Contract 0x4f70fcc44047d4eb1c24f8dd27da068ae39f55dd

/**
 *Submitted for verification at Arbiscan on 2023-03-12
*/

// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;


/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the token decimals.
     */
    function decimals() external view returns (uint8);

    /**
     * @dev Returns the token symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the token name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external view returns (address);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address _owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


contract ERC20 is Context, IERC20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the bep token owner.
     */
    function getOwner() external override view returns (address) {
        return owner();
    }

    /**
     * @dev Returns the token name.
     */
    function name() public override view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the token decimals.
     */
    function decimals() public override view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev Returns the token symbol.
     */
    function symbol() public override view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {ERC20-totalSupply}.
     */
    function totalSupply() public override view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {ERC20-balanceOf}.
     */
    function balanceOf(address account) public override view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {ERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {ERC20-allowance}.
     */
    function allowance(address owner, address spender) public override view returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {ERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {ERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for `sender`'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(
            sender,
            _msgSender(),
            _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance")
        );
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {ERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {ERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(
            _msgSender(),
            spender,
            _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero")
        );
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "ERC20: mint to the zero address");

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
     *
     * This is internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

}

// Ruby.
contract Ruby is ERC20('Ruby', 'Ruby') {
    
    /// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
    function mint(address _to, uint256 _amount) public onlyOwner {
        _mint(_to, _amount);
    }

    constructor (
        address _masterchef
    ) public {
        transferOwnership(_masterchef);
    }

}

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(
            value,
            "SafeERC20: decreased allowance below zero"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// MasterChef is the master of Ruby. He can make Ruby and he is a fair guy.
//
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once Ruby is sufficiently
// distributed and the community can show to govern itself.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
contract RubyMasterChef is Ownable, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // Info of each user.
    struct UserInfo {
        uint256 amount;         // How many LP tokens the user has provided.
        uint256 rewardDebt;     // Reward debt. See explanation below.
        //
        // We do some fancy math here. Basically, any point in time, the amount of Ruby
        // entitled to a user but is pending to be distributed is:
        //
        //   pending reward = (user.amount * pool.accRubyPerShare) - user.rewardDebt
        //
        // Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
        //   1. The pool's `accRubyPerShare` (and `lastRewardBlock`) gets updated.
        //   2. User receives the pending reward sent to his/her address.
        //   3. User's `amount` gets updated.
        //   4. User's `rewardDebt` gets updated.
    }

    // Info of each pool.
    struct PoolInfo {
        IERC20 lpToken;           // Address of LP token contract.
        uint256 allocPoint;       // How many allocation points assigned to this pool. ALPHAs to distribute per block.
        uint256 lastRewardBlock;  // Last block number that Ruby distribution occurs.
        uint256 accRubyPerShare;   // Accumulated Ruby per share, times 1e18. See below.
        uint16 depositFeeBP;      // Deposit fee in basis points
        uint256 lpSupply;
    }

    // The Ruby TOKEN!
    Ruby public immutable token;
    // Dev address.
    address public devaddr;
    // Ruby tokens created per block.
    uint256 public RubyPerBlock;
    // Deposit Fee address
    address public feeAddress;

    // Info of each pool.
    PoolInfo[] public poolInfo;
    // Info of each user that stakes LP tokens.
    mapping(uint256 => mapping(address => UserInfo)) public userInfo;
    // Total allocation points. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint = 0;
    // The block number when Ruby mining starts.
    uint256 public startBlock;

    // Maximum RubyPerBlock
    uint256 public MAX_EMISSION_RATE = 1 ether;


    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event SetFeeAddress(address indexed user, address indexed newAddress);
    event SetDevAddress(address indexed user, address indexed newAddress);
    event UpdateEmissionRate(address indexed user, uint256 RubyPerBlock);
    event addPool(uint256 indexed pid, address lpToken, uint256 allocPoint, uint256 depositFeeBP);
    event setPool(uint256 indexed pid, address lpToken, uint256 allocPoint, uint256 depositFeeBP);
    event UpdateStartBlock(uint256 newStartBlock);
    event RubyMintError(bytes reason);

    constructor(
        Ruby _tokenAddress,
        address _devaddr,
        address _feeAddress,
        uint256 _RubyPerBlock,
        uint256 _startBlock
    ) public {
        token = _tokenAddress;
        devaddr = _devaddr;
        feeAddress = _feeAddress;
        RubyPerBlock = _RubyPerBlock;
        startBlock = _startBlock;
    }

