Contract 0x0ecfbe26eed3bb00446dd372425db2b305d8643b

 

Contract Overview

Balance:
0 ETH

ETH Value:
$0.00

Token:
Txn Hash Method
Block
From
To
Value [Txn Fee]
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54Redeem Underlyin...266724542022-09-25 22:45:4570 days 18 hrs ago0x47f7ea0dd4418aa1cec00786f5c47623ac37ba42 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.00004912
0xb0766e31c8ad5eac0ab30dc6422f76adb7a2084c9e81e06f20753b9413cc99ffRedeem Underlyin...193742252022-08-04 13:33:53123 days 3 hrs ago0x7723c45fb37092ee65202db7a2fe562c5fe0ab48 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.00007156548 ETH
0x4f8ad8f98a063b5ba3b166f6f4e232402aa38cb07bb7deb9864e724a26abdcd9Mint118196422022-05-11 17:49:07207 days 23 hrs ago0x7723c45fb37092ee65202db7a2fe562c5fe0ab48 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000601870095 ETH
0x9af62a74c88eefcd05ab5ffca0cb0b4726d5b0e4dbaa464d68839902acff1425Redeem Underlyin...112582212022-05-05 15:06:48214 days 2 hrs ago0x74d99d3c146e5f412f955462c8cbefc623dcd12c IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000367856918 ETH
0xb1877df72322e73de9348b2a556b406ddb5488c4c44fc1669953673e030e9246Redeem Underlyin...109240762022-04-30 17:21:52218 days 23 hrs ago0x0f5de5b7a64bfa1570bee36a5e2c50485fe8efd1 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000350356479 ETH
0xdde9601540e752bab2f94082e39badcb2a6a75ee25c4c8bd1d3b510a35196504Redeem Underlyin...109185642022-04-30 15:49:32219 days 1 hr ago0xcba1a275e2d858ecffaf7a87f606f74b719a8a93 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000342024586 ETH
0x9972db7fe3aa6dbda138b4b9c87f6d0e7c309e63c54f06cf3f416c8eecfa2b0dMint109020732022-04-30 11:59:18219 days 5 hrs ago0x7723c45fb37092ee65202db7a2fe562c5fe0ab48 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000237368577 ETH
0xe5da8d9a77a4a75b6087cffd7905f61e902494e8d50491b1c13313af0b495139Redeem Underlyin...109016062022-04-30 11:50:39219 days 5 hrs ago0xcba1a275e2d858ecffaf7a87f606f74b719a8a93 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000320944081 ETH
0xc17c39ac5d9498e2404fd6871c7da5a8e0930481159bd4926819ab0f9bbc05c3Redeem Underlyin...109005212022-04-30 11:33:27219 days 5 hrs ago0xcba1a275e2d858ecffaf7a87f606f74b719a8a93 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000326664877 ETH
0xebe33fd1bfd4fe106ba146d21442c3c156a311c1fdebd0ba5f1c80f421f43170Redeem Underlyin...108304842022-04-29 14:24:29220 days 2 hrs ago0x6d1f7cab93cadc7e6de33b350bfd88415262460a IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000299224204 ETH
0x0d39b954856d189e496d9b12758aebe907c24cc7d2ecc243a7ce6704e2cd715dRedeem Underlyin...107763942022-04-29 0:04:09220 days 17 hrs ago0x2e8ffde281d9e57eaa0c901847cebba7620b25f5 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000300011071 ETH
0xf7ae30342264357721bcc161c8b43c82fa33e8a627381fa2267a3547d867e844Redeem Underlyin...106984762022-04-28 1:05:45221 days 16 hrs ago0xf8e7dd5e8249c06e8c0cb4da116aee6f8548fbf4 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000308321921 ETH
0x6d9e5b342134598362b15329086c319576a305f006159a16a4b4e0299be82556Redeem Underlyin...105653482022-04-26 7:01:36223 days 10 hrs ago0x6d1f7cab93cadc7e6de33b350bfd88415262460a IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000321706835 ETH
0xb463a513b0230178832d58521ab96c5bc5dd77ca28f297026659fdaa64f88828Mint105096722022-04-25 9:22:28224 days 7 hrs ago0xcba1a275e2d858ecffaf7a87f606f74b719a8a93 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000192000033 ETH
0x1901097512ea0986d8a20954aaa59713d233173e87afba08753ba2fb75728a98Mint102573282022-04-21 12:17:57228 days 5 hrs ago0x2e8ffde281d9e57eaa0c901847cebba7620b25f5 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000292289198 ETH
0x3794d05cd164860f23af805d9b98da610a97bb4f96d89b1b67d7e9d3462ae074Mint102569592022-04-21 12:10:24228 days 5 hrs ago0x2e8ffde281d9e57eaa0c901847cebba7620b25f5 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000292289198 ETH
0xea9104a69a8741277ae7c374713277a142cf4d96a485ab66c1813dfcb066ee5bMint102555722022-04-21 11:42:17228 days 5 hrs ago0x2e8ffde281d9e57eaa0c901847cebba7620b25f5 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000353971859 ETH
0x90b1489652a465a8476524587b21f31a1b278d2dea951ae92f8d9348876d8588Mint102365652022-04-21 5:39:52228 days 11 hrs ago0xf8e7dd5e8249c06e8c0cb4da116aee6f8548fbf4 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000309589125 ETH
0x0f30b0bc4730896a83a4b37b796683e7330bfa7d4ee0219f7c3548694aad1d0eMint102359552022-04-21 5:26:35228 days 11 hrs ago0xf8e7dd5e8249c06e8c0cb4da116aee6f8548fbf4 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.00031204064 ETH
0x87b1eb8f33f8a059cc39835101ac98856ee86d7cf405a4d6e021613e66ca38c7Redeem Underlyin...102232322022-04-21 1:12:08228 days 16 hrs ago0xcba1a275e2d858ecffaf7a87f606f74b719a8a93 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000361804734 ETH
0x79933ee3d36efe9bc0b930214c9714a535576f6401d5d480c96f316faa4870bfMint102224612022-04-21 0:55:40228 days 16 hrs ago0xf8e7dd5e8249c06e8c0cb4da116aee6f8548fbf4 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000342342782 ETH
0x59c26175220408b2aa78d5c0c1fc04645aae3b5aeb2c1acde702500547dba222Redeem Underlyin...102223212022-04-21 0:53:08228 days 16 hrs ago0xcba1a275e2d858ecffaf7a87f606f74b719a8a93 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000389292118 ETH
0x1db48364c2a56ae4e3785f87f9443bf27e81ace7f989f6d9301227dea8247791Redeem Underlyin...102221522022-04-21 0:50:22228 days 16 hrs ago0xcba1a275e2d858ecffaf7a87f606f74b719a8a93 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000388537077 ETH
0x0ef438a75287ac36d54a687d638650619742537ce55ea970467aac0ba9878347Mint102128052022-04-20 21:23:33228 days 19 hrs ago0xcba1a275e2d858ecffaf7a87f606f74b719a8a93 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.00028920462 ETH
0x52e35cecbe6e7697c4292d74a65743dd4f6c0ec28cf96e5b67121127230f7901Mint102117292022-04-20 20:59:11228 days 20 hrs ago0xcba1a275e2d858ecffaf7a87f606f74b719a8a93 IN 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH0.000288573965 ETH
[ Download CSV Export 
Latest 25 internal transaction
Parent Txn Hash Block From To Value
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0xc7d021bd813f3b4bb801a4361fbcf3703ed617160 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0xc7d021bd813f3b4bb801a4361fbcf3703ed617160 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643bOlympusDAO: gOHM Token0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643bOlympusDAO: gOHM Token0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x89971b89e346fc372641a1ae427add6a738df50d0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x4afb2b3dc111d091ca6c46c024d1d2f17bf477e10 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0xc7d021bd813f3b4bb801a4361fbcf3703ed617160 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x89971b89e346fc372641a1ae427add6a738df50d0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0xa7ac11110f13097a022a6a975bddc4a3ed6a23bd0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x89971b89e346fc372641a1ae427add6a738df50d0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x4afb2b3dc111d091ca6c46c024d1d2f17bf477e10 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0xc7d021bd813f3b4bb801a4361fbcf3703ed617160 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x89971b89e346fc372641a1ae427add6a738df50d0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x137a6bf7d4c866ffd430cdd0107de6c4828ce54d0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x89971b89e346fc372641a1ae427add6a738df50d0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x4afb2b3dc111d091ca6c46c024d1d2f17bf477e10 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0xc7d021bd813f3b4bb801a4361fbcf3703ed617160 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x89971b89e346fc372641a1ae427add6a738df50d0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x7d3c555ec7ca83b6aeb44f4badf431e9a612f28b0x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643bOlympusDAO: gOHM Token0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x89971b89e346fc372641a1ae427add6a738df50d0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x4afb2b3dc111d091ca6c46c024d1d2f17bf477e10 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b0xc7d021bd813f3b4bb801a4361fbcf3703ed617160 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0x0ecfbe26eed3bb00446dd372425db2b305d8643b 0x89971b89e346fc372641a1ae427add6a738df50d0 ETH
0xf0abd7b4fc57962624822171111ea51c24265f86e7043d1fe149134d3d065c54266724542022-09-25 22:45:4570 days 18 hrs ago 0xc7d021bd813f3b4bb801a4361fbcf3703ed617160x0ecfbe26eed3bb00446dd372425db2b305d8643b0 ETH
[ Download CSV Export 
Loading
This contract may be a proxy contract. Click on More Options and select Is this a proxy? to confirm and enable the "Read as Proxy" & "Write as Proxy" tabs.

Similar Match Source Code
Note: This contract matches the deployed ByteCode of the Source Code for Contract 0x718356a8ee2487f5e87c5790b56e6b1148150540

Contract Name:
CErc20Delegator

Compiler Version
v0.5.17+commit.d19bba13

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion, BSD-3-Clause license

Contract Source Code (Solidity Multiple files format)

File 1 of 28: CErc20Delegator.sol
pragma solidity ^0.5.16;

import "./CTokenInterfaces.sol";
import "./ComptrollerStorage.sol";

/**
 * @title Compound's CErc20Delegator Contract
 * @notice CTokens which wrap an EIP-20 underlying and delegate to an implementation
 * @author Compound
 */
contract CErc20Delegator is CDelegationStorage {
    /**
     * @notice Construct a new money market
     * @param underlying_ The address of the underlying asset
     * @param comptroller_ The address of the Comptroller
     * @param interestRateModel_ The address of the interest rate model
     * @param name_ ERC-20 name of this token
     * @param symbol_ ERC-20 symbol of this token
     * @param implementation_ The address of the implementation the contract delegates to
     * @param becomeImplementationData The encoded args for becomeImplementation
     */
    constructor(address underlying_,
                ComptrollerInterface comptroller_,
                InterestRateModel interestRateModel_,
                string memory name_,
                string memory symbol_,
                address implementation_,
                bytes memory becomeImplementationData,
                uint256 reserveFactorMantissa_,
                uint256 adminFeeMantissa_) public {
        // First delegate gets to initialize the delegator (i.e. storage contract)
        delegateTo(implementation_, abi.encodeWithSignature("initialize(address,address,address,string,string,uint256,uint256)",
                                                            underlying_,
                                                            comptroller_,
                                                            interestRateModel_,
                                                            name_,
                                                            symbol_,
                                                            reserveFactorMantissa_,
                                                            adminFeeMantissa_));

        // New implementations always get set via the settor (post-initialize)
        delegateTo(implementation_, abi.encodeWithSignature("_setImplementationSafe(address,bool,bytes)", implementation_, false, becomeImplementationData));
    }

    /**
     * @notice Internal method to delegate execution to another contract
     * @dev It returns to the external caller whatever the implementation returns or forwards reverts
     * @param callee The contract to delegatecall
     * @param data The raw data to delegatecall
     * @return The returned bytes from the delegatecall
     */
    function delegateTo(address callee, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returnData) = callee.delegatecall(data);
        assembly {
            if eq(success, 0) {
                revert(add(returnData, 0x20), returndatasize)
            }
        }
        return returnData;
    }

    /**
     * @notice Delegates execution to an implementation contract
     * @dev It returns to the external caller whatever the implementation returns or forwards reverts
     */
    function () external payable {
        // Cannot send value to CErc20Delegator
        require(msg.value == 0, "CErc20Delegator:fallback: cannot send value to fallback");

        // Check for automatic implementation
        delegateTo(implementation, abi.encodeWithSignature("_prepare()"));

        // delegate all other functions to current implementation
        (bool success, ) = implementation.delegatecall(msg.data);

        assembly {
            let free_mem_ptr := mload(0x40)
            returndatacopy(free_mem_ptr, 0, returndatasize)

            switch success
            case 0 { revert(free_mem_ptr, returndatasize) }
            default { return(free_mem_ptr, returndatasize) }
        }
    }
}

File 2 of 28: CarefulMath.sol
pragma solidity ^0.5.16;

/**
  * @title Careful Math
  * @author Compound
  * @notice Derived from OpenZeppelin's SafeMath library
  *         https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/math/SafeMath.sol
  */
contract CarefulMath {

    /**
     * @dev Possible error codes that we can return
     */
    enum MathError {
        NO_ERROR,
        DIVISION_BY_ZERO,
        INTEGER_OVERFLOW,
        INTEGER_UNDERFLOW
    }

    /**
    * @dev Multiplies two numbers, returns an error on overflow.
    */
    function mulUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (a == 0) {
            return (MathError.NO_ERROR, 0);
        }

        uint c = a * b;

        if (c / a != b) {
            return (MathError.INTEGER_OVERFLOW, 0);
        } else {
            return (MathError.NO_ERROR, c);
        }
    }

    /**
    * @dev Integer division of two numbers, truncating the quotient.
    */
    function divUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (b == 0) {
            return (MathError.DIVISION_BY_ZERO, 0);
        }

        return (MathError.NO_ERROR, a / b);
    }

    /**
    * @dev Subtracts two numbers, returns an error on overflow (i.e. if subtrahend is greater than minuend).
    */
    function subUInt(uint a, uint b) internal pure returns (MathError, uint) {
        if (b <= a) {
            return (MathError.NO_ERROR, a - b);
        } else {
            return (MathError.INTEGER_UNDERFLOW, 0);
        }
    }

    /**
    * @dev Adds two numbers, returns an error on overflow.
    */
    function addUInt(uint a, uint b) internal pure returns (MathError, uint) {
        uint c = a + b;

        if (c >= a) {
            return (MathError.NO_ERROR, c);
        } else {
            return (MathError.INTEGER_OVERFLOW, 0);
        }
    }

    /**
    * @dev add a and b and then subtract c
    */
    function addThenSubUInt(uint a, uint b, uint c) internal pure returns (MathError, uint) {
        (MathError err0, uint sum) = addUInt(a, b);

        if (err0 != MathError.NO_ERROR) {
            return (err0, 0);
        }

        return subUInt(sum, c);
    }
}

File 3 of 28: CErc20.sol
pragma solidity ^0.5.16;

import "./CToken.sol";

interface CompLike {
  function delegate(address delegatee) external;
}

/**
 * @title Compound's CErc20 Contract
 * @notice CTokens which wrap an EIP-20 underlying
 * @dev This contract should not to be deployed on its own; instead, deploy `CErc20Delegator` (proxy contract) and `CErc20Delegate` (logic/implementation contract).
 * @author Compound
 */
contract CErc20 is CToken, CErc20Interface {
    /**
     * @notice Initialize the new money market
     * @param underlying_ The address of the underlying asset
     * @param comptroller_ The address of the Comptroller
     * @param interestRateModel_ The address of the interest rate model
     * @param name_ ERC-20 name of this token
     * @param symbol_ ERC-20 symbol of this token
     */
    function initialize(address underlying_,
                        ComptrollerInterface comptroller_,
                        InterestRateModel interestRateModel_,
                        string memory name_,
                        string memory symbol_,
                        uint256 reserveFactorMantissa_,
                        uint256 adminFeeMantissa_) public {
        // CToken initialize does the bulk of the work
        uint256 initialExchangeRateMantissa_ = 0.2e18;
        uint8 decimals_ = EIP20Interface(underlying_).decimals();
        super.initialize(comptroller_, interestRateModel_, initialExchangeRateMantissa_, name_, symbol_, decimals_, reserveFactorMantissa_, adminFeeMantissa_);

        // Set underlying and sanity check it
        underlying = underlying_;
        EIP20Interface(underlying).totalSupply();
    }

    /*** User Interface ***/

    /**
     * @notice Sender supplies assets into the market and receives cTokens in exchange
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param mintAmount The amount of the underlying asset to supply
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function mint(uint mintAmount) external returns (uint) {
        (uint err,) = mintInternal(mintAmount);
        return err;
    }

    /**
     * @notice Sender redeems cTokens in exchange for the underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemTokens The number of cTokens to redeem into underlying
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeem(uint redeemTokens) external returns (uint) {
        return redeemInternal(redeemTokens);
    }

    /**
     * @notice Sender redeems cTokens in exchange for a specified amount of underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemAmount The amount of underlying to redeem
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemUnderlying(uint redeemAmount) external returns (uint) {
        return redeemUnderlyingInternal(redeemAmount);
    }

    /**
      * @notice Sender borrows assets from the protocol to their own address
      * @param borrowAmount The amount of the underlying asset to borrow
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function borrow(uint borrowAmount) external returns (uint) {
        return borrowInternal(borrowAmount);
    }

    /**
     * @notice Sender repays their own borrow
     * @param repayAmount The amount to repay
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrow(uint repayAmount) external returns (uint) {
        (uint err,) = repayBorrowInternal(repayAmount);
        return err;
    }

    /**
     * @notice Sender repays a borrow belonging to borrower
     * @param borrower the account with the debt being payed off
     * @param repayAmount The amount to repay
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint) {
        (uint err,) = repayBorrowBehalfInternal(borrower, repayAmount);
        return err;
    }

    /**
     * @notice The sender liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this cToken to be liquidated
     * @param repayAmount The amount of the underlying borrowed asset to repay
     * @param cTokenCollateral The market in which to seize collateral from the borrower
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function liquidateBorrow(address borrower, uint repayAmount, CTokenInterface cTokenCollateral) external returns (uint) {
        (uint err,) = liquidateBorrowInternal(borrower, repayAmount, cTokenCollateral);
        return err;
    }

    /*** Safe Token ***/

    /**
     * @notice Gets balance of this contract in terms of the underlying
     * @dev This excludes the value of the current message, if any
     * @return The quantity of underlying tokens owned by this contract
     */
    function getCashPrior() internal view returns (uint) {
        EIP20Interface token = EIP20Interface(underlying);
        return token.balanceOf(address(this));
    }

    /**
     * @dev Similar to EIP20 transfer, except it handles a False result from `transferFrom` and reverts in that case.
     *      This will revert due to insufficient balance or insufficient allowance.
     *      This function returns the actual amount received,
     *      which may be less than `amount` if there is a fee attached to the transfer.
     *
     *      Note: This wrapper safely handles non-standard ERC-20 tokens that do not return a value.
     *            See here: https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
     */
    function doTransferIn(address from, uint amount) internal returns (uint) {
        uint balanceBefore = EIP20Interface(underlying).balanceOf(address(this));
        _callOptionalReturn(abi.encodeWithSelector(EIP20NonStandardInterface(underlying).transferFrom.selector, from, address(this), amount), "TOKEN_TRANSFER_IN_FAILED");

        // Calculate the amount that was *actually* transferred
        uint balanceAfter = EIP20Interface(underlying).balanceOf(address(this));
        require(balanceAfter >= balanceBefore, "TOKEN_TRANSFER_IN_OVERFLOW");
        return balanceAfter - balanceBefore;   // underflow already checked above, just subtract
    }

    /**
     * @dev Similar to EIP20 transfer, except it handles a False success from `transfer` and returns an explanatory
     *      error code rather than reverting. If caller has not called checked protocol's balance, this may revert due to
     *      insufficient cash held in this contract. If caller has checked protocol's balance prior to this call, and verified
     *      it is >= amount, this should not revert in normal conditions.
     *
     *      Note: This wrapper safely handles non-standard ERC-20 tokens that do not return a value.
     *            See here: https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
     */
    function doTransferOut(address payable to, uint amount) internal {
        _callOptionalReturn(abi.encodeWithSelector(EIP20NonStandardInterface(underlying).transfer.selector, to, amount), "TOKEN_TRANSFER_OUT_FAILED");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param data The call data (encoded using abi.encode or one of its variants).
     * @param errorMessage The revert string to return on failure.
     */
    function _callOptionalReturn(bytes memory data, string memory errorMessage) internal {
        bytes memory returndata = _functionCall(underlying, data, errorMessage);
        if (returndata.length > 0) require(abi.decode(returndata, (bool)), errorMessage);
    }

    /**
    * @notice Admin call to delegate the votes of the COMP-like underlying
    * @param compLikeDelegatee The address to delegate votes to
    * @dev CTokens whose underlying are not CompLike should revert here
    */
    function _delegateCompLikeTo(address compLikeDelegatee) external {
        require(hasAdminRights(), "only the admin may set the comp-like delegate");
        CompLike(underlying).delegate(compLikeDelegatee);
    }
}

File 4 of 28: CErc20Delegate.sol
pragma solidity ^0.5.16;

import "./CErc20.sol";

/**
 * @title Compound's CErc20Delegate Contract
 * @notice CTokens which wrap an EIP-20 underlying and are delegated to
 * @author Compound
 */
contract CErc20Delegate is CDelegateInterface, CErc20 {
    /**
     * @notice Construct an empty delegate
     */
    constructor() public {}

    /**
     * @notice Called by the delegator on a delegate to initialize it for duty
     * @param data The encoded bytes data for any initialization
     */
    function _becomeImplementation(bytes calldata data) external {
        // Shh -- currently unused
        data;

        // Shh -- we don't ever want this hook to be marked pure
        if (false) {
            implementation = address(0);
        }

        require(msg.sender == address(this) || hasAdminRights(), "!self");

        // Make sure admin storage is set up correctly
        __admin = address(0);
        __adminHasRights = false;
        __fuseAdminHasRights = false;
    }

    /**
     * @notice Called by the delegator on a delegate to forfeit its responsibility
     */
    function _resignImplementation() internal {
        // Shh -- we don't ever want this hook to be marked pure
        if (false) {
            implementation = address(0);
        }
    }

    /**
     * @dev Internal function to update the implementation of the delegator
     * @param implementation_ The address of the new implementation for delegation
     * @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
     * @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
     */
    function _setImplementationInternal(address implementation_, bool allowResign, bytes memory becomeImplementationData) internal {
        // Check whitelist
        require(fuseAdmin.cErc20DelegateWhitelist(implementation, implementation_, allowResign), "!impl");

        // Call _resignImplementation internally (this delegate's code)
        if (allowResign) _resignImplementation();

        // Get old implementation
        address oldImplementation = implementation;

        // Store new implementation
        implementation = implementation_;

        // Call _becomeImplementation externally (delegating to new delegate's code)
        _functionCall(address(this), abi.encodeWithSignature("_becomeImplementation(bytes)", becomeImplementationData), "!become");

        // Emit event
        emit NewImplementation(oldImplementation, implementation);
    }

    /**
     * @notice Called by the admin to update the implementation of the delegator
     * @param implementation_ The address of the new implementation for delegation
     * @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
     * @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
     */
    function _setImplementationSafe(address implementation_, bool allowResign, bytes calldata becomeImplementationData) external {
        // Check admin rights
        require(hasAdminRights(), "!admin");

        // Set implementation
        _setImplementationInternal(implementation_, allowResign, becomeImplementationData);
    }

    /**
     * @notice Function called before all delegator functions
     * @dev Checks comptroller.autoImplementation and upgrades the implementation if necessary
     */
    function _prepare() external payable {
        if (msg.sender != address(this) && ComptrollerV3Storage(address(comptroller)).autoImplementation()) {
            (address latestCErc20Delegate, bool allowResign, bytes memory becomeImplementationData) = fuseAdmin.latestCErc20Delegate(implementation);
            if (implementation != latestCErc20Delegate) _setImplementationInternal(latestCErc20Delegate, allowResign, becomeImplementationData);
        }
    }
}

File 5 of 28: CEther.sol
pragma solidity ^0.5.16;

import "./CToken.sol";

/**
 * @title Compound's CEther Contract
 * @notice CToken which wraps Ether
 * @dev This contract should not to be deployed on its own; instead, deploy `CEtherDelegator` (proxy contract) and `CEtherDelegate` (logic/implementation contract).
 * @author Compound
 */
contract CEther is CToken, CEtherInterface {
    /**
     * @notice Initialize the new money market
     * @param comptroller_ The address of the Comptroller
     * @param interestRateModel_ The address of the interest rate model
     * @param name_ ERC-20 name of this token
     * @param symbol_ ERC-20 symbol of this token
     */
    function initialize(ComptrollerInterface comptroller_,
                        InterestRateModel interestRateModel_,
                        string memory name_,
                        string memory symbol_,
                        uint256 reserveFactorMantissa_,
                        uint256 adminFeeMantissa_) public {
        // CToken initialize does the bulk of the work
        uint256 initialExchangeRateMantissa_ = 0.2e18;
        uint8 decimals_ = 18;
        super.initialize(comptroller_, interestRateModel_, initialExchangeRateMantissa_, name_, symbol_, decimals_, reserveFactorMantissa_, adminFeeMantissa_);
    }

    /*** User Interface ***/

    /**
     * @notice Sender supplies assets into the market and receives cTokens in exchange
     * @dev Reverts upon any failure
     */
    function mint() external payable {
        (uint err,) = mintInternal(msg.value);
        requireNoError(err, "mint failed");
    }

    /**
     * @notice Sender redeems cTokens in exchange for the underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemTokens The number of cTokens to redeem into underlying
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeem(uint redeemTokens) external returns (uint) {
        return redeemInternal(redeemTokens);
    }

    /**
     * @notice Sender redeems cTokens in exchange for a specified amount of underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemAmount The amount of underlying to redeem
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemUnderlying(uint redeemAmount) external returns (uint) {
        return redeemUnderlyingInternal(redeemAmount);
    }

    /**
      * @notice Sender borrows assets from the protocol to their own address
      * @param borrowAmount The amount of the underlying asset to borrow
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function borrow(uint borrowAmount) external returns (uint) {
        return borrowInternal(borrowAmount);
    }

    /**
     * @notice Sender repays their own borrow
     * @dev Reverts upon any failure
     */
    function repayBorrow() external payable {
        (uint err,) = repayBorrowInternal(msg.value);
        requireNoError(err, "repayBorrow failed");
    }

    /**
     * @notice Sender repays a borrow belonging to borrower
     * @dev Reverts upon any failure
     * @param borrower the account with the debt being payed off
     */
    function repayBorrowBehalf(address borrower) external payable {
        (uint err,) = repayBorrowBehalfInternal(borrower, msg.value);
        requireNoError(err, "repayBorrowBehalf failed");
    }

    /**
     * @notice The sender liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @dev Reverts upon any failure
     * @param borrower The borrower of this cToken to be liquidated
     * @param cTokenCollateral The market in which to seize collateral from the borrower
     */
    function liquidateBorrow(address borrower, CToken cTokenCollateral) external payable {
        (uint err,) = liquidateBorrowInternal(borrower, msg.value, cTokenCollateral);
        requireNoError(err, "liquidateBorrow failed");
    }

    /**
     * @notice Send Ether to CEther to mint
     */
    function () external payable {
        (uint err,) = mintInternal(msg.value);
        requireNoError(err, "mint failed");
    }

    /*** Safe Token ***/

    /**
     * @notice Gets balance of this contract in terms of Ether, before this message
     * @dev This excludes the value of the current message, if any
     * @return The quantity of Ether owned by this contract
     */
    function getCashPrior() internal view returns (uint) {
        (MathError err, uint startingBalance) = subUInt(address(this).balance, msg.value);
        require(err == MathError.NO_ERROR);
        return startingBalance;
    }

    /**
     * @notice Perform the actual transfer in, which is a no-op
     * @param from Address sending the Ether
     * @param amount Amount of Ether being sent
     * @return The actual amount of Ether transferred
     */
    function doTransferIn(address from, uint amount) internal returns (uint) {
        // Sanity checks
        require(msg.sender == from, "sender mismatch");
        require(msg.value == amount, "value mismatch");
        return amount;
    }

    function doTransferOut(address payable to, uint amount) internal {
        // Send the Ether and revert on failure
        (bool success, ) = to.call.value(amount)("");
        require(success, "doTransferOut failed");
    }

    function requireNoError(uint errCode, string memory message) internal pure {
        if (errCode == uint(Error.NO_ERROR)) {
            return;
        }

        bytes memory fullMessage = new bytes(bytes(message).length + 7);
        uint i;

        for (i = 0; i < bytes(message).length; i++) {
            fullMessage[i] = bytes(message)[i];
        }

        fullMessage[i+0] = byte(uint8(32));
        fullMessage[i+1] = byte(uint8(40));
        fullMessage[i+2] = byte(uint8(48 + ( errCode / 1000 )));
        fullMessage[i+3] = byte(uint8(48 + ( errCode / 100 % 10 )));
        fullMessage[i+4] = byte(uint8(48 + ( errCode / 10 % 10 )));
        fullMessage[i+5] = byte(uint8(48 + ( errCode % 10 )));
        fullMessage[i+6] = byte(uint8(41));

        require(errCode == uint(Error.NO_ERROR), string(fullMessage));
    }
}

File 6 of 28: CEtherDelegate.sol
pragma solidity ^0.5.16;

import "./CEther.sol";

