToken the from token
    /// @param toToken the to token
    /// @param fromAmount the amount of `fromToken` to swap
    /// @param minToAmount the minimum amount of `toToken` to receive
    /// @param to the destination address
    /// @param rebateTo the rebate address (optional, can be 0)
    /// @return realToAmount the amount of toToken to receive
    function swap(
        address fromToken,
        address toToken,
        uint256 fromAmount,
        uint256 minToAmount,
        address payable to,
        address rebateTo
    ) external payable returns (uint256 realToAmount);

    /* ----- 3rd party DEX swap ----- */

    /// @notice swap fromToken -> toToken via an external 3rd swap
    /// @param approveTarget the contract address for token transfer approval
    /// @param swapTarget the contract address for swap
    /// @param fromToken the from token
    /// @param toToken the to token
    /// @param fromAmount the amount of fromToken to swap
    /// @param minToAmount the min amount of swapped toToken
    /// @param to the destination address
    /// @param data call data for external call
    function externalSwap(
        address approveTarget,
        address swapTarget,
        address fromToken,
        address toToken,
        uint256 fromAmount,
        uint256 minToAmount,
        address payable to,
        bytes calldata data
    ) external payable returns (uint256 realToAmount);
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.8.0;

// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('approve(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::safeApprove: approve failed'
        );
    }

    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transfer(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::safeTransfer: transfer failed'
        );
    }

    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::transferFrom: transferFrom failed'
        );
    }

    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, 'TransferHelper::safeTransferETH: ETH transfer failed');
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/structs/EnumerableSet.sol)

pragma solidity ^0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 *
 * [WARNING]
 * ====
 *  Trying to delete such a structure from storage will likely result in data corruption, rendering the structure unusable.
 *  See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
 *
 *  In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an array of EnumerableSet.
 * ====
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;
        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping(bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) {
            // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            if (lastIndex != toDeleteIndex) {
                bytes32 lastValue = set._values[lastIndex];

                // Move the last value to the index where the value to delete is
                set._values[toDeleteIndex] = lastValue;
                // Update the index for the moved value
                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
            }

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        return set._values[index];
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function _values(Set storage set) private view returns (bytes32[] memory) {
        return set._values;
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
        return _values(set._inner);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(AddressSet storage set) internal view returns (address[] memory) {
        bytes32[] memory store = _values(set._inner);
        address[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }

    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

    /**
     * @dev Returns the value stored at position `index` in the set. O(1).
     *
     * Note that there are no guarantees on the ordering of values inside the
     * array, and it may change when more values are added or removed.
     *
     * Requirements:
     *
     * - `index` must be strictly less than {length}.
     */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }

    /**
     * @dev Return the entire set in an array
     *
     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
     * this function has an unbounded cost, and using it as part of a state-changing function may render the function
     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
     */
    function values(UintSet storage set) internal view returns (uint256[] memory) {
        bytes32[] memory store = _values(set._inner);
        uint256[] memory result;

        /// @solidity memory-safe-assembly
        assembly {
            result := store
        }

        return result;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity =0.8.14;

/*

░██╗░░░░░░░██╗░█████╗░░█████╗░░░░░░░███████╗██╗
░██║░░██╗░░██║██╔══██╗██╔══██╗░░░░░░██╔════╝██║
░╚██╗████╗██╔╝██║░░██║██║░░██║█████╗█████╗░░██║
░░████╔═████║░██║░░██║██║░░██║╚════╝██╔══╝░░██║
░░╚██╔╝░╚██╔╝░╚█████╔╝╚█████╔╝░░░░░░██║░░░░░██║
░░░╚═╝░░░╚═╝░░░╚════╝░░╚════╝░░░░░░░╚═╝░░░░░╚═╝

*
* MIT License
* ===========
*
* Copyright (c) 2020 WooTrade
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

/// @title Woo private pool for swap.
/// @notice Use this contract to directly interfact with woo's synthetic proactive
///         marketing making pool.
/// @author woo.network
interface IWooPPV2 {
    /* ----- Events ----- */

    event Deposit(address indexed token, address indexed sender, uint256 amount);
    event Withdraw(address indexed token, address indexed receiver, uint256 amount);
    event Migrate(address indexed token, address indexed receiver, uint256 amount);
    event AdminUpdated(address indexed addr, bool flag);
    event FeeAddrUpdated(address indexed newFeeAddr);
    event WooracleUpdated(address indexed newWooracle);
    event WooSwap(
        address indexed fromToken,
        address indexed toToken,
        uint256 fromAmount,
        uint256 toAmount,
        address from,
        address indexed to,
        address rebateTo,
        uint256 swapVol,
        uint256 swapFee
    );