    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    mapping(IERC20 => bool) public poolExistence;
    modifier nonDuplicated(IERC20 _lpToken) {
        require(poolExistence[_lpToken] == false, "nonDuplicated: duplicated");
        _;
    }

    // Add a new lp to the pool. Can only be called by the owner.
    function add(uint256 _allocPoint, IERC20 _lpToken, uint16 _depositFeeBP, bool _withUpdate) external onlyOwner nonDuplicated(_lpToken) {
        // valid ERC20 token
        _lpToken.balanceOf(address(this));

        require(_depositFeeBP <= 400, "add: invalid deposit fee basis points");
        if (_withUpdate) {
            massUpdatePools();
        }
        uint256 lastRewardBlock = block.number > startBlock ? block.number : startBlock;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolExistence[_lpToken] = true;
        poolInfo.push(
            PoolInfo({
                lpToken : _lpToken,
                allocPoint : _allocPoint,
                lastRewardBlock : lastRewardBlock,
                accRubyPerShare : 0,
                depositFeeBP : _depositFeeBP,
                lpSupply: 0
            })
        );

        emit addPool(poolInfo.length - 1, address(_lpToken), _allocPoint, _depositFeeBP);
    }

    // Update the given pool's Ruby allocation point and deposit fee. Can only be called by the owner.
    function set(uint256 _pid, uint256 _allocPoint, uint16 _depositFeeBP, bool _withUpdate) external onlyOwner {
        require(_depositFeeBP <= 400, "set: invalid deposit fee basis points");
        if (_withUpdate) {
            massUpdatePools();
        }
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
        poolInfo[_pid].allocPoint = _allocPoint;
        poolInfo[_pid].depositFeeBP = _depositFeeBP;

        emit setPool(_pid, address(poolInfo[_pid].lpToken), _allocPoint, _depositFeeBP);
    }

    // Return reward multiplier over the given _from to _to block.
    function getMultiplier(uint256 _from, uint256 _to) public pure returns (uint256) {
        return _to.sub(_from);
    }

    // View function to see pending Alphas on frontend.
    function pendingRuby(uint256 _pid, address _user) external view returns (uint256) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accRubyPerShare = pool.accRubyPerShare;
        if (block.number > pool.lastRewardBlock && pool.lpSupply != 0 && totalAllocPoint > 0) {
            uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
            uint256 RubyReward = multiplier.mul(RubyPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
            accRubyPerShare = accRubyPerShare.add(RubyReward.mul(1e18).div(pool.lpSupply));
        }
        return user.amount.mul(accRubyPerShare).div(1e18).sub(user.rewardDebt);
    }

    // Update reward variables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }

    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.number <= pool.lastRewardBlock) {
            return;
        }
        if (pool.lpSupply == 0 || pool.allocPoint == 0) {
            pool.lastRewardBlock = block.number;
            return;
        }
        uint256 multiplier = getMultiplier(pool.lastRewardBlock, block.number);
        uint256 RubyReward = multiplier.mul(RubyPerBlock).mul(pool.allocPoint).div(totalAllocPoint);
        
        try token.mint(devaddr, RubyReward.div(10)) {
        } catch (bytes memory reason) {
            RubyReward = 0;
            emit RubyMintError(reason);
        }
        
        try token.mint(address(this), RubyReward) {
        } catch (bytes memory reason) {
            RubyReward = 0;
            emit RubyMintError(reason);
        }
        
        pool.accRubyPerShare = pool.accRubyPerShare.add(RubyReward.mul(1e18).div(pool.lpSupply));
        pool.lastRewardBlock = block.number;
    }
    
    // Deposit LP tokens to MasterChef for Ruby allocation.
    function deposit(uint256 _pid, uint256 _amount) external nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        if (user.amount > 0) {
            uint256 pending = user.amount.mul(pool.accRubyPerShare).div(1e18).sub(user.rewardDebt);
            if (pending > 0) {
                safeRubyTransfer(msg.sender, pending);
            }
        }
        if (_amount > 0) {
            uint256 balanceBefore = pool.lpToken.balanceOf(address(this));
            pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
            _amount = pool.lpToken.balanceOf(address(this)) - balanceBefore;
            if (pool.depositFeeBP > 0) {
                uint256 depositFee = _amount.mul(pool.depositFeeBP).div(10000);
                pool.lpToken.safeTransfer(feeAddress, depositFee);
                user.amount = user.amount.add(_amount).sub(depositFee);
                pool.lpSupply = pool.lpSupply.add(_amount).sub(depositFee);
            } else {
                user.amount = user.amount.add(_amount);
                pool.lpSupply = pool.lpSupply.add(_amount);
            }
        }
        user.rewardDebt = user.amount.mul(pool.accRubyPerShare).div(1e18);
        emit Deposit(msg.sender, _pid, _amount);
    }