/**
 * @title Compound's CEtherDelegate Contract
 * @notice CTokens which wrap Ether and are delegated to
 * @author Compound
 */
contract CEtherDelegate is CDelegateInterface, CEther {
    /**
     * @notice Construct an empty delegate
     */
    constructor() public {}

    /**
     * @notice Called by the delegator on a delegate to initialize it for duty
     * @param data The encoded bytes data for any initialization
     */
    function _becomeImplementation(bytes calldata data) external {
        // Shh -- currently unused
        data;

        // Shh -- we don't ever want this hook to be marked pure
        if (false) {
            implementation = address(0);
        }

        require(msg.sender == address(this) || hasAdminRights(), "!self");

        // Make sure admin storage is set up correctly
        __admin = address(0);
        __adminHasRights = false;
        __fuseAdminHasRights = false;
    }

    /**
     * @notice Called by the delegator on a delegate to forfeit its responsibility
     */
    function _resignImplementation() internal {
        // Shh -- we don't ever want this hook to be marked pure
        if (false) {
            implementation = address(0);
        }
    }

    /**
     * @dev Internal function to update the implementation of the delegator
     * @param implementation_ The address of the new implementation for delegation
     * @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
     * @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
     */
    function _setImplementationInternal(address implementation_, bool allowResign, bytes memory becomeImplementationData) internal {
        // Check whitelist
        require(fuseAdmin.cEtherDelegateWhitelist(implementation, implementation_, allowResign), "!impl");

        // Call _resignImplementation internally (this delegate's code)
        if (allowResign) _resignImplementation();

        // Get old implementation
        address oldImplementation = implementation;

        // Store new implementation
        implementation = implementation_;

        // Call _becomeImplementation externally (delegating to new delegate's code)
        _functionCall(address(this), abi.encodeWithSignature("_becomeImplementation(bytes)", becomeImplementationData), "!become");

        // Emit event
        emit NewImplementation(oldImplementation, implementation);
    }

    /**
     * @notice Called by the admin to update the implementation of the delegator
     * @param implementation_ The address of the new implementation for delegation
     * @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
     * @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
     */
    function _setImplementationSafe(address implementation_, bool allowResign, bytes calldata becomeImplementationData) external {
        // Check admin rights
        require(hasAdminRights(), "!admin");

        // Set implementation
        _setImplementationInternal(implementation_, allowResign, becomeImplementationData);
    }

    /**
     * @notice Function called before all delegator functions
     * @dev Checks comptroller.autoImplementation and upgrades the implementation if necessary
     */
    function _prepare() external payable {
        if (msg.sender != address(this) && ComptrollerV3Storage(address(comptroller)).autoImplementation()) {
            (address latestCEtherDelegate, bool allowResign, bytes memory becomeImplementationData) = fuseAdmin.latestCEtherDelegate(implementation);
            if (implementation != latestCEtherDelegate) _setImplementationInternal(latestCEtherDelegate, allowResign, becomeImplementationData);
        }
    }
}

File 7 of 28: CEtherDelegator.sol
pragma solidity ^0.5.16;

import "./CTokenInterfaces.sol";
import "./ComptrollerStorage.sol";

/**
 * @title Compound's CEtherDelegator Contract
 * @notice CTokens which wrap Ether and delegate to an implementation
 * @author Compound
 */
contract CEtherDelegator is CDelegationStorage {
    /**
     * @notice Construct a new CEther money market
     * @param comptroller_ The address of the Comptroller
     * @param interestRateModel_ The address of the interest rate model
     * @param name_ ERC-20 name of this token
     * @param symbol_ ERC-20 symbol of this token
     * @param implementation_ The address of the implementation the contract delegates to
     * @param becomeImplementationData The encoded args for becomeImplementation
     */
    constructor(ComptrollerInterface comptroller_,
                InterestRateModel interestRateModel_,
                string memory name_,
                string memory symbol_,
                address implementation_,
                bytes memory becomeImplementationData,
                uint256 reserveFactorMantissa_,
                uint256 adminFeeMantissa_) public {
        // First delegate gets to initialize the delegator (i.e. storage contract)
        delegateTo(implementation_, abi.encodeWithSignature("initialize(address,address,string,string,uint256,uint256)",
                                                            comptroller_,
                                                            interestRateModel_,
                                                            name_,
                                                            symbol_,
                                                            reserveFactorMantissa_,
                                                            adminFeeMantissa_));

        // New implementations always get set via the settor (post-initialize)
        delegateTo(implementation_, abi.encodeWithSignature("_setImplementationSafe(address,bool,bytes)", implementation_, false, becomeImplementationData));
    }

    /**
     * @notice Internal method to delegate execution to another contract
     * @dev It returns to the external caller whatever the implementation returns or forwards reverts
     * @param callee The contract to delegatecall
     * @param data The raw data to delegatecall
     * @return The returned bytes from the delegatecall
     */
    function delegateTo(address callee, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returnData) = callee.delegatecall(data);
        assembly {
            if eq(success, 0) {
                revert(add(returnData, 0x20), returndatasize)
            }
        }
        return returnData;
    }

    /**
     * @notice Delegates execution to an implementation contract
     * @dev It returns to the external caller whatever the implementation returns or forwards reverts
     */
    function () external payable {
        // Check for automatic implementation
        delegateTo(implementation, abi.encodeWithSignature("_prepare()"));

        // delegate all other functions to current implementation
        (bool success, ) = implementation.delegatecall(msg.data);

        assembly {
            let free_mem_ptr := mload(0x40)
            returndatacopy(free_mem_ptr, 0, returndatasize)

            switch success
            case 0 { revert(free_mem_ptr, returndatasize) }
            default { return(free_mem_ptr, returndatasize) }
        }
    }
}

File 8 of 28: Comptroller.sol
pragma solidity ^0.5.16;

import "./CToken.sol";
import "./CErc20.sol";
import "./ErrorReporter.sol";
import "./Exponential.sol";
import "./PriceOracle.sol";
import "./ComptrollerInterface.sol";
import "./ComptrollerStorage.sol";
import "./Unitroller.sol";
import "./RewardsDistributorDelegate.sol";

/**
 * @title Compound's Comptroller Contract
 * @author Compound
 * @dev This contract should not to be deployed alone; instead, deploy `Unitroller` (proxy contract) on top of this `Comptroller` (logic/implementation contract).
 */
contract Comptroller is ComptrollerV3Storage, ComptrollerInterface, ComptrollerErrorReporter, Exponential {
    /// @notice Emitted when an admin supports a market
    event MarketListed(CToken cToken);

    /// @notice Emitted when an admin unsupports a market
    event MarketUnlisted(CToken cToken);

    /// @notice Emitted when an account enters a market
    event MarketEntered(CToken cToken, address account);

    /// @notice Emitted when an account exits a market
    event MarketExited(CToken cToken, address account);

    /// @notice Emitted when close factor is changed by admin
    event NewCloseFactor(uint oldCloseFactorMantissa, uint newCloseFactorMantissa);

    /// @notice Emitted when a collateral factor is changed by admin
    event NewCollateralFactor(CToken cToken, uint oldCollateralFactorMantissa, uint newCollateralFactorMantissa);

    /// @notice Emitted when liquidation incentive is changed by admin
    event NewLiquidationIncentive(uint oldLiquidationIncentiveMantissa, uint newLiquidationIncentiveMantissa);

    /// @notice Emitted when price oracle is changed
    event NewPriceOracle(PriceOracle oldPriceOracle, PriceOracle newPriceOracle);

    /// @notice Emitted when pause guardian is changed
    event NewPauseGuardian(address oldPauseGuardian, address newPauseGuardian);

    /// @notice Emitted when an action is paused globally
    event ActionPaused(string action, bool pauseState);

    /// @notice Emitted when an action is paused on a market
    event ActionPaused(CToken cToken, string action, bool pauseState);

    /// @notice Emitted when the whitelist enforcement is changed
    event WhitelistEnforcementChanged(bool enforce);

    /// @notice Emitted when auto implementations are toggled
    event AutoImplementationsToggled(bool enabled);

    /// @notice Emitted when supply cap for a cToken is changed
    event NewSupplyCap(CToken indexed cToken, uint newSupplyCap);

    /// @notice Emitted when borrow cap for a cToken is changed
    event NewBorrowCap(CToken indexed cToken, uint newBorrowCap);

    /// @notice Emitted when borrow cap guardian is changed
    event NewBorrowCapGuardian(address oldBorrowCapGuardian, address newBorrowCapGuardian);

    /// @notice Emitted when a new RewardsDistributor contract is added to hooks
    event AddedRewardsDistributor(address rewardsDistributor);

    // closeFactorMantissa must be strictly greater than this value
    uint internal constant closeFactorMinMantissa = 0.05e18; // 0.05

    // closeFactorMantissa must not exceed this value
    uint internal constant closeFactorMaxMantissa = 0.9e18; // 0.9

    // No collateralFactorMantissa may exceed this value
    uint internal constant collateralFactorMaxMantissa = 0.9e18; // 0.9

    // liquidationIncentiveMantissa must be no less than this value
    uint internal constant liquidationIncentiveMinMantissa = 1.0e18; // 1.0

    // liquidationIncentiveMantissa must be no greater than this value
    uint internal constant liquidationIncentiveMaxMantissa = 1.5e18; // 1.5

    /*** Assets You Are In ***/

    /**
     * @notice Returns the assets an account has entered
     * @param account The address of the account to pull assets for
     * @return A dynamic list with the assets the account has entered
     */
    function getAssetsIn(address account) external view returns (CToken[] memory) {
        CToken[] memory assetsIn = accountAssets[account];

        return assetsIn;
    }

    /**
     * @notice Returns whether the given account is entered in the given asset
     * @param account The address of the account to check
     * @param cToken The cToken to check
     * @return True if the account is in the asset, otherwise false.
     */
    function checkMembership(address account, CToken cToken) external view returns (bool) {
        return markets[address(cToken)].accountMembership[account];
    }

    /**
     * @notice Add assets to be included in account liquidity calculation
     * @param cTokens The list of addresses of the cToken markets to be enabled
     * @return Success indicator for whether each corresponding market was entered
     */
    function enterMarkets(address[] memory cTokens) public returns (uint[] memory) {
        uint len = cTokens.length;

        uint[] memory results = new uint[](len);
        for (uint i = 0; i < len; i++) {
            CToken cToken = CToken(cTokens[i]);

            results[i] = uint(addToMarketInternal(cToken, msg.sender));
        }

        return results;
    }

    /**
     * @notice Add the market to the borrower's "assets in" for liquidity calculations
     * @param cToken The market to enter
     * @param borrower The address of the account to modify
     * @return Success indicator for whether the market was entered
     */
    function addToMarketInternal(CToken cToken, address borrower) internal returns (Error) {
        Market storage marketToJoin = markets[address(cToken)];

        if (!marketToJoin.isListed) {
            // market is not listed, cannot join
            return Error.MARKET_NOT_LISTED;
        }

        if (marketToJoin.accountMembership[borrower] == true) {
            // already joined
            return Error.NO_ERROR;
        }

        // survived the gauntlet, add to list
        // NOTE: we store these somewhat redundantly as a significant optimization
        //  this avoids having to iterate through the list for the most common use cases
        //  that is, only when we need to perform liquidity checks
        //  and not whenever we want to check if an account is in a particular market
        marketToJoin.accountMembership[borrower] = true;
        accountAssets[borrower].push(cToken);
        
        // Add to allBorrowers
        if (!borrowers[borrower]) {
            allBorrowers.push(borrower);
            borrowers[borrower] = true;
            borrowerIndexes[borrower] = allBorrowers.length - 1;
        }

        emit MarketEntered(cToken, borrower);

        return Error.NO_ERROR;
    }

    /**
     * @notice Removes asset from sender's account liquidity calculation
     * @dev Sender must not have an outstanding borrow balance in the asset,
     *  or be providing neccessary collateral for an outstanding borrow.
     * @param cTokenAddress The address of the asset to be removed
     * @return Whether or not the account successfully exited the market
     */
    function exitMarket(address cTokenAddress) external returns (uint) {
        CToken cToken = CToken(cTokenAddress);
        /* Get sender tokensHeld and amountOwed underlying from the cToken */
        (uint oErr, uint tokensHeld, uint amountOwed, ) = cToken.getAccountSnapshot(msg.sender);
        require(oErr == 0, "exitMarket: getAccountSnapshot failed"); // semi-opaque error code

        /* Fail if the sender has a borrow balance */
        if (amountOwed != 0) {
            return fail(Error.NONZERO_BORROW_BALANCE, FailureInfo.EXIT_MARKET_BALANCE_OWED);
        }

        /* Fail if the sender is not permitted to redeem all of their tokens */
        uint allowed = redeemAllowedInternal(cTokenAddress, msg.sender, tokensHeld);
        if (allowed != 0) {
            return failOpaque(Error.REJECTION, FailureInfo.EXIT_MARKET_REJECTION, allowed);
        }

        Market storage marketToExit = markets[address(cToken)];

        /* Return true if the sender is not already ‘in’ the market */
        if (!marketToExit.accountMembership[msg.sender]) {
            return uint(Error.NO_ERROR);
        }

        /* Set cToken account membership to false */
        delete marketToExit.accountMembership[msg.sender];

        /* Delete cToken from the account’s list of assets */
        // load into memory for faster iteration
        CToken[] memory userAssetList = accountAssets[msg.sender];
        uint len = userAssetList.length;
        uint assetIndex = len;
        for (uint i = 0; i < len; i++) {
            if (userAssetList[i] == cToken) {
                assetIndex = i;
                break;
            }
        }

        // We *must* have found the asset in the list or our redundant data structure is broken
        assert(assetIndex < len);

        // copy last item in list to location of item to be removed, reduce length by 1
        CToken[] storage storedList = accountAssets[msg.sender];
        storedList[assetIndex] = storedList[storedList.length - 1];
        storedList.length--;

        // If the user has exited all markets, remove them from the `allBorrowers` array
        if (storedList.length == 0) {
            uint256 borrowerIndex = borrowerIndexes[msg.sender];

            // If borrower not at the end of the borrower array, replace it with the item at the end of the borrower array
            if (borrowerIndex < allBorrowers.length - 1) {
                address lastElement = allBorrowers[allBorrowers.length - 1];
                allBorrowers[borrowerIndex] = lastElement; // Copy last item in list to location of item to be removed
                borrowerIndexes[lastElement] = borrowerIndex; // Set borrower index of moved item to correct index
            }

            // Remove the last element of the borrower array
            allBorrowers.length--; // Reduce length by 1
            borrowerIndexes[msg.sender] = 0; // Reset sender borrower index to 0 for a gas refund
            borrowers[msg.sender] = false; // Tell the contract that the sender is no longer a borrower (so it knows to add the borrower back if they enter a market in the future)
        }

        emit MarketExited(cToken, msg.sender);

        return uint(Error.NO_ERROR);
    }

    /*** Policy Hooks ***/

    /**
     * @notice Checks if the account should be allowed to mint tokens in the given market
     * @param cToken The market to verify the mint against
     * @param minter The account which would get the minted tokens
     * @param mintAmount The amount of underlying being supplied to the market in exchange for tokens
     * @return 0 if the mint is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
     */
    function mintAllowed(address cToken, address minter, uint mintAmount) external returns (uint) {
        // Pausing is a very serious situation - we revert to sound the alarms
        require(!mintGuardianPaused[cToken], "mint is paused");

        // Shh - currently unused
        minter;
        mintAmount;

        // Make sure market is listed
        if (!markets[cToken].isListed) {
            return uint(Error.MARKET_NOT_LISTED);
        }
        
        // Make sure minter is whitelisted
        if (enforceWhitelist && !whitelist[minter]) {
            return uint(Error.SUPPLIER_NOT_WHITELISTED);
        }

        // Check supply cap
        uint supplyCap = supplyCaps[cToken];
        // Supply cap of 0 corresponds to unlimited supplying
        if (supplyCap != 0) {
            uint totalCash = CToken(cToken).getCash();
            uint totalBorrows = CToken(cToken).totalBorrows();
            uint totalReserves = CToken(cToken).totalReserves();
            uint totalFuseFees = CToken(cToken).totalFuseFees();
            uint totalAdminFees = CToken(cToken).totalAdminFees();

            // totalUnderlyingSupply = totalCash + totalBorrows - (totalReserves + totalFuseFees + totalAdminFees)
            (MathError mathErr, uint totalUnderlyingSupply) = addThenSubUInt(totalCash, totalBorrows, add_(add_(totalReserves, totalFuseFees), totalAdminFees));
            if (mathErr != MathError.NO_ERROR) return uint(Error.MATH_ERROR);

            uint nextTotalUnderlyingSupply;
            (mathErr, nextTotalUnderlyingSupply) = addUInt(totalUnderlyingSupply, mintAmount);
            if (mathErr != MathError.NO_ERROR) return uint(Error.MATH_ERROR);

            require(nextTotalUnderlyingSupply < supplyCap, "market supply cap reached");
        }

        // Keep the flywheel moving
        flywheelPreSupplierAction(cToken, minter);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Validates mint and reverts on rejection. May emit logs.
     * @param cToken Asset being minted
     * @param minter The address minting the tokens
     * @param actualMintAmount The amount of the underlying asset being minted
     * @param mintTokens The number of tokens being minted
     */
    function mintVerify(address cToken, address minter, uint actualMintAmount, uint mintTokens) external {
        // Shh - currently unused
        cToken;
        minter;
        actualMintAmount;
        mintTokens;

        // Shh - we don't ever want this hook to be marked pure
        if (false) {
            maxAssets = maxAssets;
        }

        // Add minter to suppliers mapping
        suppliers[minter] = true;
    }

    /**
     * @notice Checks if the account should be allowed to redeem tokens in the given market
     * @param cToken The market to verify the redeem against
     * @param redeemer The account which would redeem the tokens
     * @param redeemTokens The number of cTokens to exchange for the underlying asset in the market
     * @return 0 if the redeem is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
     */
    function redeemAllowed(address cToken, address redeemer, uint redeemTokens) external returns (uint) {
        uint allowed = redeemAllowedInternal(cToken, redeemer, redeemTokens);
        if (allowed != uint(Error.NO_ERROR)) {
            return allowed;
        }

        // Keep the flywheel moving
        flywheelPreSupplierAction(cToken, redeemer);

        return uint(Error.NO_ERROR);
    }

    function redeemAllowedInternal(address cToken, address redeemer, uint redeemTokens) internal view returns (uint) {
        if (!markets[cToken].isListed) {
            return uint(Error.MARKET_NOT_LISTED);
        }

        /* If the redeemer is not 'in' the market, then we can bypass the liquidity check */
        if (!markets[cToken].accountMembership[redeemer]) {
            return uint(Error.NO_ERROR);
        }

        /* Otherwise, perform a hypothetical liquidity check to guard against shortfall */
        (Error err, , uint shortfall) = getHypotheticalAccountLiquidityInternal(redeemer, CToken(cToken), redeemTokens, 0);
        if (err != Error.NO_ERROR) {
            return uint(err);
        }
        if (shortfall > 0) {
            return uint(Error.INSUFFICIENT_LIQUIDITY);
        }

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Validates redeem and reverts on rejection. May emit logs.
     * @param cToken Asset being redeemed
     * @param redeemer The address redeeming the tokens
     * @param redeemAmount The amount of the underlying asset being redeemed
     * @param redeemTokens The number of tokens being redeemed
     */
    function redeemVerify(address cToken, address redeemer, uint redeemAmount, uint redeemTokens) external {
        // Shh - currently unused
        cToken;
        redeemer;

        // Require tokens is zero or amount is also zero
        if (redeemTokens == 0 && redeemAmount > 0) {
            revert("redeemTokens zero");
        }
    }

    /**
     * @notice Checks if the account should be allowed to borrow the underlying asset of the given market
     * @param cToken The market to verify the borrow against
     * @param borrower The account which would borrow the asset
     * @param borrowAmount The amount of underlying the account would borrow
     * @return 0 if the borrow is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
     */
    function borrowAllowed(address cToken, address borrower, uint borrowAmount) external returns (uint) {
        // Pausing is a very serious situation - we revert to sound the alarms
        require(!borrowGuardianPaused[cToken], "borrow is paused");

        // Make sure market is listed
        if (!markets[cToken].isListed) {
            return uint(Error.MARKET_NOT_LISTED);
        }

        if (!markets[cToken].accountMembership[borrower]) {
            // only cTokens may call borrowAllowed if borrower not in market
            require(msg.sender == cToken, "sender must be cToken");

            // attempt to add borrower to the market
            Error err = addToMarketInternal(CToken(msg.sender), borrower);
            if (err != Error.NO_ERROR) {
                return uint(err);
            }

            // it should be impossible to break the important invariant
            assert(markets[cToken].accountMembership[borrower]);
        }

        // Make sure oracle price is available
        if (oracle.getUnderlyingPrice(CToken(cToken)) == 0) {
            return uint(Error.PRICE_ERROR);
        }
        
        // Make sure borrower is whitelisted
        if (enforceWhitelist && !whitelist[borrower]) {
            return uint(Error.SUPPLIER_NOT_WHITELISTED);
        }

        // Check borrow cap
        uint borrowCap = borrowCaps[cToken];
        // Borrow cap of 0 corresponds to unlimited borrowing
        if (borrowCap != 0) {
            uint totalBorrows = CToken(cToken).totalBorrows();
            (MathError mathErr, uint nextTotalBorrows) = addUInt(totalBorrows, borrowAmount);
            if (mathErr != MathError.NO_ERROR) return uint(Error.MATH_ERROR);
            require(nextTotalBorrows < borrowCap, "market borrow cap reached");
        }

        // Keep the flywheel moving
        flywheelPreBorrowerAction(cToken, borrower);

        // Perform a hypothetical liquidity check to guard against shortfall
        (Error err, , uint shortfall) = getHypotheticalAccountLiquidityInternal(borrower, CToken(cToken), 0, borrowAmount);
        if (err != Error.NO_ERROR) {
            return uint(err);
        }
        if (shortfall > 0) {
            return uint(Error.INSUFFICIENT_LIQUIDITY);
        }

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Checks if the account should be allowed to borrow the underlying asset of the given market
     * @param cToken Asset whose underlying is being borrowed
     * @param accountBorrowsNew The user's new borrow balance of the underlying asset
     */
    function borrowWithinLimits(address cToken, uint accountBorrowsNew) external returns (uint) {
        // Check if min borrow exists
        uint minBorrowEth = fuseAdmin.minBorrowEth();

        if (minBorrowEth > 0) {
            // Get new underlying borrow balance of account for this cToken
            uint oraclePriceMantissa = oracle.getUnderlyingPrice(CToken(cToken));
            if (oraclePriceMantissa == 0) return uint(Error.PRICE_ERROR);
            (MathError mathErr, uint borrowBalanceEth) = mulScalarTruncate(Exp({mantissa: oraclePriceMantissa}), accountBorrowsNew);
            if (mathErr != MathError.NO_ERROR) return uint(Error.MATH_ERROR);

            // Check against min borrow
            if (borrowBalanceEth < minBorrowEth) return uint(Error.BORROW_BELOW_MIN);
        }

        // Return no error
        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Checks if the account should be allowed to borrow the underlying asset of the given market
     * @param cToken Asset whose underlying is being borrowed
     * @param exchangeRateMantissa Underlying/cToken exchange rate
     * @param accountTokens Initial account cToken balance
     * @param accountTokens Underlying amount to mint
     */
    function mintWithinLimits(address cToken, uint exchangeRateMantissa, uint accountTokens, uint mintAmount) external returns (uint) {
        // Return no error
        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Validates borrow and reverts on rejection. May emit logs.
     * @param cToken Asset whose underlying is being borrowed
     * @param borrower The address borrowing the underlying
     * @param borrowAmount The amount of the underlying asset requested to borrow
     */
    function borrowVerify(address cToken, address borrower, uint borrowAmount) external {
        // Shh - currently unused
        cToken;
        borrower;
        borrowAmount;

        // Shh - we don't ever want this hook to be marked pure
        if (false) {
            maxAssets = maxAssets;
        }
    }

    /**
     * @notice Checks if the account should be allowed to repay a borrow in the given market
     * @param cToken The market to verify the repay against
     * @param payer The account which would repay the asset
     * @param borrower The account which would borrowed the asset
     * @param repayAmount The amount of the underlying asset the account would repay
     * @return 0 if the repay is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
     */
    function repayBorrowAllowed(
        address cToken,
        address payer,
        address borrower,
        uint repayAmount) external returns (uint) {
        // Shh - currently unused
        payer;
        borrower;
        repayAmount;

        // Make sure market is listed
        if (!markets[cToken].isListed) {
            return uint(Error.MARKET_NOT_LISTED);
        }

        // Keep the flywheel moving
        flywheelPreBorrowerAction(cToken, borrower);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Validates repayBorrow and reverts on rejection. May emit logs.
     * @param cToken Asset being repaid
     * @param payer The address repaying the borrow
     * @param borrower The address of the borrower
     * @param actualRepayAmount The amount of underlying being repaid
     */
    function repayBorrowVerify(
        address cToken,
        address payer,
        address borrower,
        uint actualRepayAmount,
        uint borrowerIndex) external {
        // Shh - currently unused
        cToken;
        payer;
        borrower;
        actualRepayAmount;
        borrowerIndex;

        // Shh - we don't ever want this hook to be marked pure
        if (false) {
            maxAssets = maxAssets;
        }
    }

    /**
     * @notice Checks if the liquidation should be allowed to occur
     * @param cTokenBorrowed Asset which was borrowed by the borrower
     * @param cTokenCollateral Asset which was used as collateral and will be seized
     * @param liquidator The address repaying the borrow and seizing the collateral
     * @param borrower The address of the borrower
     * @param repayAmount The amount of underlying being repaid
     */
    function liquidateBorrowAllowed(
        address cTokenBorrowed,
        address cTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount) external returns (uint) {
        // Shh - currently unused
        liquidator;

        // Make sure markets are listed
        if (!markets[cTokenBorrowed].isListed || !markets[cTokenCollateral].isListed) {
            return uint(Error.MARKET_NOT_LISTED);
        }

        // Get borrowers's underlying borrow balance
        uint borrowBalance = CToken(cTokenBorrowed).borrowBalanceStored(borrower);

        /* allow accounts to be liquidated if the market is deprecated */
        if (isDeprecated(CToken(cTokenBorrowed))) {
            require(borrowBalance >= repayAmount, "Can not repay more than the total borrow");
        } else {
            /* The borrower must have shortfall in order to be liquidatable */
            (Error err, , uint shortfall) = getAccountLiquidityInternal(borrower);
            if (err != Error.NO_ERROR) {
                return uint(err);
            }

            if (shortfall == 0) {
                return uint(Error.INSUFFICIENT_SHORTFALL);
            }

            /* The liquidator may not repay more than what is allowed by the closeFactor */
            uint maxClose = mul_ScalarTruncate(Exp({mantissa: closeFactorMantissa}), borrowBalance);
            if (repayAmount > maxClose) {
                return uint(Error.TOO_MUCH_REPAY);
            }
        }

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Validates liquidateBorrow and reverts on rejection. May emit logs.
     * @param cTokenBorrowed Asset which was borrowed by the borrower
     * @param cTokenCollateral Asset which was used as collateral and will be seized
     * @param liquidator The address repaying the borrow and seizing the collateral
     * @param borrower The address of the borrower
     * @param actualRepayAmount The amount of underlying being repaid
     */
    function liquidateBorrowVerify(
        address cTokenBorrowed,
        address cTokenCollateral,
        address liquidator,
        address borrower,
        uint actualRepayAmount,
        uint seizeTokens) external {
        // Shh - currently unused
        cTokenBorrowed;
        cTokenCollateral;
        liquidator;
        borrower;
        actualRepayAmount;
        seizeTokens;

        // Shh - we don't ever want this hook to be marked pure
        if (false) {
            maxAssets = maxAssets;
        }
    }

    /**
     * @notice Checks if the seizing of assets should be allowed to occur
     * @param cTokenCollateral Asset which was used as collateral and will be seized
     * @param cTokenBorrowed Asset which was borrowed by the borrower
     * @param liquidator The address repaying the borrow and seizing the collateral
     * @param borrower The address of the borrower
     * @param seizeTokens The number of collateral tokens to seize
     */
    function seizeAllowed(
        address cTokenCollateral,
        address cTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external returns (uint) {
        // Pausing is a very serious situation - we revert to sound the alarms
        require(!seizeGuardianPaused, "seize is paused");

        // Shh - currently unused
        liquidator;
        borrower;
        seizeTokens;

        // Make sure markets are listed
        if (!markets[cTokenCollateral].isListed || !markets[cTokenBorrowed].isListed) {
            return uint(Error.MARKET_NOT_LISTED);
        }

        // Make sure cToken Comptrollers are identical
        if (CToken(cTokenCollateral).comptroller() != CToken(cTokenBorrowed).comptroller()) {
            return uint(Error.COMPTROLLER_MISMATCH);
        }

        // Keep the flywheel moving
        flywheelPreTransferAction(cTokenCollateral, borrower, liquidator);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Validates seize and reverts on rejection. May emit logs.
     * @param cTokenCollateral Asset which was used as collateral and will be seized
     * @param cTokenBorrowed Asset which was borrowed by the borrower
     * @param liquidator The address repaying the borrow and seizing the collateral
     * @param borrower The address of the borrower
     * @param seizeTokens The number of collateral tokens to seize
     */
    function seizeVerify(
        address cTokenCollateral,
        address cTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external {
        // Shh - currently unused
        cTokenCollateral;
        cTokenBorrowed;
        liquidator;
        borrower;
        seizeTokens;

        // Shh - we don't ever want this hook to be marked pure
        if (false) {
            maxAssets = maxAssets;
        }
    }

