Contract 0x0000000000c2d145a2526bd8c716263bfebe1a72 11

 
Txn Hash Method
Block
From
To
Value [Txn Fee]
0xab9a11d3d9b8fb522e495eca7dcbd15b48b762f2e79d69931e8009fa291373faBulk Transfer577980172023-02-03 22:55:1236 mins ago0xe658fccbddfc7fd94e5c9e077296fef2e7e1f5d9 IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00013358
0xe0290cfec329f8c98b035058e21db318af0e899ad9fded4929f5f3edf0296f96Bulk Transfer577908132023-02-03 22:13:181 hr 18 mins ago0x43fc9dcb200c4db9de16c6d4ea5c89bdefd53356 IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00015774
0xf765beeb94b795c0e5b8d291d16bd5d0cec65a165269d1231087ca48994025e2Bulk Transfer577479642023-02-03 18:14:065 hrs 17 mins ago0x2f2054a08e137d80ecef64681cfd624f60cfc17a IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00013734
0xc22f6dd745faffe70e6b7fdb56c5b1a1bfa24af07b35ca25b96225b94a9434edBulk Transfer577479602023-02-03 18:14:055 hrs 17 mins ago0x8888898ba65bcc0041e84cbf335829c2c484fbf7 IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00012597
0x0d5a07613ab0f52dfa95614dc0fbc4db342e04f37274861e00582b911f3371d7Bulk Transfer577236672023-02-03 16:13:437 hrs 17 mins ago0xd07f8c236944e8b76ed0c14309de542640f13b8b IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00014673
0xd0bba5686a45cf7cd40efb3303d8e79f83c9428a5d0d22f0498be470519a0612Bulk Transfer577136502023-02-03 15:26:028 hrs 5 mins ago0x5575fa22f2153b23517dde034533f5ed8f300c5d IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00015387
0xd5740f5fc17820b609f79f0c211cf9f2f3e1556a01d037ba6ec44c40ca4dd317Bulk Transfer577004782023-02-03 14:24:129 hrs 7 mins ago0xcc1d45b19a11611d3fcfaae736f8485d9054d156 IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00018042
0x8e01a18eeaff254e0a9b9bdc24390a0515d0e5a23cac2ead73c7d7da5079bdfbBulk Transfer576889132023-02-03 13:30:1310 hrs 1 min ago0x01c62f8bbcf7f0f4b872e4d83dce16e61c079b7d IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.0001039
0x3a643d04c15a133049708909de91a121bb40c748b481ccd45c0f0ca58c7ab455Bulk Transfer576464042023-02-03 9:42:0713 hrs 49 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00012675
0xa4284b952ae275ac269d369312f21243ab9fbab88d1f0f5099930cf030a078d2Bulk Transfer576461032023-02-03 9:40:2813 hrs 50 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00010951
0x61c97ef4704848a1b529a8c2e139587ac9d3d2ffed3bf03ae697999cf9a63368Bulk Transfer576450022023-02-03 9:34:4013 hrs 56 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00019483
0x2458fe0619805f71d557f5eb1433e27626f69582ac1db8959c8d1b48a95d734aBulk Transfer576445842023-02-03 9:32:3713 hrs 58 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00012394
0xc8e54eec6d2d70ed0a0ed7fb451d637783e36dfdab009557406a5b0b24befeb0Bulk Transfer576439752023-02-03 9:29:1514 hrs 2 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.0001128
0x7425f2d81708f71c54d3c3b7ab9388370d76bd51f7bcf8c6ca44bc2b43cc254cBulk Transfer576435132023-02-03 9:26:5014 hrs 4 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00011347
0xf05b9f06d8c0e59747104849d0ec7ca442c71b56b0798e70e22ed93a283f31d8Bulk Transfer576431662023-02-03 9:25:0214 hrs 6 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00011229
0x0590885d8da59c5e2c6e8c4e1251adfd24c70fa4e59ce7795d1c6b0329cc4574Bulk Transfer576428332023-02-03 9:23:1414 hrs 8 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00011347
0x28a0af7384560d9770d4422f1c573622fe746d62c274be0a6eb88322368eacb7Bulk Transfer576410382023-02-03 9:13:0614 hrs 18 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00012141
0x3fc800a68e3ade7818b20d87214005614b680aa0173be4cf6ca1b5f94d345d38Bulk Transfer576407932023-02-03 9:11:3514 hrs 19 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00012338
0x3db0fff543d8361be01b8622e57383536ec6acbcb266cec6ffebc3d7bef822fcBulk Transfer576392842023-02-03 9:03:0214 hrs 28 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00012277
0x047c5fcb6c3bd00a3ed54314e7dcc041b37d8ea5e4ca43f954c4d4b3e0988221Bulk Transfer576389142023-02-03 9:01:0314 hrs 30 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00013857
0x1d310db50f19a8682241d6ba7372e4d4515dbf69946e3880f794c195871c2d3aBulk Transfer576381762023-02-03 8:56:5314 hrs 34 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00010748
0x82d9113e16b5a061346249124e6043ad15bb1f95b0879c63af42bfa2275756ceBulk Transfer576379192023-02-03 8:55:2914 hrs 35 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00011112
0x9b56894889a5669bf7d26be4e0bb12afeed2f15a8fc0cf953c8784dc0077c92eBulk Transfer576347942023-02-03 8:38:3214 hrs 52 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00011886
0xfb6a40bee659736fcb997687d7aa69ea794023593407385db30ac46cd8133a91Bulk Transfer576250952023-02-03 7:45:3015 hrs 45 mins ago0x6932e4d7fa85525bc55fff1cb07df146a16f673d IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00023475
0x7dc76b6f36710c74e6f62b48b919bd5f365db57b5fe02260de5c2f3fbb214b39Bulk Transfer576239812023-02-03 7:38:5415 hrs 52 mins ago0xf5c2fdde417e51c63a0ec0875f9bce27b439d8dc IN  0x0000000000c2d145a2526bd8c716263bfebe1a720 ETH0.00015517
[ Download CSV Export 
Latest 25 internal transaction
Parent Txn Hash Block From To Value
0xab9a11d3d9b8fb522e495eca7dcbd15b48b762f2e79d69931e8009fa291373fa577980172023-02-03 22:55:1236 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0xe0290cfec329f8c98b035058e21db318af0e899ad9fded4929f5f3edf0296f96577908132023-02-03 22:13:181 hr 18 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0xf765beeb94b795c0e5b8d291d16bd5d0cec65a165269d1231087ca48994025e2577479642023-02-03 18:14:065 hrs 17 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0xf765beeb94b795c0e5b8d291d16bd5d0cec65a165269d1231087ca48994025e2577479642023-02-03 18:14:065 hrs 17 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a72 0x3adbab4052571b32b151dec91fe74d171a9575ba0 ETH
0xf765beeb94b795c0e5b8d291d16bd5d0cec65a165269d1231087ca48994025e2577479642023-02-03 18:14:065 hrs 17 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a72 0x3adbab4052571b32b151dec91fe74d171a9575ba0 ETH
0xf765beeb94b795c0e5b8d291d16bd5d0cec65a165269d1231087ca48994025e2577479642023-02-03 18:14:065 hrs 17 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a72 0x3adbab4052571b32b151dec91fe74d171a9575ba0 ETH
0xc22f6dd745faffe70e6b7fdb56c5b1a1bfa24af07b35ca25b96225b94a9434ed577479602023-02-03 18:14:055 hrs 17 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x0d5a07613ab0f52dfa95614dc0fbc4db342e04f37274861e00582b911f3371d7577236672023-02-03 16:13:437 hrs 17 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0xd0bba5686a45cf7cd40efb3303d8e79f83c9428a5d0d22f0498be470519a0612577136502023-02-03 15:26:028 hrs 5 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0xd5740f5fc17820b609f79f0c211cf9f2f3e1556a01d037ba6ec44c40ca4dd317577004782023-02-03 14:24:129 hrs 7 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x8e01a18eeaff254e0a9b9bdc24390a0515d0e5a23cac2ead73c7d7da5079bdfb576889132023-02-03 13:30:1310 hrs 1 min ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x3a643d04c15a133049708909de91a121bb40c748b481ccd45c0f0ca58c7ab455576464042023-02-03 9:42:0713 hrs 49 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0xa4284b952ae275ac269d369312f21243ab9fbab88d1f0f5099930cf030a078d2576461032023-02-03 9:40:2813 hrs 50 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x61c97ef4704848a1b529a8c2e139587ac9d3d2ffed3bf03ae697999cf9a63368576450022023-02-03 9:34:4013 hrs 56 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x2458fe0619805f71d557f5eb1433e27626f69582ac1db8959c8d1b48a95d734a576445842023-02-03 9:32:3713 hrs 58 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0xc8e54eec6d2d70ed0a0ed7fb451d637783e36dfdab009557406a5b0b24befeb0576439752023-02-03 9:29:1514 hrs 2 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x7425f2d81708f71c54d3c3b7ab9388370d76bd51f7bcf8c6ca44bc2b43cc254c576435132023-02-03 9:26:5014 hrs 4 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0xf05b9f06d8c0e59747104849d0ec7ca442c71b56b0798e70e22ed93a283f31d8576431662023-02-03 9:25:0214 hrs 6 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x0590885d8da59c5e2c6e8c4e1251adfd24c70fa4e59ce7795d1c6b0329cc4574576428332023-02-03 9:23:1414 hrs 8 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x28a0af7384560d9770d4422f1c573622fe746d62c274be0a6eb88322368eacb7576410382023-02-03 9:13:0614 hrs 18 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x3fc800a68e3ade7818b20d87214005614b680aa0173be4cf6ca1b5f94d345d38576407932023-02-03 9:11:3514 hrs 19 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x3db0fff543d8361be01b8622e57383536ec6acbcb266cec6ffebc3d7bef822fc576392842023-02-03 9:03:0214 hrs 28 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x047c5fcb6c3bd00a3ed54314e7dcc041b37d8ea5e4ca43f954c4d4b3e0988221576389142023-02-03 9:01:0314 hrs 30 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x1d310db50f19a8682241d6ba7372e4d4515dbf69946e3880f794c195871c2d3a576381762023-02-03 8:56:5314 hrs 34 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
0x82d9113e16b5a061346249124e6043ad15bb1f95b0879c63af42bfa2275756ce576379192023-02-03 8:55:2914 hrs 35 mins ago 0x0000000000c2d145a2526bd8c716263bfebe1a720x1e0049783f008a0085193e00003d00cd54003c710 ETH
[ Download CSV Export 
Loading