    // Withdraw LP tokens from MasterChef.
    function withdraw(uint256 _pid, uint256 _amount) external nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        require(user.amount >= _amount, "withdraw: not good");
        updatePool(_pid);
        uint256 pending = user.amount.mul(pool.accRubyPerShare).div(1e18).sub(user.rewardDebt);
        if (pending > 0) {
            safeRubyTransfer(msg.sender, pending);
        }
        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            pool.lpToken.safeTransfer(address(msg.sender), _amount);
            pool.lpSupply = pool.lpSupply.sub(_amount);
        }
        user.rewardDebt = user.amount.mul(pool.accRubyPerShare).div(1e18);
        emit Withdraw(msg.sender, _pid, _amount);
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) external nonReentrant {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        uint256 amount = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;
        pool.lpToken.safeTransfer(address(msg.sender), amount);

        if (pool.lpSupply >=  amount) {
            pool.lpSupply = pool.lpSupply.sub(amount);
        } else {
            pool.lpSupply = 0;
        }

        emit EmergencyWithdraw(msg.sender, _pid, amount);
    }

    // Safe Ruby transfer function, just in case if rounding error causes pool to not have enough ALPHAs.
    function safeRubyTransfer(address _to, uint256 _amount) internal {
        uint256 RubyBal = token.balanceOf(address(this));
        bool transferSuccess = false;
        if (_amount > RubyBal) {
            transferSuccess = token.transfer(_to, RubyBal);
        } else {
            transferSuccess = token.transfer(_to, _amount);
        }
        require(transferSuccess, "safeRubyTransfer: transfer failed");
    }

    // Update dev address.
    function setDevAddress(address _devaddr) external {
        require(msg.sender == devaddr, "setDevAddress: ACCESS DENIED");
        require(_devaddr != address(0), "setDevAddress: INCORRECT INPUT");
        devaddr = _devaddr;
        emit SetDevAddress(msg.sender, _devaddr);
    }

    function setFeeAddress(address _feeAddress) external {
        require(msg.sender == feeAddress, "setFeeAddress: ACCESS DENIED");
        require(_feeAddress != address(0), "setFeeAddress: INCORRECT INPUT");
        feeAddress = _feeAddress;
        emit SetFeeAddress(msg.sender, _feeAddress);
    }

    // Pancake has to add hidden dummy pools inorder to alter the emission, here we make it simple and transparent to all.
    function updateEmissionRate(uint256 _RubyPerBlock) external onlyOwner {
        require(_RubyPerBlock <= MAX_EMISSION_RATE, "INCORRECT INPUT");
        massUpdatePools();
        RubyPerBlock = _RubyPerBlock;
        emit UpdateEmissionRate(msg.sender, _RubyPerBlock);
    }

    // Only update before start of farm
    function updateStartBlock(uint256 _newStartBlock) external onlyOwner {
        require(block.number < startBlock, "FARM ALREADY STARTED");
        require(block.number < _newStartBlock, "INCORRECT INPUT");
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            PoolInfo storage pool = poolInfo[pid];
            pool.lastRewardBlock = _newStartBlock;
        }
        startBlock = _newStartBlock;