    /**
     * @notice Checks if the account should be allowed to transfer tokens in the given market
     * @param cToken The market to verify the transfer against
     * @param src The account which sources the tokens
     * @param dst The account which receives the tokens
     * @param transferTokens The number of cTokens to transfer
     * @return 0 if the transfer is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
     */
    function transferAllowed(address cToken, address src, address dst, uint transferTokens) external returns (uint) {
        // Pausing is a very serious situation - we revert to sound the alarms
        require(!transferGuardianPaused, "transfer is paused");

        // Currently the only consideration is whether or not
        //  the src is allowed to redeem this many tokens
        uint allowed = redeemAllowedInternal(cToken, src, transferTokens);
        if (allowed != uint(Error.NO_ERROR)) {
            return allowed;
        }

        // Keep the flywheel moving
        flywheelPreTransferAction(cToken, src, dst);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Validates transfer and reverts on rejection. May emit logs.
     * @param cToken Asset being transferred
     * @param src The account which sources the tokens
     * @param dst The account which receives the tokens
     * @param transferTokens The number of cTokens to transfer
     */
    function transferVerify(address cToken, address src, address dst, uint transferTokens) external {
        // Shh - currently unused
        cToken;
        src;
        dst;
        transferTokens;

        // Shh - we don't ever want this hook to be marked pure
        if (false) {
            maxAssets = maxAssets;
        }
    }

    /*** Flywheel Hooks ***/

    /**
     * @notice Keeps the flywheel moving pre-mint and pre-redeem
     * @param cToken The relevant market
     * @param supplier The minter/redeemer
     */
    function flywheelPreSupplierAction(address cToken, address supplier) internal {
        for (uint256 i = 0; i < rewardsDistributors.length; i++) RewardsDistributorDelegate(rewardsDistributors[i]).flywheelPreSupplierAction(cToken, supplier);
    }

    /**
     * @notice Keeps the flywheel moving pre-borrow and pre-repay
     * @param cToken The relevant market
     * @param borrower The borrower
     */
    function flywheelPreBorrowerAction(address cToken, address borrower) internal {
        for (uint256 i = 0; i < rewardsDistributors.length; i++) RewardsDistributorDelegate(rewardsDistributors[i]).flywheelPreBorrowerAction(cToken, borrower);
    }

    /**
     * @notice Keeps the flywheel moving pre-transfer and pre-seize
     * @param cToken The relevant market
     * @param src The account which sources the tokens
     * @param dst The account which receives the tokens
     */
    function flywheelPreTransferAction(address cToken, address src, address dst) internal {
        for (uint256 i = 0; i < rewardsDistributors.length; i++) RewardsDistributorDelegate(rewardsDistributors[i]).flywheelPreTransferAction(cToken, src, dst);
    }

    /*** Liquidity/Liquidation Calculations ***/

    /**
     * @dev Local vars for avoiding stack-depth limits in calculating account liquidity.
     *  Note that `cTokenBalance` is the number of cTokens the account owns in the market,
     *  whereas `borrowBalance` is the amount of underlying that the account has borrowed.
     */
    struct AccountLiquidityLocalVars {
        uint sumCollateral;
        uint sumBorrowPlusEffects;
        uint cTokenBalance;
        uint borrowBalance;
        uint exchangeRateMantissa;
        uint oraclePriceMantissa;
        Exp collateralFactor;
        Exp exchangeRate;
        Exp oraclePrice;
        Exp tokensToDenom;
    }

    /**
     * @notice Determine the current account liquidity wrt collateral requirements
     * @return (possible error code (semi-opaque),
                account liquidity in excess of collateral requirements,
     *          account shortfall below collateral requirements)
     */
    function getAccountLiquidity(address account) public view returns (uint, uint, uint) {
        (Error err, uint liquidity, uint shortfall) = getHypotheticalAccountLiquidityInternal(account, CToken(0), 0, 0);

        return (uint(err), liquidity, shortfall);
    }

    /**
     * @notice Determine the current account liquidity wrt collateral requirements
     * @return (possible error code,
                account liquidity in excess of collateral requirements,
     *          account shortfall below collateral requirements)
     */
    function getAccountLiquidityInternal(address account) internal view returns (Error, uint, uint) {
        return getHypotheticalAccountLiquidityInternal(account, CToken(0), 0, 0);
    }

    /**
     * @notice Determine what the account liquidity would be if the given amounts were redeemed/borrowed
     * @param cTokenModify The market to hypothetically redeem/borrow in
     * @param account The account to determine liquidity for
     * @param redeemTokens The number of tokens to hypothetically redeem
     * @param borrowAmount The amount of underlying to hypothetically borrow
     * @return (possible error code (semi-opaque),
                hypothetical account liquidity in excess of collateral requirements,
     *          hypothetical account shortfall below collateral requirements)
     */
    function getHypotheticalAccountLiquidity(
        address account,
        address cTokenModify,
        uint redeemTokens,
        uint borrowAmount) public view returns (uint, uint, uint) {
        (Error err, uint liquidity, uint shortfall) = getHypotheticalAccountLiquidityInternal(account, CToken(cTokenModify), redeemTokens, borrowAmount);
        return (uint(err), liquidity, shortfall);
    }

    /**
     * @notice Determine what the account liquidity would be if the given amounts were redeemed/borrowed
     * @param cTokenModify The market to hypothetically redeem/borrow in
     * @param account The account to determine liquidity for
     * @param redeemTokens The number of tokens to hypothetically redeem
     * @param borrowAmount The amount of underlying to hypothetically borrow
     * @dev Note that we calculate the exchangeRateStored for each collateral cToken using stored data,
     *  without calculating accumulated interest.
     * @return (possible error code,
                hypothetical account liquidity in excess of collateral requirements,
     *          hypothetical account shortfall below collateral requirements)
     */
    function getHypotheticalAccountLiquidityInternal(
        address account,
        CToken cTokenModify,
        uint redeemTokens,
        uint borrowAmount) internal view returns (Error, uint, uint) {

        AccountLiquidityLocalVars memory vars; // Holds all our calculation results
        uint oErr;

        // For each asset the account is in
        CToken[] memory assets = accountAssets[account];
        for (uint i = 0; i < assets.length; i++) {
            CToken asset = assets[i];

            // Read the balances and exchange rate from the cToken
            (oErr, vars.cTokenBalance, vars.borrowBalance, vars.exchangeRateMantissa) = asset.getAccountSnapshot(account);
            if (oErr != 0) { // semi-opaque error code, we assume NO_ERROR == 0 is invariant between upgrades
                return (Error.SNAPSHOT_ERROR, 0, 0);
            }
            vars.collateralFactor = Exp({mantissa: markets[address(asset)].collateralFactorMantissa});
            vars.exchangeRate = Exp({mantissa: vars.exchangeRateMantissa});

            // Get the normalized price of the asset
            vars.oraclePriceMantissa = oracle.getUnderlyingPrice(asset);
            if (vars.oraclePriceMantissa == 0) {
                return (Error.PRICE_ERROR, 0, 0);
            }
            vars.oraclePrice = Exp({mantissa: vars.oraclePriceMantissa});

            // Pre-compute a conversion factor from tokens -> ether (normalized price value)
            vars.tokensToDenom = mul_(mul_(vars.collateralFactor, vars.exchangeRate), vars.oraclePrice);

            // sumCollateral += tokensToDenom * cTokenBalance
            vars.sumCollateral = mul_ScalarTruncateAddUInt(vars.tokensToDenom, vars.cTokenBalance, vars.sumCollateral);

            // sumBorrowPlusEffects += oraclePrice * borrowBalance
            vars.sumBorrowPlusEffects = mul_ScalarTruncateAddUInt(vars.oraclePrice, vars.borrowBalance, vars.sumBorrowPlusEffects);

            // Calculate effects of interacting with cTokenModify
            if (asset == cTokenModify) {
                // redeem effect
                // sumBorrowPlusEffects += tokensToDenom * redeemTokens
                vars.sumBorrowPlusEffects = mul_ScalarTruncateAddUInt(vars.tokensToDenom, redeemTokens, vars.sumBorrowPlusEffects);

                // borrow effect
                // sumBorrowPlusEffects += oraclePrice * borrowAmount
                vars.sumBorrowPlusEffects = mul_ScalarTruncateAddUInt(vars.oraclePrice, borrowAmount, vars.sumBorrowPlusEffects);
            }
        }

        // These are safe, as the underflow condition is checked first
        if (vars.sumCollateral > vars.sumBorrowPlusEffects) {
            return (Error.NO_ERROR, vars.sumCollateral - vars.sumBorrowPlusEffects, 0);
        } else {
            return (Error.NO_ERROR, 0, vars.sumBorrowPlusEffects - vars.sumCollateral);
        }
    }

    /**
     * @notice Calculate number of tokens of collateral asset to seize given an underlying amount
     * @dev Used in liquidation (called in cToken.liquidateBorrowFresh)
     * @param cTokenBorrowed The address of the borrowed cToken
     * @param cTokenCollateral The address of the collateral cToken
     * @param actualRepayAmount The amount of cTokenBorrowed underlying to convert into cTokenCollateral tokens
     * @return (errorCode, number of cTokenCollateral tokens to be seized in a liquidation)
     */
    function liquidateCalculateSeizeTokens(address cTokenBorrowed, address cTokenCollateral, uint actualRepayAmount) external view returns (uint, uint) {
        /* Read oracle prices for borrowed and collateral markets */
        uint priceBorrowedMantissa = oracle.getUnderlyingPrice(CToken(cTokenBorrowed));
        uint priceCollateralMantissa = oracle.getUnderlyingPrice(CToken(cTokenCollateral));
        if (priceBorrowedMantissa == 0 || priceCollateralMantissa == 0) {
            return (uint(Error.PRICE_ERROR), 0);
        }

        /*
         * Get the exchange rate and calculate the number of collateral tokens to seize:
         *  seizeAmount = actualRepayAmount * liquidationIncentive * priceBorrowed / priceCollateral
         *  seizeTokens = seizeAmount / exchangeRate
         *   = actualRepayAmount * (liquidationIncentive * priceBorrowed) / (priceCollateral * exchangeRate)
         */
        uint exchangeRateMantissa = CToken(cTokenCollateral).exchangeRateStored(); // Note: reverts on error
        uint seizeTokens;
        Exp memory numerator;
        Exp memory denominator;
        Exp memory ratio;

        numerator = mul_(Exp({mantissa: liquidationIncentiveMantissa}), Exp({mantissa: priceBorrowedMantissa}));
        denominator = mul_(Exp({mantissa: priceCollateralMantissa}), Exp({mantissa: exchangeRateMantissa}));
        ratio = div_(numerator, denominator);

        seizeTokens = mul_ScalarTruncate(ratio, actualRepayAmount);

        return (uint(Error.NO_ERROR), seizeTokens);
    }

    /*** Admin Functions ***/

    /**
      * @notice Add a RewardsDistributor contracts.
      * @dev Admin function to add a RewardsDistributor contract
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _addRewardsDistributor(address distributor) external returns (uint) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.ADD_REWARDS_DISTRIBUTOR_OWNER_CHECK);
        }

        // Check marker method
        require(RewardsDistributorDelegate(distributor).isRewardsDistributor(), "marker method returned false");

        // Check for existing RewardsDistributor
        for (uint i = 0; i < rewardsDistributors.length; i++) require(distributor != rewardsDistributors[i], "RewardsDistributor contract already added");

        // Add RewardsDistributor to array
        rewardsDistributors.push(distributor);
        emit AddedRewardsDistributor(distributor);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Sets the whitelist enforcement for the comptroller
      * @dev Admin function to set a new whitelist enforcement boolean
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setWhitelistEnforcement(bool enforce) external returns (uint) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_WHITELIST_ENFORCEMENT_OWNER_CHECK);
        }

        // Check if `enforceWhitelist` already equals `enforce`
        if (enforceWhitelist == enforce) {
            return uint(Error.NO_ERROR);
        }

        // Set comptroller's `enforceWhitelist` to `enforce`
        enforceWhitelist = enforce;

        // Emit WhitelistEnforcementChanged(bool enforce);
        emit WhitelistEnforcementChanged(enforce);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Sets the whitelist `statuses` for `suppliers`
      * @dev Admin function to set the whitelist `statuses` for `suppliers`
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setWhitelistStatuses(address[] calldata suppliers, bool[] calldata statuses) external returns (uint) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_WHITELIST_STATUS_OWNER_CHECK);
        }

        // Set whitelist statuses for suppliers
        for (uint i = 0; i < suppliers.length; i++) {
            address supplier = suppliers[i];

            if (statuses[i]) {
                // If not already whitelisted, add to whitelist
                if (!whitelist[supplier]) {
                    whitelist[supplier] = true;
                    whitelistArray.push(supplier);
                    whitelistIndexes[supplier] = whitelistArray.length - 1;
                }
            } else {
                // If whitelisted, remove from whitelist
                if (whitelist[supplier]) {
                    uint256 supplierIndex = whitelistIndexes[supplier];

                    // If supplier not at the end of the whitelist array, replace it with the item at the end of the whitelist array
                    if (supplierIndex < whitelistArray.length - 1) {
                        address lastElement = whitelistArray[whitelistArray.length - 1];
                        whitelistArray[supplierIndex] = lastElement; // Copy last item in list to location of item to be removed
                        whitelistIndexes[lastElement] = supplierIndex; // Set whitelist index of moved item to correct index
                    }

                    // Remove the last element of the whitelist array
                    whitelistArray.length--; // Reduce length by 1
                    whitelistIndexes[supplier] = 0; // Reset supplier whitelist index to 0 for a gas refund
                    whitelist[supplier] = false; // Tell the contract that the supplier is no longer whitelisted
                }
            }
        }

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Sets a new price oracle for the comptroller
      * @dev Admin function to set a new price oracle
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setPriceOracle(PriceOracle newOracle) public returns (uint) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PRICE_ORACLE_OWNER_CHECK);
        }

        // Track the old oracle for the comptroller
        PriceOracle oldOracle = oracle;

        // Set comptroller's oracle to newOracle
        oracle = newOracle;

        // Emit NewPriceOracle(oldOracle, newOracle)
        emit NewPriceOracle(oldOracle, newOracle);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Sets the closeFactor used when liquidating borrows
      * @dev Admin function to set closeFactor
      * @param newCloseFactorMantissa New close factor, scaled by 1e18
      * @return uint 0=success, otherwise a failure. (See ErrorReporter for details)
      */
    function _setCloseFactor(uint newCloseFactorMantissa) external returns (uint256) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_CLOSE_FACTOR_OWNER_CHECK);
        }

        // Check limits
        Exp memory newCloseFactorExp = Exp({mantissa: newCloseFactorMantissa});
        Exp memory lowLimit = Exp({mantissa: closeFactorMinMantissa});
        if (lessThanOrEqualExp(newCloseFactorExp, lowLimit)) {
            return fail(Error.INVALID_CLOSE_FACTOR, FailureInfo.SET_CLOSE_FACTOR_VALIDATION);
        }

        Exp memory highLimit = Exp({mantissa: closeFactorMaxMantissa});
        if (lessThanExp(highLimit, newCloseFactorExp)) {
            return fail(Error.INVALID_CLOSE_FACTOR, FailureInfo.SET_CLOSE_FACTOR_VALIDATION);
        }

        // Set pool close factor to new close factor, remember old value
        uint oldCloseFactorMantissa = closeFactorMantissa;
        closeFactorMantissa = newCloseFactorMantissa;

        // Emit event
        emit NewCloseFactor(oldCloseFactorMantissa, closeFactorMantissa);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Sets the collateralFactor for a market
      * @dev Admin function to set per-market collateralFactor
      * @param cToken The market to set the factor on
      * @param newCollateralFactorMantissa The new collateral factor, scaled by 1e18
      * @return uint 0=success, otherwise a failure. (See ErrorReporter for details)
      */
    function _setCollateralFactor(CToken cToken, uint newCollateralFactorMantissa) public returns (uint256) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_COLLATERAL_FACTOR_OWNER_CHECK);
        }

        // Verify market is listed
        Market storage market = markets[address(cToken)];
        if (!market.isListed) {
            return fail(Error.MARKET_NOT_LISTED, FailureInfo.SET_COLLATERAL_FACTOR_NO_EXISTS);
        }

        Exp memory newCollateralFactorExp = Exp({mantissa: newCollateralFactorMantissa});

        // Check collateral factor <= 0.9
        Exp memory highLimit = Exp({mantissa: collateralFactorMaxMantissa});
        if (lessThanExp(highLimit, newCollateralFactorExp)) {
            return fail(Error.INVALID_COLLATERAL_FACTOR, FailureInfo.SET_COLLATERAL_FACTOR_VALIDATION);
        }

        // If collateral factor != 0, fail if price == 0
        if (newCollateralFactorMantissa != 0 && oracle.getUnderlyingPrice(cToken) == 0) {
            return fail(Error.PRICE_ERROR, FailureInfo.SET_COLLATERAL_FACTOR_WITHOUT_PRICE);
        }

        // Set market's collateral factor to new collateral factor, remember old value
        uint oldCollateralFactorMantissa = market.collateralFactorMantissa;
        market.collateralFactorMantissa = newCollateralFactorMantissa;

        // Emit event with asset, old collateral factor, and new collateral factor
        emit NewCollateralFactor(cToken, oldCollateralFactorMantissa, newCollateralFactorMantissa);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Sets liquidationIncentive
      * @dev Admin function to set liquidationIncentive
      * @param newLiquidationIncentiveMantissa New liquidationIncentive scaled by 1e18
      * @return uint 0=success, otherwise a failure. (See ErrorReporter for details)
      */
    function _setLiquidationIncentive(uint newLiquidationIncentiveMantissa) external returns (uint) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_LIQUIDATION_INCENTIVE_OWNER_CHECK);
        }

        // Check de-scaled min <= newLiquidationIncentive <= max
        Exp memory newLiquidationIncentive = Exp({mantissa: newLiquidationIncentiveMantissa});
        Exp memory minLiquidationIncentive = Exp({mantissa: liquidationIncentiveMinMantissa});
        if (lessThanExp(newLiquidationIncentive, minLiquidationIncentive)) {
            return fail(Error.INVALID_LIQUIDATION_INCENTIVE, FailureInfo.SET_LIQUIDATION_INCENTIVE_VALIDATION);
        }

        Exp memory maxLiquidationIncentive = Exp({mantissa: liquidationIncentiveMaxMantissa});
        if (lessThanExp(maxLiquidationIncentive, newLiquidationIncentive)) {
            return fail(Error.INVALID_LIQUIDATION_INCENTIVE, FailureInfo.SET_LIQUIDATION_INCENTIVE_VALIDATION);
        }

        // Save current value for use in log
        uint oldLiquidationIncentiveMantissa = liquidationIncentiveMantissa;

        // Set liquidation incentive to new incentive
        liquidationIncentiveMantissa = newLiquidationIncentiveMantissa;

        // Emit event with old incentive, new incentive
        emit NewLiquidationIncentive(oldLiquidationIncentiveMantissa, newLiquidationIncentiveMantissa);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Add the market to the markets mapping and set it as listed
      * @dev Admin function to set isListed and add support for the market
      * @param cToken The address of the market (token) to list
      * @return uint 0=success, otherwise a failure. (See enum Error for details)
      */
    function _supportMarket(CToken cToken) internal returns (uint) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SUPPORT_MARKET_OWNER_CHECK);
        }

        // Is market already listed?
        if (markets[address(cToken)].isListed) {
            return fail(Error.MARKET_ALREADY_LISTED, FailureInfo.SUPPORT_MARKET_EXISTS);
        }

        // Sanity check to make sure its really a CToken
        require(cToken.isCToken(), "marker method returned false");

        // Check cToken.comptroller == this
        require(address(cToken.comptroller()) == address(this), "Cannot support a market with a different Comptroller.");

        // Make sure market is not already listed
        address underlying = cToken.isCEther() ? address(0) : CErc20(address(cToken)).underlying();

        if (address(cTokensByUnderlying[underlying]) != address(0)) {
            return fail(Error.MARKET_ALREADY_LISTED, FailureInfo.SUPPORT_MARKET_EXISTS);
        }

        // List market and emit event
        markets[address(cToken)] = Market({isListed: true, collateralFactorMantissa: 0});
        allMarkets.push(cToken);
        cTokensByUnderlying[underlying] = cToken;
        emit MarketListed(cToken);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Deploy cToken, add the market to the markets mapping, and set it as listed and set the collateral factor
      * @dev Admin function to deploy cToken, set isListed, and add support for the market and set the collateral factor
      * @return uint 0=success, otherwise a failure. (See enum Error for details)
      */
    function _deployMarket(
        bool isCEther,
        bytes calldata constructorData,
        uint collateralFactorMantissa
    ) external returns (uint) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SUPPORT_MARKET_OWNER_CHECK);
        }

        // Temporarily enable Fuse admin rights for asset deployment (storing the original value)
        bool oldFuseAdminHasRights = fuseAdminHasRights;
        fuseAdminHasRights = true;

        // Deploy via Fuse admin
        CToken cToken = CToken(isCEther ? fuseAdmin.deployCEther(constructorData) : fuseAdmin.deployCErc20(constructorData));

        // Reset Fuse admin rights to the original value
        fuseAdminHasRights = oldFuseAdminHasRights;

        // Support market here in the Comptroller
        uint256 err = _supportMarket(cToken);

        // Set collateral factor
        return err == uint(Error.NO_ERROR) ? _setCollateralFactor(cToken, collateralFactorMantissa) : err;
    }

    /**
      * @notice Removed a market from the markets mapping and sets it as unlisted
      * @dev Admin function unset isListed and collateralFactorMantissa and unadd support for the market
      * @param cToken The address of the market (token) to unlist
      * @return uint 0=success, otherwise a failure. (See enum Error for details)
      */
    function _unsupportMarket(CToken cToken) external returns (uint) {
        // Check admin rights
        if (!hasAdminRights()) return fail(Error.UNAUTHORIZED, FailureInfo.UNSUPPORT_MARKET_OWNER_CHECK);

        // Check if market is already unlisted
        if (!markets[address(cToken)].isListed) return fail(Error.MARKET_NOT_LISTED, FailureInfo.UNSUPPORT_MARKET_DOES_NOT_EXIST);

        // Check if market is in use
        if (cToken.totalSupply() > 0) return fail(Error.NONZERO_TOTAL_SUPPLY, FailureInfo.UNSUPPORT_MARKET_IN_USE);

        // Unlist market
        delete markets[address(cToken)];
        
        /* Delete cToken from allMarkets */
        // load into memory for faster iteration
        CToken[] memory _allMarkets = allMarkets;
        uint len = _allMarkets.length;
        uint assetIndex = len;
        for (uint i = 0; i < len; i++) {
            if (_allMarkets[i] == cToken) {
                assetIndex = i;
                break;
            }
        }

        // We *must* have found the asset in the list or our redundant data structure is broken
        assert(assetIndex < len);

        // copy last item in list to location of item to be removed, reduce length by 1
        allMarkets[assetIndex] = allMarkets[allMarkets.length - 1];
        allMarkets.length--;

        cTokensByUnderlying[cToken.isCEther() ? address(0) : CErc20(address(cToken)).underlying()] = CToken(address(0));
        emit MarketUnlisted(cToken);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Toggles the auto-implementation feature
     * @param enabled If the feature is to be enabled
     * @return uint 0=success, otherwise a failure. (See enum Error for details)
     */
    function _toggleAutoImplementations(bool enabled) public returns (uint) {
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.TOGGLE_AUTO_IMPLEMENTATIONS_ENABLED_OWNER_CHECK);
        }

        // Return no error if already set to the desired value
        if (autoImplementation == enabled) return uint(Error.NO_ERROR);

        // Store autoImplementation with value enabled
        autoImplementation = enabled;

        // Emit AutoImplementationsToggled(enabled)
        emit AutoImplementationsToggled(enabled);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Set the given supply caps for the given cToken markets. Supplying that brings total underlying supply to or above supply cap will revert.
      * @dev Admin or borrowCapGuardian function to set the supply caps. A supply cap of 0 corresponds to unlimited supplying.
      * @param cTokens The addresses of the markets (tokens) to change the supply caps for
      * @param newSupplyCaps The new supply cap values in underlying to be set. A value of 0 corresponds to unlimited supplying.
      */
    function _setMarketSupplyCaps(CToken[] calldata cTokens, uint[] calldata newSupplyCaps) external {
    	require(hasAdminRights() || msg.sender == borrowCapGuardian, "only admin or borrow cap guardian can set supply caps"); 

        uint numMarkets = cTokens.length;
        uint numSupplyCaps = newSupplyCaps.length;

        require(numMarkets != 0 && numMarkets == numSupplyCaps, "invalid input");

        for(uint i = 0; i < numMarkets; i++) {
            supplyCaps[address(cTokens[i])] = newSupplyCaps[i];
            emit NewSupplyCap(cTokens[i], newSupplyCaps[i]);
        }
    }

    /**
      * @notice Set the given borrow caps for the given cToken markets. Borrowing that brings total borrows to or above borrow cap will revert.
      * @dev Admin or borrowCapGuardian function to set the borrow caps. A borrow cap of 0 corresponds to unlimited borrowing.
      * @param cTokens The addresses of the markets (tokens) to change the borrow caps for
      * @param newBorrowCaps The new borrow cap values in underlying to be set. A value of 0 corresponds to unlimited borrowing.
      */
    function _setMarketBorrowCaps(CToken[] calldata cTokens, uint[] calldata newBorrowCaps) external {
    	require(hasAdminRights() || msg.sender == borrowCapGuardian, "only admin or borrow cap guardian can set borrow caps"); 

        uint numMarkets = cTokens.length;
        uint numBorrowCaps = newBorrowCaps.length;

        require(numMarkets != 0 && numMarkets == numBorrowCaps, "invalid input");

        for(uint i = 0; i < numMarkets; i++) {
            borrowCaps[address(cTokens[i])] = newBorrowCaps[i];
            emit NewBorrowCap(cTokens[i], newBorrowCaps[i]);
        }
    }

    /**
     * @notice Admin function to change the Borrow Cap Guardian
     * @param newBorrowCapGuardian The address of the new Borrow Cap Guardian
     */
    function _setBorrowCapGuardian(address newBorrowCapGuardian) external {
        require(hasAdminRights(), "only admin can set borrow cap guardian");

        // Save current value for inclusion in log
        address oldBorrowCapGuardian = borrowCapGuardian;

        // Store borrowCapGuardian with value newBorrowCapGuardian
        borrowCapGuardian = newBorrowCapGuardian;

        // Emit NewBorrowCapGuardian(OldBorrowCapGuardian, NewBorrowCapGuardian)
        emit NewBorrowCapGuardian(oldBorrowCapGuardian, newBorrowCapGuardian);
    }

    /**
     * @notice Admin function to change the Pause Guardian
     * @param newPauseGuardian The address of the new Pause Guardian
     * @return uint 0=success, otherwise a failure. (See enum Error for details)
     */
    function _setPauseGuardian(address newPauseGuardian) public returns (uint) {
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PAUSE_GUARDIAN_OWNER_CHECK);
        }

        // Save current value for inclusion in log
        address oldPauseGuardian = pauseGuardian;

        // Store pauseGuardian with value newPauseGuardian
        pauseGuardian = newPauseGuardian;

        // Emit NewPauseGuardian(OldPauseGuardian, NewPauseGuardian)
        emit NewPauseGuardian(oldPauseGuardian, pauseGuardian);

        return uint(Error.NO_ERROR);
    }

    function _setMintPaused(CToken cToken, bool state) public returns (bool) {
        require(markets[address(cToken)].isListed, "cannot pause a market that is not listed");
        require(msg.sender == pauseGuardian || hasAdminRights(), "only pause guardian and admin can pause");
        require(hasAdminRights() || state == true, "only admin can unpause");

        mintGuardianPaused[address(cToken)] = state;
        emit ActionPaused(cToken, "Mint", state);
        return state;
    }

    function _setBorrowPaused(CToken cToken, bool state) public returns (bool) {
        require(markets[address(cToken)].isListed, "cannot pause a market that is not listed");
        require(msg.sender == pauseGuardian || hasAdminRights(), "only pause guardian and admin can pause");
        require(hasAdminRights() || state == true, "only admin can unpause");

        borrowGuardianPaused[address(cToken)] = state;
        emit ActionPaused(cToken, "Borrow", state);
        return state;
    }

    function _setTransferPaused(bool state) public returns (bool) {
        require(msg.sender == pauseGuardian || hasAdminRights(), "only pause guardian and admin can pause");
        require(hasAdminRights() || state == true, "only admin can unpause");

        transferGuardianPaused = state;
        emit ActionPaused("Transfer", state);
        return state;
    }

    function _setSeizePaused(bool state) public returns (bool) {
        require(msg.sender == pauseGuardian || hasAdminRights(), "only pause guardian and admin can pause");
        require(hasAdminRights() || state == true, "only admin can unpause");

        seizeGuardianPaused = state;
        emit ActionPaused("Seize", state);
        return state;
    }

    function _become(Unitroller unitroller) public {
        require((msg.sender == address(fuseAdmin) && unitroller.fuseAdminHasRights()) || (msg.sender == unitroller.admin() && unitroller.adminHasRights()), "only unitroller admin can change brains");

        uint changeStatus = unitroller._acceptImplementation();
        require(changeStatus == 0, "change not authorized");

        Comptroller(address(unitroller))._becomeImplementation();
    }

    function _becomeImplementation() external {
        require(msg.sender == comptrollerImplementation, "only implementation may call _becomeImplementation");

        if (!_notEnteredInitialized) {
            _notEntered = true;
            _notEnteredInitialized = true;
        }
    }