Contract Source Code Verified (Exact Match)

Contract Name:
TransferHelper

Compiler Version
v0.8.16+commit.07a7930e

Optimization Enabled:
Yes with 1000000 runs

Other Settings:
default evmVersion

Contract Source Code (Solidity Standard Json-Input format)

File 1 of 14 : TransferHelper.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import { IERC721Receiver } from "../interfaces/IERC721Receiver.sol";

import "./TransferHelperStructs.sol";

import { ConduitInterface } from "../interfaces/ConduitInterface.sol";

import {
    ConduitControllerInterface
} from "../interfaces/ConduitControllerInterface.sol";

import { Conduit } from "../conduit/Conduit.sol";

import { ConduitTransfer } from "../conduit/lib/ConduitStructs.sol";

import {
    TransferHelperInterface
} from "../interfaces/TransferHelperInterface.sol";

import { TransferHelperErrors } from "../interfaces/TransferHelperErrors.sol";

/**
 * @title TransferHelper
 * @author stephankmin, stuckinaboot, ryanio
 * @notice TransferHelper is a utility contract for transferring
 *         ERC20/ERC721/ERC1155 items in bulk to specific recipients.
 */
contract TransferHelper is TransferHelperInterface, TransferHelperErrors {
    // Allow for interaction with the conduit controller.
    ConduitControllerInterface internal immutable _CONDUIT_CONTROLLER;

    // Set conduit creation code and runtime code hashes as immutable arguments.
    bytes32 internal immutable _CONDUIT_CREATION_CODE_HASH;
    bytes32 internal immutable _CONDUIT_RUNTIME_CODE_HASH;

    /**
     * @dev Set the supplied conduit controller and retrieve its
     *      conduit creation code hash.
     *
     *
     * @param conduitController A contract that deploys conduits, or proxies
     *                          that may optionally be used to transfer approved
     *                          ERC20/721/1155 tokens.
     */
    constructor(address conduitController) {
        // Get the conduit creation code and runtime code hashes from the
        // supplied conduit controller and set them as an immutable.
        ConduitControllerInterface controller = ConduitControllerInterface(
            conduitController
        );
        (_CONDUIT_CREATION_CODE_HASH, _CONDUIT_RUNTIME_CODE_HASH) = controller
            .getConduitCodeHashes();

        // Set the supplied conduit controller as an immutable.
        _CONDUIT_CONTROLLER = controller;
    }

    /**
     * @notice Transfer multiple ERC20/ERC721/ERC1155 items to
     *         specified recipients.
     *
     * @param items      The items to transfer to an intended recipient.
     * @param conduitKey An optional conduit key referring to a conduit through
     *                   which the bulk transfer should occur.
     *
     * @return magicValue A value indicating that the transfers were successful.
     */
    function bulkTransfer(
        TransferHelperItemsWithRecipient[] calldata items,
        bytes32 conduitKey
    ) external override returns (bytes4 magicValue) {
        // Ensure that a conduit key has been supplied.
        if (conduitKey == bytes32(0)) {
            revert InvalidConduit(conduitKey, address(0));
        }

        // Use conduit derived from supplied conduit key to perform transfers.
        _performTransfersWithConduit(items, conduitKey);

        // Return a magic value indicating that the transfers were performed.
        magicValue = this.bulkTransfer.selector;
    }

    /**
     * @notice Perform multiple transfers to specified recipients via the
     *         conduit derived from the provided conduit key.
     *
     * @param transfers  The items to transfer.
     * @param conduitKey The conduit key referring to the conduit through
     *                   which the bulk transfer should occur.
     */
    function _performTransfersWithConduit(
        TransferHelperItemsWithRecipient[] calldata transfers,
        bytes32 conduitKey
    ) internal {
        // Retrieve total number of transfers and place on stack.
        uint256 numTransfers = transfers.length;

        // Derive the conduit address from the deployer, conduit key
        // and creation code hash.
        address conduit = address(
            uint160(
                uint256(
                    keccak256(
                        abi.encodePacked(
                            bytes1(0xff),
                            address(_CONDUIT_CONTROLLER),
                            conduitKey,
                            _CONDUIT_CREATION_CODE_HASH
                        )
                    )
                )
            )
        );

        // Declare a variable to store the sum of all items across transfers.
        uint256 sumOfItemsAcrossAllTransfers;

        // Skip overflow checks: all for loops are indexed starting at zero.
        unchecked {
            // Iterate over each transfer.
            for (uint256 i = 0; i < numTransfers; ++i) {
                // Retrieve the transfer in question.
                TransferHelperItemsWithRecipient calldata transfer = transfers[
                    i
                ];

                // Increment totalItems by the number of items in the transfer.
                sumOfItemsAcrossAllTransfers += transfer.items.length;
            }
        }

        // Declare a new array in memory with length totalItems to populate with
        // each conduit transfer.
        ConduitTransfer[] memory conduitTransfers = new ConduitTransfer[](
            sumOfItemsAcrossAllTransfers
        );

        // Declare an index for storing ConduitTransfers in conduitTransfers.
        uint256 itemIndex;

        // Skip overflow checks: all for loops are indexed starting at zero.
        unchecked {
            // Iterate over each transfer.
            for (uint256 i = 0; i < numTransfers; ++i) {
                // Retrieve the transfer in question.
                TransferHelperItemsWithRecipient calldata transfer = transfers[
                    i
                ];

                // Retrieve the items of the transfer in question.
                TransferHelperItem[] calldata transferItems = transfer.items;

                // Ensure recipient is not the zero address.
                _checkRecipientIsNotZeroAddress(transfer.recipient);

                // Create a boolean indicating whether validateERC721Receiver
                // is true and recipient is a contract.
                bool callERC721Receiver = transfer.validateERC721Receiver &&
                    transfer.recipient.code.length != 0;

                // Retrieve the total number of items in the transfer and
                // place on stack.
                uint256 numItemsInTransfer = transferItems.length;

                // Iterate over each item in the transfer to create a
                // corresponding ConduitTransfer.
                for (uint256 j = 0; j < numItemsInTransfer; ++j) {
                    // Retrieve the item from the transfer.
                    TransferHelperItem calldata item = transferItems[j];

                    if (item.itemType == ConduitItemType.ERC20) {
                        // Ensure that the identifier of an ERC20 token is 0.
                        if (item.identifier != 0) {
                            revert InvalidERC20Identifier();
                        }
                    }

                    // If the item is an ERC721 token and
                    // callERC721Receiver is true...
                    if (item.itemType == ConduitItemType.ERC721) {
                        if (callERC721Receiver) {
                            // Check if the recipient implements
                            // onERC721Received for the given tokenId.
                            _checkERC721Receiver(
                                conduit,
                                transfer.recipient,
                                item.identifier
                            );
                        }
                    }

                    // Create a ConduitTransfer corresponding to each
                    // TransferHelperItem.
                    conduitTransfers[itemIndex] = ConduitTransfer(
                        item.itemType,
                        item.token,
                        msg.sender,
                        transfer.recipient,
                        item.identifier,
                        item.amount
                    );

                    // Increment the index for storing ConduitTransfers.
                    ++itemIndex;
                }
            }
        }

        // Attempt the external call to transfer tokens via the derived conduit.
        try ConduitInterface(conduit).execute(conduitTransfers) returns (
            bytes4 conduitMagicValue
        ) {
            // Check if the value returned from the external call matches
            // the conduit `execute` selector.
            if (conduitMagicValue != ConduitInterface.execute.selector) {
                // If the external call fails, revert with the conduit key
                // and conduit address.
                revert InvalidConduit(conduitKey, conduit);
            }
        } catch Error(string memory reason) {
            // Catch reverts with a provided reason string and
            // revert with the reason, conduit key and conduit address.
            revert ConduitErrorRevertString(reason, conduitKey, conduit);
        } catch (bytes memory data) {
            // Conduits will throw a custom error when attempting to transfer
            // native token item types or an ERC721 item amount other than 1.
            // Bubble up these custom errors when encountered. Note that the
            // conduit itself will bubble up revert reasons from transfers as
            // well, meaning that these errors are not necessarily indicative of
            // an issue with the item type or amount in cases where the same
            // custom error signature is encountered during a conduit transfer.

            // Set initial value of first four bytes of revert data to the mask.
            bytes4 customErrorSelector = bytes4(0xffffffff);

            // Utilize assembly to read first four bytes (if present) directly.
            assembly {
                // Combine original mask with first four bytes of revert data.
                customErrorSelector := and(
                    mload(add(data, 0x20)), // Data begins after length offset.
                    customErrorSelector
                )
            }

            // Pass through the custom error in question if the revert data is
            // the correct length and matches an expected custom error selector.
            if (
                data.length == 4 &&
                (customErrorSelector == InvalidItemType.selector ||
                    customErrorSelector == InvalidERC721TransferAmount.selector)
            ) {
                // "Bubble up" the revert reason.
                assembly {
                    revert(add(data, 0x20), 0x04)
                }
            }

            // Catch all other reverts from the external call to the conduit and
            // include the conduit's raw revert reason as a data argument to a
            // new custom error.
            revert ConduitErrorRevertBytes(data, conduitKey, conduit);
        }
    }

    /**
     * @notice An internal function to check if a recipient address implements
     *         onERC721Received for a given tokenId. Note that this check does
     *         not adhere to the safe transfer specification and is only meant
     *         to provide an additional layer of assurance that the recipient
     *         can receive the tokens — any hooks or post-transfer checks will
     *         fail and the caller will be the transfer helper rather than the
     *         ERC721 contract. Note that the conduit is set as the operator, as
     *         it will be the caller once the transfer is performed.
     *
     * @param conduit   The conduit to provide as the operator when calling
     *                  onERC721Received.
     * @param recipient The ERC721 recipient on which to call onERC721Received.
     * @param tokenId   The ERC721 tokenId of the token being transferred.
     */
    function _checkERC721Receiver(
        address conduit,
        address recipient,
        uint256 tokenId
    ) internal {
        // Check if recipient can receive ERC721 tokens.
        try
            IERC721Receiver(recipient).onERC721Received(
                conduit,
                msg.sender,
                tokenId,
                ""
            )
        returns (bytes4 selector) {
            // Check if onERC721Received selector is valid.
            if (selector != IERC721Receiver.onERC721Received.selector) {
                // Revert if recipient cannot accept
                // ERC721 tokens.
                revert InvalidERC721Recipient(recipient);
            }
        } catch (bytes memory data) {
            // "Bubble up" recipient's revert reason.
            revert ERC721ReceiverErrorRevertBytes(
                data,
                recipient,
                msg.sender,
                tokenId
            );
        } catch Error(string memory reason) {
            // "Bubble up" recipient's revert reason.
            revert ERC721ReceiverErrorRevertString(
                reason,
                recipient,
                msg.sender,
                tokenId
            );
        }
    }