        emit UpdateStartBlock(startBlock);
    }
}

[{"inputs":[{"internalType":"contract Ruby","name":"_tokenAddress","type":"address"},{"internalType":"address","name":"_devaddr","type":"address"},{"internalType":"address","name":"_feeAddress","type":"address"},{"internalType":"uint256","name":"_RubyPerBlock","type":"uint256"},{"internalType":"uint256","name":"_startBlock","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bytes","name":"reason","type":"bytes"}],"name":"RubyMintError","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newAddress","type":"address"}],"name":"SetDevAddress","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"address","name":"newAddress","type":"address"}],"name":"SetFeeAddress","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"RubyPerBlock","type":"uint256"}],"name":"UpdateEmissionRate","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"newStartBlock","type":"uint256"}],"name":"UpdateStartBlock","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"address","name":"lpToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"allocPoint","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"depositFeeBP","type":"uint256"}],"name":"addPool","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"address","name":"lpToken","type":"address"},{"indexed":false,"internalType":"uint256","name":"allocPoint","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"depositFeeBP","type":"uint256"}],"name":"setPool","type":"event"},{"inputs":[],"name":"MAX_EMISSION_RATE","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"RubyPerBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IERC20","name":"_lpToken","type":"address"},{"internalType":"uint16","name":"_depositFeeBP","type":"uint16"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"devaddr","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"feeAddress","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_from","type":"uint256"},{"internalType":"uint256","name":"_to","type":"uint256"}],"name":"getMultiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"pendingRuby","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"name":"poolExistence","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IERC20","name":"lpToken","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardBlock","type":"uint256"},{"internalType":"uint256","name":"accRubyPerShare","type":"uint256"},{"internalType":"uint16","name":"depositFeeBP","type":"uint16"},{"internalType":"uint256","name":"lpSupply","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"uint16","name":"_depositFeeBP","type":"uint16"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_devaddr","type":"address"}],"name":"setDevAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_feeAddress","type":"address"}],"name":"setFeeAddress","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startBlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"token","outputs":[{"internalType":"contract Ruby","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_RubyPerBlock","type":"uint256"}],"name":"updateEmissionRate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_newStartBlock","type":"uint256"}],"name":"updateStartBlock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000146ae0fe9963ea78eff8c4c9743116c9f59a7d15000000000000000000000000575970c86977bed1f0aac77d25db16858805cd10000000000000000000000000575970c86977bed1f0aac77d25db16858805cd1000000000000000000000000000000000000000000000000000038d7ea4c68000000000000000000000000000000000000000000000000000000000000433bea0

-----Decoded View---------------
Arg [0] : _tokenAddress (address): 0x146ae0fe9963ea78eff8c4c9743116c9f59a7d15
Arg [1] : _devaddr (address): 0x575970c86977bed1f0aac77d25db16858805cd10
Arg [2] : _feeAddress (address): 0x575970c86977bed1f0aac77d25db16858805cd10
Arg [3] : _RubyPerBlock (uint256): 1000000000000000
Arg [4] : _startBlock (uint256): 70500000

-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 000000000000000000000000146ae0fe9963ea78eff8c4c9743116c9f59a7d15
Arg [1] : 000000000000000000000000575970c86977bed1f0aac77d25db16858805cd10
Arg [2] : 000000000000000000000000575970c86977bed1f0aac77d25db16858805cd10
Arg [3] : 00000000000000000000000000000000000000000000000000038d7ea4c68000
Arg [4] : 000000000000000000000000000000000000000000000000000000000433bea0