    /* ----- External Functions ----- */

    /// @notice The quote token address (immutable).
    /// @return address of quote token
    function quoteToken() external view returns (address);

    /// @notice Gets the pool size of the specified token (swap liquidity).
    /// @param token the token address
    /// @return the pool size
    function poolSize(address token) external view returns (uint256);

    /// @notice Query the amount to swap `fromToken` to `toToken`, without checking the pool reserve balance.
    /// @param fromToken the from token
    /// @param toToken the to token
    /// @param fromAmount the amount of `fromToken` to swap
    /// @return toAmount the swapped amount of `toToken`
    function tryQuery(
        address fromToken,
        address toToken,
        uint256 fromAmount
    ) external view returns (uint256 toAmount);

    /// @notice Query the amount to swap `fromToken` to `toToken`, with checking the pool reserve balance.
    /// @dev tx reverts when 'toToken' balance is insufficient.
    /// @param fromToken the from token
    /// @param toToken the to token
    /// @param fromAmount the amount of `fromToken` to swap
    /// @return toAmount the swapped amount of `toToken`
    function query(
        address fromToken,
        address toToken,
        uint256 fromAmount
    ) external view returns (uint256 toAmount);

    /// @notice Swap `fromToken` to `toToken`.
    /// @param fromToken the from token
    /// @param toToken the to token
    /// @param fromAmount the amount of `fromToken` to swap
    /// @param minToAmount the minimum amount of `toToken` to receive
    /// @param to the destination address
    /// @param rebateTo the rebate address (optional, can be address ZERO)
    /// @return realToAmount the amount of toToken to receive
    function swap(
        address fromToken,
        address toToken,
        uint256 fromAmount,
        uint256 minToAmount,
        address to,
        address rebateTo
    ) external returns (uint256 realToAmount);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

{
  "optimizer": {
    "enabled": true,
    "runs": 888888
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

[{"inputs":[{"internalType":"address","name":"_quoteToken","type":"address"},{"internalType":"address","name":"_rewardToken","type":"address"},{"internalType":"address","name":"_accessManager","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"brokerAddr","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ClaimReward","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"brokerAddr","type":"address"},{"indexed":false,"internalType":"uint256","name":"rate","type":"uint256"}],"name":"RebateRateUpdated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"token","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[],"name":"accessManager","outputs":[{"internalType":"contract IWooAccessManager","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"brokerAddr","type":"address"},{"internalType":"uint256","name":"amountInUSDT","type":"uint256"}],"name":"addRebate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"allRebateAddresses","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"allRebateAddressesLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimRebate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"stuckToken","type":"address"}],"name":"inCaseTokenGotStuck","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"pendingRebate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"brokerAddr","type":"address"}],"name":"pendingRebateInQuote","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"brokerAddr","type":"address"}],"name":"pendingRebateInReward","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"quoteToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"rebateRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_accessManager","type":"address"}],"name":"setAccessManager","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"brokerAddr","type":"address"},{"internalType":"uint256","name":"rate","type":"uint256"}],"name":"setRebateRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_rewardToken","type":"address"}],"name":"setRewardToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_wooRouter","type":"address"}],"name":"setWooRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"wooRouter","outputs":[{"internalType":"contract IWooRouterV2","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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

000000000000000000000000ff970a61a04b1ca14834a43f5de4533ebddb5cc8000000000000000000000000ff970a61a04b1ca14834a43f5de4533ebddb5cc80000000000000000000000008cd11c6f710e8bf65b5078e92dc8529cff14b108

-----Decoded View---------------
Arg [0] : _quoteToken (address): 0xFF970A61A04b1cA14834A43f5dE4533eBDDB5CC8
Arg [1] : _rewardToken (address): 0xFF970A61A04b1cA14834A43f5dE4533eBDDB5CC8
Arg [2] : _accessManager (address): 0x8cd11C6F710E8Bf65B5078e92Dc8529cFF14b108

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 000000000000000000000000ff970a61a04b1ca14834a43f5de4533ebddb5cc8
Arg [1] : 000000000000000000000000ff970a61a04b1ca14834a43f5de4533ebddb5cc8
Arg [2] : 0000000000000000000000008cd11c6f710e8bf65b5078e92dc8529cff14b108