    /**
     * @notice An internal function that reverts if the passed-in recipient
     *         is the zero address.
     *
     * @param recipient The recipient on which to perform the check.
     */
    function _checkRecipientIsNotZeroAddress(address recipient) internal pure {
        // Revert if the recipient is the zero address.
        if (recipient == address(0x0)) {
            revert RecipientCannotBeZeroAddress();
        }
    }
}

File 2 of 14 : IERC721Receiver.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

interface IERC721Receiver {
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

File 3 of 14 : TransferHelperStructs.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import { ConduitItemType } from "../conduit/lib/ConduitEnums.sol";

/**
 * @dev A TransferHelperItem specifies the itemType (ERC20/ERC721/ERC1155),
 *      token address, token identifier, and amount of the token to be
 *      transferred via the TransferHelper. For ERC20 tokens, identifier
 *      must be 0. For ERC721 tokens, amount must be 1.
 */
struct TransferHelperItem {
    ConduitItemType itemType;
    address token;
    uint256 identifier;
    uint256 amount;
}

/**
 * @dev A TransferHelperItemsWithRecipient specifies the tokens to transfer
 *      via the TransferHelper, their intended recipient, and a boolean flag
 *      indicating whether onERC721Received should be called on a recipient
 *      contract.
 */
struct TransferHelperItemsWithRecipient {
    TransferHelperItem[] items;
    address recipient;
    bool validateERC721Receiver;
}

File 4 of 14 : ConduitInterface.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import {
    ConduitTransfer,
    ConduitBatch1155Transfer
} from "../conduit/lib/ConduitStructs.sol";

/**
 * @title ConduitInterface
 * @author 0age
 * @notice ConduitInterface contains all external function interfaces, events,
 *         and errors for conduit contracts.
 */
interface ConduitInterface {
    /**
     * @dev Revert with an error when attempting to execute transfers using a
     *      caller that does not have an open channel.
     */
    error ChannelClosed(address channel);

    /**
     * @dev Revert with an error when attempting to update a channel to the
     *      current status of that channel.
     */
    error ChannelStatusAlreadySet(address channel, bool isOpen);

    /**
     * @dev Revert with an error when attempting to execute a transfer for an
     *      item that does not have an ERC20/721/1155 item type.
     */
    error InvalidItemType();

    /**
     * @dev Revert with an error when attempting to update the status of a
     *      channel from a caller that is not the conduit controller.
     */
    error InvalidController();

    /**
     * @dev Emit an event whenever a channel is opened or closed.
     *
     * @param channel The channel that has been updated.
     * @param open    A boolean indicating whether the conduit is open or not.
     */
    event ChannelUpdated(address indexed channel, bool open);

    /**
     * @notice Execute a sequence of ERC20/721/1155 transfers. Only a caller
     *         with an open channel can call this function.
     *
     * @param transfers The ERC20/721/1155 transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function execute(ConduitTransfer[] calldata transfers)
        external
        returns (bytes4 magicValue);

    /**
     * @notice Execute a sequence of batch 1155 transfers. Only a caller with an
     *         open channel can call this function.
     *
     * @param batch1155Transfers The 1155 batch transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function executeBatch1155(
        ConduitBatch1155Transfer[] calldata batch1155Transfers
    ) external returns (bytes4 magicValue);

    /**
     * @notice Execute a sequence of transfers, both single and batch 1155. Only
     *         a caller with an open channel can call this function.
     *
     * @param standardTransfers  The ERC20/721/1155 transfers to perform.
     * @param batch1155Transfers The 1155 batch transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function executeWithBatch1155(
        ConduitTransfer[] calldata standardTransfers,
        ConduitBatch1155Transfer[] calldata batch1155Transfers
    ) external returns (bytes4 magicValue);

    /**
     * @notice Open or close a given channel. Only callable by the controller.
     *
     * @param channel The channel to open or close.
     * @param isOpen  The status of the channel (either open or closed).
     */
    function updateChannel(address channel, bool isOpen) external;
}

File 5 of 14 : ConduitControllerInterface.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

/**
 * @title ConduitControllerInterface
 * @author 0age
 * @notice ConduitControllerInterface contains all external function interfaces,
 *         structs, events, and errors for the conduit controller.
 */
interface ConduitControllerInterface {
    /**
     * @dev Track the conduit key, current owner, new potential owner, and open
     *      channels for each deployed conduit.
     */
    struct ConduitProperties {
        bytes32 key;
        address owner;
        address potentialOwner;
        address[] channels;
        mapping(address => uint256) channelIndexesPlusOne;
    }

    /**
     * @dev Emit an event whenever a new conduit is created.
     *
     * @param conduit    The newly created conduit.
     * @param conduitKey The conduit key used to create the new conduit.
     */
    event NewConduit(address conduit, bytes32 conduitKey);

    /**
     * @dev Emit an event whenever conduit ownership is transferred.
     *
     * @param conduit       The conduit for which ownership has been
     *                      transferred.
     * @param previousOwner The previous owner of the conduit.
     * @param newOwner      The new owner of the conduit.
     */
    event OwnershipTransferred(
        address indexed conduit,
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Emit an event whenever a conduit owner registers a new potential
     *      owner for that conduit.
     *
     * @param newPotentialOwner The new potential owner of the conduit.
     */
    event PotentialOwnerUpdated(address indexed newPotentialOwner);

    /**
     * @dev Revert with an error when attempting to create a new conduit using a
     *      conduit key where the first twenty bytes of the key do not match the
     *      address of the caller.
     */
    error InvalidCreator();

    /**
     * @dev Revert with an error when attempting to create a new conduit when no
     *      initial owner address is supplied.
     */
    error InvalidInitialOwner();

    /**
     * @dev Revert with an error when attempting to set a new potential owner
     *      that is already set.
     */
    error NewPotentialOwnerAlreadySet(
        address conduit,
        address newPotentialOwner
    );

    /**
     * @dev Revert with an error when attempting to cancel ownership transfer
     *      when no new potential owner is currently set.
     */
    error NoPotentialOwnerCurrentlySet(address conduit);

    /**
     * @dev Revert with an error when attempting to interact with a conduit that
     *      does not yet exist.
     */
    error NoConduit();

    /**
     * @dev Revert with an error when attempting to create a conduit that
     *      already exists.
     */
    error ConduitAlreadyExists(address conduit);

    /**
     * @dev Revert with an error when attempting to update channels or transfer
     *      ownership of a conduit when the caller is not the owner of the
     *      conduit in question.
     */
    error CallerIsNotOwner(address conduit);

    /**
     * @dev Revert with an error when attempting to register a new potential
     *      owner and supplying the null address.
     */
    error NewPotentialOwnerIsZeroAddress(address conduit);

    /**
     * @dev Revert with an error when attempting to claim ownership of a conduit
     *      with a caller that is not the current potential owner for the
     *      conduit in question.
     */
    error CallerIsNotNewPotentialOwner(address conduit);

    /**
     * @dev Revert with an error when attempting to retrieve a channel using an
     *      index that is out of range.
     */
    error ChannelOutOfRange(address conduit);

    /**
     * @notice Deploy a new conduit using a supplied conduit key and assigning
     *         an initial owner for the deployed conduit. Note that the first
     *         twenty bytes of the supplied conduit key must match the caller
     *         and that a new conduit cannot be created if one has already been
     *         deployed using the same conduit key.
     *
     * @param conduitKey   The conduit key used to deploy the conduit. Note that
     *                     the first twenty bytes of the conduit key must match
     *                     the caller of this contract.
     * @param initialOwner The initial owner to set for the new conduit.
     *
     * @return conduit The address of the newly deployed conduit.
     */
    function createConduit(bytes32 conduitKey, address initialOwner)
        external
        returns (address conduit);

    /**
     * @notice Open or close a channel on a given conduit, thereby allowing the
     *         specified account to execute transfers against that conduit.
     *         Extreme care must be taken when updating channels, as malicious
     *         or vulnerable channels can transfer any ERC20, ERC721 and ERC1155
     *         tokens where the token holder has granted the conduit approval.
     *         Only the owner of the conduit in question may call this function.
     *
     * @param conduit The conduit for which to open or close the channel.
     * @param channel The channel to open or close on the conduit.
     * @param isOpen  A boolean indicating whether to open or close the channel.
     */
    function updateChannel(
        address conduit,
        address channel,
        bool isOpen
    ) external;

    /**
     * @notice Initiate conduit ownership transfer by assigning a new potential
     *         owner for the given conduit. Once set, the new potential owner
     *         may call `acceptOwnership` to claim ownership of the conduit.
     *         Only the owner of the conduit in question may call this function.
     *
     * @param conduit The conduit for which to initiate ownership transfer.
     * @param newPotentialOwner The new potential owner of the conduit.
     */
    function transferOwnership(address conduit, address newPotentialOwner)
        external;

    /**
     * @notice Clear the currently set potential owner, if any, from a conduit.
     *         Only the owner of the conduit in question may call this function.
     *
     * @param conduit The conduit for which to cancel ownership transfer.
     */
    function cancelOwnershipTransfer(address conduit) external;

    /**
     * @notice Accept ownership of a supplied conduit. Only accounts that the
     *         current owner has set as the new potential owner may call this
     *         function.
     *
     * @param conduit The conduit for which to accept ownership.
     */
    function acceptOwnership(address conduit) external;

    /**
     * @notice Retrieve the current owner of a deployed conduit.
     *
     * @param conduit The conduit for which to retrieve the associated owner.
     *
     * @return owner The owner of the supplied conduit.
     */
    function ownerOf(address conduit) external view returns (address owner);

    /**
     * @notice Retrieve the conduit key for a deployed conduit via reverse
     *         lookup.
     *
     * @param conduit The conduit for which to retrieve the associated conduit
     *                key.
     *
     * @return conduitKey The conduit key used to deploy the supplied conduit.
     */
    function getKey(address conduit) external view returns (bytes32 conduitKey);