    /*** Helper Functions ***/

    /**
     * @notice Return all of the markets
     * @dev The automatic getter may be used to access an individual market.
     * @return The list of market addresses
     */
    function getAllMarkets() public view returns (CToken[] memory) {
        return allMarkets;
    }

    /**
     * @notice Return all of the borrowers
     * @dev The automatic getter may be used to access an individual borrower.
     * @return The list of borrower account addresses
     */
    function getAllBorrowers() public view returns (address[] memory) {
        return allBorrowers;
    }

    /**
     * @notice Return all of the whitelist
     * @dev The automatic getter may be used to access an individual whitelist status.
     * @return The list of borrower account addresses
     */
    function getWhitelist() external view returns (address[] memory) {
        return whitelistArray;
    }

    /**
     * @notice Returns an array of all RewardsDistributors
     */
    function getRewardsDistributors() external view returns (address[] memory) {
        return rewardsDistributors;
    }

    /**
     * @notice Returns true if the given cToken market has been deprecated
     * @dev All borrows in a deprecated cToken market can be immediately liquidated
     * @param cToken The market to check if deprecated
     */
    function isDeprecated(CToken cToken) public view returns (bool) {
        return
            markets[address(cToken)].collateralFactorMantissa == 0 && 
            borrowGuardianPaused[address(cToken)] == true && 
            add_(add_(cToken.reserveFactorMantissa(), cToken.adminFeeMantissa()), cToken.fuseFeeMantissa()) == 1e18
        ;
    }

    /*** Pool-Wide/Cross-Asset Reentrancy Prevention ***/

    /**
     * @dev Called by cTokens before a non-reentrant function for pool-wide reentrancy prevention.
     * Prevents pool-wide/cross-asset reentrancy exploits like AMP on Cream.
     */
    function _beforeNonReentrant() external {
        require(markets[msg.sender].isListed, "Comptroller:_beforeNonReentrant: caller not listed as market");
        require(_notEntered, "re-entered across assets");
        _notEntered = false;
    }

    /**
     * @dev Called by cTokens after a non-reentrant function for pool-wide reentrancy prevention.
     * Prevents pool-wide/cross-asset reentrancy exploits like AMP on Cream.
     */
    function _afterNonReentrant() external {
        require(markets[msg.sender].isListed, "Comptroller:_afterNonReentrant: caller not listed as market");
        _notEntered = true; // get a gas-refund post-Istanbul
    }
}

File 9 of 28: ComptrollerInterface.sol
pragma solidity ^0.5.16;

contract ComptrollerInterface {
    /// @notice Indicator that this is a Comptroller contract (for inspection)
    bool public constant isComptroller = true;

    /*** Assets You Are In ***/

    function enterMarkets(address[] calldata cTokens) external returns (uint[] memory);
    function exitMarket(address cToken) external returns (uint);

    /*** Policy Hooks ***/

    function mintAllowed(address cToken, address minter, uint mintAmount) external returns (uint);
    function mintWithinLimits(address cToken, uint exchangeRateMantissa, uint accountTokens, uint mintAmount) external returns (uint);
    function mintVerify(address cToken, address minter, uint mintAmount, uint mintTokens) external;

    function redeemAllowed(address cToken, address redeemer, uint redeemTokens) external returns (uint);
    function redeemVerify(address cToken, address redeemer, uint redeemAmount, uint redeemTokens) external;

    function borrowAllowed(address cToken, address borrower, uint borrowAmount) external returns (uint);
    function borrowWithinLimits(address cToken, uint accountBorrowsNew) external returns (uint);
    function borrowVerify(address cToken, address borrower, uint borrowAmount) external;

    function repayBorrowAllowed(
        address cToken,
        address payer,
        address borrower,
        uint repayAmount) external returns (uint);
    function repayBorrowVerify(
        address cToken,
        address payer,
        address borrower,
        uint repayAmount,
        uint borrowerIndex) external;

    function liquidateBorrowAllowed(
        address cTokenBorrowed,
        address cTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount) external returns (uint);
    function liquidateBorrowVerify(
        address cTokenBorrowed,
        address cTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount,
        uint seizeTokens) external;

    function seizeAllowed(
        address cTokenCollateral,
        address cTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external returns (uint);
    function seizeVerify(
        address cTokenCollateral,
        address cTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) external;

    function transferAllowed(address cToken, address src, address dst, uint transferTokens) external returns (uint);
    function transferVerify(address cToken, address src, address dst, uint transferTokens) external;

    /*** Liquidity/Liquidation Calculations ***/

    function liquidateCalculateSeizeTokens(
        address cTokenBorrowed,
        address cTokenCollateral,
        uint repayAmount) external view returns (uint, uint);
    
    /*** Pool-Wide/Cross-Asset Reentrancy Prevention ***/

    function _beforeNonReentrant() external;
    function _afterNonReentrant() external;
}

File 10 of 28: ComptrollerStorage.sol
pragma solidity ^0.5.16;

import "./IFuseFeeDistributor.sol";
import "./CToken.sol";
import "./PriceOracle.sol";

contract UnitrollerAdminStorage {
    /**
     * @notice Administrator for Fuse
     */
    IFuseFeeDistributor internal constant fuseAdmin = IFuseFeeDistributor(0x4AFB2B3DC111D091ca6C46C024d1d2f17BF477e1);

    /**
    * @notice Administrator for this contract
    */
    address public admin;

    /**
    * @notice Pending administrator for this contract
    */
    address public pendingAdmin;

    /**
     * @notice Whether or not the Fuse admin has admin rights
     */
    bool public fuseAdminHasRights = true;

    /**
     * @notice Whether or not the admin has admin rights
     */
    bool public adminHasRights = true;

    /**
     * @notice Returns a boolean indicating if the sender has admin rights
     */
    function hasAdminRights() internal view returns (bool) {
        return (msg.sender == admin && adminHasRights) || (msg.sender == address(fuseAdmin) && fuseAdminHasRights);
    }

    /**
    * @notice Active brains of Unitroller
    */
    address public comptrollerImplementation;

    /**
    * @notice Pending brains of Unitroller
    */
    address public pendingComptrollerImplementation;
}

contract ComptrollerV1Storage is UnitrollerAdminStorage {
    /**
     * @notice Oracle which gives the price of any given asset
     */
    PriceOracle public oracle;

    /**
     * @notice Multiplier used to calculate the maximum repayAmount when liquidating a borrow
     */
    uint public closeFactorMantissa;

    /**
     * @notice Multiplier representing the discount on collateral that a liquidator receives
     */
    uint public liquidationIncentiveMantissa;

    /**
     * @notice UNUSED AFTER UPGRADE: Max number of assets a single account can participate in (borrow or use as collateral)
     */
    uint internal maxAssets;

    /**
     * @notice Per-account mapping of "assets you are in", capped by maxAssets
     */
    mapping(address => CToken[]) public accountAssets;

}

contract ComptrollerV2Storage is ComptrollerV1Storage {
    struct Market {
        /**
         * @notice Whether or not this market is listed
         */
        bool isListed;

        /**
         * @notice Multiplier representing the most one can borrow against their collateral in this market.
         *  For instance, 0.9 to allow borrowing 90% of collateral value.
         *  Must be between 0 and 1, and stored as a mantissa.
         */
        uint collateralFactorMantissa;

        /**
         * @notice Per-market mapping of "accounts in this asset"
         */
        mapping(address => bool) accountMembership;
    }

    /**
     * @notice Official mapping of cTokens -> Market metadata
     * @dev Used e.g. to determine if a market is supported
     */
    mapping(address => Market) public markets;

    /// @notice A list of all markets
    CToken[] public allMarkets;

    /**
     * @dev Maps borrowers to booleans indicating if they have entered any markets
     */
    mapping(address => bool) internal borrowers;

    /// @notice A list of all borrowers who have entered markets
    address[] public allBorrowers;

    /// @notice Indexes of borrower account addresses in the `allBorrowers` array
    mapping(address => uint256) internal borrowerIndexes;

    /**
     * @dev Maps suppliers to booleans indicating if they have ever supplied to any markets
     */
    mapping(address => bool) public suppliers;

    /// @notice All cTokens addresses mapped by their underlying token addresses
    mapping(address => CToken) public cTokensByUnderlying;

    /// @notice Whether or not the supplier whitelist is enforced
    bool public enforceWhitelist;

    /// @notice Maps addresses to booleans indicating if they are allowed to supply assets (i.e., mint cTokens)
    mapping(address => bool) public whitelist;

    /// @notice An array of all whitelisted accounts
    address[] public whitelistArray;

    /// @notice Indexes of account addresses in the `whitelistArray` array
    mapping(address => uint256) internal whitelistIndexes;

    /**
     * @notice The Pause Guardian can pause certain actions as a safety mechanism.
     *  Actions which allow users to remove their own assets cannot be paused.
     *  Liquidation / seizing / transfer can only be paused globally, not by market.
     */
    address public pauseGuardian;
    bool public _mintGuardianPaused;
    bool public _borrowGuardianPaused;
    bool public transferGuardianPaused;
    bool public seizeGuardianPaused;
    mapping(address => bool) public mintGuardianPaused;
    mapping(address => bool) public borrowGuardianPaused;
}

contract ComptrollerV3Storage is ComptrollerV2Storage {
    /**
     * @dev Whether or not the implementation should be auto-upgraded.
     */
    bool public autoImplementation;

    /// @notice The borrowCapGuardian can set borrowCaps to any number for any market. Lowering the borrow cap could disable borrowing on the given market.
    address public borrowCapGuardian;

    /// @notice Borrow caps enforced by borrowAllowed for each cToken address. Defaults to zero which corresponds to unlimited borrowing.
    mapping(address => uint) public borrowCaps;

    /// @notice Supply caps enforced by mintAllowed for each cToken address. Defaults to zero which corresponds to unlimited supplying.
    mapping(address => uint) public supplyCaps;

    /// @notice RewardsDistributor contracts to notify of flywheel changes.
    address[] public rewardsDistributors;

    /// @dev Guard variable for pool-wide/cross-asset re-entrancy checks
    bool internal _notEntered;

    /// @dev Whether or not _notEntered has been initialized
    bool internal _notEnteredInitialized;
}

File 11 of 28: CToken.sol
pragma solidity ^0.5.16;

import "./ComptrollerInterface.sol";
import "./CTokenInterfaces.sol";
import "./ErrorReporter.sol";
import "./Exponential.sol";
import "./EIP20Interface.sol";
import "./EIP20NonStandardInterface.sol";
import "./InterestRateModel.sol";

/**
 * @title Compound's CToken Contract
 * @notice Abstract base for CTokens
 * @author Compound
 */
contract CToken is CTokenInterface, Exponential, TokenErrorReporter {
    /**
     * @notice Returns a boolean indicating if the sender has admin rights
     */
    function hasAdminRights() internal view returns (bool) {
        ComptrollerV3Storage comptrollerStorage = ComptrollerV3Storage(address(comptroller));
        return (msg.sender == comptrollerStorage.admin() && comptrollerStorage.adminHasRights()) || (msg.sender == address(fuseAdmin) && comptrollerStorage.fuseAdminHasRights());
    }

    /**
     * @notice Initialize the money market
     * @param comptroller_ The address of the Comptroller
     * @param interestRateModel_ The address of the interest rate model
     * @param initialExchangeRateMantissa_ The initial exchange rate, scaled by 1e18
     * @param name_ EIP-20 name of this token
     * @param symbol_ EIP-20 symbol of this token
     * @param decimals_ EIP-20 decimal precision of this token
     */
    function initialize(ComptrollerInterface comptroller_,
                        InterestRateModel interestRateModel_,
                        uint initialExchangeRateMantissa_,
                        string memory name_,
                        string memory symbol_,
                        uint8 decimals_,
                        uint256 reserveFactorMantissa_,
                        uint256 adminFeeMantissa_) public {
        require(msg.sender == address(fuseAdmin), "only Fuse admin may initialize the market");
        require(accrualBlockNumber == 0 && borrowIndex == 0, "market may only be initialized once");

        // Set initial exchange rate
        initialExchangeRateMantissa = initialExchangeRateMantissa_;
        require(initialExchangeRateMantissa > 0, "initial exchange rate must be greater than zero.");

        // Set the comptroller
        uint err = _setComptroller(comptroller_);
        require(err == uint(Error.NO_ERROR), "setting comptroller failed");

        // Initialize block number and borrow index (block number mocks depend on comptroller being set)
        accrualBlockNumber = getBlockNumber();
        borrowIndex = mantissaOne;

        // Set the interest rate model (depends on block number / borrow index)
        err = _setInterestRateModelFresh(interestRateModel_);
        require(err == uint(Error.NO_ERROR), "setting interest rate model failed");

        name = name_;
        symbol = symbol_;
        decimals = decimals_;

        // Set reserve factor
        err = _setReserveFactorFresh(reserveFactorMantissa_);
        require(err == uint(Error.NO_ERROR), "setting reserve factor failed");

        // Set admin fee
        err = _setAdminFeeFresh(adminFeeMantissa_);
        require(err == uint(Error.NO_ERROR), "setting admin fee failed");

        // The counter starts true to prevent changing it from zero to non-zero (i.e. smaller cost/refund)
        _notEntered = true;
    }
    
    /**
     * @dev Returns latest pending Fuse fee (to be set with `_setFuseFeeFresh`)
     */
    function getPendingFuseFeeFromAdmin() internal view returns (uint) {
        return fuseAdmin.interestFeeRate();
    }

    /**
     * @notice Transfer `tokens` tokens from `src` to `dst` by `spender`
     * @dev Called by both `transfer` and `transferFrom` internally
     * @param spender The address of the account performing the transfer
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param tokens The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferTokens(address spender, address src, address dst, uint tokens) internal returns (uint) {
        /* Fail if transfer not allowed */
        uint allowed = comptroller.transferAllowed(address(this), src, dst, tokens);
        if (allowed != 0) {
            return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.TRANSFER_COMPTROLLER_REJECTION, allowed);
        }

        /* Do not allow self-transfers */
        if (src == dst) {
            return fail(Error.BAD_INPUT, FailureInfo.TRANSFER_NOT_ALLOWED);
        }

        /* Get the allowance, infinite for the account owner */
        uint startingAllowance = 0;
        if (spender == src) {
            startingAllowance = uint(-1);
        } else {
            startingAllowance = transferAllowances[src][spender];
        }

        /* Do the calculations, checking for {under,over}flow */
        MathError mathErr;
        uint allowanceNew;
        uint srcTokensNew;
        uint dstTokensNew;

        (mathErr, allowanceNew) = subUInt(startingAllowance, tokens);
        if (mathErr != MathError.NO_ERROR) {
            return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_NOT_ALLOWED);
        }

        (mathErr, srcTokensNew) = subUInt(accountTokens[src], tokens);
        if (mathErr != MathError.NO_ERROR) {
            return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_NOT_ENOUGH);
        }

        (mathErr, dstTokensNew) = addUInt(accountTokens[dst], tokens);
        if (mathErr != MathError.NO_ERROR) {
            return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_TOO_MUCH);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        accountTokens[src] = srcTokensNew;
        accountTokens[dst] = dstTokensNew;

        /* Eat some of the allowance (if necessary) */
        if (startingAllowance != uint(-1)) {
            transferAllowances[src][spender] = allowanceNew;
        }

        /* We emit a Transfer event */
        emit Transfer(src, dst, tokens);

        /* We call the defense hook */
        // unused function
        // comptroller.transferVerify(address(this), src, dst, tokens);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Transfer `amount` tokens from `msg.sender` to `dst`
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transfer(address dst, uint256 amount) external nonReentrant(false) returns (bool) {
        return transferTokens(msg.sender, msg.sender, dst, amount) == uint(Error.NO_ERROR);
    }

    /**
     * @notice Transfer `amount` tokens from `src` to `dst`
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferFrom(address src, address dst, uint256 amount) external nonReentrant(false) returns (bool) {
        return transferTokens(msg.sender, src, dst, amount) == uint(Error.NO_ERROR);
    }

    /**
     * @notice Approve `spender` to transfer up to `amount` from `src`
     * @dev This will overwrite the approval amount for `spender`
     *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
     * @param spender The address of the account which may transfer tokens
     * @param amount The number of tokens that are approved (-1 means infinite)
     * @return Whether or not the approval succeeded
     */
    function approve(address spender, uint256 amount) external returns (bool) {
        address src = msg.sender;
        transferAllowances[src][spender] = amount;
        emit Approval(src, spender, amount);
        return true;
    }

    /**
     * @notice Get the current allowance from `owner` for `spender`
     * @param owner The address of the account which owns the tokens to be spent
     * @param spender The address of the account which may transfer tokens
     * @return The number of tokens allowed to be spent (-1 means infinite)
     */
    function allowance(address owner, address spender) external view returns (uint256) {
        return transferAllowances[owner][spender];
    }

    /**
     * @notice Get the token balance of the `owner`
     * @param owner The address of the account to query
     * @return The number of tokens owned by `owner`
     */
    function balanceOf(address owner) external view returns (uint256) {
        return accountTokens[owner];
    }

    /**
     * @notice Get the underlying balance of the `owner`
     * @dev This also accrues interest in a transaction
     * @param owner The address of the account to query
     * @return The amount of underlying owned by `owner`
     */
    function balanceOfUnderlying(address owner) external returns (uint) {
        Exp memory exchangeRate = Exp({mantissa: exchangeRateCurrent()});
        (MathError mErr, uint balance) = mulScalarTruncate(exchangeRate, accountTokens[owner]);
        require(mErr == MathError.NO_ERROR, "balance could not be calculated");
        return balance;
    }

    /**
     * @notice Get a snapshot of the account's balances, and the cached exchange rate
     * @dev This is used by comptroller to more efficiently perform liquidity checks.
     * @param account Address of the account to snapshot
     * @return (possible error, token balance, borrow balance, exchange rate mantissa)
     */
    function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint) {
        uint cTokenBalance = accountTokens[account];
        uint borrowBalance;
        uint exchangeRateMantissa;

        MathError mErr;

        (mErr, borrowBalance) = borrowBalanceStoredInternal(account);
        if (mErr != MathError.NO_ERROR) {
            return (uint(Error.MATH_ERROR), 0, 0, 0);
        }

        (mErr, exchangeRateMantissa) = exchangeRateStoredInternal();
        if (mErr != MathError.NO_ERROR) {
            return (uint(Error.MATH_ERROR), 0, 0, 0);
        }

        return (uint(Error.NO_ERROR), cTokenBalance, borrowBalance, exchangeRateMantissa);
    }

    /**
     * @dev Function to simply retrieve block number
     *  This exists mainly for inheriting test contracts to stub this result.
     */
    function getBlockNumber() internal view returns (uint) {
        return block.number;
    }

    /**
     * @notice Returns the current per-block borrow interest rate for this cToken
     * @return The borrow interest rate per block, scaled by 1e18
     */
    function borrowRatePerBlock() external view returns (uint) {
        return interestRateModel.getBorrowRate(getCashPrior(), totalBorrows, add_(totalReserves, add_(totalAdminFees, totalFuseFees)));
    }

    /**
     * @notice Returns the current per-block supply interest rate for this cToken
     * @return The supply interest rate per block, scaled by 1e18
     */
    function supplyRatePerBlock() external view returns (uint) {
        return interestRateModel.getSupplyRate(getCashPrior(), totalBorrows, add_(totalReserves, add_(totalAdminFees, totalFuseFees)), reserveFactorMantissa + fuseFeeMantissa + adminFeeMantissa);
    }

    /**
     * @notice Returns the current total borrows plus accrued interest
     * @return The total borrows with interest
     */
    function totalBorrowsCurrent() external nonReentrant(false) returns (uint) {
        require(accrueInterest() == uint(Error.NO_ERROR), "accrue interest failed");
        return totalBorrows;
    }

    /**
     * @notice Accrue interest to updated borrowIndex and then calculate account's borrow balance using the updated borrowIndex
     * @param account The address whose balance should be calculated after updating borrowIndex
     * @return The calculated balance
     */
    function borrowBalanceCurrent(address account) external nonReentrant(false) returns (uint) {
        require(accrueInterest() == uint(Error.NO_ERROR), "accrue interest failed");
        return borrowBalanceStored(account);
    }

    /**
     * @notice Return the borrow balance of account based on stored data
     * @param account The address whose balance should be calculated
     * @return The calculated balance
     */
    function borrowBalanceStored(address account) public view returns (uint) {
        (MathError err, uint result) = borrowBalanceStoredInternal(account);
        require(err == MathError.NO_ERROR, "borrowBalanceStored: borrowBalanceStoredInternal failed");
        return result;
    }

    /**
     * @notice Return the borrow balance of account based on stored data
     * @param account The address whose balance should be calculated
     * @return (error code, the calculated balance or 0 if error code is non-zero)
     */
    function borrowBalanceStoredInternal(address account) internal view returns (MathError, uint) {
        /* Note: we do not assert that the market is up to date */
        MathError mathErr;
        uint principalTimesIndex;
        uint result;

        /* Get borrowBalance and borrowIndex */
        BorrowSnapshot storage borrowSnapshot = accountBorrows[account];

        /* If borrowBalance = 0 then borrowIndex is likely also 0.
         * Rather than failing the calculation with a division by 0, we immediately return 0 in this case.
         */
        if (borrowSnapshot.principal == 0) {
            return (MathError.NO_ERROR, 0);
        }

        /* Calculate new borrow balance using the interest index:
         *  recentBorrowBalance = borrower.borrowBalance * market.borrowIndex / borrower.borrowIndex
         */
        (mathErr, principalTimesIndex) = mulUInt(borrowSnapshot.principal, borrowIndex);
        if (mathErr != MathError.NO_ERROR) {
            return (mathErr, 0);
        }

        (mathErr, result) = divUInt(principalTimesIndex, borrowSnapshot.interestIndex);
        if (mathErr != MathError.NO_ERROR) {
            return (mathErr, 0);
        }

        return (MathError.NO_ERROR, result);
    }

    /**
     * @notice Accrue interest then return the up-to-date exchange rate
     * @return Calculated exchange rate scaled by 1e18
     */
    function exchangeRateCurrent() public nonReentrant(false) returns (uint) {
        require(accrueInterest() == uint(Error.NO_ERROR), "accrue interest failed");
        return exchangeRateStored();
    }

    /**
     * @notice Calculates the exchange rate from the underlying to the CToken
     * @dev This function does not accrue interest before calculating the exchange rate
     * @return Calculated exchange rate scaled by 1e18
     */
    function exchangeRateStored() public view returns (uint) {
        (MathError err, uint result) = exchangeRateStoredInternal();
        require(err == MathError.NO_ERROR, "exchangeRateStored: exchangeRateStoredInternal failed");
        return result;
    }

    /**
     * @notice Calculates the exchange rate from the underlying to the CToken
     * @dev This function does not accrue interest before calculating the exchange rate
     * @return (error code, calculated exchange rate scaled by 1e18)
     */
    function exchangeRateStoredInternal() internal view returns (MathError, uint) {
        uint _totalSupply = totalSupply;
        if (_totalSupply == 0) {
            /*
             * If there are no tokens minted:
             *  exchangeRate = initialExchangeRate
             */
            return (MathError.NO_ERROR, initialExchangeRateMantissa);
        } else {
            /*
             * Otherwise:
             *  exchangeRate = (totalCash + totalBorrows - (totalReserves + totalFuseFees + totalAdminFees)) / totalSupply
             */
            uint totalCash = getCashPrior();
            uint cashPlusBorrowsMinusReserves;
            Exp memory exchangeRate;
            MathError mathErr;

            (mathErr, cashPlusBorrowsMinusReserves) = addThenSubUInt(totalCash, totalBorrows, add_(totalReserves, add_(totalAdminFees, totalFuseFees)));
            if (mathErr != MathError.NO_ERROR) {
                return (mathErr, 0);
            }

            (mathErr, exchangeRate) = getExp(cashPlusBorrowsMinusReserves, _totalSupply);
            if (mathErr != MathError.NO_ERROR) {
                return (mathErr, 0);
            }

            return (MathError.NO_ERROR, exchangeRate.mantissa);
        }
    }

    /**
     * @notice Get cash balance of this cToken in the underlying asset
     * @return The quantity of underlying asset owned by this contract
     */
    function getCash() external view returns (uint) {
        return getCashPrior();
    }

    /**
     * @notice Applies accrued interest to total borrows and reserves
     * @dev This calculates interest accrued from the last checkpointed block
     *   up to the current block and writes new checkpoint to storage.
     */
    function accrueInterest() public returns (uint) {
        /* Remember the initial block number */
        uint currentBlockNumber = getBlockNumber();

        /* Short-circuit accumulating 0 interest */
        if (accrualBlockNumber == currentBlockNumber) {
            return uint(Error.NO_ERROR);
        }

        /* Read the previous values out of storage */
        uint cashPrior = getCashPrior();

        /* Calculate the current borrow interest rate */
        uint borrowRateMantissa = interestRateModel.getBorrowRate(cashPrior, totalBorrows, add_(totalReserves, add_(totalAdminFees, totalFuseFees)));
        require(borrowRateMantissa <= borrowRateMaxMantissa, "borrow rate is absurdly high");

        /* Calculate the number of blocks elapsed since the last accrual */
        (MathError mathErr, uint blockDelta) = subUInt(currentBlockNumber, accrualBlockNumber);
        require(mathErr == MathError.NO_ERROR, "could not calculate block delta");

        return finishInterestAccrual(currentBlockNumber, cashPrior, borrowRateMantissa, blockDelta);
    }

    /**
     * @dev Split off from `accrueInterest` to avoid "stack too deep" error".
     */
    function finishInterestAccrual(uint currentBlockNumber, uint cashPrior, uint borrowRateMantissa, uint blockDelta) private returns (uint) {
        /*
         * Calculate the interest accumulated into borrows and reserves and the new index:
         *  simpleInterestFactor = borrowRate * blockDelta
         *  interestAccumulated = simpleInterestFactor * totalBorrows
         *  totalBorrowsNew = interestAccumulated + totalBorrows
         *  totalReservesNew = interestAccumulated * reserveFactor + totalReserves
         *  totalFuseFeesNew = interestAccumulated * fuseFee + totalFuseFees
         *  totalAdminFeesNew = interestAccumulated * adminFee + totalAdminFees
         *  borrowIndexNew = simpleInterestFactor * borrowIndex + borrowIndex
         */

        Exp memory simpleInterestFactor = mul_(Exp({mantissa: borrowRateMantissa}), blockDelta);
        uint interestAccumulated = mul_ScalarTruncate(simpleInterestFactor, totalBorrows);
        uint totalBorrowsNew = add_(interestAccumulated, totalBorrows);
        uint totalReservesNew = mul_ScalarTruncateAddUInt(Exp({mantissa: reserveFactorMantissa}), interestAccumulated, totalReserves);
        uint totalFuseFeesNew = mul_ScalarTruncateAddUInt(Exp({mantissa: fuseFeeMantissa}), interestAccumulated, totalFuseFees);
        uint totalAdminFeesNew = mul_ScalarTruncateAddUInt(Exp({mantissa: adminFeeMantissa}), interestAccumulated, totalAdminFees);
        uint borrowIndexNew = mul_ScalarTruncateAddUInt(simpleInterestFactor, borrowIndex, borrowIndex);

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We write the previously calculated values into storage */
        accrualBlockNumber = currentBlockNumber;
        borrowIndex = borrowIndexNew;
        totalBorrows = totalBorrowsNew;
        totalReserves = totalReservesNew;
        totalFuseFees = totalFuseFeesNew;
        totalAdminFees = totalAdminFeesNew;

        /* We emit an AccrueInterest event */
        emit AccrueInterest(cashPrior, interestAccumulated, borrowIndexNew, totalBorrowsNew);

        // Attempt to add interest checkpoint
        address(interestRateModel).call(abi.encodeWithSignature("checkpointInterest(uint256)", borrowRateMantissa));

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Sender supplies assets into the market and receives cTokens in exchange
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param mintAmount The amount of the underlying asset to supply
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual mint amount.
     */
    function mintInternal(uint mintAmount) internal nonReentrant(false) returns (uint, uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
            return (fail(Error(error), FailureInfo.MINT_ACCRUE_INTEREST_FAILED), 0);
        }
        // mintFresh emits the actual Mint event if successful and logs on errors, so we don't need to
        return mintFresh(msg.sender, mintAmount);
    }

    struct MintLocalVars {
        Error err;
        MathError mathErr;
        uint exchangeRateMantissa;
        uint mintTokens;
        uint totalSupplyNew;
        uint accountTokensNew;
        uint actualMintAmount;
    }

    /**
     * @notice User supplies assets into the market and receives cTokens in exchange
     * @dev Assumes interest has already been accrued up to the current block
     * @param minter The address of the account which is supplying the assets
     * @param mintAmount The amount of the underlying asset to supply
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual mint amount.
     */
    function mintFresh(address minter, uint mintAmount) internal returns (uint, uint) {
        /* Fail if mint not allowed */
        uint allowed = comptroller.mintAllowed(address(this), minter, mintAmount);
        if (allowed != 0) {
            return (failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.MINT_COMPTROLLER_REJECTION, allowed), 0);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return (fail(Error.MARKET_NOT_FRESH, FailureInfo.MINT_FRESHNESS_CHECK), 0);
        }

        MintLocalVars memory vars;

        (vars.mathErr, vars.exchangeRateMantissa) = exchangeRateStoredInternal();
        if (vars.mathErr != MathError.NO_ERROR) {
            return (failOpaque(Error.MATH_ERROR, FailureInfo.MINT_EXCHANGE_RATE_READ_FAILED, uint(vars.mathErr)), 0);
        }

