Contract 0x23208b91a98c7c1cd9fe63085bff68311494f193 1

/**
 *Submitted for verification at arbiscan.io on 2021-08-30
*/

// Sources flattened with hardhat v2.6.1 https://hardhat.org

// File contracts/libraries/math/SafeMath.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}


// File contracts/libraries/token/IERC20.sol


pragma solidity 0.6.12;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File contracts/libraries/utils/Address.sol


pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.3._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File contracts/libraries/token/SafeERC20.sol


pragma solidity 0.6.12;



/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}


// File contracts/libraries/utils/ReentrancyGuard.sol


pragma solidity 0.6.12;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}


// File contracts/staking/interfaces/IRewardDistributor.sol


pragma solidity 0.6.12;

interface IRewardDistributor {
    function rewardToken() external view returns (address);
    function tokensPerInterval() external view returns (uint256);
    function pendingRewards() external view returns (uint256);
    function distribute() external returns (uint256);
}


// File contracts/staking/interfaces/IRewardTracker.sol


pragma solidity 0.6.12;

interface IRewardTracker {
    function depositBalances(address _account, address _depositToken) external returns (uint256);
    function stakedAmounts(address _account) external returns (uint256);
    function updateRewards() external;
    function stake(address _depositToken, uint256 _amount) external;
    function stakeForAccount(address _fundingAccount, address _account, address _depositToken, uint256 _amount) external;
    function unstake(address _depositToken, uint256 _amount) external;
    function unstakeForAccount(address _account, address _depositToken, uint256 _amount, address _receiver) external;
    function tokensPerInterval() external view returns (uint256);
    function claim(address _receiver) external returns (uint256);
    function claimForAccount(address _account, address _receiver) external returns (uint256);
    function claimable(address _account) external view returns (uint256);
    function averageStakedAmounts(address _account) external view returns (uint256);
    function cumulativeRewards(address _account) external view returns (uint256);
}


// File contracts/access/Governable.sol


pragma solidity 0.6.12;

contract Governable {
    address public gov;

    constructor() public {
        gov = msg.sender;
    }

    modifier onlyGov() {
        require(msg.sender == gov, "Governable: forbidden");
        _;
    }

    function setGov(address _gov) external onlyGov {
        gov = _gov;
    }
}


// File contracts/staking/RewardDistributor.sol


pragma solidity 0.6.12;






contract RewardDistributor is IRewardDistributor, ReentrancyGuard, Governable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    address public override rewardToken;
    uint256 public override tokensPerInterval;
    uint256 public lastDistributionTime;
    address public rewardTracker;

    address public admin;

    event Distribute(uint256 amount);
    event TokensPerIntervalChange(uint256 amount);

    modifier onlyAdmin() {
        require(msg.sender == admin, "RewardDistributor: forbidden");
        _;
    }

    constructor(address _rewardToken, address _rewardTracker) public {
        rewardToken = _rewardToken;
        rewardTracker = _rewardTracker;
        admin = msg.sender;
    }

    function setAdmin(address _admin) external onlyGov {
        admin = _admin;
    }

    // to help users who accidentally send their tokens to this contract
    function withdrawToken(address _token, address _account, uint256 _amount) external onlyGov {
        IERC20(_token).safeTransfer(_account, _amount);
    }

    function updateLastDistributionTime() external onlyAdmin {
        lastDistributionTime = block.timestamp;
    }

    function setTokensPerInterval(uint256 _amount) external onlyAdmin {
        require(lastDistributionTime != 0, "RewardDistributor: invalid lastDistributionTime");
        IRewardTracker(rewardTracker).updateRewards();
        tokensPerInterval = _amount;
        emit TokensPerIntervalChange(_amount);
    }

    function pendingRewards() public view override returns (uint256) {
        if (block.timestamp == lastDistributionTime) {
            return 0;
        }

        uint256 timeDiff = block.timestamp.sub(lastDistributionTime);
        return tokensPerInterval.mul(timeDiff);
    }

    function distribute() external override returns (uint256) {
        require(msg.sender == rewardTracker, "RewardDistributor: invalid msg.sender");
        uint256 amount = pendingRewards();
        if (amount == 0) { return 0; }

        lastDistributionTime = block.timestamp;

        uint256 balance = IERC20(rewardToken).balanceOf(address(this));
        if (amount > balance) { amount = balance; }