    /**
     * @notice Derive the conduit associated with a given conduit key and
     *         determine whether that conduit exists (i.e. whether it has been
     *         deployed).
     *
     * @param conduitKey The conduit key used to derive the conduit.
     *
     * @return conduit The derived address of the conduit.
     * @return exists  A boolean indicating whether the derived conduit has been
     *                 deployed or not.
     */
    function getConduit(bytes32 conduitKey)
        external
        view
        returns (address conduit, bool exists);

    /**
     * @notice Retrieve the potential owner, if any, for a given conduit. The
     *         current owner may set a new potential owner via
     *         `transferOwnership` and that owner may then accept ownership of
     *         the conduit in question via `acceptOwnership`.
     *
     * @param conduit The conduit for which to retrieve the potential owner.
     *
     * @return potentialOwner The potential owner, if any, for the conduit.
     */
    function getPotentialOwner(address conduit)
        external
        view
        returns (address potentialOwner);

    /**
     * @notice Retrieve the status (either open or closed) of a given channel on
     *         a conduit.
     *
     * @param conduit The conduit for which to retrieve the channel status.
     * @param channel The channel for which to retrieve the status.
     *
     * @return isOpen The status of the channel on the given conduit.
     */
    function getChannelStatus(address conduit, address channel)
        external
        view
        returns (bool isOpen);

    /**
     * @notice Retrieve the total number of open channels for a given conduit.
     *
     * @param conduit The conduit for which to retrieve the total channel count.
     *
     * @return totalChannels The total number of open channels for the conduit.
     */
    function getTotalChannels(address conduit)
        external
        view
        returns (uint256 totalChannels);

    /**
     * @notice Retrieve an open channel at a specific index for a given conduit.
     *         Note that the index of a channel can change as a result of other
     *         channels being closed on the conduit.
     *
     * @param conduit      The conduit for which to retrieve the open channel.
     * @param channelIndex The index of the channel in question.
     *
     * @return channel The open channel, if any, at the specified channel index.
     */
    function getChannel(address conduit, uint256 channelIndex)
        external
        view
        returns (address channel);

    /**
     * @notice Retrieve all open channels for a given conduit. Note that calling
     *         this function for a conduit with many channels will revert with
     *         an out-of-gas error.
     *
     * @param conduit The conduit for which to retrieve open channels.
     *
     * @return channels An array of open channels on the given conduit.
     */
    function getChannels(address conduit)
        external
        view
        returns (address[] memory channels);

    /**
     * @dev Retrieve the conduit creation code and runtime code hashes.
     */
    function getConduitCodeHashes()
        external
        view
        returns (bytes32 creationCodeHash, bytes32 runtimeCodeHash);
}

File 6 of 14 : Conduit.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import { ConduitInterface } from "../interfaces/ConduitInterface.sol";

import { ConduitItemType } from "./lib/ConduitEnums.sol";

import { TokenTransferrer } from "../lib/TokenTransferrer.sol";

import {
    ConduitTransfer,
    ConduitBatch1155Transfer
} from "./lib/ConduitStructs.sol";

import "./lib/ConduitConstants.sol";

/**
 * @title Conduit
 * @author 0age
 * @notice This contract serves as an originator for "proxied" transfers. Each
 *         conduit is deployed and controlled by a "conduit controller" that can
 *         add and remove "channels" or contracts that can instruct the conduit
 *         to transfer approved ERC20/721/1155 tokens. *IMPORTANT NOTE: each
 *         conduit has an owner that can arbitrarily add or remove channels, and
 *         a malicious or negligent owner can add a channel that allows for any
 *         approved ERC20/721/1155 tokens to be taken immediately — be extremely
 *         cautious with what conduits you give token approvals to!*
 */
contract Conduit is ConduitInterface, TokenTransferrer {
    // Set deployer as an immutable controller that can update channel statuses.
    address private immutable _controller;

    // Track the status of each channel.
    mapping(address => bool) private _channels;

    /**
     * @notice Ensure that the caller is currently registered as an open channel
     *         on the conduit.
     */
    modifier onlyOpenChannel() {
        // Utilize assembly to access channel storage mapping directly.
        assembly {
            // Write the caller to scratch space.
            mstore(ChannelKey_channel_ptr, caller())

            // Write the storage slot for _channels to scratch space.
            mstore(ChannelKey_slot_ptr, _channels.slot)

            // Derive the position in storage of _channels[msg.sender]
            // and check if the stored value is zero.
            if iszero(
                sload(keccak256(ChannelKey_channel_ptr, ChannelKey_length))
            ) {
                // The caller is not an open channel; revert with
                // ChannelClosed(caller). First, set error signature in memory.
                mstore(ChannelClosed_error_ptr, ChannelClosed_error_signature)

                // Next, set the caller as the argument.
                mstore(ChannelClosed_channel_ptr, caller())

                // Finally, revert, returning full custom error with argument.
                revert(ChannelClosed_error_ptr, ChannelClosed_error_length)
            }
        }

        // Continue with function execution.
        _;
    }

    /**
     * @notice In the constructor, set the deployer as the controller.
     */
    constructor() {
        // Set the deployer as the controller.
        _controller = msg.sender;
    }

    /**
     * @notice Execute a sequence of ERC20/721/1155 transfers. Only a caller
     *         with an open channel can call this function. Note that channels
     *         are expected to implement reentrancy protection if desired, and
     *         that cross-channel reentrancy may be possible if the conduit has
     *         multiple open channels at once. Also note that channels are
     *         expected to implement checks against transferring any zero-amount
     *         items if that constraint is desired.
     *
     * @param transfers The ERC20/721/1155 transfers to perform.
     *
     * @return magicValue A magic value indicating that the transfers were
     *                    performed successfully.
     */
    function execute(ConduitTransfer[] calldata transfers)
        external
        override
        onlyOpenChannel
        returns (bytes4 magicValue)
    {
        // Retrieve the total number of transfers and place on the stack.
        uint256 totalStandardTransfers = transfers.length;

        // Iterate over each transfer.
        for (uint256 i = 0; i < totalStandardTransfers; ) {
            // Retrieve the transfer in question and perform the transfer.
            _transfer(transfers[i]);

            // Skip overflow check as for loop is indexed starting at zero.
            unchecked {
                ++i;
            }
        }

        // Return a magic value indicating that the transfers were performed.
        magicValue = this.execute.selector;
    }

    /**
     * @notice Execute a sequence of batch 1155 item transfers. Only a caller
     *         with an open channel can call this function. Note that channels
     *         are expected to implement reentrancy protection if desired, and
     *         that cross-channel reentrancy may be possible if the conduit has
     *         multiple open channels at once. Also note that channels are
     *         expected to implement checks against transferring any zero-amount
     *         items if that constraint is desired.
     *
     * @param batchTransfers The 1155 batch item transfers to perform.
     *
     * @return magicValue A magic value indicating that the item transfers were
     *                    performed successfully.
     */
    function executeBatch1155(
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) external override onlyOpenChannel returns (bytes4 magicValue) {
        // Perform 1155 batch transfers. Note that memory should be considered
        // entirely corrupted from this point forward.
        _performERC1155BatchTransfers(batchTransfers);

        // Return a magic value indicating that the transfers were performed.
        magicValue = this.executeBatch1155.selector;
    }

    /**
     * @notice Execute a sequence of transfers, both single ERC20/721/1155 item
     *         transfers as well as batch 1155 item transfers. Only a caller
     *         with an open channel can call this function. Note that channels
     *         are expected to implement reentrancy protection if desired, and
     *         that cross-channel reentrancy may be possible if the conduit has
     *         multiple open channels at once. Also note that channels are
     *         expected to implement checks against transferring any zero-amount
     *         items if that constraint is desired.
     *
     * @param standardTransfers The ERC20/721/1155 item transfers to perform.
     * @param batchTransfers    The 1155 batch item transfers to perform.
     *
     * @return magicValue A magic value indicating that the item transfers were
     *                    performed successfully.
     */
    function executeWithBatch1155(
        ConduitTransfer[] calldata standardTransfers,
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) external override onlyOpenChannel returns (bytes4 magicValue) {
        // Retrieve the total number of transfers and place on the stack.
        uint256 totalStandardTransfers = standardTransfers.length;

        // Iterate over each standard transfer.
        for (uint256 i = 0; i < totalStandardTransfers; ) {
            // Retrieve the transfer in question and perform the transfer.
            _transfer(standardTransfers[i]);

            // Skip overflow check as for loop is indexed starting at zero.
            unchecked {
                ++i;
            }
        }

        // Perform 1155 batch transfers. Note that memory should be considered
        // entirely corrupted from this point forward aside from the free memory
        // pointer having the default value.
        _performERC1155BatchTransfers(batchTransfers);

        // Return a magic value indicating that the transfers were performed.
        magicValue = this.executeWithBatch1155.selector;
    }

    /**
     * @notice Open or close a given channel. Only callable by the controller.
     *
     * @param channel The channel to open or close.
     * @param isOpen  The status of the channel (either open or closed).
     */
    function updateChannel(address channel, bool isOpen) external override {
        // Ensure that the caller is the controller of this contract.
        if (msg.sender != _controller) {
            revert InvalidController();
        }

        // Ensure that the channel does not already have the indicated status.
        if (_channels[channel] == isOpen) {
            revert ChannelStatusAlreadySet(channel, isOpen);
        }

        // Update the status of the channel.
        _channels[channel] = isOpen;

        // Emit a corresponding event.
        emit ChannelUpdated(channel, isOpen);
    }

    /**
     * @dev Internal function to transfer a given ERC20/721/1155 item. Note that
     *      channels are expected to implement checks against transferring any
     *      zero-amount items if that constraint is desired.
     *
     * @param item The ERC20/721/1155 item to transfer.
     */
    function _transfer(ConduitTransfer calldata item) internal {
        // Determine the transfer method based on the respective item type.
        if (item.itemType == ConduitItemType.ERC20) {
            // Transfer ERC20 token. Note that item.identifier is ignored and
            // therefore ERC20 transfer items are potentially malleable — this
            // check should be performed by the calling channel if a constraint
            // on item malleability is desired.
            _performERC20Transfer(item.token, item.from, item.to, item.amount);
        } else if (item.itemType == ConduitItemType.ERC721) {
            // Ensure that exactly one 721 item is being transferred.
            if (item.amount != 1) {
                revert InvalidERC721TransferAmount();
            }