        // Check max supply
        // unused function
        /* allowed = comptroller.mintWithinLimits(address(this), vars.exchangeRateMantissa, accountTokens[minter], mintAmount);
        if (allowed != 0) {
            return (failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.MINT_COMPTROLLER_REJECTION, allowed), 0);
        } */

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         *  We call `doTransferIn` for the minter and the mintAmount.
         *  Note: The cToken must handle variations between ERC-20 and ETH underlying.
         *  `doTransferIn` reverts if anything goes wrong, since we can't be sure if
         *  side-effects occurred. The function returns the amount actually transferred,
         *  in case of a fee. On success, the cToken holds an additional `actualMintAmount`
         *  of cash.
         */
        vars.actualMintAmount = doTransferIn(minter, mintAmount);

        /*
         * We get the current exchange rate and calculate the number of cTokens to be minted:
         *  mintTokens = actualMintAmount / exchangeRate
         */

        (vars.mathErr, vars.mintTokens) = divScalarByExpTruncate(vars.actualMintAmount, Exp({mantissa: vars.exchangeRateMantissa}));
        require(vars.mathErr == MathError.NO_ERROR, "MINT_EXCHANGE_CALCULATION_FAILED");

        /*
         * We calculate the new total supply of cTokens and minter token balance, checking for overflow:
         *  totalSupplyNew = totalSupply + mintTokens
         *  accountTokensNew = accountTokens[minter] + mintTokens
         */
        vars.totalSupplyNew = add_(totalSupply, vars.mintTokens);

        vars.accountTokensNew = add_(accountTokens[minter], vars.mintTokens);

        /* We write previously calculated values into storage */
        totalSupply = vars.totalSupplyNew;
        accountTokens[minter] = vars.accountTokensNew;

        /* We emit a Mint event, and a Transfer event */
        emit Mint(minter, vars.actualMintAmount, vars.mintTokens);
        emit Transfer(address(this), minter, vars.mintTokens);

        /* We call the defense hook */
        comptroller.mintVerify(address(this), minter, vars.actualMintAmount, vars.mintTokens);

        return (uint(Error.NO_ERROR), vars.actualMintAmount);
    }

    /**
     * @notice Sender redeems cTokens in exchange for the underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemTokens The number of cTokens to redeem into underlying
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemInternal(uint redeemTokens) internal nonReentrant(false) returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted redeem failed
            return fail(Error(error), FailureInfo.REDEEM_ACCRUE_INTEREST_FAILED);
        }
        // redeemFresh emits redeem-specific logs on errors, so we don't need to
        return redeemFresh(msg.sender, redeemTokens, 0);
    }

    /**
     * @notice Sender redeems cTokens in exchange for a specified amount of underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemAmount The amount of underlying to receive from redeeming cTokens
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemUnderlyingInternal(uint redeemAmount) internal nonReentrant(false) returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted redeem failed
            return fail(Error(error), FailureInfo.REDEEM_ACCRUE_INTEREST_FAILED);
        }
        // redeemFresh emits redeem-specific logs on errors, so we don't need to
        return redeemFresh(msg.sender, 0, redeemAmount);
    }

    struct RedeemLocalVars {
        Error err;
        MathError mathErr;
        uint exchangeRateMantissa;
        uint redeemTokens;
        uint redeemAmount;
        uint totalSupplyNew;
        uint accountTokensNew;
    }

    /**
     * @notice User redeems cTokens in exchange for the underlying asset
     * @dev Assumes interest has already been accrued up to the current block
     * @param redeemer The address of the account which is redeeming the tokens
     * @param redeemTokensIn The number of cTokens to redeem into underlying (only one of redeemTokensIn or redeemAmountIn may be non-zero)
     * @param redeemAmountIn The number of underlying tokens to receive from redeeming cTokens (only one of redeemTokensIn or redeemAmountIn may be non-zero)
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemFresh(address payable redeemer, uint redeemTokensIn, uint redeemAmountIn) internal returns (uint) {
        require(redeemTokensIn == 0 || redeemAmountIn == 0, "one of redeemTokensIn or redeemAmountIn must be zero");

        RedeemLocalVars memory vars;

        /* exchangeRate = invoke Exchange Rate Stored() */
        (vars.mathErr, vars.exchangeRateMantissa) = exchangeRateStoredInternal();
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_EXCHANGE_RATE_READ_FAILED, uint(vars.mathErr));
        }

        /* If redeemTokensIn > 0: */
        if (redeemTokensIn > 0) {
            /*
             * We calculate the exchange rate and the amount of underlying to be redeemed:
             *  redeemTokens = redeemTokensIn
             *  redeemAmount = redeemTokensIn x exchangeRateCurrent
             */
            vars.redeemTokens = redeemTokensIn;

            (vars.mathErr, vars.redeemAmount) = mulScalarTruncate(Exp({mantissa: vars.exchangeRateMantissa}), redeemTokensIn);
            if (vars.mathErr != MathError.NO_ERROR) {
                return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_EXCHANGE_TOKENS_CALCULATION_FAILED, uint(vars.mathErr));
            }
        } else {
            /*
             * We get the current exchange rate and calculate the amount to be redeemed:
             *  redeemTokens = redeemAmountIn / exchangeRate
             *  redeemAmount = redeemAmountIn
             */

            (vars.mathErr, vars.redeemTokens) = divScalarByExpTruncate(redeemAmountIn, Exp({mantissa: vars.exchangeRateMantissa}));
            if (vars.mathErr != MathError.NO_ERROR) {
                return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_EXCHANGE_AMOUNT_CALCULATION_FAILED, uint(vars.mathErr));
            }

            vars.redeemAmount = redeemAmountIn;
        }

        /* Fail if redeem not allowed */
        uint allowed = comptroller.redeemAllowed(address(this), redeemer, vars.redeemTokens);
        if (allowed != 0) {
            return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.REDEEM_COMPTROLLER_REJECTION, allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.REDEEM_FRESHNESS_CHECK);
        }

        /*
         * We calculate the new total supply and redeemer balance, checking for underflow:
         *  totalSupplyNew = totalSupply - redeemTokens
         *  accountTokensNew = accountTokens[redeemer] - redeemTokens
         */
        (vars.mathErr, vars.totalSupplyNew) = subUInt(totalSupply, vars.redeemTokens);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.accountTokensNew) = subUInt(accountTokens[redeemer], vars.redeemTokens);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        /* Fail gracefully if protocol has insufficient cash */
        if (getCashPrior() < vars.redeemAmount) {
            return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.REDEEM_TRANSFER_OUT_NOT_POSSIBLE);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We invoke doTransferOut for the redeemer and the redeemAmount.
         *  Note: The cToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the cToken has redeemAmount less of cash.
         *  doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
         */
        doTransferOut(redeemer, vars.redeemAmount);

        /* We write previously calculated values into storage */
        totalSupply = vars.totalSupplyNew;
        accountTokens[redeemer] = vars.accountTokensNew;

        /* We emit a Transfer event, and a Redeem event */
        emit Transfer(redeemer, address(this), vars.redeemTokens);
        emit Redeem(redeemer, vars.redeemAmount, vars.redeemTokens);

        /* We call the defense hook */
        comptroller.redeemVerify(address(this), redeemer, vars.redeemAmount, vars.redeemTokens);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Sender borrows assets from the protocol to their own address
      * @param borrowAmount The amount of the underlying asset to borrow
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function borrowInternal(uint borrowAmount) internal nonReentrant(false) returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
            return fail(Error(error), FailureInfo.BORROW_ACCRUE_INTEREST_FAILED);
        }
        // borrowFresh emits borrow-specific logs on errors, so we don't need to
        return borrowFresh(msg.sender, borrowAmount);
    }

    struct BorrowLocalVars {
        MathError mathErr;
        uint accountBorrows;
        uint accountBorrowsNew;
        uint totalBorrowsNew;
    }

    /**
      * @notice Users borrow assets from the protocol to their own address
      * @param borrowAmount The amount of the underlying asset to borrow
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function borrowFresh(address payable borrower, uint borrowAmount) internal returns (uint) {
        /* Fail if borrow not allowed */
        uint allowed = comptroller.borrowAllowed(address(this), borrower, borrowAmount);
        if (allowed != 0) {
            return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.BORROW_COMPTROLLER_REJECTION, allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.BORROW_FRESHNESS_CHECK);
        }

        /* Fail gracefully if protocol has insufficient underlying cash */
        uint cashPrior = getCashPrior();

        if (cashPrior < borrowAmount) {
            return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.BORROW_CASH_NOT_AVAILABLE);
        }

        BorrowLocalVars memory vars;

        /*
         * We calculate the new borrower and total borrow balances, failing on overflow:
         *  accountBorrowsNew = accountBorrows + borrowAmount
         *  totalBorrowsNew = totalBorrows + borrowAmount
         */
        (vars.mathErr, vars.accountBorrows) = borrowBalanceStoredInternal(borrower);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        (vars.mathErr, vars.accountBorrowsNew) = addUInt(vars.accountBorrows, borrowAmount);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        // Check min borrow for this user for this asset
        allowed = comptroller.borrowWithinLimits(address(this), vars.accountBorrowsNew);
        if (allowed != 0) {
            return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.BORROW_COMPTROLLER_REJECTION, allowed);
        }

        (vars.mathErr, vars.totalBorrowsNew) = addUInt(totalBorrows, borrowAmount);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We invoke doTransferOut for the borrower and the borrowAmount.
         *  Note: The cToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the cToken borrowAmount less of cash.
         *  doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
         */
        doTransferOut(borrower, borrowAmount);

        /* We write the previously calculated values into storage */
        accountBorrows[borrower].principal = vars.accountBorrowsNew;
        accountBorrows[borrower].interestIndex = borrowIndex;
        totalBorrows = vars.totalBorrowsNew;

        /* We emit a Borrow event */
        emit Borrow(borrower, borrowAmount, vars.accountBorrowsNew, vars.totalBorrowsNew);

        /* We call the defense hook */
        // unused function
        // comptroller.borrowVerify(address(this), borrower, borrowAmount);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Sender repays their own borrow
     * @param repayAmount The amount to repay
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function repayBorrowInternal(uint repayAmount) internal nonReentrant(false) returns (uint, uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
            return (fail(Error(error), FailureInfo.REPAY_BORROW_ACCRUE_INTEREST_FAILED), 0);
        }
        // repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
        return repayBorrowFresh(msg.sender, msg.sender, repayAmount);
    }

    /**
     * @notice Sender repays a borrow belonging to borrower
     * @param borrower the account with the debt being payed off
     * @param repayAmount The amount to repay
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function repayBorrowBehalfInternal(address borrower, uint repayAmount) internal nonReentrant(false) returns (uint, uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
            return (fail(Error(error), FailureInfo.REPAY_BEHALF_ACCRUE_INTEREST_FAILED), 0);
        }
        // repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
        return repayBorrowFresh(msg.sender, borrower, repayAmount);
    }

    struct RepayBorrowLocalVars {
        Error err;
        MathError mathErr;
        uint repayAmount;
        uint borrowerIndex;
        uint accountBorrows;
        uint accountBorrowsNew;
        uint totalBorrowsNew;
        uint actualRepayAmount;
    }

    /**
     * @notice Borrows are repaid by another user (possibly the borrower).
     * @param payer the account paying off the borrow
     * @param borrower the account with the debt being payed off
     * @param repayAmount the amount of undelrying tokens being returned
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function repayBorrowFresh(address payer, address borrower, uint repayAmount) internal returns (uint, uint) {
        /* Fail if repayBorrow not allowed */
        uint allowed = comptroller.repayBorrowAllowed(address(this), payer, borrower, repayAmount);
        if (allowed != 0) {
            return (failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.REPAY_BORROW_COMPTROLLER_REJECTION, allowed), 0);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return (fail(Error.MARKET_NOT_FRESH, FailureInfo.REPAY_BORROW_FRESHNESS_CHECK), 0);
        }

        RepayBorrowLocalVars memory vars;

        /* We remember the original borrowerIndex for verification purposes */
        vars.borrowerIndex = accountBorrows[borrower].interestIndex;

        /* We fetch the amount the borrower owes, with accumulated interest */
        (vars.mathErr, vars.accountBorrows) = borrowBalanceStoredInternal(borrower);
        if (vars.mathErr != MathError.NO_ERROR) {
            return (failOpaque(Error.MATH_ERROR, FailureInfo.REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED, uint(vars.mathErr)), 0);
        }

        /* If repayAmount == -1, repayAmount = accountBorrows */
        if (repayAmount == uint(-1)) {
            vars.repayAmount = vars.accountBorrows;
        } else {
            vars.repayAmount = repayAmount;
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We call doTransferIn for the payer and the repayAmount
         *  Note: The cToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the cToken holds an additional repayAmount of cash.
         *  doTransferIn reverts if anything goes wrong, since we can't be sure if side effects occurred.
         *   it returns the amount actually transferred, in case of a fee.
         */
        vars.actualRepayAmount = doTransferIn(payer, vars.repayAmount);

        /*
         * We calculate the new borrower and total borrow balances, failing on underflow:
         *  accountBorrowsNew = accountBorrows - actualRepayAmount
         *  totalBorrowsNew = totalBorrows - actualRepayAmount
         */
        (vars.mathErr, vars.accountBorrowsNew) = subUInt(vars.accountBorrows, vars.actualRepayAmount);
        require(vars.mathErr == MathError.NO_ERROR, "REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED");

        (vars.mathErr, vars.totalBorrowsNew) = subUInt(totalBorrows, vars.actualRepayAmount);
        require(vars.mathErr == MathError.NO_ERROR, "REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED");

        /* We write the previously calculated values into storage */
        accountBorrows[borrower].principal = vars.accountBorrowsNew;
        accountBorrows[borrower].interestIndex = borrowIndex;
        totalBorrows = vars.totalBorrowsNew;

        /* We emit a RepayBorrow event */
        emit RepayBorrow(payer, borrower, vars.actualRepayAmount, vars.accountBorrowsNew, vars.totalBorrowsNew);

        /* We call the defense hook */
        // unused function
        // comptroller.repayBorrowVerify(address(this), payer, borrower, vars.actualRepayAmount, vars.borrowerIndex);

        return (uint(Error.NO_ERROR), vars.actualRepayAmount);
    }

    /**
     * @notice The sender liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this cToken to be liquidated
     * @param cTokenCollateral The market in which to seize collateral from the borrower
     * @param repayAmount The amount of the underlying borrowed asset to repay
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function liquidateBorrowInternal(address borrower, uint repayAmount, CTokenInterface cTokenCollateral) internal nonReentrant(false) returns (uint, uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted liquidation failed
            return (fail(Error(error), FailureInfo.LIQUIDATE_ACCRUE_BORROW_INTEREST_FAILED), 0);
        }

        error = cTokenCollateral.accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted liquidation failed
            return (fail(Error(error), FailureInfo.LIQUIDATE_ACCRUE_COLLATERAL_INTEREST_FAILED), 0);
        }

        // liquidateBorrowFresh emits borrow-specific logs on errors, so we don't need to
        return liquidateBorrowFresh(msg.sender, borrower, repayAmount, cTokenCollateral);
    }

    /**
     * @notice The liquidator liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this cToken to be liquidated
     * @param liquidator The address repaying the borrow and seizing collateral
     * @param cTokenCollateral The market in which to seize collateral from the borrower
     * @param repayAmount The amount of the underlying borrowed asset to repay
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function liquidateBorrowFresh(address liquidator, address borrower, uint repayAmount, CTokenInterface cTokenCollateral) internal returns (uint, uint) {
        /* Fail if liquidate not allowed */
        uint allowed = comptroller.liquidateBorrowAllowed(address(this), address(cTokenCollateral), liquidator, borrower, repayAmount);
        if (allowed != 0) {
            return (failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.LIQUIDATE_COMPTROLLER_REJECTION, allowed), 0);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            return (fail(Error.MARKET_NOT_FRESH, FailureInfo.LIQUIDATE_FRESHNESS_CHECK), 0);
        }

        /* Verify cTokenCollateral market's block number equals current block number */
        if (cTokenCollateral.accrualBlockNumber() != getBlockNumber()) {
            return (fail(Error.MARKET_NOT_FRESH, FailureInfo.LIQUIDATE_COLLATERAL_FRESHNESS_CHECK), 0);
        }

        /* Fail if borrower = liquidator */
        if (borrower == liquidator) {
            return (fail(Error.INVALID_ACCOUNT_PAIR, FailureInfo.LIQUIDATE_LIQUIDATOR_IS_BORROWER), 0);
        }

        /* Fail if repayAmount = 0 */
        if (repayAmount == 0) {
            return (fail(Error.INVALID_CLOSE_AMOUNT_REQUESTED, FailureInfo.LIQUIDATE_CLOSE_AMOUNT_IS_ZERO), 0);
        }

        /* Fail if repayAmount = -1 */
        if (repayAmount == uint(-1)) {
            return (fail(Error.INVALID_CLOSE_AMOUNT_REQUESTED, FailureInfo.LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX), 0);
        }


        /* Fail if repayBorrow fails */
        (uint repayBorrowError, uint actualRepayAmount) = repayBorrowFresh(liquidator, borrower, repayAmount);
        if (repayBorrowError != uint(Error.NO_ERROR)) {
            return (fail(Error(repayBorrowError), FailureInfo.LIQUIDATE_REPAY_BORROW_FRESH_FAILED), 0);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We calculate the number of collateral tokens that will be seized */
        (uint amountSeizeError, uint seizeTokens) = comptroller.liquidateCalculateSeizeTokens(address(this), address(cTokenCollateral), actualRepayAmount);
        require(amountSeizeError == uint(Error.NO_ERROR), "LIQUIDATE_COMPTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED");

        /* Revert if borrower collateral token balance < seizeTokens */
        require(cTokenCollateral.balanceOf(borrower) >= seizeTokens, "LIQUIDATE_SEIZE_TOO_MUCH");

        // If this is also the collateral, run seizeInternal to avoid re-entrancy, otherwise make an external call
        uint seizeError;
        if (address(cTokenCollateral) == address(this)) {
            seizeError = seizeInternal(address(this), liquidator, borrower, seizeTokens);
        } else {
            seizeError = cTokenCollateral.seize(liquidator, borrower, seizeTokens);
        }

        /* Revert if seize tokens fails (since we cannot be sure of side effects) */
        require(seizeError == uint(Error.NO_ERROR), "token seizure failed");

        /* We emit a LiquidateBorrow event */
        emit LiquidateBorrow(liquidator, borrower, actualRepayAmount, address(cTokenCollateral), seizeTokens);

        /* We call the defense hook */
        // unused function
        // comptroller.liquidateBorrowVerify(address(this), address(cTokenCollateral), liquidator, borrower, actualRepayAmount, seizeTokens);

        return (uint(Error.NO_ERROR), actualRepayAmount);
    }

    /**
     * @notice Transfers collateral tokens (this market) to the liquidator.
     * @dev Will fail unless called by another cToken during the process of liquidation.
     *  Its absolutely critical to use msg.sender as the borrowed cToken and not a parameter.
     * @param liquidator The account receiving seized collateral
     * @param borrower The account having collateral seized
     * @param seizeTokens The number of cTokens to seize
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function seize(address liquidator, address borrower, uint seizeTokens) external nonReentrant(true) returns (uint) {
        return seizeInternal(msg.sender, liquidator, borrower, seizeTokens);
    }

    struct SeizeInternalLocalVars {
        MathError mathErr;
        uint borrowerTokensNew;
        uint liquidatorTokensNew;
        uint liquidatorSeizeTokens;
        uint protocolSeizeTokens;
        uint protocolSeizeAmount;
        uint exchangeRateMantissa;
        uint totalReservesNew;
        uint totalSupplyNew;
    }

    /**
     * @notice Transfers collateral tokens (this market) to the liquidator.
     * @dev Called only during an in-kind liquidation, or by liquidateBorrow during the liquidation of another CToken.
     *  Its absolutely critical to use msg.sender as the seizer cToken and not a parameter.
     * @param seizerToken The contract seizing the collateral (i.e. borrowed cToken)
     * @param liquidator The account receiving seized collateral
     * @param borrower The account having collateral seized
     * @param seizeTokens The number of cTokens to seize
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function seizeInternal(address seizerToken, address liquidator, address borrower, uint seizeTokens) internal returns (uint) {
        /* Fail if seize not allowed */
        uint allowed = comptroller.seizeAllowed(address(this), seizerToken, liquidator, borrower, seizeTokens);
        if (allowed != 0) {
            return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.LIQUIDATE_SEIZE_COMPTROLLER_REJECTION, allowed);
        }

        /* Fail if borrower = liquidator */
        if (borrower == liquidator) {
            return fail(Error.INVALID_ACCOUNT_PAIR, FailureInfo.LIQUIDATE_SEIZE_LIQUIDATOR_IS_BORROWER);
        }

        SeizeInternalLocalVars memory vars;

        /*
         * We calculate the new borrower and liquidator token balances, failing on underflow/overflow:
         *  borrowerTokensNew = accountTokens[borrower] - seizeTokens
         *  liquidatorTokensNew = accountTokens[liquidator] + seizeTokens
         */
        (vars.mathErr, vars.borrowerTokensNew) = subUInt(accountTokens[borrower], seizeTokens);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.LIQUIDATE_SEIZE_BALANCE_DECREMENT_FAILED, uint(vars.mathErr));
        }

        vars.protocolSeizeTokens = mul_(seizeTokens, Exp({mantissa: protocolSeizeShareMantissa}));
        vars.liquidatorSeizeTokens = sub_(seizeTokens, vars.protocolSeizeTokens);

        (vars.mathErr, vars.exchangeRateMantissa) = exchangeRateStoredInternal();
        require(vars.mathErr == MathError.NO_ERROR, "exchange rate math error");

        vars.protocolSeizeAmount = mul_ScalarTruncate(Exp({mantissa: vars.exchangeRateMantissa}), vars.protocolSeizeTokens);

        vars.totalReservesNew = add_(totalReserves, vars.protocolSeizeAmount);
        vars.totalSupplyNew = sub_(totalSupply, vars.protocolSeizeTokens);

        (vars.mathErr, vars.liquidatorTokensNew) = addUInt(accountTokens[liquidator], vars.liquidatorSeizeTokens);
        if (vars.mathErr != MathError.NO_ERROR) {
            return failOpaque(Error.MATH_ERROR, FailureInfo.LIQUIDATE_SEIZE_BALANCE_INCREMENT_FAILED, uint(vars.mathErr));
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We write the previously calculated values into storage */
        totalReserves = vars.totalReservesNew;
        totalSupply = vars.totalSupplyNew;
        accountTokens[borrower] = vars.borrowerTokensNew;
        accountTokens[liquidator] = vars.liquidatorTokensNew;

        /* Emit a Transfer event */
        emit Transfer(borrower, liquidator, vars.liquidatorSeizeTokens);
        emit Transfer(borrower, address(this), vars.protocolSeizeTokens);
        emit ReservesAdded(address(this), vars.protocolSeizeAmount, vars.totalReservesNew);

        /* We call the defense hook */
        // unused function
        // comptroller.seizeVerify(address(this), seizerToken, liquidator, borrower, seizeTokens);

        return uint(Error.NO_ERROR);
    }


    /*** Admin Functions ***/

    /**
      * @notice Sets a new comptroller for the market
      * @dev Internal function to set a new comptroller
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setComptroller(ComptrollerInterface newComptroller) internal returns (uint) {
        ComptrollerInterface oldComptroller = comptroller;
        // Ensure invoke comptroller.isComptroller() returns true
        require(newComptroller.isComptroller(), "marker method returned false");

        // Set market's comptroller to newComptroller
        comptroller = newComptroller;

        // Emit NewComptroller(oldComptroller, newComptroller)
        emit NewComptroller(oldComptroller, newComptroller);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice accrues interest and sets a new admin fee for the protocol using _setAdminFeeFresh
      * @dev Admin function to accrue interest and set a new admin fee
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setAdminFee(uint newAdminFeeMantissa) external nonReentrant(false) returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted admin fee change failed.
            return fail(Error(error), FailureInfo.SET_ADMIN_FEE_ACCRUE_INTEREST_FAILED);
        }
        // _setAdminFeeFresh emits reserve-factor-specific logs on errors, so we don't need to.
        return _setAdminFeeFresh(newAdminFeeMantissa);
    }

    /**
      * @notice Sets a new admin fee for the protocol (*requires fresh interest accrual)
      * @dev Admin function to set a new admin fee
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setAdminFeeFresh(uint newAdminFeeMantissa) internal returns (uint) {
        // Verify market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_ADMIN_FEE_FRESH_CHECK);
        }

        // Sanitize newAdminFeeMantissa
        if (newAdminFeeMantissa == uint(-1)) newAdminFeeMantissa = adminFeeMantissa;

        // Get latest Fuse fee
        uint newFuseFeeMantissa = getPendingFuseFeeFromAdmin();

        // Check reserveFactorMantissa + newAdminFeeMantissa + newFuseFeeMantissa ≤ reserveFactorPlusFeesMaxMantissa
        if (add_(add_(reserveFactorMantissa, newAdminFeeMantissa), newFuseFeeMantissa) > reserveFactorPlusFeesMaxMantissa) {
            return fail(Error.BAD_INPUT, FailureInfo.SET_ADMIN_FEE_BOUNDS_CHECK);
        }

        // If setting admin fee
        if (adminFeeMantissa != newAdminFeeMantissa) {
            // Check caller is admin
            if (!hasAdminRights()) {
                return fail(Error.UNAUTHORIZED, FailureInfo.SET_ADMIN_FEE_ADMIN_CHECK);
            }

            // Set admin fee
            uint oldAdminFeeMantissa = adminFeeMantissa;
            adminFeeMantissa = newAdminFeeMantissa;

            // Emit event
            emit NewAdminFee(oldAdminFeeMantissa, newAdminFeeMantissa);
        }

        // If setting Fuse fee
        if (fuseFeeMantissa != newFuseFeeMantissa) {
            // Set Fuse fee
            uint oldFuseFeeMantissa = fuseFeeMantissa;
            fuseFeeMantissa = newFuseFeeMantissa;

            // Emit event
            emit NewFuseFee(oldFuseFeeMantissa, newFuseFeeMantissa);
        }

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice accrues interest and sets a new reserve factor for the protocol using _setReserveFactorFresh
      * @dev Admin function to accrue interest and set a new reserve factor
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setReserveFactor(uint newReserveFactorMantissa) external nonReentrant(false) returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted reserve factor change failed.
            return fail(Error(error), FailureInfo.SET_RESERVE_FACTOR_ACCRUE_INTEREST_FAILED);
        }
        // _setReserveFactorFresh emits reserve-factor-specific logs on errors, so we don't need to.
        return _setReserveFactorFresh(newReserveFactorMantissa);
    }

    /**
      * @notice Sets a new reserve factor for the protocol (*requires fresh interest accrual)
      * @dev Admin function to set a new reserve factor
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setReserveFactorFresh(uint newReserveFactorMantissa) internal returns (uint) {
        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_RESERVE_FACTOR_ADMIN_CHECK);
        }

        // Verify market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_RESERVE_FACTOR_FRESH_CHECK);
        }

        // Check newReserveFactor ≤ maxReserveFactor
        if (add_(add_(newReserveFactorMantissa, adminFeeMantissa), fuseFeeMantissa) > reserveFactorPlusFeesMaxMantissa) {
            return fail(Error.BAD_INPUT, FailureInfo.SET_RESERVE_FACTOR_BOUNDS_CHECK);
        }

        uint oldReserveFactorMantissa = reserveFactorMantissa;
        reserveFactorMantissa = newReserveFactorMantissa;

        emit NewReserveFactor(oldReserveFactorMantissa, newReserveFactorMantissa);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Accrues interest and reduces reserves by transferring to admin
     * @param reduceAmount Amount of reduction to reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _reduceReserves(uint reduceAmount) external nonReentrant(false) returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted reduce reserves failed.
            return fail(Error(error), FailureInfo.REDUCE_RESERVES_ACCRUE_INTEREST_FAILED);
        }
        // _reduceReservesFresh emits reserve-reduction-specific logs on errors, so we don't need to.
        return _reduceReservesFresh(reduceAmount);
    }

    /**
     * @notice Reduces reserves by transferring to admin
     * @dev Requires fresh interest accrual
     * @param reduceAmount Amount of reduction to reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _reduceReservesFresh(uint reduceAmount) internal returns (uint) {
        // totalReserves - reduceAmount
        uint totalReservesNew;

        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.REDUCE_RESERVES_ADMIN_CHECK);
        }

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.REDUCE_RESERVES_FRESH_CHECK);
        }

        // Fail gracefully if protocol has insufficient underlying cash
        if (getCashPrior() < reduceAmount) {
            return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.REDUCE_RESERVES_CASH_NOT_AVAILABLE);
        }

        // Check reduceAmount ≤ reserves[n] (totalReserves)
        if (reduceAmount > totalReserves) {
            return fail(Error.BAD_INPUT, FailureInfo.REDUCE_RESERVES_VALIDATION);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        // We checked reduceAmount <= totalReserves above, so this should never revert.
        totalReservesNew = sub_(totalReserves, reduceAmount);

        // Store reserves[n+1] = reserves[n] - reduceAmount
        totalReserves = totalReservesNew;

        // doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
        doTransferOut(msg.sender, reduceAmount);

        emit ReservesReduced(msg.sender, reduceAmount, totalReservesNew);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Accrues interest and reduces Fuse fees by transferring to Fuse
     * @param withdrawAmount Amount of fees to withdraw
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _withdrawFuseFees(uint withdrawAmount) external nonReentrant(false) returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted Fuse fee withdrawal failed.
            return fail(Error(error), FailureInfo.WITHDRAW_FUSE_FEES_ACCRUE_INTEREST_FAILED);
        }
        // _withdrawFuseFeesFresh emits reserve-reduction-specific logs on errors, so we don't need to.
        return _withdrawFuseFeesFresh(withdrawAmount);
    }