36302:12792:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;37930:27;;;:::i;:::-;;;;;;;;;;;;;;;;;;;39630:95;;;:::i;:::-;;;;;;;;;;;;;;;;;;;48253:279;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;38053:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;38294:34;;;:::i;:::-;;;;;;;;;;;;;;;;;;;37992:25;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;38448:42;;;:::i;:::-;;;;;;;;;;;;;;;;;;;45495:814;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;38385:25;;;:::i;:::-;;;;;;;;;;;;;;;;;;;42970:1034;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;46380:562;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;42714:180;;;:::i;:::-;;12604:148;;;:::i;:::-;;40000:977;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;47816:305;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;11953:87;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;41720:121;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;38135:64;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;41906:725;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;39733:44;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;47521:287;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;37862:22;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;41089:555;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;44077:1366;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;12907:244;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;48581:510;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;37807:27;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;37930;;;;:::o;39630:95::-;39675:7;39702:8;:15;;;;39695:22;;39630:95;:::o;48253:279::-;12184:12;:10;:12::i;:::-;12173:23;;:7;:5;:7::i;:::-;:23;;;12165:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48359:17:::1;;48342:13;:34;;48334:62;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;48407:17;:15;:17::i;:::-;48450:13;48435:12;:28;;;;48498:10;48479:45;;;48510:13;48479:45;;;;;;;;;;;;;;;;;;48253:279:::0;:::o;38053:26::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;38294:34::-;;;;:::o;37992:25::-;;;;;;;;;;;;;:::o;38448:42::-;;;;:::o;45495:814::-;1713:1;2319:7;;:19;;2311:63;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1713:1;2452:7;:18;;;;45577:21:::1;45601:8;45610:4;45601:14;;;;;;;;;;;;;;;;;;45577:38;;45626:21;45650:8;:14;45659:4;45650:14;;;;;;;;;;;:26;45665:10;45650:26;;;;;;;;;;;;;;;45626:50;;45710:7;45695:4;:11;;;:22;;45687:53;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;45751:16;45762:4;45751:10;:16::i;:::-;45778:15;45796:68;45848:4;:15;;;45796:47;45838:4;45796:37;45812:4;:20;;;45796:4;:11;;;:15;;:37;;;;:::i;:::-;:41;;:47;;;;:::i;:::-;:51;;:68;;;;:::i;:::-;45778:86;;45889:1;45879:7;:11;45875:81;;;45907:37;45924:10;45936:7;45907:16;:37::i;:::-;45875:81;45980:1;45970:7;:11;45966:209;;;46012:24;46028:7;46012:4;:11;;;:15;;:24;;;;:::i;:::-;45998:4;:11;;:38;;;;46051:55;46085:10;46098:7;46051:4;:12;;;;;;;;;;;;:25;;;;:55;;;;;:::i;:::-;46137:26;46155:7;46137:4;:13;;;:17;;:26;;;;:::i;:::-;46121:4;:13;;:42;;;;45966:209;46203:47;46245:4;46203:37;46219:4;:20;;;46203:4;:11;;;:15;;:37;;;;:::i;:::-;:41;;:47;;;;:::i;:::-;46185:4;:15;;:65;;;;46287:4;46275:10;46266:35;;;46293:7;46266:35;;;;;;;;;;;;;;;;;;2483:1;;;1669::::0;2631:7;:22;;;;45495:814;;:::o;38385:25::-;;;;:::o;42970:1034::-;43022:21;43046:8;43055:4;43046:14;;;;;;;;;;;;;;;;;;43022:38;;43091:4;:20;;;43075:12;:36;43071:75;;43128:7;;;43071:75;43177:1;43160:4;:13;;;:18;:42;;;;43201:1;43182:4;:15;;;:20;43160:42;43156:131;;;43242:12;43219:4;:20;;:35;;;;43269:7;;;43156:131;43297:18;43318:49;43332:4;:20;;;43354:12;43318:13;:49::i;:::-;43297:70;;43378:18;43399:70;43453:15;;43399:49;43432:4;:15;;;43399:28;43414:12;;43399:10;:14;;:28;;;;:::i;:::-;:32;;:49;;;;:::i;:::-;:53;;:70;;;;:::i;