            // Transfer ERC721 token.
            _performERC721Transfer(
                item.token,
                item.from,
                item.to,
                item.identifier
            );
        } else if (item.itemType == ConduitItemType.ERC1155) {
            // Transfer ERC1155 token.
            _performERC1155Transfer(
                item.token,
                item.from,
                item.to,
                item.identifier,
                item.amount
            );
        } else {
            // Throw with an error.
            revert InvalidItemType();
        }
    }
}

File 7 of 14 : ConduitStructs.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import { ConduitItemType } from "./ConduitEnums.sol";

struct ConduitTransfer {
    ConduitItemType itemType;
    address token;
    address from;
    address to;
    uint256 identifier;
    uint256 amount;
}

struct ConduitBatch1155Transfer {
    address token;
    address from;
    address to;
    uint256[] ids;
    uint256[] amounts;
}

File 8 of 14 : TransferHelperInterface.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import {
    TransferHelperItem,
    TransferHelperItemsWithRecipient
} from "../helpers/TransferHelperStructs.sol";

interface TransferHelperInterface {
    /**
     * @notice Transfer multiple items to a single recipient.
     *
     * @param items The items to transfer.
     * @param conduitKey  The key of the conduit performing the bulk transfer.
     */
    function bulkTransfer(
        TransferHelperItemsWithRecipient[] calldata items,
        bytes32 conduitKey
    ) external returns (bytes4);
}

File 9 of 14 : TransferHelperErrors.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

/**
 * @title TransferHelperErrors
 */
interface TransferHelperErrors {
    /**
     * @dev Revert with an error when attempting to execute transfers with a
     *      NATIVE itemType.
     */
    error InvalidItemType();

    /**
     * @dev Revert with an error when an ERC721 transfer with amount other than
     *      one is attempted.
     */
    error InvalidERC721TransferAmount();

    /**
     * @dev Revert with an error when attempting to execute an ERC721 transfer
     *      to an invalid recipient.
     */
    error InvalidERC721Recipient(address recipient);

    /**
     * @dev Revert with an error when a call to a ERC721 receiver reverts with
     *      bytes data.
     */
    error ERC721ReceiverErrorRevertBytes(
        bytes reason,
        address receiver,
        address sender,
        uint256 identifier
    );

    /**
     * @dev Revert with an error when a call to a ERC721 receiver reverts with
     *      string reason.
     */
    error ERC721ReceiverErrorRevertString(
        string reason,
        address receiver,
        address sender,
        uint256 identifier
    );

    /**
     * @dev Revert with an error when an ERC20 token has an invalid identifier.
     */
    error InvalidERC20Identifier();

    /**
     * @dev Revert with an error if the recipient is the zero address.
     */
    error RecipientCannotBeZeroAddress();

    /**
     * @dev Revert with an error when attempting to fill an order referencing an
     *      invalid conduit (i.e. one that has not been deployed).
     */
    error InvalidConduit(bytes32 conduitKey, address conduit);

    /**
     * @dev Revert with an error when a call to a conduit reverts with a
     *      reason string.
     */
    error ConduitErrorRevertString(
        string reason,
        bytes32 conduitKey,
        address conduit
    );

    /**
     * @dev Revert with an error when a call to a conduit reverts with bytes
     *      data.
     */
    error ConduitErrorRevertBytes(
        bytes reason,
        bytes32 conduitKey,
        address conduit
    );
}

File 10 of 14 : ConduitEnums.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

enum ConduitItemType {
    NATIVE, // unused
    ERC20,
    ERC721,
    ERC1155
}

File 11 of 14 : TokenTransferrer.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

import "./TokenTransferrerConstants.sol";

import {
    TokenTransferrerErrors
} from "../interfaces/TokenTransferrerErrors.sol";

import { ConduitBatch1155Transfer } from "../conduit/lib/ConduitStructs.sol";

/**
 * @title TokenTransferrer
 * @author 0age
 * @custom:coauthor d1ll0n
 * @custom:coauthor transmissions11
 * @notice TokenTransferrer is a library for performing optimized ERC20, ERC721,
 *         ERC1155, and batch ERC1155 transfers, used by both Seaport as well as
 *         by conduits deployed by the ConduitController. Use great caution when
 *         considering these functions for use in other codebases, as there are
 *         significant side effects and edge cases that need to be thoroughly
 *         understood and carefully addressed.
 */
contract TokenTransferrer is TokenTransferrerErrors {
    /**
     * @dev Internal function to transfer ERC20 tokens from a given originator
     *      to a given recipient. Sufficient approvals must be set on the
     *      contract performing the transfer.
     *
     * @param token      The ERC20 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param amount     The amount to transfer.
     */
    function _performERC20Transfer(
        address token,
        address from,
        address to,
        uint256 amount
    ) internal {
        // Utilize assembly to perform an optimized ERC20 token transfer.
        assembly {
            // The free memory pointer memory slot will be used when populating
            // call data for the transfer; read the value and restore it later.
            let memPointer := mload(FreeMemoryPointerSlot)

            // Write call data into memory, starting with function selector.
            mstore(ERC20_transferFrom_sig_ptr, ERC20_transferFrom_signature)
            mstore(ERC20_transferFrom_from_ptr, from)
            mstore(ERC20_transferFrom_to_ptr, to)
            mstore(ERC20_transferFrom_amount_ptr, amount)

            // Make call & copy up to 32 bytes of return data to scratch space.
            // Scratch space does not need to be cleared ahead of time, as the
            // subsequent check will ensure that either at least a full word of
            // return data is received (in which case it will be overwritten) or
            // that no data is received (in which case scratch space will be
            // ignored) on a successful call to the given token.
            let callStatus := call(
                gas(),
                token,
                0,
                ERC20_transferFrom_sig_ptr,
                ERC20_transferFrom_length,
                0,
                OneWord
            )

            // Determine whether transfer was successful using status & result.
            let success := and(
                // Set success to whether the call reverted, if not check it
                // either returned exactly 1 (can't just be non-zero data), or
                // had no return data.
                or(
                    and(eq(mload(0), 1), gt(returndatasize(), 31)),
                    iszero(returndatasize())
                ),
                callStatus
            )

            // Handle cases where either the transfer failed or no data was
            // returned. Group these, as most transfers will succeed with data.
            // Equivalent to `or(iszero(success), iszero(returndatasize()))`
            // but after it's inverted for JUMPI this expression is cheaper.
            if iszero(and(success, iszero(iszero(returndatasize())))) {
                // If the token has no code or the transfer failed: Equivalent
                // to `or(iszero(success), iszero(extcodesize(token)))` but
                // after it's inverted for JUMPI this expression is cheaper.
                if iszero(and(iszero(iszero(extcodesize(token))), success)) {
                    // If the transfer failed:
                    if iszero(success) {
                        // If it was due to a revert:
                        if iszero(callStatus) {
                            // If it returned a message, bubble it up as long as
                            // sufficient gas remains to do so:
                            if returndatasize() {
                                // Ensure that sufficient gas is available to
                                // copy returndata while expanding memory where
                                // necessary. Start by computing the word size
                                // of returndata and allocated memory. Round up
                                // to the nearest full word.
                                let returnDataWords := div(
                                    add(returndatasize(), AlmostOneWord),
                                    OneWord
                                )

                                // Note: use the free memory pointer in place of
                                // msize() to work around a Yul warning that
                                // prevents accessing msize directly when the IR
                                // pipeline is activated.
                                let msizeWords := div(memPointer, OneWord)

                                // Next, compute the cost of the returndatacopy.
                                let cost := mul(CostPerWord, returnDataWords)

                                // Then, compute cost of new memory allocation.
                                if gt(returnDataWords, msizeWords) {
                                    cost := add(
                                        cost,
                                        add(
                                            mul(
                                                sub(
                                                    returnDataWords,
                                                    msizeWords
                                                ),
                                                CostPerWord
                                            ),
                                            div(
                                                sub(
                                                    mul(
                                                        returnDataWords,
                                                        returnDataWords
                                                    ),
                                                    mul(msizeWords, msizeWords)
                                                ),
                                                MemoryExpansionCoefficient
                                            )
                                        )
                                    )
                                }

                                // Finally, add a small constant and compare to
                                // gas remaining; bubble up the revert data if
                                // enough gas is still available.
                                if lt(add(cost, ExtraGasBuffer), gas()) {
                                    // Copy returndata to memory; overwrite
                                    // existing memory.
                                    returndatacopy(0, 0, returndatasize())

                                    // Revert, specifying memory region with
                                    // copied returndata.
                                    revert(0, returndatasize())
                                }
                            }

                            // Otherwise revert with a generic error message.
                            mstore(
                                TokenTransferGenericFailure_error_sig_ptr,
                                TokenTransferGenericFailure_error_signature
                            )
                            mstore(
                                TokenTransferGenericFailure_error_token_ptr,
                                token
                            )
                            mstore(
                                TokenTransferGenericFailure_error_from_ptr,
                                from
                            )
                            mstore(TokenTransferGenericFailure_error_to_ptr, to)
                            mstore(TokenTransferGenericFailure_error_id_ptr, 0)
                            mstore(
                                TokenTransferGenericFailure_error_amount_ptr,
                                amount
                            )
                            revert(
                                TokenTransferGenericFailure_error_sig_ptr,
                                TokenTransferGenericFailure_error_length
                            )
                        }

                        // Otherwise revert with a message about the token
                        // returning false or non-compliant return values.
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_sig_ptr,
                            BadReturnValueFromERC20OnTransfer_error_signature
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_token_ptr,
                            token
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_from_ptr,
                            from
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_to_ptr,
                            to
                        )
                        mstore(
                            BadReturnValueFromERC20OnTransfer_error_amount_ptr,
                            amount
                        )
                        revert(
                            BadReturnValueFromERC20OnTransfer_error_sig_ptr,
                            BadReturnValueFromERC20OnTransfer_error_length
                        )
                    }

                    // Otherwise, revert with error about token not having code:
                    mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                    mstore(NoContract_error_token_ptr, token)
                    revert(NoContract_error_sig_ptr, NoContract_error_length)
                }

                // Otherwise, the token just returned no data despite the call
                // having succeeded; no need to optimize for this as it's not
                // technically ERC20 compliant.
            }

            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)

            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }

    /**
     * @dev Internal function to transfer an ERC721 token from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer. Note that this function does
     *      not check whether the receiver can accept the ERC721 token (i.e. it
     *      does not use `safeTransferFrom`).
     *
     * @param token      The ERC721 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param identifier The tokenId to transfer.
     */
    function _performERC721Transfer(
        address token,
        address from,
        address to,
        uint256 identifier
    ) internal {
        // Utilize assembly to perform an optimized ERC721 token transfer.
        assembly {
            // If the token has no code, revert.
            if iszero(extcodesize(token)) {
                mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                mstore(NoContract_error_token_ptr, token)
                revert(NoContract_error_sig_ptr, NoContract_error_length)
            }