        IERC20(rewardToken).safeTransfer(msg.sender, amount);

        emit Distribute(amount);
        return amount;
    }
}

[{"inputs":[{"internalType":"address","name":"_rewardToken","type":"address"},{"internalType":"address","name":"_rewardTracker","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Distribute","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"TokensPerIntervalChange","type":"event"},{"inputs":[],"name":"admin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"distribute","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"gov","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lastDistributionTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingRewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardToken","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardTracker","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_admin","type":"address"}],"name":"setAdmin","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_gov","type":"address"}],"name":"setGov","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"setTokensPerInterval","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"tokensPerInterval","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"updateLastDistributionTime","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_token","type":"address"},{"internalType":"address","name":"_account","type":"address"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdrawToken","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000f42ae1d54fd613c9bb14810b0588faaa09a426ca000000000000000000000000908c4d94d34924765f1edc22a1dd098397c59dd4

-----Decoded View---------------
Arg [0] : _rewardToken (address): 0xf42ae1d54fd613c9bb14810b0588faaa09a426ca
Arg [1] : _rewardTracker (address): 0x908c4d94d34924765f1edc22a1dd098397c59dd4

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000f42ae1d54fd613c9bb14810b0588faaa09a426ca
Arg [1] : 000000000000000000000000908c4d94d34924765f1edc22a1dd098397c59dd4