:::-;43378:91;;43494:5;:10;;;43505:7;;;;;;;;;;;43514:18;43529:2;43514:10;:14;;:18;;;;:::i;:::-;43494:39;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;43490:167;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;43603:1;43590:14;;43624:21;43638:6;43624:21;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;43547:110;43490:167;;;;43681:5;:10;;;43700:4;43707:10;43681:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;43677:165;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;43788:1;43775:14;;43809:21;43823:6;43809:21;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;43732:110;43677:165;;;;43885:65;43910:39;43935:4;:13;;;43910:20;43925:4;43910:10;:14;;:20;;;;:::i;:::-;:24;;:39;;;;:::i;:::-;43885:4;:20;;;:24;;:65;;;;:::i;:::-;43862:4;:20;;:88;;;;43984:12;43961:4;:20;;:35;;;;42970:1034;;;;;:::o;46380:562::-;1713:1;2319:7;;:19;;2311:63;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1713:1;2452:7;:18;;;;46454:21:::1;46478:8;46487:4;46478:14;;;;;;;;;;;;;;;;;;46454:38;;46503:21;46527:8;:14;46536:4;46527:14;;;;;;;;;;;:26;46542:10;46527:26;;;;;;;;;;;;;;;46503:50;;46564:14;46581:4;:11;;;46564:28;;46617:1;46603:4;:11;;:15;;;;46647:1;46629:4;:15;;:19;;;;46659:54;46693:10;46706:6;46659:4;:12;;;;;;;;;;;;:25;;;;:54;;;;;:::i;:::-;46748:6;46730:4;:13;;;:24;46726:148;;46787:25;46805:6;46787:4;:13;;;:17;;:25;;;;:::i;:::-;46771:4;:13;;:41;;;;46726:148;;;46861:1;46845:4;:13;;:17;;;;46726:148;46921:4;46909:10;46891:43;;;46927:6;46891:43;;;;;;;;;;;;;;;;;;2483:1;;;1669::::0;2631:7;:22;;;;46380:562;:::o;42714:180::-;42759:14;42776:8;:15;;;;42759:32;;42807:11;42802:85;42830:6;42824:3;:12;42802:85;;;42860:15;42871:3;42860:10;:15::i;:::-;42838:5;;;;;42802:85;;;;42714:180;:::o;12604:148::-;12184:12;:10;:12::i;:::-;12173:23;;:7;:5;:7::i;:::-;:23;;;12165:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;12711:1:::1;12674:40;;12695:6;::::0;::::1;;;;;;;;12674:40;;;;;;;;;;;;12742:1;12725:6:::0;::::1;:19;;;;;;;;;;;;;;;;;;12604:148::o:0;40000:977::-;12184:12;:10;:12::i;:::-;12173:23;;:7;:5;:7::i;:::-;:23;;;12165:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;40124:8:::1;39870:5;39843:32;;:13;:23;39857:8;39843:23;;;;;;;;;;;;;;;;;;;;;;;;;:32;;;39835:70;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;40175:8:::2;:18;;;40202:4;40175:33;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;;;;;;;;::::0;::::2;;;;;;;;;;;;;;;;;;;40246:3;40229:13;:20;;;;40221:70;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;40306:11;40302:61;;;40334:17;:15;:17::i;:::-;40302:61;40373:23;40414:10;;40399:12;:25;:53;;40442:10;;40399:53;;;40427:12;40399:53;40373:79;;40481:32;40501:11;40481:15;;:19;;:32;;;;:::i;:::-;40463:15;:50;;;;40550:4;40524:13;:23;40538:8;40524:23;;;;;;;;;;;;;;;;:30;;;;;;;;;;;;;;;;;;40565:8;40593:272;;;;;;;;40631:8;40593:272;;;;;;40671:11;40593:272;;;;40719:15;40593:272;;;;40771:1;40593:272;;;;40806:13;40593:272;;;;;;40848:1;40593:272;;::::0;40565:311:::2;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;40920:1;40902:8;:15;;;;:19;40894:75;40931:8;40942:11;40955:13;40894:75;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;39916:1;12244::::1;40000:977:::0;;;;:::o;47816:305::-;47902:10;;;;;;;;;;;47888:24;;:10;:24;;;47880:65;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47987:1;47964:25;;:11;:25;;;;47956:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48048:11;48035:10;;:24;;;;;;;;;;;;;;;;;;48101:11;48075:38;;48089:10;48075:38;;;;;;;;;;;;47816:305;:::o;11953:87::-;11999:7;12026:6;;;;;;;;;;;12019:13;;11953:87;:::o;41720:121::-;41792:7;41819:14;41827:5;41819:3;:7;;:14;;;;:::i;:::-;41812:21;;41720:121;;;;:::o;38135:64::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;41906:725::-;41979:7;41999:21;42023:8;42032:4;42023:14;;;;;;;;;;;;;;;;;;41999:38;;42048:21;42072:8;:14