    /**
     * @notice Reduces Fuse fees by transferring to Fuse
     * @dev Requires fresh interest accrual
     * @param withdrawAmount Amount of fees to withdraw
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _withdrawFuseFeesFresh(uint withdrawAmount) internal returns (uint) {
        // totalFuseFees - reduceAmount
        uint totalFuseFeesNew;

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.WITHDRAW_FUSE_FEES_FRESH_CHECK);
        }

        // Fail gracefully if protocol has insufficient underlying cash
        if (getCashPrior() < withdrawAmount) {
            return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.WITHDRAW_FUSE_FEES_CASH_NOT_AVAILABLE);
        }

        // Check withdrawAmount ≤ fuseFees[n] (totalFuseFees)
        if (withdrawAmount > totalFuseFees) {
            return fail(Error.BAD_INPUT, FailureInfo.WITHDRAW_FUSE_FEES_VALIDATION);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        // We checked withdrawAmount <= totalFuseFees above, so this should never revert.
        totalFuseFeesNew = sub_(totalFuseFees, withdrawAmount);

        // Store fuseFees[n+1] = fuseFees[n] - withdrawAmount
        totalFuseFees = totalFuseFeesNew;

        // doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
        doTransferOut(address(fuseAdmin), withdrawAmount);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice Accrues interest and reduces admin fees by transferring to admin
     * @param withdrawAmount Amount of fees to withdraw
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _withdrawAdminFees(uint withdrawAmount) external nonReentrant(false) returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted admin fee withdrawal failed.
            return fail(Error(error), FailureInfo.WITHDRAW_ADMIN_FEES_ACCRUE_INTEREST_FAILED);
        }
        // _withdrawAdminFeesFresh emits reserve-reduction-specific logs on errors, so we don't need to.
        return _withdrawAdminFeesFresh(withdrawAmount);
    }

    /**
     * @notice Reduces admin fees by transferring to admin
     * @dev Requires fresh interest accrual
     * @param withdrawAmount Amount of fees to withdraw
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _withdrawAdminFeesFresh(uint withdrawAmount) internal returns (uint) {
        // totalAdminFees - reduceAmount
        uint totalAdminFeesNew;

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.WITHDRAW_ADMIN_FEES_FRESH_CHECK);
        }

        // Fail gracefully if protocol has insufficient underlying cash
        if (getCashPrior() < withdrawAmount) {
            return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.WITHDRAW_ADMIN_FEES_CASH_NOT_AVAILABLE);
        }

        // Check withdrawAmount ≤ adminFees[n] (totalAdminFees)
        if (withdrawAmount > totalAdminFees) {
            return fail(Error.BAD_INPUT, FailureInfo.WITHDRAW_ADMIN_FEES_VALIDATION);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        // We checked withdrawAmount <= totalAdminFees above, so this should never revert.
        totalAdminFeesNew = sub_(totalAdminFees, withdrawAmount);

        // Store adminFees[n+1] = adminFees[n] - withdrawAmount
        totalAdminFees = totalAdminFeesNew;

        // doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
        doTransferOut(address(uint160(UnitrollerAdminStorage(address(comptroller)).admin())), withdrawAmount);

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice accrues interest and updates the interest rate model using _setInterestRateModelFresh
     * @dev Admin function to accrue interest and update the interest rate model
     * @param newInterestRateModel the new interest rate model to use
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint) {
        uint error = accrueInterest();
        if (error != uint(Error.NO_ERROR)) {
            // accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted change of interest rate model failed
            return fail(Error(error), FailureInfo.SET_INTEREST_RATE_MODEL_ACCRUE_INTEREST_FAILED);
        }
        // _setInterestRateModelFresh emits interest-rate-model-update-specific logs on errors, so we don't need to.
        return _setInterestRateModelFresh(newInterestRateModel);
    }

    /**
     * @notice updates the interest rate model (*requires fresh interest accrual)
     * @dev Admin function to update the interest rate model
     * @param newInterestRateModel the new interest rate model to use
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setInterestRateModelFresh(InterestRateModel newInterestRateModel) internal returns (uint) {
        // Used to store old model for use in the event that is emitted on success
        InterestRateModel oldInterestRateModel;

        // Check caller is admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_INTEREST_RATE_MODEL_OWNER_CHECK);
        }

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_INTEREST_RATE_MODEL_FRESH_CHECK);
        }

        // Track the market's current interest rate model
        oldInterestRateModel = interestRateModel;

        // Ensure invoke newInterestRateModel.isInterestRateModel() returns true
        require(newInterestRateModel.isInterestRateModel(), "marker method returned false");

        // Set the interest rate model to newInterestRateModel
        interestRateModel = newInterestRateModel;

        // Emit NewMarketInterestRateModel(oldInterestRateModel, newInterestRateModel)
        emit NewMarketInterestRateModel(oldInterestRateModel, newInterestRateModel);

        // Attempt to reset interest checkpoints on old IRM
        if (address(oldInterestRateModel) != address(0)) address(oldInterestRateModel).call(abi.encodeWithSignature("resetInterestCheckpoints()"));

        // Attempt to add first interest checkpoint on new IRM
        address(newInterestRateModel).call(abi.encodeWithSignature("checkpointInterest()"));

        return uint(Error.NO_ERROR);
    }

    /**
     * @notice updates the cToken ERC20 name and symbol
     * @dev Admin function to update the cToken ERC20 name and symbol
     * @param _name the new ERC20 token name to use
     * @param _symbol the new ERC20 token symbol to use
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setNameAndSymbol(string calldata _name, string calldata _symbol) external {
        // Check caller is admin
        require(hasAdminRights(), "caller not admin");

        // Set ERC20 name and symbol
        name = _name;
        symbol = _symbol;
    }

    /*** Safe Token ***/

    /**
     * @notice Gets balance of this contract in terms of the underlying
     * @dev This excludes the value of the current message, if any
     * @return The quantity of underlying owned by this contract
     */
    function getCashPrior() internal view returns (uint);

    /**
     * @dev Performs a transfer in, reverting upon failure. Returns the amount actually transferred to the protocol, in case of a fee.
     *  This may revert due to insufficient balance or insufficient allowance.
     */
    function doTransferIn(address from, uint amount) internal returns (uint);

    /**
     * @dev Performs a transfer out, ideally returning an explanatory error code upon failure tather than reverting.
     *  If caller has not called checked protocol's balance, may revert due to insufficient cash held in the contract.
     *  If caller has checked protocol's balance, and verified it is >= amount, this should not revert in normal conditions.
     */
    function doTransferOut(address payable to, uint amount) internal;


    /*** Reentrancy Guard ***/

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     */
    modifier nonReentrant(bool localOnly) {
        _beforeNonReentrant(localOnly);
        _;
        _afterNonReentrant(localOnly);
    }

    /**
     * @dev Split off from `nonReentrant` to keep contract below the 24 KB size limit.
     * Saves space because function modifier code is "inlined" into every function with the modifier).
     * In this specific case, the optimization saves around 1500 bytes of that valuable 24 KB limit.
     */
    function _beforeNonReentrant(bool localOnly) private {
        require(_notEntered, "re-entered");
        if (!localOnly) comptroller._beforeNonReentrant();
        _notEntered = false;
    }

    /**
     * @dev Split off from `nonReentrant` to keep contract below the 24 KB size limit.
     * Saves space because function modifier code is "inlined" into every function with the modifier).
     * In this specific case, the optimization saves around 150 bytes of that valuable 24 KB limit.
     */
    function _afterNonReentrant(bool localOnly) private {
        _notEntered = true; // get a gas-refund post-Istanbul
        if (!localOnly) comptroller._afterNonReentrant();
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     * @param data The call data (encoded using abi.encode or one of its variants).
     * @param errorMessage The revert string to return on failure.
     */
    function _functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.call(data);

        if (!success) {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }

        return returndata;
    }
}

File 12 of 28: CTokenInterfaces.sol
pragma solidity ^0.5.16;

import "./IFuseFeeDistributor.sol";
import "./ComptrollerStorage.sol";
import "./ComptrollerInterface.sol";
import "./InterestRateModel.sol";

contract CTokenAdminStorage {
    /**
     * @notice Administrator for Fuse
     */
    IFuseFeeDistributor internal constant fuseAdmin = IFuseFeeDistributor(0x4AFB2B3DC111D091ca6C46C024d1d2f17BF477e1);

    /**
     * @dev LEGACY USE ONLY: Administrator for this contract
     */
    address payable internal __admin;

    /**
     * @dev LEGACY USE ONLY: Whether or not the Fuse admin has admin rights
     */
    bool internal __fuseAdminHasRights;

    /**
     * @dev LEGACY USE ONLY: Whether or not the admin has admin rights
     */
    bool internal __adminHasRights;
}

contract CTokenStorage is CTokenAdminStorage {
    /**
     * @dev Guard variable for re-entrancy checks
     */
    bool internal _notEntered;

    /**
     * @notice EIP-20 token name for this token
     */
    string public name;

    /**
     * @notice EIP-20 token symbol for this token
     */
    string public symbol;

    /**
     * @notice EIP-20 token decimals for this token
     */
    uint8 public decimals;

    /**
     * @notice Maximum borrow rate that can ever be applied (.0005% / block)
     */
    uint internal constant borrowRateMaxMantissa = 0.0005e16;

    /**
     * @notice Maximum fraction of interest that can be set aside for reserves + fees
     */
    uint internal constant reserveFactorPlusFeesMaxMantissa = 1e18;

    /**
     * @notice LEGACY USE ONLY: Pending administrator for this contract
     */
    address payable private __pendingAdmin;

    /**
     * @notice Contract which oversees inter-cToken operations
     */
    ComptrollerInterface public comptroller;

    /**
     * @notice Model which tells what the current interest rate should be
     */
    InterestRateModel public interestRateModel;

    /**
     * @notice Initial exchange rate used when minting the first CTokens (used when totalSupply = 0)
     */
    uint internal initialExchangeRateMantissa;

    /**
     * @notice Fraction of interest currently set aside for admin fees
     */
    uint public adminFeeMantissa;

    /**
     * @notice Fraction of interest currently set aside for Fuse fees
     */
    uint public fuseFeeMantissa;

    /**
     * @notice Fraction of interest currently set aside for reserves
     */
    uint public reserveFactorMantissa;

    /**
     * @notice Block number that interest was last accrued at
     */
    uint public accrualBlockNumber;

    /**
     * @notice Accumulator of the total earned interest rate since the opening of the market
     */
    uint public borrowIndex;

    /**
     * @notice Total amount of outstanding borrows of the underlying in this market
     */
    uint public totalBorrows;

    /**
     * @notice Total amount of reserves of the underlying held in this market
     */
    uint public totalReserves;

    /**
     * @notice Total amount of admin fees of the underlying held in this market
     */
    uint public totalAdminFees;

    /**
     * @notice Total amount of Fuse fees of the underlying held in this market
     */
    uint public totalFuseFees;

    /**
     * @notice Total number of tokens in circulation
     */
    uint public totalSupply;

    /**
     * @notice Official record of token balances for each account
     */
    mapping (address => uint) internal accountTokens;

    /**
     * @notice Approved token transfer amounts on behalf of others
     */
    mapping (address => mapping (address => uint)) internal transferAllowances;

    /**
     * @notice Container for borrow balance information
     * @member principal Total balance (with accrued interest), after applying the most recent balance-changing action
     * @member interestIndex Global borrowIndex as of the most recent balance-changing action
     */
    struct BorrowSnapshot {
        uint principal;
        uint interestIndex;
    }

    /**
     * @notice Mapping of account addresses to outstanding borrow balances
     */
    mapping(address => BorrowSnapshot) internal accountBorrows;

    /**
     * @notice Share of seized collateral that is added to reserves
     */
    uint public constant protocolSeizeShareMantissa = 2.8e16; //2.8%
}

contract CTokenInterface is CTokenStorage {
    /**
     * @notice Indicator that this is a CToken contract (for inspection)
     */
    bool public constant isCToken = true;

    /**
     * @notice Indicator that this is or is not a CEther contract (for inspection)
     */
    bool public constant isCEther = false;

    /*** Market Events ***/

    /**
     * @notice Event emitted when interest is accrued
     */
    event AccrueInterest(uint cashPrior, uint interestAccumulated, uint borrowIndex, uint totalBorrows);

    /**
     * @notice Event emitted when tokens are minted
     */
    event Mint(address minter, uint mintAmount, uint mintTokens);

    /**
     * @notice Event emitted when tokens are redeemed
     */
    event Redeem(address redeemer, uint redeemAmount, uint redeemTokens);

    /**
     * @notice Event emitted when underlying is borrowed
     */
    event Borrow(address borrower, uint borrowAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is repaid
     */
    event RepayBorrow(address payer, address borrower, uint repayAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is liquidated
     */
    event LiquidateBorrow(address liquidator, address borrower, uint repayAmount, address cTokenCollateral, uint seizeTokens);


    /*** Admin Events ***/

    /**
     * @notice Event emitted when comptroller is changed
     */
    event NewComptroller(ComptrollerInterface oldComptroller, ComptrollerInterface newComptroller);

    /**
     * @notice Event emitted when interestRateModel is changed
     */
    event NewMarketInterestRateModel(InterestRateModel oldInterestRateModel, InterestRateModel newInterestRateModel);

    /**
     * @notice Event emitted when the reserve factor is changed
     */
    event NewReserveFactor(uint oldReserveFactorMantissa, uint newReserveFactorMantissa);

    /**
     * @notice Event emitted when the reserves are added
     */
    event ReservesAdded(address benefactor, uint addAmount, uint newTotalReserves);

    /**
     * @notice Event emitted when the reserves are reduced
     */
    event ReservesReduced(address admin, uint reduceAmount, uint newTotalReserves);

    /**
     * @notice Event emitted when the admin fee is changed
     */
    event NewAdminFee(uint oldAdminFeeMantissa, uint newAdminFeeMantissa);

    /**
     * @notice Event emitted when the Fuse fee is changed
     */
    event NewFuseFee(uint oldFuseFeeMantissa, uint newFuseFeeMantissa);

    /**
     * @notice EIP20 Transfer event
     */
    event Transfer(address indexed from, address indexed to, uint amount);

    /**
     * @notice EIP20 Approval event
     */
    event Approval(address indexed owner, address indexed spender, uint amount);

    /**
     * @notice Failure event
     */
    event Failure(uint error, uint info, uint detail);


    /*** User Interface ***/

    function transfer(address dst, uint amount) external returns (bool);
    function transferFrom(address src, address dst, uint amount) external returns (bool);
    function approve(address spender, uint amount) external returns (bool);
    function allowance(address owner, address spender) external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function balanceOfUnderlying(address owner) external returns (uint);
    function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint);
    function borrowRatePerBlock() external view returns (uint);
    function supplyRatePerBlock() external view returns (uint);
    function totalBorrowsCurrent() external returns (uint);
    function borrowBalanceCurrent(address account) external returns (uint);
    function borrowBalanceStored(address account) public view returns (uint);
    function exchangeRateCurrent() public returns (uint);
    function exchangeRateStored() public view returns (uint);
    function getCash() external view returns (uint);
    function accrueInterest() public returns (uint);
    function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint);


    /*** Admin Functions ***/

    function _setReserveFactor(uint newReserveFactorMantissa) external returns (uint);
    function _reduceReserves(uint reduceAmount) external returns (uint);
    function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint);
}

contract CErc20Storage {
    /**
     * @notice Underlying asset for this CToken
     */
    address public underlying;
}

contract CErc20Interface is CErc20Storage {

    /*** User Interface ***/

    function mint(uint mintAmount) external returns (uint);
    function redeem(uint redeemTokens) external returns (uint);
    function redeemUnderlying(uint redeemAmount) external returns (uint);
    function borrow(uint borrowAmount) external returns (uint);
    function repayBorrow(uint repayAmount) external returns (uint);
    function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint);
    function liquidateBorrow(address borrower, uint repayAmount, CTokenInterface cTokenCollateral) external returns (uint);

}

contract CEtherInterface is CErc20Storage {
    /**
     * @notice Indicator that this is a CEther contract (for inspection)
     */
    bool public constant isCEther = true;
}

contract CDelegationStorage {
    /**
     * @notice Implementation address for this contract
     */
    address public implementation;
}

contract CDelegateInterface is CDelegationStorage {
    /**
     * @notice Emitted when implementation is changed
     */
    event NewImplementation(address oldImplementation, address newImplementation);

    /**
     * @notice Called by the admin to update the implementation of the delegator
     * @param implementation_ The address of the new implementation for delegation
     * @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
     * @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
     */
    function _setImplementationSafe(address implementation_, bool allowResign, bytes calldata becomeImplementationData) external;

    /**
     * @notice Called by the delegator on a delegate to initialize it for duty
     * @dev Should revert if any issues arise which make it unfit for delegation
     * @param data The encoded bytes data for any initialization
     */
    function _becomeImplementation(bytes calldata data) external;

    /**
     * @notice Function called before all delegator functions
     * @dev Checks comptroller.autoImplementation and upgrades the implementation if necessary
     */
    function _prepare() external payable;
}

File 13 of 28: DAIInterestRateModelV2.sol
pragma solidity ^0.5.16;

import "./JumpRateModel.sol";
import "./SafeMath.sol";

/**
  * @title Compound's DAIInterestRateModel Contract (version 2)
  * @author Compound (modified by Dharma Labs)
  * @notice The parameterized model described in section 2.4 of the original Compound Protocol whitepaper.
  * Version 2 modifies the original interest rate model by increasing the "gap" or slope of the model prior
  * to the "kink" from 0.05% to 2% with the goal of "smoothing out" interest rate changes as the utilization
  * rate increases.
  */
contract DAIInterestRateModelV2 is JumpRateModel {
    using SafeMath for uint;

    /**
     * @notice The additional margin per block separating the base borrow rate from the roof (2% / block).
     * Note that this value has been increased from the original value of 0.05% per block.
     */
    uint public constant gapPerBlock = 2e16 / blocksPerYear;

    /**
     * @notice The assumed (1 - reserve factor) used to calculate the minimum borrow rate (reserve factor = 0.05)
     */
    uint public constant assumedOneMinusReserveFactorMantissa = 0.95e18;

    PotLike pot;
    JugLike jug;

    /**
     * @notice Construct an interest rate model
     * @param jumpMultiplierPerYear The multiplierPerBlock after hitting a specified utilization point
     * @param kink_ The utilization point at which the jump multiplier is applied
     * @param pot_ The address of the Dai pot (where DSR is earned)
     * @param jug_ The address of the Dai jug (where SF is kept)
     */
    constructor(uint jumpMultiplierPerYear, uint kink_, address pot_, address jug_) JumpRateModel(0, 0, jumpMultiplierPerYear, kink_) public {
        pot = PotLike(pot_);
        jug = JugLike(jug_);
        poke();
    }

    /**
     * @notice Calculates the current supply interest rate per block including the Dai savings rate
     * @param cash The total amount of cash the market has
     * @param borrows The total amount of borrows the market has outstanding
     * @param reserves The total amnount of reserves the market has
     * @param reserveFactorMantissa The current reserve factor the market has
     * @return The supply rate per block (as a percentage, and scaled by 1e18)
     */
    function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) public view returns (uint) {
        uint protocolRate = super.getSupplyRate(cash, borrows, reserves, reserveFactorMantissa);

        uint underlying = cash.add(borrows).sub(reserves);
        if (underlying == 0) {
            return protocolRate;
        } else {
            uint cashRate = cash.mul(dsrPerBlock()).div(underlying);
            return cashRate.add(protocolRate);
        }
    }

    /**
     * @notice Calculates the Dai savings rate per block
     * @return The Dai savings rate per block (as a percentage, and scaled by 1e18)
     */
    function dsrPerBlock() public view returns (uint) {
        return pot
            .dsr().sub(1e27)  // scaled 1e27 aka RAY, and includes an extra "ONE" before subraction
            .div(1e9) // descale to 1e18
            .mul(15); // 15 seconds per block
    }

    /**
     * @notice Resets the baseRate and multiplier per block based on the stability fee and Dai savings rate
     */
    function poke() public {
        (uint duty, ) = jug.ilks("ETH-A");
        uint stabilityFeePerBlock = duty.add(jug.base()).sub(1e27).mul(1e18).div(1e27).mul(15);

        // We ensure the minimum borrow rate >= DSR / (1 - reserve factor)
        baseRatePerBlock = dsrPerBlock().mul(1e18).div(assumedOneMinusReserveFactorMantissa);

        // The roof borrow rate is max(base rate, stability fee) + gap, from which we derive the slope
        if (baseRatePerBlock < stabilityFeePerBlock) {
            multiplierPerBlock = stabilityFeePerBlock.sub(baseRatePerBlock).add(gapPerBlock).mul(1e18).div(kink);
        } else {
            multiplierPerBlock = gapPerBlock.mul(1e18).div(kink);
        }

        emit NewInterestParams(baseRatePerBlock, multiplierPerBlock, jumpMultiplierPerBlock, kink);
    }
}


/*** Maker Interfaces ***/

contract PotLike {
    function chi() external view returns (uint);
    function dsr() external view returns (uint);
    function rho() external view returns (uint);
    function pie(address) external view returns (uint);
    function drip() external returns (uint);
    function join(uint) external;
    function exit(uint) external;
}

contract JugLike {
    // --- Data ---
    struct Ilk {
        uint256 duty;
        uint256  rho;
    }

   mapping (bytes32 => Ilk) public ilks;
   uint256 public base;
}

File 14 of 28: EIP20Interface.sol
pragma solidity ^0.5.16;

/**
 * @title ERC 20 Token Standard Interface
 *  https://eips.ethereum.org/EIPS/eip-20
 */
interface EIP20Interface {
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);

    /**
      * @notice Get the total number of tokens in circulation
      * @return The supply of tokens
      */
    function totalSupply() external view returns (uint256);

    /**
     * @notice Gets the balance of the specified address
     * @param owner The address from which the balance will be retrieved
     * @return The balance
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
      * @notice Transfer `amount` tokens from `msg.sender` to `dst`
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return Whether or not the transfer succeeded
      */
    function transfer(address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Transfer `amount` tokens from `src` to `dst`
      * @param src The address of the source account
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return Whether or not the transfer succeeded
      */
    function transferFrom(address src, address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Approve `spender` to transfer up to `amount` from `src`
      * @dev This will overwrite the approval amount for `spender`
      *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
      * @param spender The address of the account which may transfer tokens
      * @param amount The number of tokens that are approved (-1 means infinite)
      * @return Whether or not the approval succeeded
      */
    function approve(address spender, uint256 amount) external returns (bool success);

    /**
      * @notice Get the current allowance from `owner` for `spender`
      * @param owner The address of the account which owns the tokens to be spent
      * @param spender The address of the account which may transfer tokens
      * @return The number of tokens allowed to be spent (-1 means infinite)
      */
    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}

File 15 of 28: EIP20NonStandardInterface.sol
pragma solidity ^0.5.16;

/**
 * @title EIP20NonStandardInterface
 * @dev Version of ERC20 with no return values for `transfer` and `transferFrom`
 *  See https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
 */
interface EIP20NonStandardInterface {

    /**
     * @notice Get the total number of tokens in circulation
     * @return The supply of tokens
     */
    function totalSupply() external view returns (uint256);

    /**
     * @notice Gets the balance of the specified address
     * @param owner The address from which the balance will be retrieved
     * @return The balance
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    ///
    /// !!!!!!!!!!!!!!
    /// !!! NOTICE !!! `transfer` does not return a value, in violation of the ERC-20 specification
    /// !!!!!!!!!!!!!!
    ///

    /**
      * @notice Transfer `amount` tokens from `msg.sender` to `dst`
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      */
    function transfer(address dst, uint256 amount) external;

    ///
    /// !!!!!!!!!!!!!!
    /// !!! NOTICE !!! `transferFrom` does not return a value, in violation of the ERC-20 specification
    /// !!!!!!!!!!!!!!
    ///

    /**
      * @notice Transfer `amount` tokens from `src` to `dst`
      * @param src The address of the source account
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      */
    function transferFrom(address src, address dst, uint256 amount) external;

    /**
      * @notice Approve `spender` to transfer up to `amount` from `src`
      * @dev This will overwrite the approval amount for `spender`
      *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
      * @param spender The address of the account which may transfer tokens
      * @param amount The number of tokens that are approved
      * @return Whether or not the approval succeeded
      */
    function approve(address spender, uint256 amount) external returns (bool success);

    /**
      * @notice Get the current allowance from `owner` for `spender`
      * @param owner The address of the account which owns the tokens to be spent
      * @param spender The address of the account which may transfer tokens
      * @return The number of tokens allowed to be spent
      */
    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}

File 16 of 28: ErrorReporter.sol
pragma solidity ^0.5.16;

contract ComptrollerErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        COMPTROLLER_MISMATCH,
        INSUFFICIENT_SHORTFALL,
        INSUFFICIENT_LIQUIDITY,
        INVALID_CLOSE_FACTOR,
        INVALID_COLLATERAL_FACTOR,
        INVALID_LIQUIDATION_INCENTIVE,
        MARKET_NOT_ENTERED, // no longer possible
        MARKET_NOT_LISTED,
        MARKET_ALREADY_LISTED,
        MATH_ERROR,
        NONZERO_BORROW_BALANCE,
        PRICE_ERROR,
        REJECTION,
        SNAPSHOT_ERROR,
        TOO_MANY_ASSETS,
        TOO_MUCH_REPAY,
        SUPPLIER_NOT_WHITELISTED,
        BORROW_BELOW_MIN,
        SUPPLY_ABOVE_MAX,
        NONZERO_TOTAL_SUPPLY
    }

    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK,
        ADD_REWARDS_DISTRIBUTOR_OWNER_CHECK,
        EXIT_MARKET_BALANCE_OWED,
        EXIT_MARKET_REJECTION,
        TOGGLE_ADMIN_RIGHTS_OWNER_CHECK,
        TOGGLE_AUTO_IMPLEMENTATIONS_ENABLED_OWNER_CHECK,
        SET_CLOSE_FACTOR_OWNER_CHECK,
        SET_CLOSE_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_NO_EXISTS,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_WITHOUT_PRICE,
        SET_LIQUIDATION_INCENTIVE_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_VALIDATION,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_PENDING_IMPLEMENTATION_CONTRACT_CHECK,
        SET_PENDING_IMPLEMENTATION_OWNER_CHECK,
        SET_PRICE_ORACLE_OWNER_CHECK,
        SET_WHITELIST_ENFORCEMENT_OWNER_CHECK,
        SET_WHITELIST_STATUS_OWNER_CHECK,
        SUPPORT_MARKET_EXISTS,
        SUPPORT_MARKET_OWNER_CHECK,
        SET_PAUSE_GUARDIAN_OWNER_CHECK,
        UNSUPPORT_MARKET_OWNER_CHECK,
        UNSUPPORT_MARKET_DOES_NOT_EXIST,
        UNSUPPORT_MARKET_IN_USE
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    /**
      * @dev use this when reporting an opaque error from an upgradeable collaborator contract
      */
    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
}

contract TokenErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        BAD_INPUT,
        COMPTROLLER_REJECTION,
        COMPTROLLER_CALCULATION_ERROR,
        INTEREST_RATE_MODEL_ERROR,
        INVALID_ACCOUNT_PAIR,
        INVALID_CLOSE_AMOUNT_REQUESTED,
        INVALID_COLLATERAL_FACTOR,
        MATH_ERROR,
        MARKET_NOT_FRESH,
        MARKET_NOT_LISTED,
        TOKEN_INSUFFICIENT_ALLOWANCE,
        TOKEN_INSUFFICIENT_BALANCE,
        TOKEN_INSUFFICIENT_CASH,
        TOKEN_TRANSFER_IN_FAILED,
        TOKEN_TRANSFER_OUT_FAILED,
        UTILIZATION_ABOVE_MAX
    }