            // The free memory pointer memory slot will be used when populating
            // call data for the transfer; read the value and restore it later.
            let memPointer := mload(FreeMemoryPointerSlot)

            // Write call data to memory starting with function selector.
            mstore(ERC721_transferFrom_sig_ptr, ERC721_transferFrom_signature)
            mstore(ERC721_transferFrom_from_ptr, from)
            mstore(ERC721_transferFrom_to_ptr, to)
            mstore(ERC721_transferFrom_id_ptr, identifier)

            // Perform the call, ignoring return data.
            let success := call(
                gas(),
                token,
                0,
                ERC721_transferFrom_sig_ptr,
                ERC721_transferFrom_length,
                0,
                0
            )

            // If the transfer reverted:
            if iszero(success) {
                // If it returned a message, bubble it up as long as sufficient
                // gas remains to do so:
                if returndatasize() {
                    // Ensure that sufficient gas is available to copy
                    // returndata while expanding memory where necessary. Start
                    // by computing word size of returndata & allocated memory.
                    // Round up to the nearest full word.
                    let returnDataWords := div(
                        add(returndatasize(), AlmostOneWord),
                        OneWord
                    )

                    // Note: use the free memory pointer in place of msize() to
                    // work around a Yul warning that prevents accessing msize
                    // directly when the IR pipeline is activated.
                    let msizeWords := div(memPointer, OneWord)

                    // Next, compute the cost of the returndatacopy.
                    let cost := mul(CostPerWord, returnDataWords)

                    // Then, compute cost of new memory allocation.
                    if gt(returnDataWords, msizeWords) {
                        cost := add(
                            cost,
                            add(
                                mul(
                                    sub(returnDataWords, msizeWords),
                                    CostPerWord
                                ),
                                div(
                                    sub(
                                        mul(returnDataWords, returnDataWords),
                                        mul(msizeWords, msizeWords)
                                    ),
                                    MemoryExpansionCoefficient
                                )
                            )
                        )
                    }

                    // Finally, add a small constant and compare to gas
                    // remaining; bubble up the revert data if enough gas is
                    // still available.
                    if lt(add(cost, ExtraGasBuffer), gas()) {
                        // Copy returndata to memory; overwrite existing memory.
                        returndatacopy(0, 0, returndatasize())

                        // Revert, giving memory region with copied returndata.
                        revert(0, returndatasize())
                    }
                }

                // Otherwise revert with a generic error message.
                mstore(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_signature
                )
                mstore(TokenTransferGenericFailure_error_token_ptr, token)
                mstore(TokenTransferGenericFailure_error_from_ptr, from)
                mstore(TokenTransferGenericFailure_error_to_ptr, to)
                mstore(TokenTransferGenericFailure_error_id_ptr, identifier)
                mstore(TokenTransferGenericFailure_error_amount_ptr, 1)
                revert(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_length
                )
            }

            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)

            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }

    /**
     * @dev Internal function to transfer ERC1155 tokens from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer and contract recipients must
     *      implement the ERC1155TokenReceiver interface to indicate that they
     *      are willing to accept the transfer.
     *
     * @param token      The ERC1155 token to transfer.
     * @param from       The originator of the transfer.
     * @param to         The recipient of the transfer.
     * @param identifier The id to transfer.
     * @param amount     The amount to transfer.
     */
    function _performERC1155Transfer(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount
    ) internal {
        // Utilize assembly to perform an optimized ERC1155 token transfer.
        assembly {
            // If the token has no code, revert.
            if iszero(extcodesize(token)) {
                mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                mstore(NoContract_error_token_ptr, token)
                revert(NoContract_error_sig_ptr, NoContract_error_length)
            }

            // The following memory slots will be used when populating call data
            // for the transfer; read the values and restore them later.
            let memPointer := mload(FreeMemoryPointerSlot)
            let slot0x80 := mload(Slot0x80)
            let slot0xA0 := mload(Slot0xA0)
            let slot0xC0 := mload(Slot0xC0)

            // Write call data into memory, beginning with function selector.
            mstore(
                ERC1155_safeTransferFrom_sig_ptr,
                ERC1155_safeTransferFrom_signature
            )
            mstore(ERC1155_safeTransferFrom_from_ptr, from)
            mstore(ERC1155_safeTransferFrom_to_ptr, to)
            mstore(ERC1155_safeTransferFrom_id_ptr, identifier)
            mstore(ERC1155_safeTransferFrom_amount_ptr, amount)
            mstore(
                ERC1155_safeTransferFrom_data_offset_ptr,
                ERC1155_safeTransferFrom_data_length_offset
            )
            mstore(ERC1155_safeTransferFrom_data_length_ptr, 0)

            // Perform the call, ignoring return data.
            let success := call(
                gas(),
                token,
                0,
                ERC1155_safeTransferFrom_sig_ptr,
                ERC1155_safeTransferFrom_length,
                0,
                0
            )

            // If the transfer reverted:
            if iszero(success) {
                // If it returned a message, bubble it up as long as sufficient
                // gas remains to do so:
                if returndatasize() {
                    // Ensure that sufficient gas is available to copy
                    // returndata while expanding memory where necessary. Start
                    // by computing word size of returndata & allocated memory.
                    // Round up to the nearest full word.
                    let returnDataWords := div(
                        add(returndatasize(), AlmostOneWord),
                        OneWord
                    )

                    // Note: use the free memory pointer in place of msize() to
                    // work around a Yul warning that prevents accessing msize
                    // directly when the IR pipeline is activated.
                    let msizeWords := div(memPointer, OneWord)

                    // Next, compute the cost of the returndatacopy.
                    let cost := mul(CostPerWord, returnDataWords)

                    // Then, compute cost of new memory allocation.
                    if gt(returnDataWords, msizeWords) {
                        cost := add(
                            cost,
                            add(
                                mul(
                                    sub(returnDataWords, msizeWords),
                                    CostPerWord
                                ),
                                div(
                                    sub(
                                        mul(returnDataWords, returnDataWords),
                                        mul(msizeWords, msizeWords)
                                    ),
                                    MemoryExpansionCoefficient
                                )
                            )
                        )
                    }

                    // Finally, add a small constant and compare to gas
                    // remaining; bubble up the revert data if enough gas is
                    // still available.
                    if lt(add(cost, ExtraGasBuffer), gas()) {
                        // Copy returndata to memory; overwrite existing memory.
                        returndatacopy(0, 0, returndatasize())

                        // Revert, giving memory region with copied returndata.
                        revert(0, returndatasize())
                    }
                }

                // Otherwise revert with a generic error message.
                mstore(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_signature
                )
                mstore(TokenTransferGenericFailure_error_token_ptr, token)
                mstore(TokenTransferGenericFailure_error_from_ptr, from)
                mstore(TokenTransferGenericFailure_error_to_ptr, to)
                mstore(TokenTransferGenericFailure_error_id_ptr, identifier)
                mstore(TokenTransferGenericFailure_error_amount_ptr, amount)
                revert(
                    TokenTransferGenericFailure_error_sig_ptr,
                    TokenTransferGenericFailure_error_length
                )
            }

            mstore(Slot0x80, slot0x80) // Restore slot 0x80.
            mstore(Slot0xA0, slot0xA0) // Restore slot 0xA0.
            mstore(Slot0xC0, slot0xC0) // Restore slot 0xC0.

            // Restore the original free memory pointer.
            mstore(FreeMemoryPointerSlot, memPointer)

            // Restore the zero slot to zero.
            mstore(ZeroSlot, 0)
        }
    }

    /**
     * @dev Internal function to transfer ERC1155 tokens from a given
     *      originator to a given recipient. Sufficient approvals must be set on
     *      the contract performing the transfer and contract recipients must
     *      implement the ERC1155TokenReceiver interface to indicate that they
     *      are willing to accept the transfer. NOTE: this function is not
     *      memory-safe; it will overwrite existing memory, restore the free
     *      memory pointer to the default value, and overwrite the zero slot.
     *      This function should only be called once memory is no longer
     *      required and when uninitialized arrays are not utilized, and memory
     *      should be considered fully corrupted (aside from the existence of a
     *      default-value free memory pointer) after calling this function.
     *
     * @param batchTransfers The group of 1155 batch transfers to perform.
     */
    function _performERC1155BatchTransfers(
        ConduitBatch1155Transfer[] calldata batchTransfers
    ) internal {
        // Utilize assembly to perform optimized batch 1155 transfers.
        assembly {
            let len := batchTransfers.length
            // Pointer to first head in the array, which is offset to the struct
            // at each index. This gets incremented after each loop to avoid
            // multiplying by 32 to get the offset for each element.
            let nextElementHeadPtr := batchTransfers.offset

            // Pointer to beginning of the head of the array. This is the
            // reference position each offset references. It's held static to
            // let each loop calculate the data position for an element.
            let arrayHeadPtr := nextElementHeadPtr

            // Write the function selector, which will be reused for each call:
            // safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)
            mstore(
                ConduitBatch1155Transfer_from_offset,
                ERC1155_safeBatchTransferFrom_signature
            )

            // Iterate over each batch transfer.
            for {
                let i := 0
            } lt(i, len) {
                i := add(i, 1)
            } {
                // Read the offset to the beginning of the element and add
                // it to pointer to the beginning of the array head to get
                // the absolute position of the element in calldata.
                let elementPtr := add(
                    arrayHeadPtr,
                    calldataload(nextElementHeadPtr)
                )

                // Retrieve the token from calldata.
                let token := calldataload(elementPtr)

                // If the token has no code, revert.
                if iszero(extcodesize(token)) {
                    mstore(NoContract_error_sig_ptr, NoContract_error_signature)
                    mstore(NoContract_error_token_ptr, token)
                    revert(NoContract_error_sig_ptr, NoContract_error_length)
                }

                // Get the total number of supplied ids.
                let idsLength := calldataload(
                    add(elementPtr, ConduitBatch1155Transfer_ids_length_offset)
                )

                // Determine the expected offset for the amounts array.
                let expectedAmountsOffset := add(
                    ConduitBatch1155Transfer_amounts_length_baseOffset,
                    mul(idsLength, OneWord)
                )