24737:2362:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;25655:156;;;;;;;;;;;;;;;;-1:-1:-1;;;;;;25655:156:0;;;;;;;;;;;;;;;;;:::i;:::-;;24362:18;;;:::i;:::-;;;;-1:-1:-1;;;;;24362:18:0;;;;;;;;;;;;;;25941:312;;;;;;;;;;;;;;;;-1:-1:-1;25941:312:0;;:::i;25819:114::-;;;:::i;25022:28::-;;;:::i;25489:84::-;;;;;;;;;;;;;;;;-1:-1:-1;25489:84:0;-1:-1:-1;;;;;25489:84:0;;:::i;24980:35::-;;;:::i;:::-;;;;;;;;;;;;;;;;24932:41;;;:::i;24562:76::-;;;;;;;;;;;;;;;;-1:-1:-1;24562:76:0;-1:-1:-1;;;;;24562:76:0;;:::i;26554:542::-;;;:::i;26261:285::-;;;:::i;24890:35::-;;;:::i;25059:20::-;;;:::i;25655:156::-;24505:3;;-1:-1:-1;;;;;24505:3:0;24491:10;:17;24483:51;;;;;-1:-1:-1;;;24483:51:0;;;;;;;;;;;;-1:-1:-1;;;24483:51:0;;;;;;;;;;;;;;;25757:46:::1;-1:-1:-1::0;;;;;25757:27:0;::::1;25785:8:::0;25795:7;25757:27:::1;:46::i;:::-;25655:156:::0;;;:::o;24362:18::-;;;-1:-1:-1;;;;;24362:18:0;;:::o;25941:312::-;25235:5;;-1:-1:-1;;;;;25235:5:0;25221:10;:19;25213:60;;;;;-1:-1:-1;;;25213:60:0;;;;;;;;;;;;-1:-1:-1;;;25213:60:0;;;;;;;;;;;;;;;26026:20:::1;::::0;26018:85:::1;;;;-1:-1:-1::0;;;26018:85:0::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26129:13;;;;;;;;;-1:-1:-1::0;;;;;26129:13:0::1;-1:-1:-1::0;;;;;26114:43:0::1;;:45;;;;;;;;;;;;;;;;;;;;;;;;;;;;::::0;::::1;;;;;;;;;;;;::::0;::::1;;;;;-1:-1:-1::0;;;26170:17:0::1;:27:::0;;;-1:-1:-1;26213:32:0::1;::::0;;;;;;;::::1;::::0;;;;::::1;::::0;;::::1;25941:312:::0;:::o;25819:114::-;25235:5;;-1:-1:-1;;;;;25235:5:0;25221:10;:19;25213:60;;;;;-1:-1:-1;;;25213:60:0;;;;;;;;;;;;-1:-1:-1;;;25213:60:0;;;;;;;;;;;;;;;25910:15:::1;25887:20;:38:::0;25819:114::o;25022:28::-;;;-1:-1:-1;;;;;25022:28:0;;:::o;25489:84::-;24505:3;;-1:-1:-1;;;;;24505:3:0;24491:10;:17;24483:51;;;;;-1:-1:-1;;;24483:51:0;;;;;;;;;;;;-1:-1:-1;;;24483:51:0;;;;;;;;;;;;;;;25551:5:::1;:14:::0;;-1:-1:-1;;;;;;25551:14:0::1;-1:-1:-1::0;;;;;25551:14:0;;;::::1;::::0;;;::::1;::::0;;25489:84::o;24980:35::-;;;;:::o;24932:41::-;;;;:::o;24562:76::-;24505:3;;-1:-1:-1;;;;;24505:3:0;24491:10;:17;24483:51;;;;;-1:-1:-1;;;24483:51:0;;;;;;;;;;;;-1:-1:-1;;;24483:51:0;;;;;;;;;;;;;;;24620:3:::1;:10:::0;;-1:-1:-1;;;;;;24620:10:0::1;-1:-1:-1::0;;;;;24620:10:0;;;::::1;::::0;;;::::1;::::0;;24562:76::o;26554:542::-;26645:13;;26603:7;;-1:-1:-1;;;;;26645:13:0;26631:10;:27;26623:77;;;;-1:-1:-1;;;26623:77:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;26711:14;26728:16;:14;:16::i;:::-;26711:33;-1:-1:-1;26759:11:0;26755:30;;26781:1;26774:8;;;;;26755:30;26820:15;26797:20;:38;;;26873:11;;26866:44;;;-1:-1:-1;;;26866:44:0;;26904:4;26866:44;;;;;;;;26848:15;;-1:-1:-1;;;;;26873:11:0;;;;26866:29;;:44;;;;;;;;;;;;;;26873:11;26866:44;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;26866:44:0;;-1:-1:-1;26925:16:0;;;26921:43;;;26954:7;26945:16;;26921:43;26983:11;;26976:52;;-1:-1:-1;;;;;26983:11:0;27009:10;27021:6;26976:32;:52::i;:::-;27046:18;;;;;;;;;;;;;;;;;-1:-1:-1;27082:6:0;-1:-1:-1;26554:542:0;;:::o;26261:285::-;26317:7;26360:20;;26341:15;:39;26337:80;;;-1:-1:-1;26404:1:0;26397:8;;26337:80;26429:16;26448:41;26468:20;;26448:15;:19;;:41;;;;:::i;:::-;26507:17;;26429:60;;-1:-1:-1;26507:31:0;;26429:60;26507:21;:31::i;:::-;26500:38;;;26261:285;:::o;24890:35::-;;;-1:-1:-1;;;;;24890:35:0;;:::o;25059:20::-;;;-1:-1:-1;;;;;25059:20:0;;:::o;16932:177::-;17042:58;;;-1:-1:-1;;;;;17042:58:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;;;;17042:58:0;-1:-1:-1;;;17042:58:0;;;17015:86;;17035:5;;17015:19;:86::i;1479:136::-;1537:7;1564:43;1568:1;1571;1564:43;;;;;;;;;;;;;;;;;:3;:43::i;:::-;1557:50;;1479:136;;;;;:::o;2369:471::-;2427:7;2672:6;2668:47;;-1:-1:-1;2702:1:0;2695:8;;2668:47;2739:5;;;2743:1;2739;:5;:1;2763:5;;;;;:10;2755:56;;;;-1:-1:-1;;;2755:56:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;19237:761;19661:23;19687:69;19715:4;19687:69;;;;;;;;;;;;;;;;;19695:5;-1:-1:-1;;;;;19687:27:0;;;:69;;;;;:::i;:::-;19771:17;;19661:95;;-1:-1:-1;19771:21:0;19767:224;;19913:10;19902:30;;;;;;;;;;;;;;;-1:-1:-1;19902:30:0;19894:85;;;;-1:-1:-1;;;19894:85:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;1918:192;2004:7;2040:12;2032:6;;;;2024:29;;;;-1:-1:-1;;;2024:29:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;2076:5:0;;;1918:192;;;;;;:::o;11946:195::-;12049:12;12081:52;12103:6;12111:4;12117:1;12120:12;12081:21;:52::i;:::-;12074:59;11946:195;-1:-1:-1;;;;11946:195:0:o;12998:530::-;13125:12;13183:5;13158:21;:30;;13150:81;;;;-1:-1:-1;;;13150:81:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13250:18;13261:6;13250:10;:18::i;:::-;13242:60;;;;;-1:-1:-1;;;13242:60:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;13376:12;13390:23;13417:6;-1:-1:-1;;;;;13417:11:0;13437:5;13445:4;13417:33;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;;13417:33:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;13375:75;;;;13468:52;13486:7;13495:10;13507:12;13468:17;:52::i;:::-;13461:59;12998:530;-1:-1:-1;;;;;;;12998:530:0:o;9028:422::-;9395:20;9434:8;;;9028:422::o;15538:742::-;15653:12;15682:7;15678:595;;;-1:-1:-1;15713:10:0;15706:17;;15678:595;15827:17;;:21;15823:439;;16090:10;16084:17;16151:15;16138:10;16134:2;16130:19;16123:44;16038:148;16226:20;;-1:-1:-1;;;16226:20:0;;;;;;;;;;;;;;;;;16233:12;;16226:20;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

ipfs://85eadc21ddcd96b3a960ed81408a1d87ab17810efa30300dab7b1057e87d54e2