;42081:4;42072:14;;;;;;;;;;;:21;42087:5;42072:21;;;;;;;;;;;;;;;42048:45;;42104:23;42130:4;:20;;;42104:46;;42180:4;:20;;;42165:12;:35;:57;;;;;42221:1;42204:4;:13;;;:18;;42165:57;:80;;;;;42244:1;42226:15;;:19;42165:80;42161:382;;;42262:18;42283:49;42297:4;:20;;;42319:12;42283:13;:49::i;:::-;42262:70;;42347:18;42368:70;42422:15;;42368:49;42401:4;:15;;;42368:28;42383:12;;42368:10;:14;;:28;;;;:::i;:::-;:32;;:49;;;;:::i;:::-;:53;;:70;;;;:::i;:::-;42347:91;;42471:60;42491:39;42516:4;:13;;;42491:20;42506:4;42491:10;:14;;:20;;;;:::i;:::-;:24;;:39;;;;:::i;:::-;42471:15;:19;;:60;;;;:::i;:::-;42453:78;;42161:382;;;42560:63;42607:4;:15;;;42560:42;42597:4;42560:32;42576:15;42560:4;:11;;;:15;;:32;;;;:::i;:::-;:36;;:42;;;;:::i;:::-;:46;;:63;;;;:::i;:::-;42553:70;;;;;41906:725;;;;:::o;39733:44::-;;;;;;;;;;;;;;;;;;;;;;:::o;47521:287::-;47604:7;;;;;;;;;;;47590:21;;:10;:21;;;47582:62;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47683:1;47663:22;;:8;:22;;;;47655:65;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47741:8;47731:7;;:18;;;;;;;;;;;;;;;;;;47791:8;47765:35;;47779:10;47765:35;;;;;;;;;;;;47521:287;:::o;37862:22::-;;;;;;;;;;;;;:::o;41089:555::-;12184:12;:10;:12::i;:::-;12173:23;;:7;:5;:7::i;:::-;:23;;;12165:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;41232:3:::1;41215:13;:20;;;;41207:70;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;41292:11;41288:61;;;41320:17;:15;:17::i;:::-;41288:61;41377:63;41428:11;41377:46;41397:8;41406:4;41397:14;;;;;;;;;;;;;;;;;;:25;;;41377:15;;:19;;:46;;;;:::i;:::-;:50;;:63;;;;:::i;:::-;41359:15;:81;;;;41479:11;41451:8;41460:4;41451:14;;;;;;;;;;;;;;;;;;:25;;:39;;;;41531:13;41501:8;41510:4;41501:14;;;;;;;;;;;;;;;;;;:27;;;:43;;;;;;;;;;;;;;;;;;41570:4;41562:74;41584:8;41593:4;41584:14;;;;;;;;;;;;;;;;;;:22;;;;;;;;;;;;41609:11;41622:13;41562:74;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;41089:555:::0;;;;:::o;44077:1366::-;1713:1;2319:7;;:19;;2311:63;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1713:1;2452:7;:18;;;;44158:21:::1;44182:8;44191:4;44182:14;;;;;;;;;;;;;;;;;;44158:38;;44207:21;44231:8;:14;44240:4;44231:14;;;;;;;;;;;:26;44246:10;44231:26;;;;;;;;;;;;;;;44207:50;;44268:16;44279:4;44268:10;:16::i;:::-;44313:1;44299:4;:11;;;:15;44295:237;;;44331:15;44349:68;44401:4;:15;;;44349:47;44391:4;44349:37;44365:4;:20;;;44349:4;:11;;;:15;;:37;;;;:::i;:::-;:41;;:47;;;;:::i;:::-;:51;;:68;;;;:::i;:::-;44331:86;;44446:1;44436:7;:11;44432:89;;;44468:37;44485:10;44497:7;44468:16;:37::i;:::-;44432:89;44295:237;;44556:1;44546:7;:11;44542:768;;;44574:21;44598:4;:12;;;;;;;;;;;;:22;;;44629:4;44598:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;44574:61;;44650:74;44688:10;44709:4;44716:7;44650:4;:12;;;;;;;;;;;;:29;;;;:74;;;;;;:::i;:::-;44789:13;44749:4;:12;;;;;;;;;;;;:22;;;44780:4;44749:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;;;;;;:53;44739:63;;44841:1;44821:4;:17;;;;;;;;;;;;:21;;;44817:482;;;44863:18;44884:41;44919:5;44884:30;44896:4;:17;;;;;;;;;;;;44884:30;;:7;:11;;:30;;;;:::i;:::-;:34;;:41;;;;:::i;:::-;44863:62;;44944:49;44970:10;;;;;;;;;;;44982;44944:4;:12;;;;;;;;;;;;:25;;;;:49;;;;;:::i;:::-;45026:40;45055:10;45026:24;45042:7;45026:4;:11;;;:15;;:24;;;;:::i;:::-;:28;;:40;;;;:::i;:::-;45012:4;:11;;:54;;;;45101:42;45132:10;45101:26;45119:7;45101:4;:13;;;:17;;:26;;;;:::i;:::-;:30;;:42;;;;:::i;:::-;45085:4;:13;;:58;;;;44817:482;;;;45198:24;45214:7;45198:4;:11;;;:15;;:24;;;;:::i;:::-;45184:4;:11;;:38;;;;45257:26;45275:7;45257:4;:13;;;:17;;:26;;;;:::i;:::-;45241:4;:13;;:42;;;;44817:482;44542:768;;45338:47;45380:4;45338:37;45354:4;:20;;;45338:4;:11;;;:15;;:37;;;;:::i;:::-;:41;;:47;;;;:::i;:::-;45320:4;:15;;:65;;;;45421:4;45409:10;45401:34;;;45427:7;45401:34;;;;;;;;;;;;;;;;;;2483:1;;1669::::0;2631:7;:22;;;;44077:1366;;:::o;12907:244::-;12184