                // Validate struct encoding.
                let invalidEncoding := iszero(
                    and(
                        // ids.length == amounts.length
                        eq(
                            idsLength,
                            calldataload(add(elementPtr, expectedAmountsOffset))
                        ),
                        and(
                            // ids_offset == 0xa0
                            eq(
                                calldataload(
                                    add(
                                        elementPtr,
                                        ConduitBatch1155Transfer_ids_head_offset
                                    )
                                ),
                                ConduitBatch1155Transfer_ids_length_offset
                            ),
                            // amounts_offset == 0xc0 + ids.length*32
                            eq(
                                calldataload(
                                    add(
                                        elementPtr,
                                        ConduitBatchTransfer_amounts_head_offset
                                    )
                                ),
                                expectedAmountsOffset
                            )
                        )
                    )
                )

                // Revert with an error if the encoding is not valid.
                if invalidEncoding {
                    mstore(
                        Invalid1155BatchTransferEncoding_ptr,
                        Invalid1155BatchTransferEncoding_selector
                    )
                    revert(
                        Invalid1155BatchTransferEncoding_ptr,
                        Invalid1155BatchTransferEncoding_length
                    )
                }

                // Update the offset position for the next loop
                nextElementHeadPtr := add(nextElementHeadPtr, OneWord)

                // Copy the first section of calldata (before dynamic values).
                calldatacopy(
                    BatchTransfer1155Params_ptr,
                    add(elementPtr, ConduitBatch1155Transfer_from_offset),
                    ConduitBatch1155Transfer_usable_head_size
                )

                // Determine size of calldata required for ids and amounts. Note
                // that the size includes both lengths as well as the data.
                let idsAndAmountsSize := add(TwoWords, mul(idsLength, TwoWords))

                // Update the offset for the data array in memory.
                mstore(
                    BatchTransfer1155Params_data_head_ptr,
                    add(
                        BatchTransfer1155Params_ids_length_offset,
                        idsAndAmountsSize
                    )
                )

                // Set the length of the data array in memory to zero.
                mstore(
                    add(
                        BatchTransfer1155Params_data_length_basePtr,
                        idsAndAmountsSize
                    ),
                    0
                )

                // Determine the total calldata size for the call to transfer.
                let transferDataSize := add(
                    BatchTransfer1155Params_calldata_baseSize,
                    idsAndAmountsSize
                )

                // Copy second section of calldata (including dynamic values).
                calldatacopy(
                    BatchTransfer1155Params_ids_length_ptr,
                    add(elementPtr, ConduitBatch1155Transfer_ids_length_offset),
                    idsAndAmountsSize
                )

                // Perform the call to transfer 1155 tokens.
                let success := call(
                    gas(),
                    token,
                    0,
                    ConduitBatch1155Transfer_from_offset, // Data portion start.
                    transferDataSize, // Location of the length of callData.
                    0,
                    0
                )

                // If the transfer reverted:
                if iszero(success) {
                    // If it returned a message, bubble it up as long as
                    // sufficient gas remains to do so:
                    if returndatasize() {
                        // Ensure that sufficient gas is available to copy
                        // returndata while expanding memory where necessary.
                        // Start by computing word size of returndata and
                        // allocated memory. Round up to the nearest full word.
                        let returnDataWords := div(
                            add(returndatasize(), AlmostOneWord),
                            OneWord
                        )

                        // Note: use transferDataSize in place of msize() to
                        // work around a Yul warning that prevents accessing
                        // msize directly when the IR pipeline is activated.
                        // The free memory pointer is not used here because
                        // this function does almost all memory management
                        // manually and does not update it, and transferDataSize
                        // should be the largest memory value used (unless a
                        // previous batch was larger).
                        let msizeWords := div(transferDataSize, OneWord)

                        // Next, compute the cost of the returndatacopy.
                        let cost := mul(CostPerWord, returnDataWords)

                        // Then, compute cost of new memory allocation.
                        if gt(returnDataWords, msizeWords) {
                            cost := add(
                                cost,
                                add(
                                    mul(
                                        sub(returnDataWords, msizeWords),
                                        CostPerWord
                                    ),
                                    div(
                                        sub(
                                            mul(
                                                returnDataWords,
                                                returnDataWords
                                            ),
                                            mul(msizeWords, msizeWords)
                                        ),
                                        MemoryExpansionCoefficient
                                    )
                                )
                            )
                        }

                        // Finally, add a small constant and compare to gas
                        // remaining; bubble up the revert data if enough gas is
                        // still available.
                        if lt(add(cost, ExtraGasBuffer), gas()) {
                            // Copy returndata to memory; overwrite existing.
                            returndatacopy(0, 0, returndatasize())

                            // Revert with memory region containing returndata.
                            revert(0, returndatasize())
                        }
                    }

                    // Set the error signature.
                    mstore(
                        0,
                        ERC1155BatchTransferGenericFailure_error_signature
                    )

                    // Write the token.
                    mstore(ERC1155BatchTransferGenericFailure_token_ptr, token)

                    // Increase the offset to ids by 32.
                    mstore(
                        BatchTransfer1155Params_ids_head_ptr,
                        ERC1155BatchTransferGenericFailure_ids_offset
                    )

                    // Increase the offset to amounts by 32.
                    mstore(
                        BatchTransfer1155Params_amounts_head_ptr,
                        add(
                            OneWord,
                            mload(BatchTransfer1155Params_amounts_head_ptr)
                        )
                    )

                    // Return modified region. The total size stays the same as
                    // `token` uses the same number of bytes as `data.length`.
                    revert(0, transferDataSize)
                }
            }

            // Reset the free memory pointer to the default value; memory must
            // be assumed to be dirtied and not reused from this point forward.
            // Also note that the zero slot is not reset to zero, meaning empty
            // arrays cannot be safely created or utilized until it is restored.
            mstore(FreeMemoryPointerSlot, DefaultFreeMemoryPointer)
        }
    }
}

File 12 of 14 : ConduitConstants.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

// error ChannelClosed(address channel)
uint256 constant ChannelClosed_error_signature = (
    0x93daadf200000000000000000000000000000000000000000000000000000000
);
uint256 constant ChannelClosed_error_ptr = 0x00;
uint256 constant ChannelClosed_channel_ptr = 0x4;
uint256 constant ChannelClosed_error_length = 0x24;

// For the mapping:
// mapping(address => bool) channels
// The position in storage for a particular account is:
// keccak256(abi.encode(account, channels.slot))
uint256 constant ChannelKey_channel_ptr = 0x00;
uint256 constant ChannelKey_slot_ptr = 0x20;
uint256 constant ChannelKey_length = 0x40;

File 13 of 14 : TokenTransferrerConstants.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

/*
 * -------------------------- Disambiguation & Other Notes ---------------------
 *    - The term "head" is used as it is in the documentation for ABI encoding,
 *      but only in reference to dynamic types, i.e. it always refers to the
 *      offset or pointer to the body of a dynamic type. In calldata, the head
 *      is always an offset (relative to the parent object), while in memory,
 *      the head is always the pointer to the body. More information found here:
 *      https://docs.soliditylang.org/en/v0.8.14/abi-spec.html#argument-encoding
 *        - Note that the length of an array is separate from and precedes the
 *          head of the array.
 *
 *    - The term "body" is used in place of the term "head" used in the ABI
 *      documentation. It refers to the start of the data for a dynamic type,
 *      e.g. the first word of a struct or the first word of the first element
 *      in an array.
 *
 *    - The term "pointer" is used to describe the absolute position of a value
 *      and never an offset relative to another value.
 *        - The suffix "_ptr" refers to a memory pointer.
 *        - The suffix "_cdPtr" refers to a calldata pointer.
 *
 *    - The term "offset" is used to describe the position of a value relative
 *      to some parent value. For example, OrderParameters_conduit_offset is the
 *      offset to the "conduit" value in the OrderParameters struct relative to
 *      the start of the body.
 *        - Note: Offsets are used to derive pointers.
 *
 *    - Some structs have pointers defined for all of their fields in this file.
 *      Lines which are commented out are fields that are not used in the
 *      codebase but have been left in for readability.
 */

uint256 constant AlmostOneWord = 0x1f;
uint256 constant OneWord = 0x20;
uint256 constant TwoWords = 0x40;
uint256 constant ThreeWords = 0x60;

uint256 constant FreeMemoryPointerSlot = 0x40;
uint256 constant ZeroSlot = 0x60;
uint256 constant DefaultFreeMemoryPointer = 0x80;

uint256 constant Slot0x80 = 0x80;
uint256 constant Slot0xA0 = 0xa0;
uint256 constant Slot0xC0 = 0xc0;

// abi.encodeWithSignature("transferFrom(address,address,uint256)")
uint256 constant ERC20_transferFrom_signature = (
    0x23b872dd00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC20_transferFrom_sig_ptr = 0x0;
uint256 constant ERC20_transferFrom_from_ptr = 0x04;
uint256 constant ERC20_transferFrom_to_ptr = 0x24;
uint256 constant ERC20_transferFrom_amount_ptr = 0x44;
uint256 constant ERC20_transferFrom_length = 0x64; // 4 + 32 * 3 == 100

// abi.encodeWithSignature(
//     "safeTransferFrom(address,address,uint256,uint256,bytes)"
// )
uint256 constant ERC1155_safeTransferFrom_signature = (
    0xf242432a00000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155_safeTransferFrom_sig_ptr = 0x0;
uint256 constant ERC1155_safeTransferFrom_from_ptr = 0x04;
uint256 constant ERC1155_safeTransferFrom_to_ptr = 0x24;
uint256 constant ERC1155_safeTransferFrom_id_ptr = 0x44;
uint256 constant ERC1155_safeTransferFrom_amount_ptr = 0x64;
uint256 constant ERC1155_safeTransferFrom_data_offset_ptr = 0x84;
uint256 constant ERC1155_safeTransferFrom_data_length_ptr = 0xa4;
uint256 constant ERC1155_safeTransferFrom_length = 0xc4; // 4 + 32 * 6 == 196
uint256 constant ERC1155_safeTransferFrom_data_length_offset = 0xa0;