    /*
     * Note: FailureInfo (but not Error) is kept in alphabetical order
     *       This is because FailureInfo grows significantly faster, and
     *       the order of Error has some meaning, while the order of FailureInfo
     *       is entirely arbitrary.
     */
    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCRUE_INTEREST_ACCUMULATED_INTEREST_CALCULATION_FAILED,
        ACCRUE_INTEREST_BORROW_RATE_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_BORROW_INDEX_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_BORROWS_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_RESERVES_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_FUSE_FEES_CALCULATION_FAILED,
        ACCRUE_INTEREST_NEW_TOTAL_ADMIN_FEES_CALCULATION_FAILED,
        ACCRUE_INTEREST_SIMPLE_INTEREST_FACTOR_CALCULATION_FAILED,
        BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        BORROW_ACCRUE_INTEREST_FAILED,
        BORROW_CASH_NOT_AVAILABLE,
        BORROW_FRESHNESS_CHECK,
        BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        BORROW_MARKET_NOT_LISTED,
        BORROW_COMPTROLLER_REJECTION,
        LIQUIDATE_ACCRUE_BORROW_INTEREST_FAILED,
        LIQUIDATE_ACCRUE_COLLATERAL_INTEREST_FAILED,
        LIQUIDATE_COLLATERAL_FRESHNESS_CHECK,
        LIQUIDATE_COMPTROLLER_REJECTION,
        LIQUIDATE_COMPTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED,
        LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX,
        LIQUIDATE_CLOSE_AMOUNT_IS_ZERO,
        LIQUIDATE_FRESHNESS_CHECK,
        LIQUIDATE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_REPAY_BORROW_FRESH_FAILED,
        LIQUIDATE_SEIZE_BALANCE_INCREMENT_FAILED,
        LIQUIDATE_SEIZE_BALANCE_DECREMENT_FAILED,
        LIQUIDATE_SEIZE_COMPTROLLER_REJECTION,
        LIQUIDATE_SEIZE_LIQUIDATOR_IS_BORROWER,
        LIQUIDATE_SEIZE_TOO_MUCH,
        MINT_ACCRUE_INTEREST_FAILED,
        MINT_COMPTROLLER_REJECTION,
        MINT_EXCHANGE_CALCULATION_FAILED,
        MINT_EXCHANGE_RATE_READ_FAILED,
        MINT_FRESHNESS_CHECK,
        MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        MINT_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        MINT_TRANSFER_IN_FAILED,
        MINT_TRANSFER_IN_NOT_POSSIBLE,
        NEW_UTILIZATION_RATE_ABOVE_MAX,
        REDEEM_ACCRUE_INTEREST_FAILED,
        REDEEM_COMPTROLLER_REJECTION,
        REDEEM_EXCHANGE_TOKENS_CALCULATION_FAILED,
        REDEEM_EXCHANGE_AMOUNT_CALCULATION_FAILED,
        REDEEM_EXCHANGE_RATE_READ_FAILED,
        REDEEM_FRESHNESS_CHECK,
        REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
        REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
        REDEEM_TRANSFER_OUT_NOT_POSSIBLE,
        WITHDRAW_FUSE_FEES_ACCRUE_INTEREST_FAILED,
        WITHDRAW_FUSE_FEES_CASH_NOT_AVAILABLE,
        WITHDRAW_FUSE_FEES_FRESH_CHECK,
        WITHDRAW_FUSE_FEES_VALIDATION,
        WITHDRAW_ADMIN_FEES_ACCRUE_INTEREST_FAILED,
        WITHDRAW_ADMIN_FEES_CASH_NOT_AVAILABLE,
        WITHDRAW_ADMIN_FEES_FRESH_CHECK,
        WITHDRAW_ADMIN_FEES_VALIDATION,
        REDUCE_RESERVES_ACCRUE_INTEREST_FAILED,
        REDUCE_RESERVES_ADMIN_CHECK,
        REDUCE_RESERVES_CASH_NOT_AVAILABLE,
        REDUCE_RESERVES_FRESH_CHECK,
        REDUCE_RESERVES_VALIDATION,
        REPAY_BEHALF_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCRUE_INTEREST_FAILED,
        REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_COMPTROLLER_REJECTION,
        REPAY_BORROW_FRESHNESS_CHECK,
        REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
        REPAY_BORROW_TRANSFER_IN_NOT_POSSIBLE,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_COMPTROLLER_OWNER_CHECK,
        SET_INTEREST_RATE_MODEL_ACCRUE_INTEREST_FAILED,
        SET_INTEREST_RATE_MODEL_FRESH_CHECK,
        SET_INTEREST_RATE_MODEL_OWNER_CHECK,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_ORACLE_MARKET_NOT_LISTED,
        TOGGLE_ADMIN_RIGHTS_OWNER_CHECK,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_ADMIN_FEE_ACCRUE_INTEREST_FAILED,
        SET_ADMIN_FEE_ADMIN_CHECK,
        SET_ADMIN_FEE_FRESH_CHECK,
        SET_ADMIN_FEE_BOUNDS_CHECK,
        SET_FUSE_FEE_ACCRUE_INTEREST_FAILED,
        SET_FUSE_FEE_FRESH_CHECK,
        SET_FUSE_FEE_BOUNDS_CHECK,
        SET_RESERVE_FACTOR_ACCRUE_INTEREST_FAILED,
        SET_RESERVE_FACTOR_ADMIN_CHECK,
        SET_RESERVE_FACTOR_FRESH_CHECK,
        SET_RESERVE_FACTOR_BOUNDS_CHECK,
        TRANSFER_COMPTROLLER_REJECTION,
        TRANSFER_NOT_ALLOWED,
        TRANSFER_NOT_ENOUGH,
        TRANSFER_TOO_MUCH,
        ADD_RESERVES_ACCRUE_INTEREST_FAILED,
        ADD_RESERVES_FRESH_CHECK,
        ADD_RESERVES_TRANSFER_IN_NOT_POSSIBLE
    }

    /**
      * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
      * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
      **/
    event Failure(uint error, uint info, uint detail);

    /**
      * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
      */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    /**
      * @dev use this when reporting an opaque error from an upgradeable collaborator contract
      */
    function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return err == Error.COMPTROLLER_REJECTION ? 1000 + opaqueError : uint(err);
    }
}

File 17 of 28: Exponential.sol
pragma solidity ^0.5.16;

import "./CarefulMath.sol";
import "./ExponentialNoError.sol";

/**
 * @title Exponential module for storing fixed-precision decimals
 * @author Compound
 * @dev Legacy contract for compatibility reasons with existing contracts that still use MathError
 * @notice Exp is a struct which stores decimals with a fixed precision of 18 decimal places.
 *         Thus, if we wanted to store the 5.1, mantissa would store 5.1e18. That is:
 *         `Exp({mantissa: 5100000000000000000})`.
 */
contract Exponential is CarefulMath, ExponentialNoError {
    /**
     * @dev Creates an exponential from numerator and denominator values.
     *      Note: Returns an error if (`num` * 10e18) > MAX_INT,
     *            or if `denom` is zero.
     */
    function getExp(uint num, uint denom) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint scaledNumerator) = mulUInt(num, expScale);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        (MathError err1, uint rational) = divUInt(scaledNumerator, denom);
        if (err1 != MathError.NO_ERROR) {
            return (err1, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: rational}));
    }

    /**
     * @dev Adds two exponentials, returning a new exponential.
     */
    function addExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        (MathError error, uint result) = addUInt(a.mantissa, b.mantissa);

        return (error, Exp({mantissa: result}));
    }

    /**
     * @dev Subtracts two exponentials, returning a new exponential.
     */
    function subExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        (MathError error, uint result) = subUInt(a.mantissa, b.mantissa);

        return (error, Exp({mantissa: result}));
    }

    /**
     * @dev Multiply an Exp by a scalar, returning a new Exp.
     */
    function mulScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint scaledMantissa) = mulUInt(a.mantissa, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: scaledMantissa}));
    }

    /**
     * @dev Multiply an Exp by a scalar, then truncate to return an unsigned integer.
     */
    function mulScalarTruncate(Exp memory a, uint scalar) pure internal returns (MathError, uint) {
        (MathError err, Exp memory product) = mulScalar(a, scalar);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return (MathError.NO_ERROR, truncate(product));
    }

    /**
     * @dev Multiply an Exp by a scalar, truncate, then add an to an unsigned integer, returning an unsigned integer.
     */
    function mulScalarTruncateAddUInt(Exp memory a, uint scalar, uint addend) pure internal returns (MathError, uint) {
        (MathError err, Exp memory product) = mulScalar(a, scalar);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return addUInt(truncate(product), addend);
    }

    /**
     * @dev Divide an Exp by a scalar, returning a new Exp.
     */
    function divScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
        (MathError err0, uint descaledMantissa) = divUInt(a.mantissa, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        return (MathError.NO_ERROR, Exp({mantissa: descaledMantissa}));
    }

    /**
     * @dev Divide a scalar by an Exp, returning a new Exp.
     */
    function divScalarByExp(uint scalar, Exp memory divisor) pure internal returns (MathError, Exp memory) {
        /*
          We are doing this as:
          getExp(mulUInt(expScale, scalar), divisor.mantissa)

          How it works:
          Exp = a / b;
          Scalar = s;
          `s / (a / b)` = `b * s / a` and since for an Exp `a = mantissa, b = expScale`
        */
        (MathError err0, uint numerator) = mulUInt(expScale, scalar);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }
        return getExp(numerator, divisor.mantissa);
    }

    /**
     * @dev Divide a scalar by an Exp, then truncate to return an unsigned integer.
     */
    function divScalarByExpTruncate(uint scalar, Exp memory divisor) pure internal returns (MathError, uint) {
        (MathError err, Exp memory fraction) = divScalarByExp(scalar, divisor);
        if (err != MathError.NO_ERROR) {
            return (err, 0);
        }

        return (MathError.NO_ERROR, truncate(fraction));
    }

    /**
     * @dev Multiplies two exponentials, returning a new exponential.
     */
    function mulExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {

        (MathError err0, uint doubleScaledProduct) = mulUInt(a.mantissa, b.mantissa);
        if (err0 != MathError.NO_ERROR) {
            return (err0, Exp({mantissa: 0}));
        }

        // We add half the scale before dividing so that we get rounding instead of truncation.
        //  See "Listing 6" and text above it at https://accu.org/index.php/journals/1717
        // Without this change, a result like 6.6...e-19 will be truncated to 0 instead of being rounded to 1e-18.
        (MathError err1, uint doubleScaledProductWithHalfScale) = addUInt(halfExpScale, doubleScaledProduct);
        if (err1 != MathError.NO_ERROR) {
            return (err1, Exp({mantissa: 0}));
        }

        (MathError err2, uint product) = divUInt(doubleScaledProductWithHalfScale, expScale);
        // The only error `div` can return is MathError.DIVISION_BY_ZERO but we control `expScale` and it is not zero.
        assert(err2 == MathError.NO_ERROR);

        return (MathError.NO_ERROR, Exp({mantissa: product}));
    }

    /**
     * @dev Multiplies two exponentials given their mantissas, returning a new exponential.
     */
    function mulExp(uint a, uint b) pure internal returns (MathError, Exp memory) {
        return mulExp(Exp({mantissa: a}), Exp({mantissa: b}));
    }

    /**
     * @dev Multiplies three exponentials, returning a new exponential.
     */
    function mulExp3(Exp memory a, Exp memory b, Exp memory c) pure internal returns (MathError, Exp memory) {
        (MathError err, Exp memory ab) = mulExp(a, b);
        if (err != MathError.NO_ERROR) {
            return (err, ab);
        }
        return mulExp(ab, c);
    }

    /**
     * @dev Divides two exponentials, returning a new exponential.
     *     (a/scale) / (b/scale) = (a/scale) * (scale/b) = a/b,
     *  which we can scale as an Exp by calling getExp(a.mantissa, b.mantissa)
     */
    function divExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
        return getExp(a.mantissa, b.mantissa);
    }
}

File 18 of 28: ExponentialNoError.sol
pragma solidity ^0.5.16;

/**
 * @title Exponential module for storing fixed-precision decimals
 * @author Compound
 * @notice Exp is a struct which stores decimals with a fixed precision of 18 decimal places.
 *         Thus, if we wanted to store the 5.1, mantissa would store 5.1e18. That is:
 *         `Exp({mantissa: 5100000000000000000})`.
 */
contract ExponentialNoError {
    uint constant expScale = 1e18;
    uint constant doubleScale = 1e36;
    uint constant halfExpScale = expScale/2;
    uint constant mantissaOne = expScale;

    struct Exp {
        uint mantissa;
    }

    struct Double {
        uint mantissa;
    }

    /**
     * @dev Truncates the given exp to a whole number value.
     *      For example, truncate(Exp{mantissa: 15 * expScale}) = 15
     */
    function truncate(Exp memory exp) pure internal returns (uint) {
        // Note: We are not using careful math here as we're performing a division that cannot fail
        return exp.mantissa / expScale;
    }

    /**
     * @dev Multiply an Exp by a scalar, then truncate to return an unsigned integer.
     */
    function mul_ScalarTruncate(Exp memory a, uint scalar) pure internal returns (uint) {
        Exp memory product = mul_(a, scalar);
        return truncate(product);
    }

    /**
     * @dev Multiply an Exp by a scalar, truncate, then add an to an unsigned integer, returning an unsigned integer.
     */
    function mul_ScalarTruncateAddUInt(Exp memory a, uint scalar, uint addend) pure internal returns (uint) {
        Exp memory product = mul_(a, scalar);
        return add_(truncate(product), addend);
    }

    /**
     * @dev Checks if first Exp is less than second Exp.
     */
    function lessThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa < right.mantissa;
    }

    /**
     * @dev Checks if left Exp <= right Exp.
     */
    function lessThanOrEqualExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa <= right.mantissa;
    }

    /**
     * @dev Checks if left Exp > right Exp.
     */
    function greaterThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa > right.mantissa;
    }

    /**
     * @dev returns true if Exp is exactly zero
     */
    function isZeroExp(Exp memory value) pure internal returns (bool) {
        return value.mantissa == 0;
    }

    function safe224(uint n, string memory errorMessage) pure internal returns (uint224) {
        require(n < 2**224, errorMessage);
        return uint224(n);
    }

    function safe32(uint n, string memory errorMessage) pure internal returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function add_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: add_(a.mantissa, b.mantissa)});
    }

    function add_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: add_(a.mantissa, b.mantissa)});
    }

    function add_(uint a, uint b) pure internal returns (uint) {
        return add_(a, b, "addition overflow");
    }

    function add_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
        uint c = a + b;
        require(c >= a, errorMessage);
        return c;
    }

    function sub_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: sub_(a.mantissa, b.mantissa)});
    }

    function sub_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: sub_(a.mantissa, b.mantissa)});
    }

    function sub_(uint a, uint b) pure internal returns (uint) {
        return sub_(a, b, "subtraction underflow");
    }

    function sub_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
        require(b <= a, errorMessage);
        return a - b;
    }

    function mul_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: mul_(a.mantissa, b.mantissa) / expScale});
    }

    function mul_(Exp memory a, uint b) pure internal returns (Exp memory) {
        return Exp({mantissa: mul_(a.mantissa, b)});
    }

    function mul_(uint a, Exp memory b) pure internal returns (uint) {
        return mul_(a, b.mantissa) / expScale;
    }

    function mul_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: mul_(a.mantissa, b.mantissa) / doubleScale});
    }

    function mul_(Double memory a, uint b) pure internal returns (Double memory) {
        return Double({mantissa: mul_(a.mantissa, b)});
    }

    function mul_(uint a, Double memory b) pure internal returns (uint) {
        return mul_(a, b.mantissa) / doubleScale;
    }

    function mul_(uint a, uint b) pure internal returns (uint) {
        return mul_(a, b, "multiplication overflow");
    }

    function mul_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
        if (a == 0 || b == 0) {
            return 0;
        }
        uint c = a * b;
        require(c / a == b, errorMessage);
        return c;
    }

    function div_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: div_(mul_(a.mantissa, expScale), b.mantissa)});
    }

    function div_(Exp memory a, uint b) pure internal returns (Exp memory) {
        return Exp({mantissa: div_(a.mantissa, b)});
    }

    function div_(uint a, Exp memory b) pure internal returns (uint) {
        return div_(mul_(a, expScale), b.mantissa);
    }

    function div_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: div_(mul_(a.mantissa, doubleScale), b.mantissa)});
    }

    function div_(Double memory a, uint b) pure internal returns (Double memory) {
        return Double({mantissa: div_(a.mantissa, b)});
    }

    function div_(uint a, Double memory b) pure internal returns (uint) {
        return div_(mul_(a, doubleScale), b.mantissa);
    }

    function div_(uint a, uint b) pure internal returns (uint) {
        return div_(a, b, "divide by zero");
    }

    function div_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
        require(b > 0, errorMessage);
        return a / b;
    }

    function fraction(uint a, uint b) pure internal returns (Double memory) {
        return Double({mantissa: div_(mul_(a, doubleScale), b)});
    }
}

File 19 of 28: IFuseFeeDistributor.sol
pragma solidity ^0.5.16;

interface IFuseFeeDistributor {
    function minBorrowEth() external view returns (uint256);
    function maxSupplyEth() external view returns (uint256);
    function maxUtilizationRate() external view returns (uint256);
    function interestFeeRate() external view returns (uint256);
    function comptrollerImplementationWhitelist(address oldImplementation, address newImplementation) external view returns (bool);
    function cErc20DelegateWhitelist(address oldImplementation, address newImplementation, bool allowResign) external view returns (bool);
    function cEtherDelegateWhitelist(address oldImplementation, address newImplementation, bool allowResign) external view returns (bool);
    function latestComptrollerImplementation(address oldImplementation) external view returns (address);
    function latestCErc20Delegate(address oldImplementation) external view returns (address cErc20Delegate, bool allowResign, bytes memory becomeImplementationData);
    function latestCEtherDelegate(address oldImplementation) external view returns (address cEtherDelegate, bool allowResign, bytes memory becomeImplementationData);
    function deployCEther(bytes calldata constructorData) external returns (address);
    function deployCErc20(bytes calldata constructorData) external returns (address);
    function () external payable;
}

File 20 of 28: InterestRateModel.sol
pragma solidity ^0.5.16;

/**
  * @title Compound's InterestRateModel Interface
  * @author Compound
  */
contract InterestRateModel {
    /// @notice Indicator that this is an InterestRateModel contract (for inspection)
    bool public constant isInterestRateModel = true;

    /**
      * @notice Calculates the current borrow interest rate per block
      * @param cash The total amount of cash the market has
      * @param borrows The total amount of borrows the market has outstanding
      * @param reserves The total amount of reserves the market has
      * @return The borrow rate per block (as a percentage, and scaled by 1e18)
      */
    function getBorrowRate(uint cash, uint borrows, uint reserves) external view returns (uint);

    /**
      * @notice Calculates the current supply interest rate per block
      * @param cash The total amount of cash the market has
      * @param borrows The total amount of borrows the market has outstanding
      * @param reserves The total amount of reserves the market has
      * @param reserveFactorMantissa The current reserve factor the market has
      * @return The supply rate per block (as a percentage, and scaled by 1e18)
      */
    function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) external view returns (uint);

}

File 21 of 28: JumpRateModel.sol
pragma solidity ^0.5.16;

import "./InterestRateModel.sol";
import "./SafeMath.sol";

/**
  * @title Compound's JumpRateModel Contract
  * @author Compound
  */
contract JumpRateModel is InterestRateModel {
    using SafeMath for uint;

    event NewInterestParams(uint baseRatePerBlock, uint multiplierPerBlock, uint jumpMultiplierPerBlock, uint kink);

    /**
     * @notice The approximate number of blocks per year that is assumed by the interest rate model
     */
    uint public constant blocksPerYear = 2102400;

    /**
     * @notice The multiplier of utilization rate that gives the slope of the interest rate
     */
    uint public multiplierPerBlock;

    /**
     * @notice The base interest rate which is the y-intercept when utilization rate is 0
     */
    uint public baseRatePerBlock;

    /**
     * @notice The multiplierPerBlock after hitting a specified utilization point
     */
    uint public jumpMultiplierPerBlock;

    /**
     * @notice The utilization point at which the jump multiplier is applied
     */
    uint public kink;

    /**
     * @notice Construct an interest rate model
     * @param baseRatePerYear The approximate target base APR, as a mantissa (scaled by 1e18)
     * @param multiplierPerYear The rate of increase in interest rate wrt utilization (scaled by 1e18)
     * @param jumpMultiplierPerYear The multiplierPerBlock after hitting a specified utilization point
     * @param kink_ The utilization point at which the jump multiplier is applied
     */
    constructor(uint baseRatePerYear, uint multiplierPerYear, uint jumpMultiplierPerYear, uint kink_) public {
        baseRatePerBlock = baseRatePerYear.div(blocksPerYear);
        multiplierPerBlock = multiplierPerYear.div(blocksPerYear);
        jumpMultiplierPerBlock = jumpMultiplierPerYear.div(blocksPerYear);
        kink = kink_;

        emit NewInterestParams(baseRatePerBlock, multiplierPerBlock, jumpMultiplierPerBlock, kink);
    }

    /**
     * @notice Calculates the utilization rate of the market: `borrows / (cash + borrows - reserves)`
     * @param cash The amount of cash in the market
     * @param borrows The amount of borrows in the market
     * @param reserves The amount of reserves in the market (currently unused)
     * @return The utilization rate as a mantissa between [0, 1e18]
     */
    function utilizationRate(uint cash, uint borrows, uint reserves) public pure returns (uint) {
        // Utilization rate is 0 when there are no borrows
        if (borrows == 0) {
            return 0;
        }

        return borrows.mul(1e18).div(cash.add(borrows).sub(reserves));
    }

    /**
     * @notice Calculates the current borrow rate per block, with the error code expected by the market
     * @param cash The amount of cash in the market
     * @param borrows The amount of borrows in the market
     * @param reserves The amount of reserves in the market
     * @return The borrow rate percentage per block as a mantissa (scaled by 1e18)
     */
    function getBorrowRate(uint cash, uint borrows, uint reserves) public view returns (uint) {
        uint util = utilizationRate(cash, borrows, reserves);

        if (util <= kink) {
            return util.mul(multiplierPerBlock).div(1e18).add(baseRatePerBlock);
        } else {
            uint normalRate = kink.mul(multiplierPerBlock).div(1e18).add(baseRatePerBlock);
            uint excessUtil = util.sub(kink);
            return excessUtil.mul(jumpMultiplierPerBlock).div(1e18).add(normalRate);
        }
    }

    /**
     * @notice Calculates the current supply rate per block
     * @param cash The amount of cash in the market
     * @param borrows The amount of borrows in the market
     * @param reserves The amount of reserves in the market
     * @param reserveFactorMantissa The current reserve factor for the market
     * @return The supply rate percentage per block as a mantissa (scaled by 1e18)
     */
    function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) public view returns (uint) {
        uint oneMinusReserveFactor = uint(1e18).sub(reserveFactorMantissa);
        uint borrowRate = getBorrowRate(cash, borrows, reserves);
        uint rateToPool = borrowRate.mul(oneMinusReserveFactor).div(1e18);
        return utilizationRate(cash, borrows, reserves).mul(rateToPool).div(1e18);
    }
}

File 22 of 28: PriceOracle.sol
pragma solidity ^0.5.16;

import "./CToken.sol";

contract PriceOracle {
    /// @notice Indicator that this is a PriceOracle contract (for inspection)
    bool public constant isPriceOracle = true;

    /**
      * @notice Get the underlying price of a cToken asset
      * @param cToken The cToken to get the underlying price of
      * @return The underlying asset price mantissa (scaled by 1e18).
      *  Zero means the price is unavailable.
      */
    function getUnderlyingPrice(CToken cToken) external view returns (uint);
}

File 23 of 28: Reservoir.sol
pragma solidity ^0.5.16;

/**
 * @title Reservoir Contract
 * @notice Distributes a token to a different contract at a fixed rate.
 * @dev This contract must be poked via the `drip()` function every so often.
 * @author Compound
 */
contract Reservoir {

  /// @notice The block number when the Reservoir started (immutable)
  uint public dripStart;

  /// @notice Tokens per block that to drip to target (immutable)
  uint public dripRate;

  /// @notice Reference to token to drip (immutable)
  EIP20Interface public token;

  /// @notice Target to receive dripped tokens (immutable)
  address public target;

  /// @notice Amount that has already been dripped
  uint public dripped;

  /**
    * @notice Constructs a Reservoir
    * @param dripRate_ Numer of tokens per block to drip
    * @param token_ The token to drip
    * @param target_ The recipient of dripped tokens
    */
  constructor(uint dripRate_, EIP20Interface token_, address target_) public {
    dripStart = block.number;
    dripRate = dripRate_;
    token = token_;
    target = target_;
    dripped = 0;
  }

  /**
    * @notice Drips the maximum amount of tokens to match the drip rate since inception
    * @dev Note: this will only drip up to the amount of tokens available.
    * @return The amount of tokens dripped in this call
    */
  function drip() public returns (uint) {
    // First, read storage into memory
    EIP20Interface token_ = token;
    uint reservoirBalance_ = token_.balanceOf(address(this)); // TODO: Verify this is a static call
    uint dripRate_ = dripRate;
    uint dripStart_ = dripStart;
    uint dripped_ = dripped;
    address target_ = target;
    uint blockNumber_ = block.number;

    // Next, calculate intermediate values
    uint dripTotal_ = mul(dripRate_, blockNumber_ - dripStart_, "dripTotal overflow");
    uint deltaDrip_ = sub(dripTotal_, dripped_, "deltaDrip underflow");
    uint toDrip_ = min(reservoirBalance_, deltaDrip_);
    uint drippedNext_ = add(dripped_, toDrip_, "tautological");

    // Finally, write new `dripped` value and transfer tokens to target
    dripped = drippedNext_;
    token_.transfer(target_, toDrip_);

    return toDrip_;
  }

  /* Internal helper functions for safe math */

  function add(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
    uint c = a + b;
    require(c >= a, errorMessage);
    return c;
  }

  function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
    require(b <= a, errorMessage);
    uint c = a - b;
    return c;
  }

  function mul(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
    if (a == 0) {
      return 0;
    }
    uint c = a * b;
    require(c / a == b, errorMessage);
    return c;
  }

  function min(uint a, uint b) internal pure returns (uint) {
    if (a <= b) {
      return a;
    } else {
      return b;
    }
  }
}

import "./EIP20Interface.sol";

File 24 of 28: RewardsDistributorDelegate.sol
pragma solidity ^0.5.16;

import "./CToken.sol";
import "./ExponentialNoError.sol";
import "./Comptroller.sol";
import "./RewardsDistributorStorage.sol";

/**
 * @title RewardsDistributorDelegate (COMP distribution logic extracted from `Comptroller`)
 * @author Compound
 */
contract RewardsDistributorDelegate is RewardsDistributorDelegateStorageV1, ExponentialNoError {
    /// @dev Notice that this contract is a RewardsDistributor
    bool public constant isRewardsDistributor = true;

    /// @notice Emitted when pendingAdmin is changed
    event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);

    /// @notice Emitted when pendingAdmin is accepted, which means admin is updated
    event NewAdmin(address oldAdmin, address newAdmin);

    /// @notice Emitted when a new COMP speed is calculated for a market
    event CompSupplySpeedUpdated(CToken indexed cToken, uint newSpeed);

    /// @notice Emitted when a new COMP speed is calculated for a market
    event CompBorrowSpeedUpdated(CToken indexed cToken, uint newSpeed);

    /// @notice Emitted when a new COMP speed is set for a contributor
    event ContributorCompSpeedUpdated(address indexed contributor, uint newSpeed);

    /// @notice Emitted when COMP is distributed to a supplier
    event DistributedSupplierComp(CToken indexed cToken, address indexed supplier, uint compDelta, uint compSupplyIndex);

    /// @notice Emitted when COMP is distributed to a borrower
    event DistributedBorrowerComp(CToken indexed cToken, address indexed borrower, uint compDelta, uint compBorrowIndex);

    /// @notice Emitted when COMP is granted by admin
    event CompGranted(address recipient, uint amount);

    /// @notice The initial COMP index for a market
    uint224 public constant compInitialIndex = 1e36;

    /// @dev Intitializer to set admin to caller and set reward token
    function initialize(address _rewardToken) external {
        require(msg.sender == admin, "Only admin can initialize.");
        require(rewardToken == address(0), "Already initialized.");
        require(_rewardToken != address(0), "Cannot initialize reward token to the zero address.");
        rewardToken = _rewardToken;
    }

    /*** Set Admin ***/

    /**
      * @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @param newPendingAdmin New pending admin.
      */
    function _setPendingAdmin(address newPendingAdmin) external {
        // Check caller = admin
        require(msg.sender == admin, "RewardsDistributor:_setPendingAdmin: admin only");

        // Save current value, if any, for inclusion in log
        address oldPendingAdmin = pendingAdmin;

        // Store pendingAdmin with value newPendingAdmin
        pendingAdmin = newPendingAdmin;

        // Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
        emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);
    }

    /**
      * @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
      * @dev Admin function for pending admin to accept role and update admin
      */
    function _acceptAdmin() external {
        // Check caller is pendingAdmin and pendingAdmin ≠ address(0)
        require(msg.sender == pendingAdmin && msg.sender != address(0), "RewardsDistributor:_acceptAdmin: pending admin only");

        // Save current values for inclusion in log
        address oldAdmin = admin;
        address oldPendingAdmin = pendingAdmin;

        // Store admin with value pendingAdmin
        admin = pendingAdmin;

        // Clear the pending value
        pendingAdmin = address(0);

        emit NewAdmin(oldAdmin, admin);
        emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);
    }

    /*** Comp Distribution ***/

    /**
     * @notice Check the cToken before adding
     * @param cToken The market to add
     */
    function checkCToken(CToken cToken) internal view {
        // Make sure cToken is listed
        Comptroller comptroller = Comptroller(address(cToken.comptroller()));
        (bool isListed, ) = comptroller.markets(address(cToken));
        require(isListed == true, "comp market is not listed");

        // Make sure distributor is added
        bool distributorAdded = false;
        address[] memory distributors = comptroller.getRewardsDistributors();
        for (uint256 i = 0; i < distributors.length; i++) if (distributors[i] == address(this)) distributorAdded = true; 
        require(distributorAdded == true, "distributor not added");
    }

    /**
     * @notice Set COMP speed for a single market
     * @param cToken The market whose COMP speed to update
     * @param compSpeed New COMP speed for market
     */
    function setCompSupplySpeedInternal(CToken cToken, uint compSpeed) internal {
        uint currentCompSpeed = compSupplySpeeds[address(cToken)];
        if (currentCompSpeed != 0) {
            // note that COMP speed could be set to 0 to halt liquidity rewards for a market
            updateCompSupplyIndex(address(cToken));
        } else if (compSpeed != 0) {
            // Make sure cToken is listed and distributor is added
            checkCToken(cToken);

            // Add the COMP market
            if (compSupplyState[address(cToken)].index == 0) {
                compSupplyState[address(cToken)] = CompMarketState({
                    index: compInitialIndex,
                    block: safe32(getBlockNumber(), "block number exceeds 32 bits")
                });