:12;:10;:12::i;:::-;12173:23;;:7;:5;:7::i;:::-;:23;;;12165:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13016:1:::1;12996:22;;:8;:22;;;;12988:73;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13106:8;13077:38;;13098:6;::::0;::::1;;;;;;;;13077:38;;;;;;;;;;;;13135:8;13126:6;::::0;:17:::1;;;;;;;;;;;;;;;;;;12907:244:::0;:::o;48581:510::-;12184:12;:10;:12::i;:::-;12173:23;;:7;:5;:7::i;:::-;:23;;;12165:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;48684:10:::1;;48669:12;:25;48661:58;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;48753:14;48738:12;:29;48730:57;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;;48798:14;48815:8;:15;;;;48798:32;;48846:11;48841:159;48869:6;48863:3;:12;48841:159;;;48899:21;48923:8;48932:3;48923:13;;;;;;;;;;;;;;;;;;48899:37;;48974:14;48951:4;:20;;:37;;;;48841:159;48877:5;;;;;48841:159;;;;49023:14;49010:10;:27;;;;49055:28;49072:10;;49055:28;;;;;;;;;;;;;;;;;;12244:1;48581:510:::0;:::o;37807:27::-;;;:::o;3211:106::-;3264:15;3299:10;3292:17;;3211:106;:::o;7148:220::-;7206:7;7235:1;7230;:6;7226:20;;;7245:1;7238:8;;;;7226:20;7257:9;7273:1;7269;:5;7257:17;;7302:1;7297;7293;:5;;;;;;:10;7285:56;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;7359:1;7352:8;;;7148:220;;;;;:::o;7846:153::-;7904:7;7936:1;7932;:5;7924:44;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;7990:1;7986;:5;;;;;;7979:12;;7846:153;;;;:::o;6731:158::-;6789:7;6822:1;6817;:6;;6809:49;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;6880:1;6876;:5;6869:12;;6731:158;;;;:::o;47057:428::-;47133:15;47151:5;:15;;;47175:4;47151:30;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47133:48;;47192:20;47245:7;47235;:17;47231:175;;;47287:5;:14;;;47302:3;47307:7;47287:28;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47269:46;;47231:175;;;47366:5;:14;;;47381:3;47386:7;47366:28;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47348:46;;47231:175;47424:15;47416:61;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;47057:428;;;;:::o;32618:211::-;32735:86;32755:5;32785:23;;;32810:2;32814:5;32762:58;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32735:19;:86::i;:::-;32618:211;;;:::o;6269:179::-;6327:7;6347:9;6363:1;6359;:5;6347:17;;6388:1;6383;:6;;6375:46;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;6439:1;6432:8;;;6269:179;;;;:::o;32837:248::-;32981:96;33001:5;33031:27;;;33060:4;33066:2;33070:5;33008:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;32981:19;:96::i;:::-;32837:248;;;;:::o;35153:774::-;35577:23;35603:69;35631:4;35603:69;;;;;;;;;;;;;;;;;35611:5;35603:27;;;;:69;;;;;:::i;:::-;35577:95;;35707:1;35687:10;:17;:21;35683:237;;;35842:10;35831:30;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;35823:85;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;35683:237;35153:774;;;:::o;16757:195::-;16860:12;16892:52;16914:6;16922:4;16928:1;16931:12;16892:21;:52::i;:::-;16885:59;;16757:195;;;;;:::o;17809:530::-;17936:12;17994:5;17969:21;:30;;17961:81;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18061:18;18072:6;18061:10;:18::i;:::-;18053:60;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18187:12;18201:23;18228:6;:11;;18248:5;18256:4;18228:33;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18186:75;;;;18279:52;18297:7;18306:10;18318:12;18279:17;:52::i;:::-;18272:59;;;;17809:530;;;;;;:::o;13839:422::-;13899:4;14107:12;14218:7;14206:20;14198:28;;14252:1;14245:4;:8;14238:15;;;13839:422;;;:::o;20349:742::-;20464:12;20493:7;20489:595;;;20524:10;20517:17;;;;20489:595;20658:1;20638:10;:17;:21;20634:439;;;20901:10;20895:17;20962:15;20949:10;20945:2;20941:19;20934:44;20849:148;21044:12;21037:20;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;20349:742;;;;;;:::o

26e2caf10725b2d6cb20a55dd2f0dd29c28610f12084fef1a4fb209c0914f8eb