// abi.encodeWithSignature(
//     "safeBatchTransferFrom(address,address,uint256[],uint256[],bytes)"
// )
uint256 constant ERC1155_safeBatchTransferFrom_signature = (
    0x2eb2c2d600000000000000000000000000000000000000000000000000000000
);

bytes4 constant ERC1155_safeBatchTransferFrom_selector = bytes4(
    bytes32(ERC1155_safeBatchTransferFrom_signature)
);

uint256 constant ERC721_transferFrom_signature = ERC20_transferFrom_signature;
uint256 constant ERC721_transferFrom_sig_ptr = 0x0;
uint256 constant ERC721_transferFrom_from_ptr = 0x04;
uint256 constant ERC721_transferFrom_to_ptr = 0x24;
uint256 constant ERC721_transferFrom_id_ptr = 0x44;
uint256 constant ERC721_transferFrom_length = 0x64; // 4 + 32 * 3 == 100

// abi.encodeWithSignature("NoContract(address)")
uint256 constant NoContract_error_signature = (
    0x5f15d67200000000000000000000000000000000000000000000000000000000
);
uint256 constant NoContract_error_sig_ptr = 0x0;
uint256 constant NoContract_error_token_ptr = 0x4;
uint256 constant NoContract_error_length = 0x24; // 4 + 32 == 36

// abi.encodeWithSignature(
//     "TokenTransferGenericFailure(address,address,address,uint256,uint256)"
// )
uint256 constant TokenTransferGenericFailure_error_signature = (
    0xf486bc8700000000000000000000000000000000000000000000000000000000
);
uint256 constant TokenTransferGenericFailure_error_sig_ptr = 0x0;
uint256 constant TokenTransferGenericFailure_error_token_ptr = 0x4;
uint256 constant TokenTransferGenericFailure_error_from_ptr = 0x24;
uint256 constant TokenTransferGenericFailure_error_to_ptr = 0x44;
uint256 constant TokenTransferGenericFailure_error_id_ptr = 0x64;
uint256 constant TokenTransferGenericFailure_error_amount_ptr = 0x84;

// 4 + 32 * 5 == 164
uint256 constant TokenTransferGenericFailure_error_length = 0xa4;

// abi.encodeWithSignature(
//     "BadReturnValueFromERC20OnTransfer(address,address,address,uint256)"
// )
uint256 constant BadReturnValueFromERC20OnTransfer_error_signature = (
    0x9889192300000000000000000000000000000000000000000000000000000000
);
uint256 constant BadReturnValueFromERC20OnTransfer_error_sig_ptr = 0x0;
uint256 constant BadReturnValueFromERC20OnTransfer_error_token_ptr = 0x4;
uint256 constant BadReturnValueFromERC20OnTransfer_error_from_ptr = 0x24;
uint256 constant BadReturnValueFromERC20OnTransfer_error_to_ptr = 0x44;
uint256 constant BadReturnValueFromERC20OnTransfer_error_amount_ptr = 0x64;

// 4 + 32 * 4 == 132
uint256 constant BadReturnValueFromERC20OnTransfer_error_length = 0x84;

uint256 constant ExtraGasBuffer = 0x20;
uint256 constant CostPerWord = 3;
uint256 constant MemoryExpansionCoefficient = 0x200;

// Values are offset by 32 bytes in order to write the token to the beginning
// in the event of a revert
uint256 constant BatchTransfer1155Params_ptr = 0x24;
uint256 constant BatchTransfer1155Params_ids_head_ptr = 0x64;
uint256 constant BatchTransfer1155Params_amounts_head_ptr = 0x84;
uint256 constant BatchTransfer1155Params_data_head_ptr = 0xa4;
uint256 constant BatchTransfer1155Params_data_length_basePtr = 0xc4;
uint256 constant BatchTransfer1155Params_calldata_baseSize = 0xc4;

uint256 constant BatchTransfer1155Params_ids_length_ptr = 0xc4;

uint256 constant BatchTransfer1155Params_ids_length_offset = 0xa0;
uint256 constant BatchTransfer1155Params_amounts_length_baseOffset = 0xc0;
uint256 constant BatchTransfer1155Params_data_length_baseOffset = 0xe0;

uint256 constant ConduitBatch1155Transfer_usable_head_size = 0x80;

uint256 constant ConduitBatch1155Transfer_from_offset = 0x20;
uint256 constant ConduitBatch1155Transfer_ids_head_offset = 0x60;
uint256 constant ConduitBatch1155Transfer_amounts_head_offset = 0x80;
uint256 constant ConduitBatch1155Transfer_ids_length_offset = 0xa0;
uint256 constant ConduitBatch1155Transfer_amounts_length_baseOffset = 0xc0;
uint256 constant ConduitBatch1155Transfer_calldata_baseSize = 0xc0;

// Note: abbreviated version of above constant to adhere to line length limit.
uint256 constant ConduitBatchTransfer_amounts_head_offset = 0x80;

uint256 constant Invalid1155BatchTransferEncoding_ptr = 0x00;
uint256 constant Invalid1155BatchTransferEncoding_length = 0x04;
uint256 constant Invalid1155BatchTransferEncoding_selector = (
    0xeba2084c00000000000000000000000000000000000000000000000000000000
);

uint256 constant ERC1155BatchTransferGenericFailure_error_signature = (
    0xafc445e200000000000000000000000000000000000000000000000000000000
);
uint256 constant ERC1155BatchTransferGenericFailure_token_ptr = 0x04;
uint256 constant ERC1155BatchTransferGenericFailure_ids_offset = 0xc0;

File 14 of 14 : TokenTransferrerErrors.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

/**
 * @title TokenTransferrerErrors
 */
interface TokenTransferrerErrors {
    /**
     * @dev Revert with an error when an ERC721 transfer with amount other than
     *      one is attempted.
     */
    error InvalidERC721TransferAmount();

    /**
     * @dev Revert with an error when attempting to fulfill an order where an
     *      item has an amount of zero.
     */
    error MissingItemAmount();

    /**
     * @dev Revert with an error when attempting to fulfill an order where an
     *      item has unused parameters. This includes both the token and the
     *      identifier parameters for native transfers as well as the identifier
     *      parameter for ERC20 transfers. Note that the conduit does not
     *      perform this check, leaving it up to the calling channel to enforce
     *      when desired.
     */
    error UnusedItemParameters();

    /**
     * @dev Revert with an error when an ERC20, ERC721, or ERC1155 token
     *      transfer reverts.
     *
     * @param token      The token for which the transfer was attempted.
     * @param from       The source of the attempted transfer.
     * @param to         The recipient of the attempted transfer.
     * @param identifier The identifier for the attempted transfer.
     * @param amount     The amount for the attempted transfer.
     */
    error TokenTransferGenericFailure(
        address token,
        address from,
        address to,
        uint256 identifier,
        uint256 amount
    );

    /**
     * @dev Revert with an error when a batch ERC1155 token transfer reverts.
     *
     * @param token       The token for which the transfer was attempted.
     * @param from        The source of the attempted transfer.
     * @param to          The recipient of the attempted transfer.
     * @param identifiers The identifiers for the attempted transfer.
     * @param amounts     The amounts for the attempted transfer.
     */
    error ERC1155BatchTransferGenericFailure(
        address token,
        address from,
        address to,
        uint256[] identifiers,
        uint256[] amounts
    );

    /**
     * @dev Revert with an error when an ERC20 token transfer returns a falsey
     *      value.
     *
     * @param token      The token for which the ERC20 transfer was attempted.
     * @param from       The source of the attempted ERC20 transfer.
     * @param to         The recipient of the attempted ERC20 transfer.
     * @param amount     The amount for the attempted ERC20 transfer.
     */
    error BadReturnValueFromERC20OnTransfer(
        address token,
        address from,
        address to,
        uint256 amount
    );

    /**
     * @dev Revert with an error when an account being called as an assumed
     *      contract does not have code and returns no data.
     *
     * @param account The account that should contain code.
     */
    error NoContract(address account);

    /**
     * @dev Revert with an error when attempting to execute an 1155 batch
     *      transfer using calldata not produced by default ABI encoding or with
     *      different lengths for ids and amounts arrays.
     */
    error Invalid1155BatchTransferEncoding();
}

Settings
{
  "viaIR": true,
  "optimizer": {
    "enabled": true,
    "runs": 1000000
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

Contract ABI

[{"inputs":[{"internalType":"address","name":"conduitController","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"bytes","name":"reason","type":"bytes"},{"internalType":"bytes32","name":"conduitKey","type":"bytes32"},{"internalType":"address","name":"conduit","type":"address"}],"name":"ConduitErrorRevertBytes","type":"error"},{"inputs":[{"internalType":"string","name":"reason","type":"string"},{"internalType":"bytes32","name":"conduitKey","type":"bytes32"},{"internalType":"address","name":"conduit","type":"address"}],"name":"ConduitErrorRevertString","type":"error"},{"inputs":[{"internalType":"bytes","name":"reason","type":"bytes"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"identifier","type":"uint256"}],"name":"ERC721ReceiverErrorRevertBytes","type":"error"},{"inputs":[{"internalType":"string","name":"reason","type":"string"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"identifier","type":"uint256"}],"name":"ERC721ReceiverErrorRevertString","type":"error"},{"inputs":[{"internalType":"bytes32","name":"conduitKey","type":"bytes32"},{"internalType":"address","name":"conduit","type":"address"}],"name":"InvalidConduit","type":"error"},{"inputs":[],"name":"InvalidERC20Identifier","type":"error"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"}],"name":"InvalidERC721Recipient","type":"error"},{"inputs":[],"name":"InvalidERC721TransferAmount","type":"error"},{"inputs":[],"name":"InvalidItemType","type":"error"},{"inputs":[],"name":"RecipientCannotBeZeroAddress","type":"error"},{"inputs":[{"components":[{"components":[{"internalType":"enum ConduitItemType","name":"itemType","type":"uint8"},{"internalType":"address","name":"token","type":"address"},{"internalType":"uint256","name":"identifier","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"}],"internalType":"struct TransferHelperItem[]","name":"items","type":"tuple[]"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"bool","name":"validateERC721Receiver","type":"bool"}],"internalType":"struct TransferHelperItemsWithRecipient[]","name":"items","type":"tuple[]"},{"internalType":"bytes32","name":"conduitKey","type":"bytes32"}],"name":"bulkTransfer","outputs":[{"internalType":"bytes4","name":"magicValue","type":"bytes4"}],"stateMutability":"nonpayable","type":"function"}]

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

00000000000000000000000000000000f9490004c11cef243f5400493c00ad63

-----Decoded View---------------
Arg [0] : conduitController (address): 0x00000000f9490004c11cef243f5400493c00ad63

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 00000000000000000000000000000000f9490004c11cef243f5400493c00ad63


Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.