                // Add to allMarkets array if not already there
                if (compBorrowState[address(cToken)].index == 0) {
                    allMarkets.push(cToken);
                }
            } else {
                // Update block number to ensure extra interest is not accrued during the prior period
                compSupplyState[address(cToken)].block = safe32(getBlockNumber(), "block number exceeds 32 bits");
            }
        }

        if (currentCompSpeed != compSpeed) {
            compSupplySpeeds[address(cToken)] = compSpeed;
            emit CompSupplySpeedUpdated(cToken, compSpeed);
        }
    }

    /**
     * @notice Set COMP speed for a single market
     * @param cToken The market whose COMP speed to update
     * @param compSpeed New COMP speed for market
     */
    function setCompBorrowSpeedInternal(CToken cToken, uint compSpeed) internal {
        uint currentCompSpeed = compBorrowSpeeds[address(cToken)];
        if (currentCompSpeed != 0) {
            // note that COMP speed could be set to 0 to halt liquidity rewards for a market
            Exp memory borrowIndex = Exp({mantissa: cToken.borrowIndex()});
            updateCompBorrowIndex(address(cToken), borrowIndex);
        } else if (compSpeed != 0) {
            // Make sure cToken is listed and distributor is added
            checkCToken(cToken);

            // Add the COMP market
            if (compBorrowState[address(cToken)].index == 0) {
                compBorrowState[address(cToken)] = CompMarketState({
                    index: compInitialIndex,
                    block: safe32(getBlockNumber(), "block number exceeds 32 bits")
                });

                // Add to allMarkets array if not already there
                if (compSupplyState[address(cToken)].index == 0) {
                    allMarkets.push(cToken);
                }
            } else {
                // Update block number to ensure extra interest is not accrued during the prior period
                compBorrowState[address(cToken)].block = safe32(getBlockNumber(), "block number exceeds 32 bits");
            }
        }

        if (currentCompSpeed != compSpeed) {
            compBorrowSpeeds[address(cToken)] = compSpeed;
            emit CompBorrowSpeedUpdated(cToken, compSpeed);
        }
    }

    /**
     * @notice Accrue COMP to the market by updating the supply index
     * @param cToken The market whose supply index to update
     */
    function updateCompSupplyIndex(address cToken) internal {
        CompMarketState storage supplyState = compSupplyState[cToken];
        uint supplySpeed = compSupplySpeeds[cToken];
        uint blockNumber = getBlockNumber();
        uint deltaBlocks = sub_(blockNumber, uint(supplyState.block));
        if (deltaBlocks > 0 && supplySpeed > 0) {
            uint supplyTokens = CToken(cToken).totalSupply();
            uint compAccrued_ = mul_(deltaBlocks, supplySpeed);
            Double memory ratio = supplyTokens > 0 ? fraction(compAccrued_, supplyTokens) : Double({mantissa: 0});
            Double memory index = add_(Double({mantissa: supplyState.index}), ratio);
            compSupplyState[cToken] = CompMarketState({
                index: safe224(index.mantissa, "new index exceeds 224 bits"),
                block: safe32(blockNumber, "block number exceeds 32 bits")
            });
        } else if (deltaBlocks > 0 && supplyState.index > 0) {
            supplyState.block = safe32(blockNumber, "block number exceeds 32 bits");
        }
    }

    /**
     * @notice Accrue COMP to the market by updating the borrow index
     * @param cToken The market whose borrow index to update
     */
    function updateCompBorrowIndex(address cToken, Exp memory marketBorrowIndex) internal {
        CompMarketState storage borrowState = compBorrowState[cToken];
        uint borrowSpeed = compBorrowSpeeds[cToken];
        uint blockNumber = getBlockNumber();
        uint deltaBlocks = sub_(blockNumber, uint(borrowState.block));
        if (deltaBlocks > 0 && borrowSpeed > 0) {
            uint borrowAmount = div_(CToken(cToken).totalBorrows(), marketBorrowIndex);
            uint compAccrued_ = mul_(deltaBlocks, borrowSpeed);
            Double memory ratio = borrowAmount > 0 ? fraction(compAccrued_, borrowAmount) : Double({mantissa: 0});
            Double memory index = add_(Double({mantissa: borrowState.index}), ratio);
            compBorrowState[cToken] = CompMarketState({
                index: safe224(index.mantissa, "new index exceeds 224 bits"),
                block: safe32(blockNumber, "block number exceeds 32 bits")
            });
        } else if (deltaBlocks > 0 && borrowState.index > 0) {
            borrowState.block = safe32(blockNumber, "block number exceeds 32 bits");
        }
    }

    /**
     * @notice Calculate COMP accrued by a supplier and possibly transfer it to them
     * @param cToken The market in which the supplier is interacting
     * @param supplier The address of the supplier to distribute COMP to
     */
    function distributeSupplierComp(address cToken, address supplier) internal {
        CompMarketState storage supplyState = compSupplyState[cToken];
        Double memory supplyIndex = Double({mantissa: supplyState.index});
        Double memory supplierIndex = Double({mantissa: compSupplierIndex[cToken][supplier]});
        compSupplierIndex[cToken][supplier] = supplyIndex.mantissa;

        if (supplierIndex.mantissa == 0 && supplyIndex.mantissa > 0) {
            supplierIndex.mantissa = compInitialIndex;
        }

        Double memory deltaIndex = sub_(supplyIndex, supplierIndex);
        uint supplierTokens = CToken(cToken).balanceOf(supplier);
        uint supplierDelta = mul_(supplierTokens, deltaIndex);
        uint supplierAccrued = add_(compAccrued[supplier], supplierDelta);
        compAccrued[supplier] = supplierAccrued;
        emit DistributedSupplierComp(CToken(cToken), supplier, supplierDelta, supplyIndex.mantissa);
    }

    /**
     * @notice Calculate COMP accrued by a borrower and possibly transfer it to them
     * @param cToken The market in which the borrower is interacting
     * @param borrower The address of the borrower to distribute COMP to
     */
    function distributeBorrowerComp(address cToken, address borrower, Exp memory marketBorrowIndex) internal {
        CompMarketState storage borrowState = compBorrowState[cToken];
        Double memory borrowIndex = Double({mantissa: borrowState.index});
        Double memory borrowerIndex = Double({mantissa: compBorrowerIndex[cToken][borrower]});
        compBorrowerIndex[cToken][borrower] = borrowIndex.mantissa;

        if (borrowerIndex.mantissa == 0 && borrowIndex.mantissa > 0) {
            borrowerIndex.mantissa = compInitialIndex;
        }

        Double memory deltaIndex = sub_(borrowIndex, borrowerIndex);
        uint borrowerAmount = div_(CToken(cToken).borrowBalanceStored(borrower), marketBorrowIndex);
        uint borrowerDelta = mul_(borrowerAmount, deltaIndex);
        uint borrowerAccrued = add_(compAccrued[borrower], borrowerDelta);
        compAccrued[borrower] = borrowerAccrued;
        emit DistributedBorrowerComp(CToken(cToken), borrower, borrowerDelta, borrowIndex.mantissa);
    }

    /**
     * @notice Keeps the flywheel moving pre-mint and pre-redeem
     * @dev Called by the Comptroller
     * @param cToken The relevant market
     * @param supplier The minter/redeemer
     */
    function flywheelPreSupplierAction(address cToken, address supplier) external {
        if (compSupplyState[cToken].index > 0) {
            updateCompSupplyIndex(cToken);
            distributeSupplierComp(cToken, supplier);
        }
    }

    /**
     * @notice Keeps the flywheel moving pre-borrow and pre-repay
     * @dev Called by the Comptroller
     * @param cToken The relevant market
     * @param borrower The borrower
     */
    function flywheelPreBorrowerAction(address cToken, address borrower) external {
        if (compBorrowState[cToken].index > 0) {
            Exp memory borrowIndex = Exp({mantissa: CToken(cToken).borrowIndex()});
            updateCompBorrowIndex(cToken, borrowIndex);
            distributeBorrowerComp(cToken, borrower, borrowIndex);
        }
    }

    /**
     * @notice Keeps the flywheel moving pre-transfer and pre-seize
     * @dev Called by the Comptroller
     * @param cToken The relevant market
     * @param src The account which sources the tokens
     * @param dst The account which receives the tokens
     */
    function flywheelPreTransferAction(address cToken, address src, address dst) external {
        if (compSupplyState[cToken].index > 0) {
            updateCompSupplyIndex(cToken);
            distributeSupplierComp(cToken, src);
            distributeSupplierComp(cToken, dst);
        }
    }

    /**
     * @notice Calculate additional accrued COMP for a contributor since last accrual
     * @param contributor The address to calculate contributor rewards for
     */
    function updateContributorRewards(address contributor) public {
        uint compSpeed = compContributorSpeeds[contributor];
        uint blockNumber = getBlockNumber();
        uint deltaBlocks = sub_(blockNumber, lastContributorBlock[contributor]);
        if (deltaBlocks > 0 && compSpeed > 0) {
            uint newAccrued = mul_(deltaBlocks, compSpeed);
            uint contributorAccrued = add_(compAccrued[contributor], newAccrued);

            compAccrued[contributor] = contributorAccrued;
            lastContributorBlock[contributor] = blockNumber;
        }
    }

    /**
     * @notice Claim all the comp accrued by holder in all markets
     * @param holder The address to claim COMP for
     */
    function claimRewards(address holder) public {
        return claimRewards(holder, allMarkets);
    }

    /**
     * @notice Claim all the comp accrued by holder in the specified markets
     * @param holder The address to claim COMP for
     * @param cTokens The list of markets to claim COMP in
     */
    function claimRewards(address holder, CToken[] memory cTokens) public {
        address[] memory holders = new address[](1);
        holders[0] = holder;
        claimRewards(holders, cTokens, true, true);
    }

    /**
     * @notice Claim all comp accrued by the holders
     * @param holders The addresses to claim COMP for
     * @param cTokens The list of markets to claim COMP in
     * @param borrowers Whether or not to claim COMP earned by borrowing
     * @param suppliers Whether or not to claim COMP earned by supplying
     */
    function claimRewards(address[] memory holders, CToken[] memory cTokens, bool borrowers, bool suppliers) public {
        for (uint i = 0; i < cTokens.length; i++) {
            CToken cToken = cTokens[i];
            if (borrowers == true && compBorrowState[address(cToken)].index > 0) {
                Exp memory borrowIndex = Exp({mantissa: cToken.borrowIndex()});
                updateCompBorrowIndex(address(cToken), borrowIndex);
                for (uint j = 0; j < holders.length; j++) {
                    distributeBorrowerComp(address(cToken), holders[j], borrowIndex);
                }
            }
            if (suppliers == true && compSupplyState[address(cToken)].index > 0) {
                updateCompSupplyIndex(address(cToken));
                for (uint j = 0; j < holders.length; j++) {
                    distributeSupplierComp(address(cToken), holders[j]);
                }
            }
        }
        for (uint j = 0; j < holders.length; j++) {
            compAccrued[holders[j]] = grantCompInternal(holders[j], compAccrued[holders[j]]);
        }
    }

    /**
     * @notice Transfer COMP to the user
     * @dev Note: If there is not enough COMP, we do not perform the transfer all.
     * @param user The address of the user to transfer COMP to
     * @param amount The amount of COMP to (possibly) transfer
     * @return The amount of COMP which was NOT transferred to the user
     */
    function grantCompInternal(address user, uint amount) internal returns (uint) {
        EIP20NonStandardInterface comp = EIP20NonStandardInterface(rewardToken);
        uint compRemaining = comp.balanceOf(address(this));
        if (amount > 0 && amount <= compRemaining) {
            comp.transfer(user, amount);
            return 0;
        }
        return amount;
    }

    /*** Comp Distribution Admin ***/

    /**
     * @notice Transfer COMP to the recipient
     * @dev Note: If there is not enough COMP, we do not perform the transfer all.
     * @param recipient The address of the recipient to transfer COMP to
     * @param amount The amount of COMP to (possibly) transfer
     */
    function _grantComp(address recipient, uint amount) public {
        require(msg.sender == admin, "only admin can grant comp");
        uint amountLeft = grantCompInternal(recipient, amount);
        require(amountLeft == 0, "insufficient comp for grant");
        emit CompGranted(recipient, amount);
    }

    /**
     * @notice Set COMP speed for a single market
     * @param cToken The market whose COMP speed to update
     * @param compSpeed New COMP speed for market
     */
    function _setCompSupplySpeed(CToken cToken, uint compSpeed) public {
        require(msg.sender == admin, "only admin can set comp speed");
        setCompSupplySpeedInternal(cToken, compSpeed);
    }

    /**
     * @notice Set COMP speed for a single market
     * @param cToken The market whose COMP speed to update
     * @param compSpeed New COMP speed for market
     */
    function _setCompBorrowSpeed(CToken cToken, uint compSpeed) public {
        require(msg.sender == admin, "only admin can set comp speed");
        setCompBorrowSpeedInternal(cToken, compSpeed);
    }

    /**
     * @notice Set COMP borrow and supply speeds for the specified markets.
     * @param cTokens The markets whose COMP speed to update.
     * @param supplySpeeds New supply-side COMP speed for the corresponding market.
     * @param borrowSpeeds New borrow-side COMP speed for the corresponding market.
     */
    function _setCompSpeeds(CToken[] memory cTokens, uint[] memory supplySpeeds, uint[] memory borrowSpeeds) public {
        require(msg.sender == admin, "only admin can set comp speed");

        uint numTokens = cTokens.length;
        require(numTokens == supplySpeeds.length && numTokens == borrowSpeeds.length, "RewardsDistributor::_setCompSpeeds invalid input");

        for (uint i = 0; i < numTokens; ++i) {
            setCompSupplySpeedInternal(cTokens[i], supplySpeeds[i]);
            setCompBorrowSpeedInternal(cTokens[i], borrowSpeeds[i]);
        }
    }

    /**
     * @notice Set COMP speed for a single contributor
     * @param contributor The contributor whose COMP speed to update
     * @param compSpeed New COMP speed for contributor
     */
    function _setContributorCompSpeed(address contributor, uint compSpeed) public {
        require(msg.sender == admin, "only admin can set comp speed");

        // note that COMP speed could be set to 0 to halt liquidity rewards for a contributor
        updateContributorRewards(contributor);
        if (compSpeed == 0) {
            // release storage
            delete lastContributorBlock[contributor];
        } else {
            lastContributorBlock[contributor] = getBlockNumber();
        }
        compContributorSpeeds[contributor] = compSpeed;

        emit ContributorCompSpeedUpdated(contributor, compSpeed);
    }

    /*** Helper Functions */

    function getBlockNumber() public view returns (uint) {
        return block.number;
    }

    /**
     * @notice Returns an array of all markets.
     */
    function getAllMarkets() external view returns (CToken[] memory) {
        return allMarkets;
    }
}

File 25 of 28: RewardsDistributorDelegator.sol
pragma solidity ^0.5.16;
pragma experimental ABIEncoderV2;

import "./RewardsDistributorStorage.sol";

contract RewardsDistributorDelegator is RewardsDistributorDelegatorStorage {
    /// @notice Emitted when implementation is changed
    event NewImplementation(address oldImplementation, address newImplementation);

	constructor(
			address admin_,
			address rewardToken_,
	        address implementation_) public {

        // Admin set to msg.sender for initialization
        admin = msg.sender;

        delegateTo(implementation_, abi.encodeWithSignature("initialize(address)", rewardToken_));

        _setImplementation(implementation_);

        admin = admin_;
	}


	/**
     * @notice Called by the admin to update the implementation of the delegator
     * @param implementation_ The address of the new implementation for delegation
     */
    function _setImplementation(address implementation_) public {
        require(msg.sender == admin, "RewardsDistributorDelegator::_setImplementation: admin only");
        require(implementation_ != address(0), "RewardsDistributorDelegator::_setImplementation: invalid implementation address");

        address oldImplementation = implementation;
        implementation = implementation_;

        emit NewImplementation(oldImplementation, implementation);
    }

    /**
     * @notice Internal method to delegate execution to another contract
     * @dev It returns to the external caller whatever the implementation returns or forwards reverts
     * @param callee The contract to delegatecall
     * @param data The raw data to delegatecall
     */
    function delegateTo(address callee, bytes memory data) internal {
        (bool success, bytes memory returnData) = callee.delegatecall(data);
        assembly {
            if eq(success, 0) {
                revert(add(returnData, 0x20), returndatasize)
            }
        }
    }

	/**
     * @dev Delegates execution to an implementation contract.
     * It returns to the external caller whatever the implementation returns
     * or forwards reverts.
     */
    function () external payable {
        // delegate all other functions to current implementation
        (bool success, ) = implementation.delegatecall(msg.data);

        assembly {
              let free_mem_ptr := mload(0x40)
              returndatacopy(free_mem_ptr, 0, returndatasize)

              switch success
              case 0 { revert(free_mem_ptr, returndatasize) }
              default { return(free_mem_ptr, returndatasize) }
        }
    }
}

File 26 of 28: RewardsDistributorStorage.sol
pragma solidity ^0.5.16;
pragma experimental ABIEncoderV2;

import "./CToken.sol";

contract RewardsDistributorDelegatorStorage {
    /// @notice Administrator for this contract
    address public admin;

    /// @notice Pending administrator for this contract
    address public pendingAdmin;

    /// @notice Active brains of RewardsDistributor
    address public implementation;
}

/**
 * @title Storage for RewardsDistributorDelegate
 * @notice For future upgrades, do not change RewardsDistributorDelegateStorageV1. Create a new
 * contract which implements RewardsDistributorDelegateStorageV1 and following the naming convention
 * RewardsDistributorDelegateStorageVX.
 */
contract RewardsDistributorDelegateStorageV1 is RewardsDistributorDelegatorStorage {
    /// @dev The token to reward (i.e., COMP)
    address public rewardToken;

    struct CompMarketState {
        /// @notice The market's last updated compBorrowIndex or compSupplyIndex
        uint224 index;

        /// @notice The block number the index was last updated at
        uint32 block;
    }

    /// @notice A list of all markets
    CToken[] public allMarkets;

    /// @notice The portion of compRate that each market currently receives
    mapping(address => uint) public compSupplySpeeds;

    /// @notice The portion of compRate that each market currently receives
    mapping(address => uint) public compBorrowSpeeds;

    /// @notice The COMP market supply state for each market
    mapping(address => CompMarketState) public compSupplyState;

    /// @notice The COMP market borrow state for each market
    mapping(address => CompMarketState) public compBorrowState;

    /// @notice The COMP borrow index for each market for each supplier as of the last time they accrued COMP
    mapping(address => mapping(address => uint)) public compSupplierIndex;

    /// @notice The COMP borrow index for each market for each borrower as of the last time they accrued COMP
    mapping(address => mapping(address => uint)) public compBorrowerIndex;

    /// @notice The COMP accrued but not yet transferred to each user
    mapping(address => uint) public compAccrued;

    /// @notice The portion of COMP that each contributor receives per block
    mapping(address => uint) public compContributorSpeeds;

    /// @notice Last block at which a contributor's COMP rewards have been allocated
    mapping(address => uint) public lastContributorBlock;
}

File 27 of 28: SafeMath.sol
pragma solidity ^0.5.16;

// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, errorMessage);

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction underflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, errorMessage);

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts with custom message on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

File 28 of 28: Unitroller.sol
pragma solidity ^0.5.16;

import "./ErrorReporter.sol";
import "./ComptrollerStorage.sol";

/**
 * @title Unitroller
 * @dev Storage for the comptroller is at this address, while execution is delegated to the `comptrollerImplementation`.
 * CTokens should reference this contract as their comptroller.
 */
contract Unitroller is UnitrollerAdminStorage, ComptrollerErrorReporter {
    /**
      * @notice Emitted when pendingComptrollerImplementation is changed
      */
    event NewPendingImplementation(address oldPendingImplementation, address newPendingImplementation);

    /**
      * @notice Emitted when pendingComptrollerImplementation is accepted, which means comptroller implementation is updated
      */
    event NewImplementation(address oldImplementation, address newImplementation);

    /**
      * @notice Event emitted when the Fuse admin rights are changed
      */
    event FuseAdminRightsToggled(bool hasRights);

    /**
      * @notice Event emitted when the admin rights are changed
      */
    event AdminRightsToggled(bool hasRights);

    /**
      * @notice Emitted when pendingAdmin is changed
      */
    event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);

    /**
      * @notice Emitted when pendingAdmin is accepted, which means admin is updated
      */
    event NewAdmin(address oldAdmin, address newAdmin);

    constructor() public {
        // Set admin to caller
        admin = msg.sender;
    }

    /*** Admin Functions ***/

    function _setPendingImplementation(address newPendingImplementation) public returns (uint) {
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_IMPLEMENTATION_OWNER_CHECK);
        }

        if (!fuseAdmin.comptrollerImplementationWhitelist(comptrollerImplementation, newPendingImplementation)) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_IMPLEMENTATION_CONTRACT_CHECK);
        }

        address oldPendingImplementation = pendingComptrollerImplementation;

        pendingComptrollerImplementation = newPendingImplementation;

        emit NewPendingImplementation(oldPendingImplementation, pendingComptrollerImplementation);

        return uint(Error.NO_ERROR);
    }

    /**
    * @notice Accepts new implementation of comptroller. msg.sender must be pendingImplementation
    * @dev Admin function for new implementation to accept it's role as implementation
    * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
    */
    function _acceptImplementation() public returns (uint) {
        // Check caller is pendingImplementation and pendingImplementation ≠ address(0)
        if (msg.sender != pendingComptrollerImplementation || pendingComptrollerImplementation == address(0)) {
            return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK);
        }

        // Save current values for inclusion in log
        address oldImplementation = comptrollerImplementation;
        address oldPendingImplementation = pendingComptrollerImplementation;

        comptrollerImplementation = pendingComptrollerImplementation;

        pendingComptrollerImplementation = address(0);

        emit NewImplementation(oldImplementation, comptrollerImplementation);
        emit NewPendingImplementation(oldPendingImplementation, pendingComptrollerImplementation);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Toggles Fuse admin rights.
      * @param hasRights Boolean indicating if the Fuse admin is to have rights.
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _toggleFuseAdminRights(bool hasRights) external returns (uint) {
        // Check caller = admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.TOGGLE_ADMIN_RIGHTS_OWNER_CHECK);
        }

        // Check that rights have not already been set to the desired value
        if (fuseAdminHasRights == hasRights) return uint(Error.NO_ERROR);

        // Set fuseAdminHasRights
        fuseAdminHasRights = hasRights;

        // Emit FuseAdminRightsToggled()
        emit FuseAdminRightsToggled(fuseAdminHasRights);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Toggles admin rights.
      * @param hasRights Boolean indicating if the admin is to have rights.
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _toggleAdminRights(bool hasRights) external returns (uint) {
        // Check caller = admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.TOGGLE_ADMIN_RIGHTS_OWNER_CHECK);
        }

        // Check that rights have not already been set to the desired value
        if (adminHasRights == hasRights) return uint(Error.NO_ERROR);

        // Set adminHasRights
        adminHasRights = hasRights;

        // Emit AdminRightsToggled()
        emit AdminRightsToggled(hasRights);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
      * @param newPendingAdmin New pending admin.
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _setPendingAdmin(address newPendingAdmin) public returns (uint) {
        // Check caller = admin
        if (!hasAdminRights()) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_ADMIN_OWNER_CHECK);
        }

        // Save current value, if any, for inclusion in log
        address oldPendingAdmin = pendingAdmin;

        // Store pendingAdmin with value newPendingAdmin
        pendingAdmin = newPendingAdmin;

        // Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
        emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);

        return uint(Error.NO_ERROR);
    }

    /**
      * @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
      * @dev Admin function for pending admin to accept role and update admin
      * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
      */
    function _acceptAdmin() public returns (uint) {
        // Check caller is pendingAdmin and pendingAdmin ≠ address(0)
        if (msg.sender != pendingAdmin || msg.sender == address(0)) {
            return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_ADMIN_PENDING_ADMIN_CHECK);
        }

        // Save current values for inclusion in log
        address oldAdmin = admin;
        address oldPendingAdmin = pendingAdmin;

        // Store admin with value pendingAdmin
        admin = pendingAdmin;

        // Clear the pending value
        pendingAdmin = address(0);

        emit NewAdmin(oldAdmin, admin);
        emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);

        return uint(Error.NO_ERROR);
    }

    /**
     * @dev Delegates execution to an implementation contract.
     * It returns to the external caller whatever the implementation returns
     * or forwards reverts.
     */
    function () payable external {
        // Check for automatic implementation
        if (msg.sender != address(this)) {
            (bool callSuccess, bytes memory data) = address(this).staticcall(abi.encodeWithSignature("autoImplementation()"));
            bool autoImplementation;
            if (callSuccess) (autoImplementation) = abi.decode(data, (bool));

            if (autoImplementation) {
                address latestComptrollerImplementation = fuseAdmin.latestComptrollerImplementation(comptrollerImplementation);

                if (comptrollerImplementation != latestComptrollerImplementation) {
                    address oldImplementation = comptrollerImplementation; // Save current value for inclusion in log
                    comptrollerImplementation = latestComptrollerImplementation;
                    emit NewImplementation(oldImplementation, comptrollerImplementation);
                }
            }
        }

        // delegate all other functions to current implementation
        (bool success, ) = comptrollerImplementation.delegatecall(msg.data);

        assembly {
              let free_mem_ptr := mload(0x40)
              returndatacopy(free_mem_ptr, 0, returndatasize)

              switch success
              case 0 { revert(free_mem_ptr, returndatasize) }
              default { return(free_mem_ptr, returndatasize) }
        }
    }
}

Contract ABI

[{"inputs":[{"internalType":"address","name":"underlying_","type":"address"},{"internalType":"contract ComptrollerInterface","name":"comptroller_","type":"address"},{"internalType":"contract InterestRateModel","name":"interestRateModel_","type":"address"},{"internalType":"string","name":"name_","type":"string"},{"internalType":"string","name":"symbol_","type":"string"},{"internalType":"address","name":"implementation_","type":"address"},{"internalType":"bytes","name":"becomeImplementationData","type":"bytes"},{"internalType":"uint256","name":"reserveFactorMantissa_","type":"uint256"},{"internalType":"uint256","name":"adminFeeMantissa_","type":"uint256"}],"payable":false,"stateMutability":"nonpayable","type":"constructor"},{"payable":true,"stateMutability":"payable","type":"fallback"},{"constant":true,"inputs":[],"name":"implementation","outputs":[{"internalType":"address","name":"","type":"address"}],"payable":false,"stateMutability":"view","type":"function"}]

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

Deployed ByteCode Sourcemap

254:3556:2:-;;;;;;;;;;;;;;;;;;3189:9;:14;3181:82;;;;-1:-1:-1;;;3181:82:2;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3331:14;;3347:37;;;22:32:-1;6:49;;3347:37:2;;;;;;49:4:-1;25:18;;61:17;;-1:-1;;;;;182:15;-1:-1;;;179:29;160:49;;3320:65:2;;-1:-1:-1;;;;;3331:14:2;;3320:10;:65::i;:::-;-1:-1:-1;3463:12:2;3481:14;;:37;;-1:-1:-1;;;;;3481:14:2;;;;3463:12;;3509:8;;3481:37;3463:12;3509:8;;3463:12;3481:37;1:33:-1;3481:37:2;;45:16:-1;;;-1:-1;3481:37:2;;-1:-1:-1;3481:37:2;;-1:-1:-1;;3481:37:2;;;;;;;;;;;14:1:-1;21;16:31;;;;75:4;69:11;64:16;;144:4;140:9;133:4;115:16;111:27;107:43;104:1;100:51;94:4;87:65;169:16;166:1;159:27;225:16;222:1;215:4;212:1;208:12;193:49;7:242;;16:31;36:4;31:9;;7:242;;3462:56:2;;;3578:4;3572:11;3628:14;3625:1;3611:12;3596:47;3664:7;3684:47;;;;3775:14;3761:12;3754:36;3684:47;3714:14;3700:12;3693:36;9774:29:7;;8:9:-1;5:2;;;30:1;27;20:12;5:2;9774:29:7;;;:::i;:::-;;;;-1:-1:-1;;;;;9774:29:7;;;;;;;;;;;;;;2570:335:2;2643:12;2668;2682:23;2709:6;-1:-1:-1;;;;;2709:19:2;2729:4;2709:25;;;;;;;;;;;;;36:153:-1;66:2;61:3;58:11;36:153;;176:10;;164:23;;-1:-1;;139:12;;;;98:2;89:12;;;;114;36:153;;;274:1;267:3;263:2;259:12;254:3;250:22;246:30;315:4;311:9;305:3;299:10;295:26;356:4;350:3;344:10;340:21;389:7;380;377:20;372:3;365:33;3:399;;;2709:25:2;;;;;;;;;;;;;;;;;;;;;;;14:1:-1;21;16:31;;;;75:4;69:11;64:16;;144:4;140:9;133:4;115:16;111:27;107:43;104:1;100:51;94:4;87:65;169:16;166:1;159:27;225:16;222:1;215:4;212:1;208:12;193:49;7:242;;16:31;36:4;31:9;;7:242;;2667:67:2;;;;2782:1;2773:7;2770:14;2767:2;;;2833:14;2826:4;2814:10;2810:21;2803:45;2767:2;2888:10;2570:335;-1:-1:-1;;;;2570:335:2:o;9774:29:7:-;;;-1:-1:-1;;;;;9774:29:7;;:::o

Metadata Hash

fc5fcc16235ee4edd9b1c0ecaf05a926cd9474cdf4a7678b9c4f511421cf2ac3
Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.